From listoid1 at linkalarm.com Sat Jan 1 07:02:02 2005 From: listoid1 at linkalarm.com (George Bray) Date: Sat, 1 Jan 2005 17:02:02 +1100 Subject: [vlc] Re: debian sarge mcast In-Reply-To: <20041231074655.GA9758@kikal.org> References: <1F0C6352-5AC1-11D9-8959-000A95ACA8A6@linkalarm.com> <20041231074655.GA9758@kikal.org> Message-ID: On 31/12/2004, at 6:46 PM, Benjamin PRACHT wrote: >> But when I attempt to pick off a multicast stream, the following error >> shows in the log >> >> vlc no access_demux module matched "udp" >> > > This is a normal warning message, you should ignore it. If it doesn't > work, you should look for the cause somewhere else. What is your setup, > what is your command line ? Could you give us the whole debug info ? You're right! The cause was unsupported eth hardware (realtek). I've gone over to FC3 and all looks good. Thanks BigBen, happy new year all. geo -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jean-paul.saman at planet.nl Sun Jan 2 17:58:35 2005 From: jean-paul.saman at planet.nl (Jean-Paul Saman) Date: Sun, 02 Jan 2005 17:58:35 +0100 Subject: [vlc] Re: vlc streaming howto? In-Reply-To: <001a01c4ef70$f6535ad0$0401a8c0@work1> References: <001a01c4ef70$f6535ad0$0401a8c0@work1> Message-ID: <41D8283B.7030704@planet.nl> Disable the firewall on the Linux machine. Ricardo Kleemann wrote: > Spoke too soon... in WMP I have all of the protocols checked... but > when I try to access the mms stream, I get "server is not responding". > > I'm guessing something is wrong with the linux setup then. > Many greetings, Jean-Paul Saman. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Sun Jan 2 20:25:25 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sun, 2 Jan 2005 20:25:25 +0100 Subject: [vlc] Re: no audio? In-Reply-To: <000c01c4ef6a$638726b0$0401a8c0@work1> References: <000c01c4ef6a$638726b0$0401a8c0@work1> Message-ID: <20050102192525.GB24308@kikal.org> On Fri, Dec 31, 2004, Ricardo Kleemann wrote : > Hi, > > I'm running some tests with VLC and I'm having trouble getting audio saved > to the file. > > I can play from a capture device, the audio comes out ok. I can transmit a > captured stream to another computer, via UDP, and access on the other > computer, and the sound comes out fine. > > The problem is if I try to save to a file. I'll save it to a file and when > I play the file, there's no audio. I'm trying to save to a "wmv" format, > using ASF and I tried different audio codecs, but the file always comes out > with video only. > > I thought perhaps VLC wasn't capturing the audio properly, but if I can > hear the audio when I play the stream on a remote PC, then the audio must > be getting transmitted... it's just saving to the file that the audio > disappears. > > The parameters for saving the file: > ASF encapsulation > video codec DIV3 > audio codec I tried both mpga and mp2a and mp3 > > But the resulting file always has no audio... :-/ > Could you please send us the content of the view->message dialog when trying to save the stream ? -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Sun Jan 2 20:28:13 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sun, 2 Jan 2005 20:28:13 +0100 Subject: [vlc] Re: WinTV-PVR-350 In-Reply-To: <9360A1ADD818DD41A5EF0368C7A5AFB512A079@usplm231.amer.corp.eds.com> References: <9360A1ADD818DD41A5EF0368C7A5AFB512A079@usplm231.amer.corp.eds.com> Message-ID: <20050102192813.GC24308@kikal.org> On Thu, Dec 30, 2004, Hartsfield, Ben wrote : > Will Video Lan support WinTV-PVR-350 or WinTV-PVR-500 cards. > VLC has been supporting the PVR-350 under linux for quite a long time. Support under windows should begin to work in 0.8.1, and is fully implemented in svn. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Sun Jan 2 20:29:42 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sun, 2 Jan 2005 20:29:42 +0100 Subject: [vlc] Re: Streaming Subtitles & wmp with no video In-Reply-To: <000001c4eea0$f4182e60$0201a8c0@madman> References: <000001c4eea0$f4182e60$0201a8c0@madman> Message-ID: <20050102192942.GD24308@kikal.org> On Thu, Dec 30, 2004, Madman wrote : > WMP problem also has a solution: > > vcodec=mp43 ,instead of vcodec=div3 > > Now, It works fine, but It caused another problem :) Which is: Now my > working solution to include subtitle in the stream doesnt work anymore > :) It seems like asf stream or God knows what, prevents me from getting > what I want :) > > [00000382] stream_out_transcode private debug: creating subtitles > transcoding from fcc=`subt' to fcc=`dvbs' > [00000475] main decoder debug: looking for decoder module > [00000475] main decoder debug: probing 33 candidates > [00000475] subsdec decoder debug: using character encoding: ISO-8859-2 > [00000095] main module debug: using decoder module "subsdec" > [00000391] main private debug: adding a new input > [00000391] mux_asf private debug: adding input > [00000391] mux_asf private error: unhandled track type > [00000391] main private error: cannot add this stream > [00000447] main packetizer error: cannot create packetizer output > > Command line parameters: > > ./vlc -vvv /mnt/store/test.avi --sout > '#transcode{vcodec=mp43,acodec=mp3,vb=420,ab=64,scodec=dvbs,soverlay,wid > th=384,height=288,hq}:standard{access=http,mux=asf,url=_MY_SERVER_:6000} > ' --volume=1024 --sub-file=/mnt/store/test.srt --sout-all > --subsdec-encoding ISO-8859-2 --freetype-font > /usr/share/fonts/truetype/Courier_New_Bold.ttf --freetype-fontsize 20 > > (with "mux=ts" It still works fine) > > Try removing the scodec=dvbs part, it should be useless when using the soverlay option. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Sun Jan 2 20:51:45 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Sun, 2 Jan 2005 11:51:45 -0800 Subject: [vlc] Re: vlc streaming howto? References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> Message-ID: <001f01c4f104$7d38bc90$0401a8c0@work1> Hi, I believe the linux machine was not running any firewall settings... Ricardo ----- Original Message ----- From: "Jean-Paul Saman" To: Sent: Sunday, January 02, 2005 8:58 AM Subject: [vlc] Re: vlc streaming howto? > Disable the firewall on the Linux machine. > > Ricardo Kleemann wrote: > >> Spoke too soon... in WMP I have all of the protocols checked... but >> when I try to access the mms stream, I get "server is not responding". >> >> I'm guessing something is wrong with the linux setup then. >> > Many greetings, > > Jean-Paul Saman. > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jean-paul.saman at planet.nl Mon Jan 3 00:08:47 2005 From: jean-paul.saman at planet.nl (Jean-Paul Saman) Date: Mon, 03 Jan 2005 00:08:47 +0100 Subject: [vlc] Re: vlc streaming howto? In-Reply-To: <001f01c4f104$7d38bc90$0401a8c0@work1> References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> Message-ID: <41D87EFF.3020609@planet.nl> > > I believe the linux machine was not running any firewall settings... > Did you check? > >> Disable the firewall on the Linux machine. > > "Server not responding" is returned when you are trying to connect to a server with the wrong IP address, a route is missing or when there is a firewall in the way. I suggest you double check your network setup to be sure. Many greetings, Jean-Paul Saman. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From greg at orban.com Mon Jan 3 05:49:42 2005 From: greg at orban.com (Greg J. Ogonowski) Date: Sun, 02 Jan 2005 20:49:42 -0800 Subject: [vlc] AAC/HE-AAC/aacPlus Audio Streams - Icecast2 Message-ID: <6.1.2.0.2.20050102203443.12832fa0@66.220.31.130> I have disabled Burst-on-Connect temporarily on this eval Icecast2 server and verified that VLC Player works with this aacPlus stream: http://stream.orban.com:80/eval.aac The stream mountpoint must be named with a .aac extension, otherwise VLC Player is unable to determine the correct codec to use. As of Icecast2 Version 2.2, just released 21 December, the proper content type of audio/aac can now be used, so it is no longer necessary or desirable to rely on the .aac in the mountpoint name for VLC Player codec selection. I notice that VLC Player seems to handle Burst-on-Connect just fine from SHOUTcast servers. Here is an example SHOUTcast aacPlus stream: http://sc1.abacast.com:8019 Is there a major difference between the way VLC Player needs to handle Icecast2 and SHOUTcast Burst-on-Connect streams? Several other streams are listed here: http://www.opticodec.net http://www.tuner2.com I hope that these two changes can be made to VLC Player in the near future. I know the .aac should be fairly minor to fix, but Burst-on-Connect may be a bigger problem to solve. Burst-on-Connect is a very good feature, and works very well with Winamp for example. Please let me know if you would like me to turn Burst-on-Connect back on. Please also let me know if the streams play correctly on Linux and Macintosh. I have been unable to verify this 100%. They are aacPlus streams with 15kHz audio bandwidth, and with the proper SBR decoding should play full 15kHz bandwidth, not 7.5kHz. (I know RealPlayer Linux and Macintosh have this problem with RTSP aacPlus streams. RealPlayer Windows work OK. VLC Player Windows also works OK.) Thanks. -greg. __________________________________________________________________________ Greg J. Ogonowski VP Product Development ORBAN / CRL, Inc. 1525 Alvarado St. San Leandro, CA 94577 USA TEL +1 510 351-3500 FAX +1 510 351-0500 greg at orban.com http://www.orban.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From vincent.listes at ahoup.net Mon Jan 3 11:01:20 2005 From: vincent.listes at ahoup.net (Vincent Derrien) Date: Mon, 03 Jan 2005 11:01:20 +0100 Subject: [vlc] DVB with VLC Message-ID: <41D917F0.2000000@ahoup.net> Hi, I want to stream dvb with VLC, but it can't work. I've a Hauppauge Nova-S card : > lspci -v 0000:02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / Hauppauge WinTV-NOVA-CI DVB card There is the VLC command I'm using : vlc -vvv dvb: \ --program 12240 \ --dvb-frequency 12610000 \ --dvb-srate 22000000 \ --dvb-voltage 13 \ --dvb-adapter 0 \ --dvb-satno 1 \ --dvb-budget-mode \ --sout-all \ --ts-es-id-pid \ --ts-silent \ --sout udp:10.22.0.10 \ --ttl 12 And the VLC output : ... [00000250] dvb access debug: Opening device /dev/dvb/adapter0/frontend0 [00000250] dvb access debug: Frontend Info: [00000250] dvb access debug: name = STV0299/TSA5059/SL1935 based [00000250] dvb access debug: type = QPSK (DVB-S) [00000250] dvb access debug: frequency_min = 950000 (kHz) [00000250] dvb access debug: frequency_max = 2150000 (kHz) [00000250] dvb access debug: frequency_stepsize = 125 [00000250] dvb access debug: frequency_tolerance = 32000 [00000250] dvb access debug: symbol_rate_min = 1000000 (kHz) [00000250] dvb access debug: symbol_rate_max = 45000000 (kHz) [00000250] dvb access debug: symbol_rate_tolerance (ppm) = 500 [00000250] dvb access debug: notifier_delay (ms) = 0 [00000250] dvb access debug: Frontend Info capability list: [00000250] dvb access debug: inversion auto [00000250] dvb access debug: forward error correction 1/2 [00000250] dvb access debug: forward error correction 2/3 [00000250] dvb access debug: forward error correction 3/4 [00000250] dvb access debug: forward error correction 5/6 [00000250] dvb access debug: forward error correction 7/8 [00000250] dvb access debug: forward error correction auto [00000250] dvb access debug: card can do QPSK [00000250] dvb access debug: End of capability list [00000250] dvb access debug: trying to tune the frontend... [00000250] dvb access debug: using inversion=2 [00000250] dvb access debug: using fec=9 [00000250] dvb access debug: using voltage=13 [00000250] dvb access debug: using tone=1 [00000250] dvb access error: ioctl FE_SET_VOLTAGE failed, voltage=0 (-1) Operation not permitted [00000250] dvb access error: DVB-S: tuning failed [00000250] access_file access warning: cannot stat() file `' (No such file or directory) [00000250] main access warning: no access2 module matching "dvb" could be loaded [00000239] main input error: no suitable access module for `dvb:' ... Do you have an idea for this problem ? Thanks in advance. Regards, -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Mon Jan 3 11:14:19 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Mon, 3 Jan 2005 11:14:19 +0100 Subject: [vlc] Re: DVB with VLC In-Reply-To: <41D917F0.2000000@ahoup.net> References: <41D917F0.2000000@ahoup.net> Message-ID: <20050103101419.GA18818@kikal.org> On Mon, Jan 03, 2005, Vincent Derrien wrote : > Hi, > > I want to stream dvb with VLC, but it can't work. > > I've a Hauppauge Nova-S card : > > lspci -v > 0000:02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / > Hauppauge WinTV-NOVA-CI DVB card > > There is the VLC command I'm using : > vlc -vvv dvb: \ > --program 12240 \ > --dvb-frequency 12610000 \ > --dvb-srate 22000000 \ > --dvb-voltage 13 \ > --dvb-adapter 0 \ > --dvb-satno 1 \ > --dvb-budget-mode \ > --sout-all \ > --ts-es-id-pid \ > --ts-silent \ > --sout udp:10.22.0.10 \ > --ttl 12 > > And the VLC output : > ... > [00000250] dvb access debug: Opening device /dev/dvb/adapter0/frontend0 > [00000250] dvb access debug: Frontend Info: > [00000250] dvb access debug: name = STV0299/TSA5059/SL1935 based > [00000250] dvb access debug: type = QPSK (DVB-S) > [00000250] dvb access debug: frequency_min = 950000 (kHz) > [00000250] dvb access debug: frequency_max = 2150000 (kHz) > [00000250] dvb access debug: frequency_stepsize = 125 > [00000250] dvb access debug: frequency_tolerance = 32000 > [00000250] dvb access debug: symbol_rate_min = 1000000 (kHz) > [00000250] dvb access debug: symbol_rate_max = 45000000 (kHz) > [00000250] dvb access debug: symbol_rate_tolerance (ppm) = 500 > [00000250] dvb access debug: notifier_delay (ms) = 0 > [00000250] dvb access debug: Frontend Info capability list: > [00000250] dvb access debug: inversion auto > [00000250] dvb access debug: forward error correction 1/2 > [00000250] dvb access debug: forward error correction 2/3 > [00000250] dvb access debug: forward error correction 3/4 > [00000250] dvb access debug: forward error correction 5/6 > [00000250] dvb access debug: forward error correction 7/8 > [00000250] dvb access debug: forward error correction auto > [00000250] dvb access debug: card can do QPSK > [00000250] dvb access debug: End of capability list > [00000250] dvb access debug: trying to tune the frontend... > [00000250] dvb access debug: using inversion=2 > [00000250] dvb access debug: using fec=9 > [00000250] dvb access debug: using voltage=13 > [00000250] dvb access debug: using tone=1 > [00000250] dvb access error: ioctl FE_SET_VOLTAGE failed, voltage=0 (-1) > Operation not permitted Looks as if you don't have the required permissions to write on the device... > [00000250] dvb access error: DVB-S: tuning failed > [00000250] access_file access warning: cannot stat() file `' (No such > file or directory) > [00000250] main access warning: no access2 module matching "dvb" could > be loaded > [00000239] main input error: no suitable access module for `dvb:' > ... > > Do you have an idea for this problem ? > > Thanks in advance. > > Regards, > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From vincent.listes at ahoup.net Mon Jan 3 11:26:22 2005 From: vincent.listes at ahoup.net (Vincent Derrien) Date: Mon, 03 Jan 2005 11:26:22 +0100 Subject: [vlc] Re: DVB with VLC In-Reply-To: <20050103101419.GA18818@kikal.org> References: <41D917F0.2000000@ahoup.net> <20050103101419.GA18818@kikal.org> Message-ID: <41D91DCE.90306@ahoup.net> Benjamin PRACHT a ?crit : >On Mon, Jan 03, 2005, Vincent Derrien wrote : > > >>Hi, >> >>I want to stream dvb with VLC, but it can't work. >> >>I've a Hauppauge Nova-S card : >> >> >>>lspci -v >>> >>> >>0000:02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) >> Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / >>Hauppauge WinTV-NOVA-CI DVB card >> >>There is the VLC command I'm using : >>vlc -vvv dvb: \ >> --program 12240 \ >> --dvb-frequency 12610000 \ >> --dvb-srate 22000000 \ >> --dvb-voltage 13 \ >> --dvb-adapter 0 \ >> --dvb-satno 1 \ >> --dvb-budget-mode \ >> --sout-all \ >> --ts-es-id-pid \ >> --ts-silent \ >> --sout udp:10.22.0.10 \ >> --ttl 12 >> >>And the VLC output : >>... >>[00000250] dvb access debug: Opening device /dev/dvb/adapter0/frontend0 >>[00000250] dvb access debug: Frontend Info: >>[00000250] dvb access debug: name = STV0299/TSA5059/SL1935 based >>[00000250] dvb access debug: type = QPSK (DVB-S) >>[00000250] dvb access debug: frequency_min = 950000 (kHz) >>[00000250] dvb access debug: frequency_max = 2150000 (kHz) >>[00000250] dvb access debug: frequency_stepsize = 125 >>[00000250] dvb access debug: frequency_tolerance = 32000 >>[00000250] dvb access debug: symbol_rate_min = 1000000 (kHz) >>[00000250] dvb access debug: symbol_rate_max = 45000000 (kHz) >>[00000250] dvb access debug: symbol_rate_tolerance (ppm) = 500 >>[00000250] dvb access debug: notifier_delay (ms) = 0 >>[00000250] dvb access debug: Frontend Info capability list: >>[00000250] dvb access debug: inversion auto >>[00000250] dvb access debug: forward error correction 1/2 >>[00000250] dvb access debug: forward error correction 2/3 >>[00000250] dvb access debug: forward error correction 3/4 >>[00000250] dvb access debug: forward error correction 5/6 >>[00000250] dvb access debug: forward error correction 7/8 >>[00000250] dvb access debug: forward error correction auto >>[00000250] dvb access debug: card can do QPSK >>[00000250] dvb access debug: End of capability list >>[00000250] dvb access debug: trying to tune the frontend... >>[00000250] dvb access debug: using inversion=2 >>[00000250] dvb access debug: using fec=9 >>[00000250] dvb access debug: using voltage=13 >>[00000250] dvb access debug: using tone=1 >>[00000250] dvb access error: ioctl FE_SET_VOLTAGE failed, voltage=0 (-1) >>Operation not permitted >> >> > >Looks as if you don't have the required permissions to write on the >device... > > I've the required permissions (I launch vlc in root) : paracas:/dev/dvb# ls -ld adapter0/ drwxrwxrwx 2 root root 4096 Jan 3 10:54 adapter0/ paracas:/dev/dvb# ls -l adapter0/ total 0 crw-rw---- 1 root video 212, 1 Jan 3 10:54 audio0 crw-rw---- 1 root video 212, 6 Jan 3 10:54 ca0 crw-rw---- 1 root video 212, 4 Jan 3 10:54 demux0 crw-rw---- 1 root video 212, 5 Jan 3 10:54 dvr0 crw-rw---- 1 root video 212, 3 Jan 3 10:54 frontend0 crw-rw---- 1 root video 212, 7 Jan 3 10:54 net0 crw-rw---- 1 root video 212, 8 Jan 3 10:54 osd0 crw-rw---- 1 root video 212, 0 Jan 3 10:54 video0 > > >>[00000250] dvb access error: DVB-S: tuning failed >>[00000250] access_file access warning: cannot stat() file `' (No such >>file or directory) >>[00000250] main access warning: no access2 module matching "dvb" could >>be loaded >>[00000239] main input error: no suitable access module for `dvb:' >>... >> >>Do you have an idea for this problem ? >> >>Thanks in advance. >> >>Regards, >> >>-- >>This is the vlc mailing-list, see http://www.videolan.org/vlc/ >>To unsubscribe, please read http://www.videolan.org/support/lists.html >> >> >> -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From denishurtubise at sympatico.ca Mon Jan 3 11:46:20 2005 From: denishurtubise at sympatico.ca (denishurtubise) Date: Mon, 3 Jan 2005 05:46:20 -0500 Subject: [vlc] language settings Message-ID: HOW DO I CHANGE THE LANGUAGE ON THE MOVIE FROM ENGLISH TO FRENCH OR SPANISH TO ENGLISH ECT. THANKS DENIS -------------- next part -------------- An HTML attachment was scrubbed... URL: From schmidt.simon at gmail.com Mon Jan 3 18:40:01 2005 From: schmidt.simon at gmail.com (simon schmidt) Date: Mon, 03 Jan 2005 18:40:01 +0100 Subject: [vlc] Re: language settings In-Reply-To: References: Message-ID: <41D98371.7080407@gmail.com> denishurtubise wrote: > HOW DO I CHANGE THE LANGUAGE ON THE MOVIE FROM ENGLISH TO FRENCH OR > SPANISH TO ENGLISH ECT. > > > > > THANKS > > > DENIS If the movie has diffrent audio tracks you can switch in the "Audio->Audio Track" menu(in OS X may be diffrent in windows). If you want to change subtitles it's in "video->subtitles track" -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Mon Jan 3 19:12:25 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Mon, 3 Jan 2005 10:12:25 -0800 Subject: [vlc] Re: vlc streaming howto? References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> <41D87EFF.3020609@planet.nl> Message-ID: <003601c4f1bf$c796c190$0401a8c0@work1> Hi, I'm quite sure... just to be sure, here's the listing from iptables: # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Here's my vlc command line: # vlc -vvv udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=128,channels=2}:duplicate{dst=std{access=mmsh,mux=ts,url=:5012}} When I access via WMP, to mms://192.168.1.245:5012 I get a network error. I know the linux server (192.168.1.245) is receiving the stream; it just doesn't seem to be re-broadcasting it on port 5012 ----- Original Message ----- From: "Jean-Paul Saman" To: Sent: Sunday, January 02, 2005 3:08 PM Subject: [vlc] Re: vlc streaming howto? > >> >> I believe the linux machine was not running any firewall settings... >> > Did you check? > >> >>> Disable the firewall on the Linux machine. >> >> > "Server not responding" is returned when you are trying to connect to a > server with the wrong IP address, a route is missing or when there is a > firewall in the way. > > I suggest you double check your network setup to be sure. > > Many greetings, > Jean-Paul Saman. > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jean-paul.saman at planet.nl Mon Jan 3 19:56:58 2005 From: jean-paul.saman at planet.nl (Jean-Paul Saman) Date: Mon, 03 Jan 2005 19:56:58 +0100 Subject: [vlc] Re: vlc streaming howto? In-Reply-To: <003601c4f1bf$c796c190$0401a8c0@work1> References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> <41D87EFF.3020609@planet.nl> <003601c4f1bf$c796c190$0401a8c0@work1> Message-ID: <41D9957A.6050709@planet.nl> Ricardo Kleemann wrote: > I'm quite sure... just to be sure, here's the listing from iptables: This is convincing ;-) > Here's my vlc command line: > # vlc -vvv > udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=128,channels=2}:duplicate{dst=std{access=mmsh,mux=ts,url=:5012}} Did you try url=192.168.1.xxx:5012 ? with the ip address of the client? Kind greetings, Jean-Paul Saman. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Mon Jan 3 20:01:14 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Mon, 3 Jan 2005 11:01:14 -0800 Subject: [vlc] Re: vlc streaming howto? References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> <41D87EFF.3020609@planet.nl> <003601c4f1bf$c796c190$0401a8c0@work1> <41D9957A.6050709@planet.nl> Message-ID: <005101c4f1c6$99107df0$0401a8c0@work1> But I'm not pushing to the client, I'm making the stream available on the server, on port 5012, and the client (WMP) is attempting to access the server (192.168.1.245) at port 5012 ----- Original Message ----- From: "Jean-Paul Saman" To: Sent: Monday, January 03, 2005 10:56 AM Subject: [vlc] Re: vlc streaming howto? > Ricardo Kleemann wrote: > >> I'm quite sure... just to be sure, here's the listing from iptables: > > This is convincing ;-) > >> Here's my vlc command line: >> # vlc -vvv >> udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=128,channels=2}:duplicate{dst=std{access=mmsh,mux=ts,url=:5012}} > > Did you try url=192.168.1.xxx:5012 ? with the ip address of the client? > > Kind greetings, > Jean-Paul Saman. > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jfburns at gmail.com Mon Jan 3 20:23:08 2005 From: jfburns at gmail.com (James Burns) Date: Mon, 3 Jan 2005 14:23:08 -0500 Subject: [vlc] Re: vlc streaming howto? In-Reply-To: <005101c4f1c6$99107df0$0401a8c0@work1> References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> <41D87EFF.3020609@planet.nl> <003601c4f1bf$c796c190$0401a8c0@work1> <41D9957A.6050709@planet.nl> <005101c4f1c6$99107df0$0401a8c0@work1> Message-ID: <77114b905010311237139a33@mail.gmail.com> You might want to be explicit about the server address instead of using @ so that it gets bound to the interface which your client is trying to access. Otherwise it could get bound to an alternate or localhost interface. -James On Mon, 3 Jan 2005 11:01:14 -0800, Ricardo Kleemann wrote: > But I'm not pushing to the client, I'm making the stream available on the > server, on port 5012, and the client (WMP) is attempting to access the > server (192.168.1.245) at port 5012 > > > ----- Original Message ----- > From: "Jean-Paul Saman" > To: > Sent: Monday, January 03, 2005 10:56 AM > Subject: [vlc] Re: vlc streaming howto? > > > Ricardo Kleemann wrote: > > > >> I'm quite sure... just to be sure, here's the listing from iptables: > > > > This is convincing ;-) > > > >> Here's my vlc command line: > >> # vlc -vvv > >> udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=128,channels=2}:duplicate{dst=std{access=mmsh,mux=ts,url=:5012}} > > > > Did you try url=192.168.1.xxx:5012 ? with the ip address of the client? > > > > Kind greetings, > > Jean-Paul Saman. > > > > -- > > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > > To unsubscribe, please read http://www.videolan.org/support/lists.html > > > > > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- "We are friends with those whose ideas are at the same level of confusion as our own." - Proust -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Mon Jan 3 23:42:42 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Mon, 3 Jan 2005 14:42:42 -0800 Subject: [vlc] Re: vlc streaming howto? References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> <41D87EFF.3020609@planet.nl> <003601c4f1bf$c796c190$0401a8c0@work1> <41D9957A.6050709@planet.nl> <005101c4f1c6$99107df0$0401a8c0@work1> <77114b905010311237139a33@mail.gmail.com> Message-ID: <008f01c4f1e5$89d503a0$0401a8c0@work1> Thanks. Still no luck. This is the vlc command: vlc udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=64,channels=2}:duplicate{dst=std{access=mmsh,mux=asfh,url=192.168.1.245:5012}} I know the udp://@:5010 *is* working because it plays back the stream... however the re-transmission (access=mmsh,mux=asfh,url=192.168.1.245:5012) doesn't seem to work because WMP is reporting a network error I also tried accessing udp://@192.168.1.245:5012 via VLC rather than WMP and it didn't work. So there's something definitely wrong with the setup. Is the command above correct for what I'm trying to do? ----- Original Message ----- From: "James Burns" To: Sent: Monday, January 03, 2005 11:23 AM Subject: [vlc] Re: vlc streaming howto? > You might want to be explicit about the server address instead of > using @ so that it gets bound to the interface which your client is > trying to access. Otherwise it could get bound to an alternate or > localhost interface. > > -James > > On Mon, 3 Jan 2005 11:01:14 -0800, Ricardo Kleemann > wrote: >> But I'm not pushing to the client, I'm making the stream available on the >> server, on port 5012, and the client (WMP) is attempting to access the >> server (192.168.1.245) at port 5012 >> >> >> ----- Original Message ----- >> From: "Jean-Paul Saman" >> To: >> Sent: Monday, January 03, 2005 10:56 AM >> Subject: [vlc] Re: vlc streaming howto? >> >> > Ricardo Kleemann wrote: >> > >> >> I'm quite sure... just to be sure, here's the listing from iptables: >> > >> > This is convincing ;-) >> > >> >> Here's my vlc command line: >> >> # vlc -vvv >> >> udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=128,channels=2}:duplicate{dst=std{access=mmsh,mux=ts,url=:5012}} >> > >> > Did you try url=192.168.1.xxx:5012 ? with the ip address of the >> > client? >> > >> > Kind greetings, >> > Jean-Paul Saman. >> > >> > -- >> > This is the vlc mailing-list, see http://www.videolan.org/vlc/ >> > To unsubscribe, please read http://www.videolan.org/support/lists.html >> > >> > >> >> -- >> This is the vlc mailing-list, see http://www.videolan.org/vlc/ >> To unsubscribe, please read http://www.videolan.org/support/lists.html >> >> > > > -- > "We are friends with those whose ideas are at the same level of > confusion as our own." - Proust > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dermot at dspsrv.com Tue Jan 4 17:16:05 2005 From: dermot at dspsrv.com (Dermot McGahon) Date: Tue, 04 Jan 2005 16:16:05 -0000 Subject: [vlc] Re: Performance Issues on VIA box In-Reply-To: <01EC5964-5A73-11D9-8B2F-000393D55072@m0k.org> References: <160803e304123006287224cc5d@mail.gmail.com> <01EC5964-5A73-11D9-8B2F-000393D55072@m0k.org> Message-ID: On Thu, 30 Dec 2004 15:56:38 +0100, Eric Petit wrote: > On Dec 30, 2004, at 15:28, Kristinn Soffanias Runarsson wrote: >> Hi guys... I'm having framedrops and stuff on a VIA box, with a Nehemia >> 800mhz >> Playing both MPEG2 and MPEG4... These worked fine on a 466mhz PII >> machine... > Make sure you have overlay acceleration (the title of the video window > should say "XVideo", or "X11" otherwise). X11 is slow as hell, and these > boxes often require a 3rd-party graphic driver to have overlay working. > Once overlay is working, there's little you can do though... Check the processor usage with top or similar. I'm watching fullscreen PAL video at the moment using a similar board/processor and processor usage is at 60%. The video chipset is VIA CLE266 which does have xvideo support through the unichrome.sf.net via driver. Your Alwell box also only has 64MB RAM. The main thing you need is a decent graphics driver and I'm not sure what if any is a good driver for that graphics chipset. Dermot. -- -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From stefano at salvi.mn.it Tue Jan 4 17:29:16 2005 From: stefano at salvi.mn.it (Stefano Salvi) Date: Tue, 04 Jan 2005 17:29:16 +0100 Subject: [vlc] Problems with GPE interface (segfaults) Message-ID: <41DAC45C.3050801@salvi.mn.it> I'm running VLC 0.7.1 Bond on an iPAQ h5555 running Familiar v0.8.0 end GPE. If I run VLC as root all goes well. If I try to run it as a normal user, it segfaults. I tried to run the 'rc' interface and the playback is good also as a normal user. If I add -vvvv parameter, lhe last lines of the report are as follows: ........ [00000169] main module debug: using gui-helper module "gtk2_main" [00000166] main module debug: using interface module "pda" [00000172] main interface debug: interface initialized [00000172] main interface debug: thread 65541 (manager) created at priority 0 (src/interface/interface.c:145) [00000172] pda interface debug: Starting pda GTK2+ interface thread (:2847): Gtk-CRITICAL **: file gtkwidget.c: line 5593 (gtk_widget_set_size_request): assertion `width >= -1' failed [00000172] pda interface debug: Changing to dir . Segmentation fault ----- If I run it as root, I see: ...... (:2765): Gtk-CRITICAL **: file gtkwidget.c: line 5593 (gtk_widget_set_size_request): assertion `width >= -1' failed [00000172] pda interface debug: Changing to dir . [00000172] pda interface debug: Manage GTK keyboard events using threads ---- and then the interface pops up. Is this a bug or only a problem with permissions? There is some permission I must grant (on devices or files) to work around this problem? Thank you Stefano Salvi -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dermot at dspsrv.com Tue Jan 4 17:38:28 2005 From: dermot at dspsrv.com (Dermot McGahon) Date: Tue, 04 Jan 2005 16:38:28 -0000 Subject: [vlc] Re: vlc streaming howto? In-Reply-To: <001701c4ef70$bca879f0$0401a8c0@work1> References: <001701c4ef70$bca879f0$0401a8c0@work1> Message-ID: On Fri, 31 Dec 2004 11:41:32 -0800, Ricardo Kleemann wrote: > The fact that the terminal window outputs a bunch of garbage (it's not > messages, just garbled text) and that it only does it when the stream is > being played, indicates to me that it actually is receiving the stream. Sounds like it is using the aalib and trying to render the video as ascii. Dermot. -- -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Wed Jan 5 05:32:14 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Tue, 4 Jan 2005 20:32:14 -0800 Subject: [vlc] Re: vlc streaming howto? References: <001a01c4ef70$f6535ad0$0401a8c0@work1> <41D8283B.7030704@planet.nl> <001f01c4f104$7d38bc90$0401a8c0@work1> <41D87EFF.3020609@planet.nl> <003601c4f1bf$c796c190$0401a8c0@work1> <41D9957A.6050709@planet.nl> <005101c4f1c6$99107df0$0401a8c0@work1> <77114b905010311237139a33@mail.gmail.com> Message-ID: <003201c4f2df$87f90810$0401a8c0@work1> Hi folks, I finally got this work, I had to change the vlc command as follows: vlc udp://@:5010 --sout '#transcode{vcodec=DIV3,vb=512,acodec=mp3,ab=64,channels=2}:duplicate{dst=std{access=mmsh,mux=asfh,url=192.168.1.245:5012}}' That works under linux. Now, the stream is output to port 5012 and I can access via WMP! However, I'm having another problem. As you can see by the command line, the output to port 5012 has a bitrate of 512.. So I tried to also use VLC to access that stream on 5012 and output it to a file. I basically ran this: vlc mmsh://192.168.1.245:5012 --sout '#duplicate{dst=std{access=file,mux=asf,url="/tmp/test1.wmv"}}' So, I'm expecting to get a file /tmp/test1.wmv which has a bitrate of roughly 512. I'm not attempting to do any transcoding, I'm taking it as-is since the stream is already transcoded with the other command. But what happens is I get file with a bitrate of roughly 1024, and not only that, the audio is not synchronized with the video. If I try to put transcoding parameters, I end up getting a video that basically runs in slow motion, I'm not sure why. Any ideas what's going on here? Thanks Ricardo ----- Original Message ----- From: "James Burns" To: Sent: Monday, January 03, 2005 11:23 AM Subject: [vlc] Re: vlc streaming howto? > You might want to be explicit about the server address instead of > using @ so that it gets bound to the interface which your client is > trying to access. Otherwise it could get bound to an alternate or > localhost interface. > > -James > > On Mon, 3 Jan 2005 11:01:14 -0800, Ricardo Kleemann > wrote: >> But I'm not pushing to the client, I'm making the stream available on the >> server, on port 5012, and the client (WMP) is attempting to access the >> server (192.168.1.245) at port 5012 >> >> >> ----- Original Message ----- >> From: "Jean-Paul Saman" >> To: >> Sent: Monday, January 03, 2005 10:56 AM >> Subject: [vlc] Re: vlc streaming howto? >> >> > Ricardo Kleemann wrote: >> > >> >> I'm quite sure... just to be sure, here's the listing from iptables: >> > >> > This is convincing ;-) >> > >> >> Here's my vlc command line: >> >> # vlc -vvv >> >> udp://@:5010:sout=#transcode{vcodec=DIV3,vb=256,scale=1,acodec=mp3,ab=128,channels=2}:duplicate{dst=std{access=mmsh,mux=ts,url=:5012}} >> > >> > Did you try url=192.168.1.xxx:5012 ? with the ip address of the >> > client? >> > >> > Kind greetings, >> > Jean-Paul Saman. >> > >> > -- >> > This is the vlc mailing-list, see http://www.videolan.org/vlc/ >> > To unsubscribe, please read http://www.videolan.org/support/lists.html >> > >> > >> >> -- >> This is the vlc mailing-list, see http://www.videolan.org/vlc/ >> To unsubscribe, please read http://www.videolan.org/support/lists.html >> >> > > > -- > "We are friends with those whose ideas are at the same level of > confusion as our own." - Proust > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From aherzog at insight.com Mon Jan 3 19:23:52 2005 From: aherzog at insight.com (Angie Herzog) Date: Mon, 3 Jan 2005 11:23:52 -0700 Subject: [vlc] Development software Message-ID: <992B610415A2064B8B785F05C5BC14970145F7BA@hqexch1.insight.com> Hello, I am a sales rep for Insight. My customer asked if I could get a price for VLC Development Software. I was given part number OEM PDK. Is this the correct part number and how much is a license? I am not familair with this product so any information you could provide would be very helpfull. Thanks, Angie Insight Account Team Angie Herzog Inside Sales Representative Phone: 800-467-4448 x5850 Fax: 480-760-8001 Email: aherzog at insight.com John Mitchell Strategic Account Manager Direct: 800-805-3074 Fax: 480-760-8409 Email: jmitchel at insight.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From christianbrooker at ukonline.co.uk Mon Jan 3 20:38:45 2005 From: christianbrooker at ukonline.co.uk (Christian Brooker) Date: Mon, 3 Jan 2005 19:38:45 -0000 Subject: [vlc] videolan suggestion Message-ID: Hi, great software! im only a very new user of videolan and ive noticed a few things instantly that i think might make the player a bit better.. 1. in the playlist it comes up with the directory and filename of the file until you actually play that file when it comes up with just the filename... maybe if you can tweak the playlist so that it only comes up with the filename, or maybe the ID3 tag of the mp3. then you could have other columns with the title, artist and length of the song/movie. 2. minimise to tray... 3. when if not minimised and is in the background and then you click on vlc thing in the taskbar it only comes up with the last selected window. ie, if the playlist was the last thing in focus and then i click on another program (without minimising vlc) and then decide to come back to vlc by clicking on the icon in the taskbar it will only show the playlist and the main window will stay in the background. 4. point number 1 is the biggest niggle... cheers for such a good program though. i really like it apart from those little niggles mentioned above! Regards, Christian Brooker Website Manager christianbrooker at ukonline.co.uk Mb: +44 (0) 77 8212 1276 http://www.southamptondiving.co.uk http://www.divingnsw.org.au -------------- next part -------------- An HTML attachment was scrubbed... URL: From Bastian at mailueberfall.de Tue Jan 4 14:13:15 2005 From: Bastian at mailueberfall.de (Bastian at mailueberfall.de) Date: Tue, 4 Jan 2005 14:13:15 +0100 (MET) Subject: [vlc] Filemirror Message-ID: <30806.1104844395@www12.gmx.net> Hello VLC Team, do you need an VLC Mirrot @ Germany? If you need please inform me about the montly traffic and I will see what I can do :) regards Bastian W. -- +++ Sparen Sie mit GMX DSL +++ http://www.gmx.net/de/go/dsl AKTION f?r Wechsler: DSL-Tarife ab 3,99 EUR/Monat + Startguthaben -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From admin at via.ecp.fr Wed Jan 5 10:46:30 2005 From: admin at via.ecp.fr (System administration) Date: Wed, 5 Jan 2005 10:46:30 +0100 Subject: [vlc] [MOD] play-howto-en PDF Message-ID: <20050105094629.GA21600@via.ecp.fr> The deleted attachment is at: -- System administration VIA, Ecole Centrale Paris, France -------------- next part -------------- An embedded message was scrubbed... From: Cecil Watson Subject: play-howto-en PDF Date: Mon, 03 Jan 2005 01:36:50 -0800 Size: 2129 URL: From Remi.Denis-Courmont at via.ecp.fr Wed Jan 5 10:53:57 2005 From: Remi.Denis-Courmont at via.ecp.fr (=?utf-8?q?R=C3=A9mi_Denis-Courmont?=) Date: Wed, 5 Jan 2005 10:53:57 +0100 Subject: [vlc] Re: Development software In-Reply-To: <992B610415A2064B8B785F05C5BC14970145F7BA@hqexch1.insight.com> References: <992B610415A2064B8B785F05C5BC14970145F7BA@hqexch1.insight.com> Message-ID: <200501051054.01160.Remi.Denis-Courmont@via.ecp.fr> Le Lundi 3 Janvier 2005 19:23, Angie Herzog a ?crit : > I am a sales rep for Insight. My customer asked if I could get a > price for VLC Development Software. I was given part number OEM PDK. > Is this the correct part number and how much is a license? I am not > familair with this product so any information you could provide would > be very helpfull. VLC is free software, and is released under the GNU General Public License (GPL). You can pay for it if you want to, but it is available for free from our website's download section. If you redistribute it, whether for a fee or not, you have to comply with the terms of GPL license. That essentially means you don't misreprensent the authorship of the program and you provide your customers with a way to obtain the program's source code. If you didn't modify the program, giving a link to our website will be sufficient. -- R?mi Denis-Courmont Student-engineer at the Ecole Centrale Paris System administrator at VIA Centrale-R?seaux http://www.simphalempin.com/home/infos/cv.shtml.en -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From bigben+spam at videolan.org Wed Jan 5 10:58:52 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 5 Jan 2005 10:58:52 +0100 Subject: [vlc] Re: Development software In-Reply-To: <992B610415A2064B8B785F05C5BC14970145F7BA@hqexch1.insight.com> References: <992B610415A2064B8B785F05C5BC14970145F7BA@hqexch1.insight.com> Message-ID: <20050105095852.GA18155@kikal.org> On Mon, Jan 03, 2005, Angie Herzog wrote : > Hello, > > I am a sales rep for Insight. My customer asked if I could get a price > for VLC Development Software. I was given part number OEM PDK. > > Is this the correct part number and how much is a license? I am not > familair with this product so any information you could provide would be > very helpfull. > > Thanks, > > Angie > VLC is free software, released under the term of the GPL. As a consequence, its source code is freely available for everyone. You can have a look at http://developers.videolan.org/ for a descroiption of the way to get the sourceode, and for an (incomplete) description of VLC's external and internal APIs. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From admin at via.ecp.fr Wed Jan 5 11:01:47 2005 From: admin at via.ecp.fr (System administration) Date: Wed, 5 Jan 2005 11:01:47 +0100 Subject: [vlc] [MOD] Skin submission Message-ID: <20050105100147.GB12124@via.ecp.fr> The deleted attachment is at: -- System administration VIA, Ecole Centrale Paris, France -------------- next part -------------- An embedded message was scrubbed... From: "David Stotijn" Subject: Skin submission Date: Wed, 5 Jan 2005 03:23:37 +0100 Size: 5692 URL: From admin at via.ecp.fr Wed Jan 5 11:08:03 2005 From: admin at via.ecp.fr (System administration) Date: Wed, 5 Jan 2005 11:08:03 +0100 Subject: [vlc] [MOD] strange problem Message-ID: <20050105100803.GC12124@via.ecp.fr> The deleted attachment is at: and -- System administration VIA, Ecole Centrale Paris, France -------------- next part -------------- An embedded message was scrubbed... From: Andrea Rimondi Subject: strange problem Date: Fri, 31 Dec 2004 14:28:24 +0100 Size: 5562 URL: From dionoea at via.ecp.fr Wed Jan 5 13:55:19 2005 From: dionoea at via.ecp.fr (Antoine Cellerier) Date: Wed, 5 Jan 2005 13:55:19 +0100 Subject: [vlc] Re: Filemirror In-Reply-To: <30806.1104844395@www12.gmx.net> References: <30806.1104844395@www12.gmx.net> Message-ID: <20050105125519.GD4076@via.ecp.fr> Hello, On Tue, Jan 04, 2005, Bastian at mailueberfall.de wrote: > do you need an VLC Mirrot @ Germany? If you need please inform me about the > montly traffic and I will see what I can do :) We would be happy to have a downloads mirror in Germany. I don't have a clue about monthly traffic on the mirrors. Our main ftp server (VIA) currently serves 1.4 TB per week (which is mainly videolan related stuff - downloads). I doubt that the other mirrors handle as much traffic. Feel free to ask any other questions you might have. Thanks for your support to the VideoLAN projet, -- dionoea -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dionoea at via.ecp.fr Wed Jan 5 16:11:42 2005 From: dionoea at via.ecp.fr (Antoine Cellerier) Date: Wed, 5 Jan 2005 16:11:42 +0100 Subject: [vlc] Re: [MOD] Skin submission In-Reply-To: <20050105100147.GB12124@via.ecp.fr> References: <20050105100147.GB12124@via.ecp.fr> Message-ID: <20050105151142.GA6405@via.ecp.fr> Hello, > I'd like to submit a VLC skin I've made. It's called "The OSkin", a skin > based on the tv show "The O.C.". > > If you have any questions about it just drop me a line. Your skin looks nice :) I think it just misses some details like the playlist window or even some customised border for the video window. I don't know what other people think about it but we can put it on the skins2 download page :) -- dionoea PS: try not to mail attachements to the mailing list but give a link to a webpage where it can be found. It's easier for mailing lists moderators. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jean-paul.saman at planet.nl Wed Jan 5 21:07:19 2005 From: jean-paul.saman at planet.nl (Jean-Paul Saman) Date: Wed, 05 Jan 2005 21:07:19 +0100 Subject: [vlc] Re: Problems with GPE interface (segfaults) In-Reply-To: <41DAC45C.3050801@salvi.mn.it> References: <41DAC45C.3050801@salvi.mn.it> Message-ID: <41DC48F7.3060307@planet.nl> Hi stefano, A few questions about how you trigger this problem: Try starting VLC from the GUI? Or is this behaviour only when starting from a shell? If it is a shell, then are you trying to run it over an ssh connection with your workstation? Stefano Salvi wrote: > I'm running VLC 0.7.1 Bond on an iPAQ h5555 running Familiar v0.8.0 > end GPE. > If I run VLC as root all goes well. > If I try to run it as a normal user, it segfaults. > I tried to run the 'rc' interface and the playback is good also as a > normal user. > If I add -vvvv parameter, lhe last lines of the report are as follows: > ........ > [00000169] main module debug: using gui-helper module "gtk2_main" > [00000166] main module debug: using interface module "pda" > [00000172] main interface debug: interface initialized > [00000172] main interface debug: thread 65541 (manager) created at > priority 0 (src/interface/interface.c:145) > [00000172] pda interface debug: Starting pda GTK2+ interface thread > > (:2847): Gtk-CRITICAL **: file gtkwidget.c: line 5593 > (gtk_widget_set_size_request): assertion `width >= -1' failed > [00000172] pda interface debug: Changing to dir . > Segmentation fault Looks like a bug to me. > ----- > If I run it as root, I see: > ...... > (:2765): Gtk-CRITICAL **: file gtkwidget.c: line 5593 > (gtk_widget_set_size_request): assertion `width >= -1' failed > [00000172] pda interface debug: Changing to dir . > [00000172] pda interface debug: Manage GTK keyboard events using threads > ---- > and then the interface pops up. > Is this a bug or only a problem with permissions? Might be permission related. Could you check the permissions on the current dir where you launch VLC? > There is some permission I must grant (on devices or files) to work > around this problem? Greetings, Jean-Paul Saman -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Wed Jan 5 15:52:05 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Wed, 5 Jan 2005 09:52:05 -0500 Subject: [vlc] Audio eats memory when PTS is not stable Message-ID: <20050105145123.47703B542@krishna.via.ecp.fr> All, When there are audio problems on a feed, the audio logic eats memory real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am watching a live feed and there appears to be PTS problems. The audio logic eats about 600KB of memory every second. Needless to say, on Windows CE it doesn't run for long. This line is the memory status from Windows CE. I added it to messages.c to print the memory load after every log message. load = 21, total = 96493568, avail = 76939264 **start of log access_udp access debug: opening server=:0 local=224.2.1.250:3000 load = 13, total = 96493568, avail = 84205568 main access debug: net: connecting to ':0 at 224.2.1.250:3000' load = 13, total = 96493568, avail = 84197376 main access debug: looking for network module load = 13, total = 96493568, avail = 84197376 main access debug: probing 1 candidate load = 13, total = 96493568, avail = 84193280 ipv4 access debug: IP_ADD_MEMBERSHIP multicast request load = 13, total = 96493568, avail = 84185088 main module debug: using network module "ipv4" load = 13, total = 96493568, avail = 84185088 main module debug: unlocking module "ipv4" load = 13, total = 96493568, avail = 84185088 main module debug: using access2 module "access_udp" load = 13, total = 96493568, avail = 84185088 main private debug: pre buffering load = 13, total = 96493568, avail = 84172800 access_udp access debug: detected TS over raw UDP load = 13, total = 96493568, avail = 84172800 main private debug: received first data for our buffer load = 13, total = 96493568, avail = 84172800 main input debug: thread 651034538 (input) created at priority 2 (C:\Projects\GapViewCom\wcevlc0_8_0\vlc-0.8.0\src\input\input.c:228) load = 13, total = 96493568, avail = 84168704 main private debug: prebuffering done 21056 bytes in 0s - 156 kbytes/s load = 13, total = 96493568, avail = 84049920 main input debug: demux2_New: access='udp' demux='' path='@224.2.1.250:3000' load = 13, total = 96493568, avail = 84049920 main demuxer debug: looking for demux2 module load = 13, total = 96493568, avail = 84049920 main demuxer debug: probing 12 candidates load = 13, total = 96493568, avail = 84041728 mp4 demuxer warning: MP4 plugin discarded (not a valid file) load = 13, total = 96493568, avail = 84041728 mpga demuxer debug: plugin_mpga: Open load = 13, total = 96493568, avail = 84041728 main demuxer debug: looking for id3 module load = 13, total = 96493568, avail = 84041728 main demuxer debug: probing 0 candidates load = 13, total = 96493568, avail = 84037632 main demuxer error: no id3 module matched "any" load = 13, total = 96493568, avail = 84037632 mpgv demuxer debug: plugin_mpgv: Open load = 13, total = 96493568, avail = 84037632 mpgv demuxer warning: ES module discarded (no startcode) load = 13, total = 96493568, avail = 84033536 nsv demuxer warning: NSV module discarded load = 13, total = 96493568, avail = 84033536 playlist demuxer warning: old import module discarded: invalid file load = 13, total = 96493568, avail = 84033536 playlist demuxer warning: pls import module discarded load = 13, total = 96493568, avail = 84033536 ts demuxer debug: plugin_ts:Open load = 13, total = 96493568, avail = 84029440 main module debug: using demux2 module "ts" load = 14, total = 96493568, avail = 83689472 ts demuxer debug: DEMUX_SET_GROUP 0 00000000 load = 14, total = 96493568, avail = 83685376 main input debug: `udp://@224.2.1.250:3000' sucessfully opened load = 14, total = 96493568, avail = 83685376 ts demuxer debug: pid[1360] unknown load = 14, total = 96493568, avail = 83685376 ts demuxer debug: pid[1320] unknown load = 14, total = 96493568, avail = 83681280 main input debug: control type=1 load = 14, total = 96493568, avail = 83673088 ts demuxer debug: PATCallBack called load = 14, total = 96493568, avail = 83537920 ts demuxer debug: new PAT ts_id=1 version=2 current_next=1 load = 14, total = 96493568, avail = 83537920 ts demuxer debug: * number=1 pid=5403 load = 14, total = 96493568, avail = 83537920 ts demuxer debug: PMTCallBack called load = 14, total = 96493568, avail = 83529728 ts demuxer debug: new PMT program number=1 version=1 pid_pcr=1360 load = 14, total = 96493568, avail = 83529728 ts demuxer debug: * es pid=1360 type=2 fcc=mpgv load = 14, total = 96493568, avail = 83529728 main input debug: Selecting program id=1 load = 14, total = 96493568, avail = 83529728 main decoder debug: looking for decoder module load = 14, total = 96493568, avail = 83525632 main decoder debug: probing 8 candidates load = 14, total = 96493568, avail = 83525632 main module debug: using decoder module "fixed32tofloat32" load = 15, total = 96493568, avail = 82251776 main decoder debug: thread -422744334 (decoder) created at priority 4 (C:\Projects\GapViewCom\wcevlc0_8_0\vlc-0.8.0\src\input\decoder.c:157) load = 15, total = 96493568, avail = 82247680 ts demuxer debug: * es pid=1320 type=3 fcc=mpga load = 15, total = 96493568, avail = 82239488 main decoder debug: looking for decoder module load = 15, total = 96493568, avail = 82231296 main decoder debug: probing 8 candidates load = 15, total = 96493568, avail = 82231296 mpeg_audio decoder debug: mpeg_audio.c: OpenDecoder 6167706D load = 15, total = 96493568, avail = 82227200 main module debug: using decoder module "mpeg_audio" load = 15, total = 96493568, avail = 82223104 main decoder debug: thread 651374182 (decoder) created at priority 1 (C:\Projects\GapViewCom\wcevlc0_8_0\vlc-0.8.0\src\input\decoder.c:157) load = 15, total = 96493568, avail = 82219008 ts demuxer warning: first packet for pid=1360 cc=0xc load = 15, total = 96493568, avail = 82219008 ts demuxer warning: first packet for pid=1320 cc=0x1 load = 15, total = 96493568, avail = 82219008 fixed32tofloat32 decoder debug: 720x480, aspect 576000, 29.971 fps load = 15, total = 96493568, avail = 82051072 main decoder debug: no usable vout present, spawning one load = 15, total = 96493568, avail = 82051072 main video output debug: looking for video output module load = 15, total = 96493568, avail = 82030592 main video output debug: probing 2 candidates load = 15, total = 96493568, avail = 82030592 vout_directx video output debug: creating DirectXEventThread load = 15, total = 96493568, avail = 82030592 main private debug: waiting for thread completion load = 16, total = 96493568, avail = 82018304 vout_directx video output debug: DirectXCreateWindow load = 16, total = 96493568, avail = 82006016 vout_directx video output debug: Created video sub-window load = 16, total = 96493568, avail = 82006016 main private debug: thread 112111126 (DirectX Events Thread) created at priority 0 (C:\Projects\GapViewCom\wcevlc0_8_0\vlc-0.8.0\modules\video_output\directx\d irectx.c:260) load = 16, total = 96493568, avail = 81997824 vout_directx video output debug: DirectXEventThread running load = 16, total = 96493568, avail = 81997824 vout_directx video output debug: DirectXInitDDraw load = 16, total = 96493568, avail = 81993728 vout_directx video output debug: screen dimensions (0x0,640x480) load = 16, total = 96493568, avail = 81969152 vout_directx video output debug: DirectDraw Capabilities: overlay=1 yuvoverlay=1 can_deinterlace_overlay=1 colorkey=1 stretch=1 bltfourcc=1 load = 16, total = 96493568, avail = 81969152 vout_directx video output debug: End DirectXInitDDraw load = 16, total = 96493568, avail = 81969152 vout_directx video output debug: DirectXCreateDisplay load = 16, total = 96493568, avail = 81969152 vout_directx video output debug: DirectXCreateClipper load = 16, total = 96493568, avail = 81965056 main module debug: using video output module "vout_directx" load = 16, total = 96493568, avail = 81965056 main video output debug: waiting for thread completion load = 16, total = 96493568, avail = 81956864 vout_directx video output debug: NewPictureVec overlay:no chroma:YV12 load = 16, total = 96493568, avail = 81932288 vout_directx video output debug: created plain surface of chroma:RV16 load = 16, total = 96493568, avail = 81235968 vout_directx video output debug: End NewPictureVec (succeeded) load = 16, total = 96493568, avail = 81235968 main video output debug: got 1 direct buffer(s) load = 16, total = 96493568, avail = 81231872 main video output debug: picture in 720x480, chroma 0x30323449 (I420), aspect ratio 4:3 load = 16, total = 96493568, avail = 81231872 main video output debug: picture out 720x480, chroma 0x36315652 (RV16), aspect ratio 4:3 load = 16, total = 96493568, avail = 81227776 main video output debug: looking for chroma module load = 16, total = 96493568, avail = 81227776 main video output debug: probing 3 candidates load = 16, total = 96493568, avail = 81227776 main module debug: using chroma module "i420_rgb" load = 16, total = 96493568, avail = 81211392 main video output debug: indirect render, mapping render pictures 0-7 to system pictures 1-8 load = 16, total = 96493568, avail = 81211392 main video output debug: thread -2035588642 (video output) created at priority 2 (C:\Projects\GapViewCom\wcevlc0_8_0\vlc-0.8.0\src\video_output\video_output. c:443) load = 16, total = 96493568, avail = 81178624 main private warning: dts != current_pts (-107166) load = 17, total = 96493568, avail = 80658432 main private warning: backward_pts != current_pts (-33356) load = 17, total = 96493568, avail = 80121856 mpeg_audio decoder: MPGA channels:2 samplerate:48000 bitrate:192 load = 21, total = 96493568, avail = 76947456 main decoder debug: no aout present, spawning one load = 21, total = 96493568, avail = 76939264 main audio output debug: looking for audio output module load = 21, total = 96493568, avail = 76939264 main audio output debug: probing 2 candidates load = 21, total = 96493568, avail = 76939264 waveout audio output warning: waveOutOpen failed WAVERR_BADFORMAT load = 21, total = 96493568, avail = 76939264 waveout audio output debug: device supports 2 channels load = 21, total = 96493568, avail = 76939264 waveout audio output warning: waveOutOpen failed WAVERR_BADFORMAT load = 21, total = 96493568, avail = 76939264 waveout audio output debug: device supports 1 channel load = 21, total = 96493568, avail = 76939264 waveout audio output warning: waveOutOpen failed WAVERR_BADFORMAT load = 21, total = 96493568, avail = 76931072 main private debug: thread -1503809754 (waveOut Notification Thread) created at priority 1 (C:\Projects\GapViewCom\wcevlc0_8_0\vlc-0.8.0\modules\audio_output\waveout.c :315) load = 21, total = 96493568, avail = 76886016 main module debug: using audio output module "waveout" load = 21, total = 96493568, avail = 76886016 main audio output debug: output 's16l' 48000 Hz Stereo/Left frame=1 samples/4 bytes load = 21, total = 96493568, avail = 76886016 main audio output debug: mixer 's16l' 48000 Hz Stereo/Left frame=1 samples/4 bytes load = 21, total = 96493568, avail = 76886016 main audio output debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo/Left->Stereo/Left load = 21, total = 96493568, avail = 76886016 main private debug: looking for audio filter module load = 21, total = 96493568, avail = 76881920 main private debug: probing 11 candidates load = 21, total = 96493568, avail = 76877824 mpgatofix32 private debug: mpgatoflfi32: Create: 32336C66 load = 21, total = 96493568, avail = 76877824 main module debug: using audio filter module "float32tos16" load = 21, total = 96493568, avail = 76877824 main audio output debug: found a filter for the whole conversion load = 21, total = 96493568, avail = 76877824 main audio output debug: looking for audio mixer module load = 21, total = 96493568, avail = 76877824 main audio output debug: probing 2 candidates load = 21, total = 96493568, avail = 76873728 main module debug: using audio mixer module "trivial_mixer" load = 21, total = 96493568, avail = 76873728 main audio output debug: input 'mpga' 48000 Hz Dual-mono frame=1152 samples/1161 bytes load = 21, total = 96493568, avail = 76873728 main audio output debug: filter(s) 'mpga'->'fl32' 48000 Hz->48000 Hz Dual-mono->Stereo/Left load = 21, total = 96493568, avail = 76873728 main private debug: looking for audio filter module load = 21, total = 96493568, avail = 76873728 main private debug: probing 11 candidates load = 21, total = 96493568, avail = 76869632 mpgatofix32 private debug: mpgatoflfi32: Create: 6167706D load = 21, total = 96493568, avail = 76869632 main private debug: looking for audio filter module load = 21, total = 96493568, avail = 76869632 main private debug: probing 11 candidates load = 21, total = 96493568, avail = 76869632 mpgatofix32 private debug: mpgatoflfi32: Create: 6167706D load = 21, total = 96493568, avail = 76865536 main module debug: using audio filter module "mpgatofix32" load = 21, total = 96493568, avail = 76832768 main private debug: looking for audio filter module load = 21, total = 96493568, avail = 76828672 main private debug: probing 11 candidates load = 21, total = 96493568, avail = 76828672 mpgatofix32 private debug: mpgatoflfi32: Create: 32336C66 load = 21, total = 96493568, avail = 76828672 main module debug: using audio filter module "trivial_channel_mixer" load = 21, total = 96493568, avail = 76828672 main audio output debug: found 2 filters for the whole conversion load = 21, total = 96493568, avail = 76828672 main audio output debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo/Left->Stereo/Left load = 21, total = 96493568, avail = 76824576 main private debug: looking for audio filter module load = 21, total = 96493568, avail = 76820480 main private debug: probing 11 candidates load = 21, total = 96493568, avail = 76816384 mpgatofix32 private debug: mpgatoflfi32: Create: 32336C66 load = 21, total = 96493568, avail = 76816384 main module debug: using audio filter module "ugly_resampler" load = 21, total = 96493568, avail = 76816384 main audio output debug: found a filter for the whole conversion load = 21, total = 96493568, avail = 76816384 main private debug: stream periodicity changed from P[5] to P[7] load = 21, total = 96493568, avail = 76238848 main video output warning: late picture skipped (29467) load = 23, total = 96493568, avail = 74756096 main video output warning: late picture skipped (-2900) load = 23, total = 96493568, avail = 74756096 main video output warning: late picture skipped (-4355) load = 23, total = 96493568, avail = 74756096 main audio output debug: audio output is too slow (41356), trashing 21333us load = 23, total = 96493568, avail = 74698752 main video output warning: late picture skipped (20889) load = 23, total = 96493568, avail = 74698752 main video output warning: late picture skipped (64012) load = 23, total = 96493568, avail = 74665984 main video output warning: late picture skipped (31612) load = 23, total = 96493568, avail = 74665984 main video output warning: late picture skipped (323) load = 23, total = 96493568, avail = 74665984 main audio output warning: output date isn't PTS date, requesting resampling (72340) load = 23, total = 96493568, avail = 74665984 main audio output warning: PTS is out of range (-7755), dropping buffer load = 23, total = 96493568, avail = 74665984 main audio output warning: PTS is out of range (-35855), dropping buffer load = 23, total = 96493568, avail = 74665984 main video output warning: late picture skipped (41723) load = 23, total = 96493568, avail = 74567680 main video output warning: late picture skipped (10467) load = 23, total = 96493568, avail = 74567680 main audio output debug: audio output is too slow (79350), trashing 21334us load = 23, total = 96493568, avail = 74567680 main audio output debug: audio output is too slow (60016), trashing 21333us load = 23, total = 96493568, avail = 74567680 main audio output warning: output date isn't PTS date, requesting resampling (44830) load = 23, total = 96493568, avail = 74567680 main video output warning: late picture skipped (45312) load = 23, total = 96493568, avail = 74510336 main video output warning: late picture skipped (12823) load = 23, total = 96493568, avail = 74510336 main audio output warning: computed PTS is out of range (54519), clearing out load = 23, total = 96493568, avail = 74502144 main audio output warning: PTS is out of range (122145), dropping buffer load = 23, total = 96493568, avail = 74502144 main audio output warning: output PTS is out of range (76186), clearing out load = 23, total = 96493568, avail = 74502144 main audio output warning: PTS is out of range (97623), dropping buffer load = 23, total = 96493568, avail = 74502144 main audio output warning: PTS is out of range (74623), dropping buffer load = 23, total = 96493568, avail = 74498048 main audio output warning: PTS is out of range (51623), dropping buffer load = 23, total = 96493568, avail = 74498048 main audio output warning: PTS is out of range (28623), dropping buffer load = 23, total = 96493568, avail = 74498048 main audio output warning: PTS is out of range (5623), dropping buffer load = 23, total = 96493568, avail = 74498048 main audio output warning: PTS is out of range (-17377), dropping buffer load = 23, total = 96493568, avail = 74498048 main audio output debug: audio output is too slow (55623), trashing 21333us load = 23, total = 96493568, avail = 74338304 main audio output warning: computed PTS is out of range (14623), clearing out load = 23, total = 96493568, avail = 74338304 main audio output warning: PTS is out of range (15623), dropping buffer load = 23, total = 96493568, avail = 74338304 main audio output warning: output PTS is out of range (22957), clearing out load = 23, total = 96493568, avail = 74338304 main audio output warning: PTS is out of range (-12822), dropping buffer load = 23, total = 96493568, avail = 74338304 main audio output warning: PTS is out of range (-35822), dropping buffer load = 23, total = 96493568, avail = 74338304 main video output warning: late picture skipped (100300) load = 24, total = 96493568, avail = 74248192 main video output warning: late picture skipped (66656) load = 24, total = 96493568, avail = 74248192 main video output warning: late picture skipped (33545) load = 24, total = 96493568, avail = 74248192 main video output warning: late picture skipped (989) load = 24, total = 96493568, avail = 74248192 main audio output debug: audio output is too slow (44178), trashing 21333us load = 24, total = 96493568, avail = 74235904 main video output warning: late picture skipped (60278) load = 24, total = 96493568, avail = 74039296 main video output warning: late picture skipped (27467) load = 24, total = 96493568, avail = 74039296 main video output warning: late picture skipped (-4777) load = 24, total = 96493568, avail = 74039296 main video output warning: late picture skipped (9045) load = 24, total = 96493568, avail = 74027008 main video output warning: late picture skipped (-22266) load = 24, total = 96493568, avail = 74027008 main audio output debug: audio output is too slow (78179), trashing 21334us load = 24, total = 96493568, avail = 73977856 main audio output debug: audio output is too slow (58845), trashing 21333us load = 24, total = 96493568, avail = 73977856 main video output warning: late picture skipped (17067) load = 24, total = 96493568, avail = 73977856 main video output warning: late picture skipped (-16422) load = 24, total = 96493568, avail = 73977856 main video output warning: late picture skipped (245) load = 24, total = 96493568, avail = 73789440 main audio output debug: audio output is too slow (44845), trashing 21333us load = 24, total = 96493568, avail = 73789440 main audio output warning: output date isn't PTS date, requesting resampling (65496) load = 24, total = 96493568, avail = 73789440 main video output warning: late picture skipped (-4322) load = 24, total = 96493568, avail = 73781248 main audio output warning: buffer is 61830 late, triggering upsampling load = 24, total = 96493568, avail = 73748480 main video output warning: late picture skipped (7700) load = 24, total = 96493568, avail = 73601024 main video output warning: late picture skipped (26134) load = 24, total = 96493568, avail = 73523200 main video output warning: late picture skipped (-5000) load = 24, total = 96493568, avail = 73523200 main video output warning: late picture skipped (3012) load = 24, total = 96493568, avail = 73523200 main audio output debug: audio output is too slow (97349), trashing 21333us load = 25, total = 96493568, avail = 73297920 main audio output debug: audio output is too slow (78016), trashing 21333us load = 25, total = 96493568, avail = 73297920 main audio output debug: audio output is too slow (57683), trashing 21334us load = 25, total = 96493568, avail = 73297920 main video output warning: late picture skipped (37423) load = 25, total = 96493568, avail = 73297920 main video output warning: late picture skipped (4412) load = 25, total = 96493568, avail = 73297920 main video output warning: late picture skipped (24012) load = 25, total = 96493568, avail = 73285632 main video output warning: late picture skipped (-8033) load = 25, total = 96493568, avail = 73285632 main audio output warning: PTS is out of range (-30122), dropping buffer load = 25, total = 96493568, avail = 73285632 main audio output debug: audio output is too slow (44683), trashing 21334us load = 25, total = 96493568, avail = 73129984 main audio output warning: output date isn't PTS date, requesting resampling (65333) load = 25, total = 96493568, avail = 73129984 main private debug: decoded 104/104 pictures load = 25, total = 96493568, avail = 73129984 main video output warning: late picture skipped (17700) load = 25, total = 96493568, avail = 73129984 main audio output debug: audio output is too slow (67016), trashing 21333us load = 25, total = 96493568, avail = 73060352 main audio output debug: audio output is too slow (46683), trashing 21333us load = 25, total = 96493568, avail = 73060352 main video output warning: late picture skipped (60367) load = 25, total = 96493568, avail = 73060352 main video output warning: late picture skipped (27356) load = 25, total = 96493568, avail = 73060352 main video output warning: late picture skipped (-5022) load = 25, total = 96493568, avail = 73060352 main audio output warning: PTS is out of range (55223), dropping buffer load = 25, total = 96493568, avail = 73060352 main audio output warning: PTS is out of range (28200), dropping buffer load = 25, total = 96493568, avail = 73060352 main audio output warning: PTS is out of range (5200), dropping buffer load = 25, total = 96493568, avail = 73060352 main audio output warning: PTS is out of range (-16800), dropping buffer load = 25, total = 96493568, avail = 73060352 main audio output warning: PTS is out of range (-39800), dropping buffer load = 25, total = 96493568, avail = 73060352 main video output warning: late picture skipped (48967) load = 25, total = 96493568, avail = 73007104 main video output warning: late picture skipped (16478) load = 25, total = 96493568, avail = 73007104 main video output warning: late picture skipped (-16488) load = 25, total = 96493568, avail = 73007104 main audio output warning: output PTS is out of range (350), clearing out load = 25, total = 96493568, avail = 73007104 main audio output warning: input PTS is out of range (9724), trashing load = 25, total = 96493568, avail = 73007104 main video output warning: late picture skipped (14989) load = 25, total = 96493568, avail = 72835072 main video output warning: late picture skipped (-16722) load = 25, total = 96493568, avail = 72835072 main video output warning: late picture skipped (5923) load = 25, total = 96493568, avail = 72667136 main audio output debug: audio output is too slow (61058), trashing 21333us load = 25, total = 96493568, avail = 72572928 main audio output debug: audio output is too slow (41725), trashing 21334us load = 25, total = 96493568, avail = 72572928 main video output warning: late picture skipped (35845) load = 25, total = 96493568, avail = 72572928 main video output warning: late picture skipped (4323) load = 25, total = 96493568, avail = 72572928 main video output warning: late picture skipped (43445) load = 25, total = 96493568, avail = 72560640 main video output warning: late picture skipped (11100) load = 25, total = 96493568, avail = 72560640 main audio output warning: computed PTS is out of range (77724), clearing out load = 25, total = 96493568, avail = 72560640 main audio output warning: PTS is out of range (50978), dropping buffer load = 25, total = 96493568, avail = 72560640 main audio output warning: output PTS is out of range (85058), clearing out load = 25, total = 96493568, avail = 72560640 main audio output warning: PTS is out of range (26334), dropping buffer load = 25, total = 96493568, avail = 72560640 main audio output warning: PTS is out of range (3334), dropping buffer load = 25, total = 96493568, avail = 72560640 main audio output warning: PTS is out of range (-19666), dropping buffer load = 25, total = 96493568, avail = 72560640 main video output warning: late picture skipped (88423) load = 25, total = 96493568, avail = 72388608 main video output warning: late picture skipped (56789) load = 25, total = 96493568, avail = 72388608 main video output warning: late picture skipped (24112) load = 25, total = 96493568, avail = 72388608 main video output warning: late picture skipped (-8066) load = 25, total = 96493568, avail = 72388608 main audio output warning: PTS is out of range (-12666), dropping buffer load = 25, total = 96493568, avail = 72388608 main audio output warning: output PTS is out of range (1668), clearing out load = 25, total = 96493568, avail = 72388608 main audio output warning: input PTS is out of range (13334), trashing load = 25, total = 96493568, avail = 72388608 main audio output warning: PTS is out of range (-29611), dropping buffer load = 25, total = 96493568, avail = 72388608 main audio output warning: buffer is 51945 in advance, triggering downsampling load = 25, total = 96493568, avail = 72388608 main audio output warning: input PTS is out of range (1334), trashing load = 25, total = 96493568, avail = 72388608 main audio output debug: audio output is too slow (88334), trashing 21333us load = 26, total = 96493568, avail = 72286208 main audio output debug: audio output is too slow (69001), trashing 21333us load = 26, total = 96493568, avail = 72286208 main audio output debug: audio output is too slow (48668), trashing 21333us load = 26, total = 96493568, avail = 72286208 main video output warning: late picture skipped (88600) load = 26, total = 96493568, avail = 72286208 main video output warning: late picture skipped (57278) load = 26, total = 96493568, avail = 72286208 main video output warning: late picture skipped (25900) load = 26, total = 96493568, avail = 72286208 main video output warning: late picture skipped (-5922) load = 26, total = 96493568, avail = 72286208 main audio output warning: computed PTS is out of range (67334), clearing out load = 26, total = 96493568, avail = 72286208 main audio output warning: timing screwed, stopping resampling load = 26, total = 96493568, avail = 72286208 main audio output warning: PTS is out of range (18389), dropping buffer load = 26, total = 96493568, avail = 72286208 main audio output warning: output PTS is out of range (87335), clearing out load = 26, total = 96493568, avail = 72286208 main audio output warning: PTS is out of range (-7155), dropping buffer load = 26, total = 96493568, avail = 72286208 main audio output warning: PTS is out of range (-28155), dropping buffer load = 26, total = 96493568, avail = 72286208 main video output warning: late picture skipped (47967) load = 26, total = 96493568, avail = 72224768 main video output warning: late picture skipped (15589) load = 26, total = 96493568, avail = 72224768 main audio output debug: audio output is too slow (69845), trashing 21333us load = 26, total = 96493568, avail = 72077312 main audio output debug: audio output is too slow (50512), trashing 21333us load = 26, total = 96493568, avail = 72077312 main video output warning: late picture skipped (67945) load = 26, total = 96493568, avail = 72077312 main video output warning: late picture skipped (35589) load = 26, total = 96493568, avail = 72077312 main video output warning: late picture skipped (2934) load = 26, total = 96493568, avail = 72077312 main audio output warning: computed PTS is out of range (34845), clearing out load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (35845), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output warning: output PTS is out of range (52846), clearing out load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (11300), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (-11700), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (-34700), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output debug: audio output is starving (28700), playing silence load = 26, total = 96493568, avail = 71962624 main video output warning: late picture skipped (44267) load = 26, total = 96493568, avail = 71962624 main video output warning: late picture skipped (11912) load = 26, total = 96493568, avail = 71962624 main audio output warning: computed PTS is out of range (4300), clearing out load = 26, total = 96493568, avail = 71962624 main audio output warning: PTS is out of range (6300), dropping buffer load = 26, total = 96493568, avail = 71962624 main audio output warning: output PTS is out of range (23634), clearing out load = 26, total = 96493568, avail = 71962624 main audio output warning: PTS is out of range (-13566), dropping buffer load = 26, total = 96493568, avail = 71962624 main audio output warning: PTS is out of range (-36566), dropping buffer load = 26, total = 96493568, avail = 71962624 main audio output debug: audio output is too slow (40434), trashing 21333us load = 26, total = 96493568, avail = 71757824 main video output warning: late picture skipped (104845) load = 26, total = 96493568, avail = 71618560 main video output warning: late picture skipped (73845) load = 26, total = 96493568, avail = 71618560 main video output warning: late picture skipped (42189) load = 26, total = 96493568, avail = 71618560 main video output warning: late picture skipped (8356) load = 26, total = 96493568, avail = 71618560 main audio output debug: audio output is too slow (62435), trashing 21334us load = 26, total = 96493568, avail = 71569408 main audio output debug: audio output is too slow (43101), trashing 21333us load = 26, total = 96493568, avail = 71569408 main audio output warning: output date isn't PTS date, requesting resampling (40248) load = 26, total = 96493568, avail = 71569408 main video output warning: late picture skipped (61367) load = 26, total = 96493568, avail = 71569408 main video output warning: late picture skipped (29012) load = 26, total = 96493568, avail = 71569408 main video output warning: late picture skipped (-2211) load = 26, total = 96493568, avail = 71569408 main audio output warning: buffer is 41714 late, triggering upsampling load = 26, total = 96493568, avail = 71553024 main video output warning: late picture skipped (35378) load = 27, total = 96493568, avail = 71389184 main video output warning: late picture skipped (3767) load = 27, total = 96493568, avail = 71389184 main video output warning: late picture skipped (16078) load = 27, total = 96493568, avail = 71380992 main video output warning: late picture skipped (-16822) load = 27, total = 96493568, avail = 71380992 main video output warning: late picture skipped (16456) load = 27, total = 96493568, avail = 71196672 main video output warning: late picture skipped (-16366) load = 27, total = 96493568, avail = 71196672 main video output warning: late picture skipped (-5166) load = 27, total = 96493568, avail = 71168000 main video output warning: late picture skipped (-26588) load = 27, total = 96493568, avail = 71168000 main video output warning: late picture skipped (11267) load = 27, total = 96493568, avail = 71139328 main video output warning: late picture skipped (-21111) load = 27, total = 96493568, avail = 71139328 main video output warning: late picture skipped (-222) load = 27, total = 96493568, avail = 70991872 main video output warning: late picture skipped (-6466) load = 27, total = 96493568, avail = 70959104 main audio output debug: audio output is too slow (40853), trashing 21333us load = 27, total = 96493568, avail = 70959104 main audio output warning: output date isn't PTS date, requesting resampling (42171) load = 27, total = 96493568, avail = 70959104 main audio output warning: timing screwed, stopping resampling load = 27, total = 96493568, avail = 70938624 main audio output warning: buffer is 91010 late, triggering upsampling load = 27, total = 96493568, avail = 70938624 main video output warning: late picture skipped (17389) load = 27, total = 96493568, avail = 70803456 main video output warning: late picture skipped (-14444) load = 27, total = 96493568, avail = 70803456 main video output warning: late picture skipped (-1466) load = 27, total = 96493568, avail = 70762496 main video output warning: late picture skipped (-544) load = 27, total = 96493568, avail = 70750208 main video output warning: late picture skipped (5489) load = 27, total = 96493568, avail = 70565888 main video output warning: late picture skipped (25445) load = 27, total = 96493568, avail = 70541312 main video output warning: late picture skipped (-5800) load = 27, total = 96493568, avail = 70541312 main video output warning: late picture skipped (14834) load = 28, total = 96493568, avail = 70365184 main audio output debug: audio output is too slow (133016), trashing 21334us load = 28, total = 96493568, avail = 70209536 main audio output debug: audio output is too slow (113682), trashing 21333us load = 28, total = 96493568, avail = 70209536 main audio output debug: audio output is too slow (93349), trashing 21333us load = 28, total = 96493568, avail = 70209536 main audio output debug: audio output is too slow (73016), trashing 21334us load = 28, total = 96493568, avail = 70209536 main audio output debug: audio output is too slow (52682), trashing 21333us ** end of log -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Wed Jan 5 19:20:11 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Wed, 5 Jan 2005 13:20:11 -0500 Subject: [vlc] Secondary audio Message-ID: <20050105181858.53161B531@krishna.via.ecp.fr> Does VLC support secondary audio? We have a feed that has two audio streams in it and from what we can tell, the second channel just eats memory. We are running on Windows CE 5.0 using vlc 0.7.1 -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Wed Jan 5 19:25:30 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Wed, 5 Jan 2005 13:25:30 -0500 Subject: [vlc] VLC eats memory with PTS errors Message-ID: <20050105182411.60E7AB433@krishna.via.ecp.fr> I am running VLC 0.7. on Windows CE 5.0. I have noticed that when you get PTS errors in the audio that it seems to eat memory. This also appears to happen on VLC 0.8.0 on Windows 98. It isn't as noticeable on my Windows 98 because it has a lot more memory. Here is part of the log main audio output debug: audio output is too slow (50512), trashing 21333us load = 26, total = 96493568, avail = 72077312 main video output warning: late picture skipped (67945) load = 26, total = 96493568, avail = 72077312 main video output warning: late picture skipped (35589) load = 26, total = 96493568, avail = 72077312 main video output warning: late picture skipped (2934) load = 26, total = 96493568, avail = 72077312 main audio output warning: computed PTS is out of range (34845), clearing out load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (35845), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output warning: output PTS is out of range (52846), clearing out load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (11300), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (-11700), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output warning: PTS is out of range (-34700), dropping buffer load = 26, total = 96493568, avail = 72077312 main audio output debug: audio output is starving (28700), playing silence load = 26, total = 96493568, avail = 71962624 main video output warning: late picture skipped (44267) load = 26, total = 96493568, avail = 71962624 main video output warning: late picture skipped (11912) load = 26, total = 96493568, avail = 71962624 main audio output warning: computed PTS is out of range (4300), clearing out load = 26, total = 96493568, avail = 71962624 main audio output warning: PTS is out of range (6300), dropping buffer load = 26, total = 96493568, avail = 71962624 main audio output warning: output PTS is out of range (23634), clearing out load = 26, total = 96493568, avail = 71962624 main audio output warning: PTS is out of range (-13566), dropping buffer load = 26, total = 96493568, avail = 71962624 main audio output warning: PTS is out of range (-36566), dropping buffer load = 26, total = 96493568, avail = 71962624 main audio output debug: audio output is too slow (40434), trashing 21333us load = 26, total = 96493568, avail = 71757824 main video output warning: late picture skipped (104845) load = 26, total = 96493568, avail = 71618560 main video output warning: late picture skipped (73845) load = 26, total = 96493568, avail = 71618560 main video output warning: late picture skipped (42189) The "load = 26, total = 96493568, avail = 71618560" is the memory load in percent, total memory, memory available. You can see how the avail keeps going down. It goes down as much as 600K in 1-2 seconds. Maybe video is doing the same thing. -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From schmidt.simon at gmail.com Thu Jan 6 00:04:58 2005 From: schmidt.simon at gmail.com (simon schmidt) Date: Thu, 06 Jan 2005 00:04:58 +0100 Subject: [vlc] Re: Audio eats memory when PTS is not stable In-Reply-To: <20050105145123.47703B542@krishna.via.ecp.fr> References: <20050105145123.47703B542@krishna.via.ecp.fr> Message-ID: <41DC729A.6030604@gmail.com> Rick Davis wrote: >All, > When there are audio problems on a feed, the audio logic eats memory >real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am watching >a live feed and there appears to be PTS problems. The audio logic eats about >600KB of memory every second. Needless to say, on Windows CE it doesn't run >for long. > > hmmm I don't see why the swedish gouvernment should couse problems with VLC. PTS("Post och TeleStyrelsen") shouldn't mind what you are doing (unless you are sending pirat radio in sweden). aah now i get it.... the stream is sent on the FM-band in sweden and now you have to move your sender... I have a tip for you: find a good roof that you have access to and chain it to the building. (that should give you a few more minutes of sending time.) btw. what sender are you using? how many watts? do you have an SWR? why dont you send internet radio? or get a licence to send FM radio! you can check www.antus.se for some info about piratradio (in swedish) www.pts.se - post och telestyrelsen nevermind im just bored.... -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From stefano at salvi.mn.it Thu Jan 6 09:37:43 2005 From: stefano at salvi.mn.it (Stefano Salvi) Date: Thu, 06 Jan 2005 09:37:43 +0100 Subject: [vlc] Re: Problems with GPE interface (segfaults) In-Reply-To: <41DC48F7.3060307@planet.nl> References: <41DAC45C.3050801@salvi.mn.it> <41DC48F7.3060307@planet.nl> Message-ID: <41DCF8D7.1060709@salvi.mn.it> Jean-Paul Saman ha scritto: > Hi stefano, > > A few questions about how you trigger this problem: > > Try starting VLC from the GUI? > Or is this behaviour only when starting from a shell? > If it is a shell, then are you trying to run it over an ssh connection > with your workstation? If I try to start vlc from common user: - Trying to start from the interface shows nothing (segfaults before showing anything). - Starting from rxvt from the iPAQ segfaults with the message reportes in previous post - Statying from a SSH terminal segfaults the same way. If I try the same actions from root, all goes well, except for the GRK-CRITICAL. Also, if I play mp3s or videos from the RC command line interface all works well, also from normal user. I have to note that, as suggested in the familiar mailing list, as the version of libexpat doesn't match, I made a link from libexpat.so.0 to libexpat.so.1 (familiar GPE v0.8.0 has that version of libexpat). Thank you Steefano -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Thu Jan 6 19:06:05 2005 From: gbazin at altern.org (Gildas Bazin) Date: Thu, 6 Jan 2005 19:06:05 +0100 Subject: [vlc] Re: Audio eats memory when PTS is not stable In-Reply-To: <20050105145123.47703B542@krishna.via.ecp.fr> References: <20050105145123.47703B542@krishna.via.ecp.fr> Message-ID: <200501061906.05908.gbazin@altern.org> On Wednesday 05 January 2005 15:52, Rick Davis wrote: > All, > When there are audio problems on a feed, the audio logic eats memory > real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am watching > a live feed and there appears to be PTS problems. The audio logic eats about > 600KB of memory every second. Needless to say, on Windows CE it doesn't run > for long. > Could you try to make sure the problem comes from the audio output ? Try to run VLC with --noaudio to check that the leak disappear. As for the PTS messages, you might be able to improve that by increasing the caching with --udp-caching 600. -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Thu Jan 6 19:07:12 2005 From: gbazin at altern.org (Gildas Bazin) Date: Thu, 6 Jan 2005 19:07:12 +0100 Subject: [vlc] Re: Secondary audio In-Reply-To: <20050105181858.53161B531@krishna.via.ecp.fr> References: <20050105181858.53161B531@krishna.via.ecp.fr> Message-ID: <200501061907.12243.gbazin@altern.org> On Wednesday 05 January 2005 19:20, Rick Davis wrote: > Does VLC support secondary audio? We have a feed that has two audio streams > in it and from what we can tell, the second channel just eats memory. We are > running on Windows CE 5.0 using vlc 0.7.1 > VLC does support streams with several audio tracks but only 1 track can be selected at a time (the others are not decoded). -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From john at gocoretec.com Thu Jan 6 18:10:14 2005 From: john at gocoretec.com (John Anderson) Date: Thu, 6 Jan 2005 12:10:14 -0500 Subject: [vlc] Re: Audio eats memory when PTS is not stable References: <20050105145123.47703B542@krishna.via.ecp.fr> <200501061906.05908.gbazin@altern.org> Message-ID: <095001c4f412$97e962e0$1dc8c8c8@CheesyPoof> ----- Original Message ----- From: "Gildas Bazin" To: Sent: Thursday, January 06, 2005 1:06 PM Subject: [vlc] Re: Audio eats memory when PTS is not stable > On Wednesday 05 January 2005 15:52, Rick Davis wrote: > > All, > > When there are audio problems on a feed, the audio logic eats memory > > real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am > watching > > a live feed and there appears to be PTS problems. The audio logic eats > about > > 600KB of memory every second. Needless to say, on Windows CE it doesn't > run > > for long. > > > > Could you try to make sure the problem comes from the audio output ? > Try to run VLC with --noaudio to check that the leak disappear. > > As for the PTS messages, you might be able to improve that by increasing the > caching with --udp-caching 600. He's probably on to something. I had the same memory leak when playing a networked streamed MPEG-2 PS video on my RH9 Linux box that had no sound card. If I turned off audio on the streaming source the memory leak disappeared. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Thu Jan 6 18:29:40 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Thu, 6 Jan 2005 12:29:40 -0500 Subject: [vlc] Re: Audio eats memory when PTS is not stable In-Reply-To: <095001c4f412$97e962e0$1dc8c8c8@CheesyPoof> Message-ID: <20050106172804.A6977B49C@krishna.via.ecp.fr> As stated in a previous post. I have fixed the BIG leak, now there is just a small leak. I modified filters.c FiltersHintBuffers and changed p_first_alloc->i_alloc_type = AOUT_ALLOC_STACK; to p_first_alloc->i_alloc_type = AOUT_ALLOC_HEAP; That fixed the BIG leak. Now I get a small leak that seems to vary but is always in 4096bytes chunks. I am pretty sure it has to do with audio because I am listening to a Radio channel that has no Video and memory slower decreases. -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of John Anderson Sent: Thursday, January 06, 2005 12:10 PM To: vlc at videolan.org Subject: [vlc] Re: Audio eats memory when PTS is not stable ----- Original Message ----- From: "Gildas Bazin" To: Sent: Thursday, January 06, 2005 1:06 PM Subject: [vlc] Re: Audio eats memory when PTS is not stable > On Wednesday 05 January 2005 15:52, Rick Davis wrote: > > All, > > When there are audio problems on a feed, the audio logic eats memory > > real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am > watching > > a live feed and there appears to be PTS problems. The audio logic eats > about > > 600KB of memory every second. Needless to say, on Windows CE it doesn't > run > > for long. > > > > Could you try to make sure the problem comes from the audio output ? > Try to run VLC with --noaudio to check that the leak disappear. > > As for the PTS messages, you might be able to improve that by increasing the > caching with --udp-caching 600. He's probably on to something. I had the same memory leak when playing a networked streamed MPEG-2 PS video on my RH9 Linux box that had no sound card. If I turned off audio on the streaming source the memory leak disappeared. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Thu Jan 6 19:18:49 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Thu, 6 Jan 2005 10:18:49 -0800 Subject: [vlc] DIVx better than 3? Message-ID: <01a801c4f41c$2bda6090$2a32170a@LA.FRD.DIRECTV.COM> Hi, Is the DIV3 codec in VLC supposed to be the same as DIVx codec? I see that DIVx is up to version 5, is that something altogether different? Does VLC support (or plan to support) a video codec better than DIV3 that is supported by windows media player? Thanks Ricardo -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Thu Jan 6 19:44:51 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 6 Jan 2005 19:44:51 +0100 Subject: [vlc] Re: DIVx better than 3? In-Reply-To: <01a801c4f41c$2bda6090$2a32170a@LA.FRD.DIRECTV.COM> References: <01a801c4f41c$2bda6090$2a32170a@LA.FRD.DIRECTV.COM> Message-ID: <20050106184451.GA5489@kikal.org> On Thu, Jan 06, 2005, Ricardo Kleemann wrote : > Hi, > > Is the DIV3 codec in VLC supposed to be the same as DIVx codec? I see that > DIVx is up to version 5, is that something altogether different? > > Does VLC support (or plan to support) a video codec better than DIV3 that is > supported by windows media player? > VLC uses ffmpeg's implementation of DIV3. I've got no idea if it is considered as better as Microsoft's one (DIV3 was a hack of one of Microsoft's early (incompliant) MPEG4 encoders, if I remember correctly. DivX 4 and DivX 5 are implementations of ISO MPEG4. VLC can use either ffmpeg's own MPEG 4 implementation, or XviD's one. Both are considered as slithely better as DIV3, I think. VLC can encode and read video using several other codecs (MPEG1, MPEG2, h263, h264, WMV 1 and 2, WMV 3 on windows, MJPEG, Theora, etc...) -- Benjamin Pracht -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Thu Jan 6 19:50:55 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Thu, 6 Jan 2005 10:50:55 -0800 Subject: [vlc] Re: DIVx better than 3? References: <01a801c4f41c$2bda6090$2a32170a@LA.FRD.DIRECTV.COM> <20050106184451.GA5489@kikal.org> Message-ID: <01b001c4f420$a788aea0$2a32170a@LA.FRD.DIRECTV.COM> Thanks. But as for purposes of viewing video encoded with codecs supported by WMP, which is the best one that VLC provides? I tried, for example, encoding with mp4v and h264 but WMP doesn't support that. IOW if the requirement is to encode for viewing with WMP, what's the best codec (with highest compression) I should use? Ricardo ----- Original Message ----- From: "Benjamin PRACHT" To: Sent: Thursday, January 06, 2005 10:44 AM Subject: [vlc] Re: DIVx better than 3? > On Thu, Jan 06, 2005, Ricardo Kleemann wrote : > > Hi, > > > > Is the DIV3 codec in VLC supposed to be the same as DIVx codec? I see that > > DIVx is up to version 5, is that something altogether different? > > > > Does VLC support (or plan to support) a video codec better than DIV3 that is > > supported by windows media player? > > > > VLC uses ffmpeg's implementation of DIV3. I've got no idea if it is > considered as better as Microsoft's one (DIV3 was a hack of one of Microsoft's > early (incompliant) MPEG4 encoders, if I remember correctly. DivX 4 and > DivX 5 are implementations of ISO MPEG4. VLC can use either ffmpeg's own > MPEG 4 implementation, or XviD's one. Both are considered as slithely > better as DIV3, I think. VLC can encode and read video using several > other codecs (MPEG1, MPEG2, h263, h264, WMV 1 and 2, WMV 3 on windows, > MJPEG, Theora, etc...) > > -- > Benjamin Pracht > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From admin at triparish.net Thu Jan 6 23:01:47 2005 From: admin at triparish.net (Lewey Taylor) Date: Thu, 06 Jan 2005 16:01:47 -0600 Subject: [vlc] need help with a project Message-ID: <1105048907.8226.16.camel@localhost> We are a fixed broadband provider and have been contracted by our local paper to provide a web cam stream of the mardi gras parades. We need to send a stream from the parade route via our wireless connection back to our noc. We then need to make this stream available for the public via web browsers. We have built a test box and got a stream playing in the noc with vlc no problem. We are kinda stuck on how to rebroadcast the stream via a web page. We want something that will require minimal user interaction. Like an universal pugin or java based. The main reason is that the local paper is selling ads around the stream so we need to play it in the web page. Thanks, Lewey -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From listoid1 at linkalarm.com Fri Jan 7 01:10:33 2005 From: listoid1 at linkalarm.com (George Bray) Date: Fri, 7 Jan 2005 11:10:33 +1100 Subject: [vlc] VLC Plugin Javascript variables Message-ID: <8C488BFB-6040-11D9-BA0A-000A95ACA8A6@linkalarm.com> Gday, VLC 0.8.1 on XP in Firefox 1.0 with the plugin works great showing multiple UDP streams in the browser. (Thanks for the great doco). I'd like to build a page for monitoring UDP streams and want to delve further into the variables that may be available with get_[str|int|bool]_variable(var_name). Is there a list of variables anywhere? I found this but am not sure if it's current or relevant to the JS interface: http://developers.videolan.org/vlc/vlc/doc/doxygen/html/globals.html Also, am I calling it correctly? Quiz My aim is to determine when the input stream goes away. This can't be determined visually, as the last frame of the stream is left showing when the source has stopped. Internally, what's the best var to use, or can I set a setting to NOT show the last received frame? If all this is too much for the unsupported, development status of the plugin that's OK. Just trying to push the barrier. thanks 1e6, George -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Fri Jan 7 11:57:25 2005 From: gbazin at altern.org (Gildas Bazin) Date: Fri, 7 Jan 2005 11:57:25 +0100 Subject: [vlc] Re: Audio eats memory when PTS is not stable In-Reply-To: <20050106172804.A6977B49C@krishna.via.ecp.fr> References: <20050106172804.A6977B49C@krishna.via.ecp.fr> Message-ID: <200501071157.26070.gbazin@altern.org> On Thursday 06 January 2005 18:29, Rick Davis wrote: > As stated in a previous post. I have fixed the BIG leak, now there is just a > small leak. I modified filters.c FiltersHintBuffers and changed > > p_first_alloc->i_alloc_type = AOUT_ALLOC_STACK; > to > p_first_alloc->i_alloc_type = AOUT_ALLOC_HEAP; > > That fixed the BIG leak. > Thanks for investigating this. This should be fixed properly in the development version now. > Now I get a small leak that seems to vary but is always in 4096bytes > chunks. I am pretty sure it has to do with audio because I am listening to a > Radio channel that has no Video and memory slower decreases. > Not really sure about this one. I'll try to do some tests on my side. -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Fri Jan 7 11:36:04 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Fri, 7 Jan 2005 11:36:04 +0100 Subject: [vlc] Re: need help with a project In-Reply-To: <1105048907.8226.16.camel@localhost> References: <1105048907.8226.16.camel@localhost> Message-ID: <20050107103604.GA4129@kikal.org> On Thu, Jan 06, 2005, Lewey Taylor wrote : > We are a fixed broadband provider and have been contracted by our local > paper to provide a web cam stream of the mardi gras parades. We need to > send a stream from the parade route via our wireless connection back to > our noc. We then need to make this stream available for the public via > web browsers. > > We have built a test box and got a stream playing in the noc with vlc no > problem. We are kinda stuck on how to rebroadcast the stream via a web > page. We want something that will require minimal user interaction. > Like an universal pugin or java based. The main reason is that the > local paper is selling ads around the stream so we need to play it in > the web page. > Well, as I guess that asking your users to install VLC's mozilla plugin isn't an option, I see 2 options: - Stream using MMSH as an access and ASFH as a mux, and use Windows Media Player's IE Plugin to display the video - Stream using RTP/RTSP (with VLC or Darwin Streaming Server) and use Quicktime's Plugin. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Thu Jan 6 12:47:13 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Thu, 6 Jan 2005 06:47:13 -0500 Subject: [vlc] PTS problem and memory leak Message-ID: <20050106114529.3F94EB628@krishna.via.ecp.fr> All, I have been tracking down my memory leak and I found that in aout_FiltersPlay in src/audio_output/filters.c it was calling aout_BufferAlloc. For some reason, the i_alloc_type was not set to AOUT_ALLOC_HEAP so the memory allocated was not being freed when aout_BufferFree was called. I added a line of code in filters.c to force i_alloc_type to AOUT_ALLOC_HEAP and my big leak went away. I still have a small leak where memory utilization goes up in 4K chunks, which is probably the heap chunk size, every so many minutes. There is also still a leak when I stop VLC. The amount of memory available doesn't match the amount of memory available before playing. -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From robert.angermayr at gmx.de Thu Jan 6 12:48:04 2005 From: robert.angermayr at gmx.de (Robert Angermayr) Date: Thu, 6 Jan 2005 12:48:04 +0100 Subject: [vlc] VLC and OpenOffice Message-ID: <004201c4f3e5$9c735140$6c01a8c0@ramobil> Hello VLC-Team, i have a Question (or suggestion). To use Videos or Audio in OpenOffice (Impress) you must use Netscape plugins, so far so good, the problem is that in Windows (XP) none of the plugins (AVI RealPlayer or QuickTime) works usable. I heard from VLC i tried it but... in Mozilla it works perfect (so far i can see) but in OpenOffice the Plugin is not recognized. Do you have any ideeas how i can use the plugin in OpenOffice. This would be great because the player is working perfectly with all of my videos. Now one suggestions for the Plugin: it would be veary helpful when the size of the video and other options can be customized. One klick in the videp starts the film the next stops it. Sorry for my bad englisch. Best regards Robert -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmcirni at rockwellcollins.com Fri Jan 7 01:19:47 2005 From: fmcirni at rockwellcollins.com (fmcirni at rockwellcollins.com) Date: Thu, 6 Jan 2005 16:19:47 -0800 Subject: [vlc] VLC Elapsed Time\Total Time missing for Transport Streams Message-ID: I've noticed that VLC will display the elapsed time\total time of an MPEG-1 System Stream file being played. The display however does not work when playing MPEG-2 Transport Stream files. Is there a bug fix for this? Will it be implemented in the future? Thanks, Ford M. Cirni, Manager Of Technical Operations enCompass Inflight Entertainment Services 2001 W. Mission Blvd., Pomona Calif. 91766-1020 Ph.909.868.4668 Fax.909.868.5814 E-mail: fmcirni at rockwellcollins.com -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Cedric.Marodon at alumni.enseeiht.fr Fri Jan 7 06:51:02 2005 From: Cedric.Marodon at alumni.enseeiht.fr (Cedric.Marodon at alumni.enseeiht.fr) Date: Fri, 7 Jan 2005 06:51:02 +0100 (CET) Subject: [vlc] Re: Audio eats memory when PTS is not stable In-Reply-To: <20050106172804.A6977B49C@krishna.via.ecp.fr> References: <095001c4f412$97e962e0$1dc8c8c8@CheesyPoof> <20050106172804.A6977B49C@krishna.via.ecp.fr> Message-ID: <1170.193.253.187.141.1105077062.squirrel@193.253.187.141> Maybe you can try to fix the memory leak with this part of code in waveout.c Open function() : /* Calculate the frame size in bytes */ p_aout->output.i_nb_samples = FRAME_SIZE; #ifdef WINCE /* Check the buffer size -- minimum of 1/4 second (word aligned) */ if ( p_aout->output.i_nb_samples < (p_aout-output.output.i_rate/4) ) p_aout->output.i_nb_samples = ((p_aout->output.output.i_rate/4)+10)&~3; //p_aout->output.i_nb_samples = ((p_aout->output.output.i_rate/4)+3)&~3; #endif aout_FormatPrepare( &p_aout->output.output ); #ifdef WINCE p_aout->output.output.i_frame_length = p_aout->output.i_nb_samples; p_aout->output.p_sys->i_buffer_size = p_aout->output.i_nb_samples * p_aout->output.output.i_bytes_per_frame; #else p_aout->output.p_sys->i_buffer_size = FRAME_SIZE * p_aout->output.output.i_bytes_per_frame; #endif In the Windows CE API, the waveout buffer length must contain at least a number of samples equal to a quarter second. If VLC asks for a smaller buffer, the minimal length is allocated and each buffer will not be free correctly. Another memory leak found : do not forget to see if p_in is freed in ugly or linear audio resampler ! Hope this help ^_^ MixerAnderson > As stated in a previous post. I have fixed the BIG leak, now there is just > a > small leak. I modified filters.c FiltersHintBuffers and changed > > p_first_alloc->i_alloc_type = AOUT_ALLOC_STACK; > to > p_first_alloc->i_alloc_type = AOUT_ALLOC_HEAP; > > That fixed the BIG leak. > > Now I get a small leak that seems to vary but is always in 4096bytes > chunks. I am pretty sure it has to do with audio because I am listening to > a > Radio channel that has no Video and memory slower decreases. > > -- > Rick > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > > -----Original Message----- > From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf > Of > John Anderson > Sent: Thursday, January 06, 2005 12:10 PM > To: vlc at videolan.org > Subject: [vlc] Re: Audio eats memory when PTS is not stable > > > ----- Original Message ----- > From: "Gildas Bazin" > To: > Sent: Thursday, January 06, 2005 1:06 PM > Subject: [vlc] Re: Audio eats memory when PTS is not stable > > >> On Wednesday 05 January 2005 15:52, Rick Davis wrote: >> > All, >> > When there are audio problems on a feed, the audio logic eats memory >> > real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am >> watching >> > a live feed and there appears to be PTS problems. The audio logic eats >> about >> > 600KB of memory every second. Needless to say, on Windows CE it >> doesn't >> run >> > for long. >> > >> >> Could you try to make sure the problem comes from the audio output ? >> Try to run VLC with --noaudio to check that the leak disappear. >> >> As for the PTS messages, you might be able to improve that by increasing > the >> caching with --udp-caching 600. > > He's probably on to something. I had the same memory leak when playing a > networked streamed MPEG-2 PS video on my RH9 Linux box that had no sound > card. If I turned off audio on the streaming source the memory leak > disappeared. > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From alexmui at hkbn.com.hk Fri Jan 7 12:43:58 2005 From: alexmui at hkbn.com.hk (Alex Mui) Date: Fri, 7 Jan 2005 19:43:58 +0800 Subject: [vlc] Question about streaming Live Audio Message-ID: <00bd01c4f4ae$2d55efb0$bf33a8c0@alexmui> Dear Sir, I now use VLC (windows version) to streaming out a live audio from sound card, by the way we use Amino STB can use igmp://multicast_ip_address:channel_port_number can hear the live audio, but the other STB need a audio ID to decoder the stream, does VLC stream out live audio can have a Audio ID? and any default audio ID? Please reply me ASAP Thank Alex -------------- next part -------------- An HTML attachment was scrubbed... URL: From cedric_marodon at yahoo.fr Fri Jan 7 13:02:10 2005 From: cedric_marodon at yahoo.fr (cedric marodon) Date: Fri, 7 Jan 2005 13:02:10 +0100 (CET) Subject: [vlc] Re: Audio eats memory when PTS is not stable Message-ID: <20050107120210.34644.qmail@web42004.mail.yahoo.com> Maybe you can try to fix the memory leak with this part of code in waveout.c Open function() : /* Calculate the frame size in bytes */ p_aout->output.i_nb_samples = FRAME_SIZE; #ifdef WINCE /* Check the buffer size -- minimum of 1/4 second (word aligned) */ if ( p_aout->output.i_nb_samples < (p_aout-output.output.i_rate/4) ) p_aout->output.i_nb_samples = ((p_aout->output.output.i_rate/4)+10)&~3; //p_aout->output.i_nb_samples = ((p_aout->output.output.i_rate/4)+3)&~3; #endif aout_FormatPrepare( &p_aout->output.output ); #ifdef WINCE p_aout->output.output.i_frame_length = p_aout->output.i_nb_samples; p_aout->output.p_sys->i_buffer_size = p_aout->output.i_nb_samples * p_aout->output.output.i_bytes_per_frame; #else p_aout->output.p_sys->i_buffer_size = FRAME_SIZE * p_aout->output.output.i_bytes_per_frame; #endif In the Windows CE API, the waveout buffer length must contain at least a number of samples equal to a quarter second. If VLC asks for a smaller buffer, the minimal length is allocated and each buffer will not be free correctly. Another memory leak found : do not forget to see if p_in is freed in ugly or linear audio resampler ! Hope this help ^_^ MixerAnderson > As stated in a previous post. I have fixed the BIG leak, now there is just > a > small leak. I modified filters.c FiltersHintBuffers and changed > > p_first_alloc->i_alloc_type = AOUT_ALLOC_STACK; > to > p_first_alloc->i_alloc_type = AOUT_ALLOC_HEAP; > > That fixed the BIG leak. > > Now I get a small leak that seems to vary but is always in 4096bytes > chunks. I am pretty sure it has to do with audio because I am listening to > a > Radio channel that has no Video and memory slower decreases. > > -- > Rick > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > > -----Original Message----- > From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf > Of > John Anderson > Sent: Thursday, January 06, 2005 12:10 PM > To: vlc at videolan.org > Subject: [vlc] Re: Audio eats memory when PTS is not stable > > > ----- Original Message ----- > From: "Gildas Bazin" > To: > Sent: Thursday, January 06, 2005 1:06 PM > Subject: [vlc] Re: Audio eats memory when PTS is not stable > > >> On Wednesday 05 January 2005 15:52, Rick Davis wrote: >> > All, >> > When there are audio problems on a feed, the audio logic eats memory >> > real fast. I am trying to run version 0.8.0 on Windows CE 5.0. I am >> watching >> > a live feed and there appears to be PTS problems. The audio logic eats >> about >> > 600KB of memory every second. Needless to say, on Windows CE it >> doesn't >> run >> > for long. >> > >> >> Could you try to make sure the problem comes from the audio output ? >> Try to run VLC with --noaudio to check that the leak disappear. >> >> As for the PTS messages, you might be able to improve that by increasing > the >> caching with --udp-caching 600. > > He's probably on to something. I had the same memory leak when playing a > networked streamed MPEG-2 PS video on my RH9 Linux box that had no sound > card. If I turned off audio on the streaming source the memory leak > disappeared. > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > --------------------------------- D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From peter at optimalstream.net Fri Jan 7 13:43:44 2005 From: peter at optimalstream.net (Peter Maersk-Moller) Date: Fri, 07 Jan 2005 13:43:44 +0100 Subject: [vlc] Mozilla plugin for Mac ? Message-ID: <41DE8400.5020101@optimalstream.net> Hi. I had the impression that VLC had a Mozilla plugin for Mac X, but that it was missing some functionality compared to the plugin for Win/Linux. According to http://developers.videolan.org/vlc/todo.html#t22 Finish Mac Mozilla plugin Difficulty: Medium Urgency: Normal Platform:Mac OS X The Mac mozilla plugin needs some more work to be useable. Basic funtionality is working. However the video-output part needs some more work since it was crashing. See svn history for the old code. Does anyone know how to install it ? On Win/Linux you have to copy the dll/so and the xpt file to Mozilla/plugins/ and Mozilla/components, but I'm not really sure what to do on Mac and (not being a Mac expert) I don't seem to be able to find these files in the VLC Mac OSX binary distribution. Anybody who know how and what to do ? Kind regards --PMM -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Sylvain.LAREBIERE at radiofrance.com Fri Jan 7 13:58:11 2005 From: Sylvain.LAREBIERE at radiofrance.com (LAREBIERE Sylvain) Date: Fri, 7 Jan 2005 13:58:11 +0100 Subject: [vlc] Option "enregistrement" Message-ID: <7B23B8187292D61192F1000476AA9E29063F1F72@rf75csnt5.inetrf> Bonjour, je d?couvre votre produit qui est tr?s convaincant par contre existe-il une possibilit? de pouvoir programmer l'enregistrement d'une cha?ne ou d'un flux IP? Cette option fera-t-elle parti d'un d?veloppement ult?rieur? Elle serait fort int?ressante. Cordialement. Sylvain LAREBIERE STR PARIS Pi?ce 1411 116 avenue du pr?sident KENNEDY 75220 PARIS CEDEX 16 T?l.: 0156405872 Fax: 0156402520 -------------- next part -------------- An HTML attachment was scrubbed... URL: From Johan.Vandecasteele at minoc.com Fri Jan 7 15:38:41 2005 From: Johan.Vandecasteele at minoc.com (Johan Vandecasteele) Date: Fri, 7 Jan 2005 15:38:41 +0100 Subject: [vlc] Distribution request covermount cd-rom Message-ID: <1B9DF74B024BCE4A917E11BB2F6708730FB149@minoc01.Minoc.local> Hello, I'm Johan Vandecasteele, marketingmanager of Belgium's leading computer consumer magazines Clickx Magazine and PC Magazine. We are including a free covermount cd-rom with our Clickx Magazine (February 22 2005), and we would like to include freeware VideoLAN on that cd. Can you please tell us if we can include the software on our cd-rom. Please visit our website www.clickxmagazine.be for information on our magazine. The download link to our mediakit is http://sales.minoc.com/newsletter/images/MediakitFull_Minoc_2005_ENG.pdf it will give you some idea of our company and portfolio. Hope to hear from you soon, Kind regards, Johan Vandecasteele ________________________________ Johan Vandecasteele marketingmanager Minoc Business Press Clickx Magazine | PC Magazine | Smart Business Strategies | ZDNet.be | GameSpot.be www.clickxmagazine.be | www.pcmagazine.be | www.zdnet.be | www.gamespot.be Tel: 014/44.20.61 | Fax: 014/44.20.66 Minoc Business Press NV | Everdongenlaan 15 bus 1 | 2300 Turnhout -------------- next part -------------- An HTML attachment was scrubbed... URL: From bigben+spam at videolan.org Sat Jan 8 09:55:06 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sat, 8 Jan 2005 09:55:06 +0100 Subject: [vlc] Re: Distribution request covermount cd-rom In-Reply-To: <1B9DF74B024BCE4A917E11BB2F6708730FB149@minoc01.Minoc.local> References: <1B9DF74B024BCE4A917E11BB2F6708730FB149@minoc01.Minoc.local> Message-ID: <20050108085506.GA21156@kikal.org> On Fri, Jan 07, 2005, Johan Vandecasteele wrote : > Hello, > > I'm Johan Vandecasteele, marketingmanager of Belgium's leading computer > consumer magazines Clickx Magazine and PC Magazine. We are including a > free covermount cd-rom with our Clickx Magazine (February 22 2005), and > we would like to include freeware VideoLAN on that cd. > > Can you please tell us if we can include the software on our cd-rom. > Please visit our website www.clickxmagazine.be First of all, thanks for your interest in VideoLAN As Stated in our FAQ (http://www.videolan.org/doc/faq/en/index.html#id2468330), all ou softwares are released under the GPL. As stated there, the easiest way to comply with the GPL is to "accompany the product you want to distribute with its sources. For example, if you plan to distribute the lastest binary version of VLC, you should also include all the files listed on the VLC source code page." -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From hartman at videolan.org Sat Jan 8 13:56:37 2005 From: hartman at videolan.org (Derk-Jan Hartman) Date: Sat, 8 Jan 2005 13:56:37 +0100 Subject: [vlc] Re: need help with a project In-Reply-To: <20050107103604.GA4129@kikal.org> References: <1105048907.8226.16.camel@localhost> <20050107103604.GA4129@kikal.org> Message-ID: Another method that might be suited here is Multipart jpeg streaming, which vlc also supports.. DJ On 07 jan 2005, at 11:36, Benjamin PRACHT wrote: > On Thu, Jan 06, 2005, Lewey Taylor wrote : >> We are a fixed broadband provider and have been contracted by our >> local >> paper to provide a web cam stream of the mardi gras parades. We need >> to >> send a stream from the parade route via our wireless connection back >> to >> our noc. We then need to make this stream available for the public >> via >> web browsers. >> >> We have built a test box and got a stream playing in the noc with vlc >> no >> problem. We are kinda stuck on how to rebroadcast the stream via a >> web >> page. We want something that will require minimal user interaction. >> Like an universal pugin or java based. The main reason is that the >> local paper is selling ads around the stream so we need to play it in >> the web page. >> > > Well, as I guess that asking your users to install VLC's mozilla plugin > isn't an option, I see 2 options: > > - Stream using MMSH as an access and ASFH as a mux, and use Windows > Media Player's IE Plugin to display the video > > - Stream using RTP/RTSP (with VLC or Darwin Streaming Server) and use > Quicktime's Plugin. > > -- > BigBen > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > --- Universiteit Twente Derk-Jan Hartman (d.hartman at student.utwente dot nl) http://home.student.utwente.nl/d.hartman -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From alexmui at hkbn.com.hk Fri Jan 7 12:43:58 2005 From: alexmui at hkbn.com.hk (Alex Mui) Date: Fri, 7 Jan 2005 19:43:58 +0800 Subject: [vlc] [streaming] Question about streaming Live Audio Message-ID: <00bd01c4f4ae$2d55efb0$bf33a8c0@alexmui> Dear Sir, I now use VLC (windows version) to streaming out a live audio from sound card, by the way we use Amino STB can use igmp://multicast_ip_address:channel_port_number can hear the live audio, but the other STB need a audio ID to decoder the stream, does VLC stream out live audio can have a Audio ID? and any default audio ID? Please reply me ASAP Thank Alex -------------- next part -------------- An HTML attachment was scrubbed... URL: From jg at jguk.org Sat Jan 8 13:05:43 2005 From: jg at jguk.org (J. Grant) Date: Sat, 08 Jan 2005 12:05:43 +0000 Subject: [vlc] CVS: An Exception Has Occurred Message-ID: <41DFCC97.1060909@jguk.org> http://developers.videolan.org/cgi-bin/viewcvs.cgi/vlc/modules/demux/mp4/?cvsroot=VideoLAN Hi, This error is still here. 12 hours after I first noticed it. Ensure you include my email address in any replies. Kind regards JG An Exception Has Occurred VideoLAN not found! The wrong path for this repository was configured, or the server on which the CVS tree lives may be down. Please try again in a few minutes. Python Traceback Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/viewcvs/viewcvs.py", line 3235, in main request.run_viewcvs() File "/usr/lib/python2.3/site-packages/viewcvs/viewcvs.py", line 252, in run_viewcvs raise debug.ViewCVSException( ViewCVSException: ViewCVS Unrecoverable Error: VideoLAN not found! The wrong path for this repository was configured, or the server on which the CVS tree lives may be down. Please try again in a few minutes. -- Homepage: http://jguk.org/ Blog: http://jguk.org/blog.rss Radio: http://jguk.org/#radio -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mfmbusiness at earthlink.net Sat Jan 8 19:09:21 2005 From: mfmbusiness at earthlink.net (Mark Moriarty) Date: Sat, 8 Jan 2005 13:09:21 -0500 Subject: [vlc] Re: CVS: An Exception Has Occurred In-Reply-To: <41DFCC97.1060909@jguk.org> Message-ID: http://developers.videolan.org/cgi-bin/viewcvs.cgi/trunk/modules/demux/mp4/ How did you get a link to viewcvs.cgi/vlc? When I use viewcvs, "viewcvs.cgi/trunk" is the path with the files. -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of J. Grant Sent: Saturday, January 08, 2005 7:06 AM To: vlc at videolan.org Subject: [vlc] CVS: An Exception Has Occurred http://developers.videolan.org/cgi-bin/viewcvs.cgi/vlc/modules/demux/mp4/?cv sroot=VideoLAN Hi, This error is still here. 12 hours after I first noticed it. Ensure you include my email address in any replies. Kind regards JG An Exception Has Occurred VideoLAN not found! The wrong path for this repository was configured, or the server on which the CVS tree lives may be down. Please try again in a few minutes. Python Traceback Traceback (most recent call last): File "/usr/lib/python2.3/site-packages/viewcvs/viewcvs.py", line 3235, in main request.run_viewcvs() File "/usr/lib/python2.3/site-packages/viewcvs/viewcvs.py", line 252, in run_viewcvs raise debug.ViewCVSException( ViewCVSException: ViewCVS Unrecoverable Error: VideoLAN not found! The wrong path for this repository was configured, or the server on which the CVS tree lives may be down. Please try again in a few minutes. -- Homepage: http://jguk.org/ Blog: http://jguk.org/blog.rss Radio: http://jguk.org/#radio -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ricardo at americasnet.com Sun Jan 9 01:46:13 2005 From: ricardo at americasnet.com (Ricardo Kleemann) Date: Sat, 8 Jan 2005 16:46:13 -0800 Subject: [vlc] v4l (linux) help ? Message-ID: <003001c4f5e4$9eb3ab20$0101a8c0@laptop> Hi, Can anyone help me with VLC for linux? In the windows version of VLC, for capture device, there is an option to configure device properties. There I can select the video size, the fps, the color mode, etc... However, in VLC for linux, with the v4l driver, that option does not exist. Is it possible to do it via command line? How would I, for example, configure capture for 176x144, RGB32, 15fps for video capture? Thanks Ricardo -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Sun Jan 9 19:50:45 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sun, 9 Jan 2005 19:50:45 +0100 Subject: [vlc] Re: Mozilla plugin for Mac ? In-Reply-To: <41DE8400.5020101@optimalstream.net> References: <41DE8400.5020101@optimalstream.net> Message-ID: <20050109185045.GA24547@kikal.org> On Fri, Jan 07, 2005, Peter Maersk-Moller wrote : > Hi. > > I had the impression that VLC had a Mozilla plugin for Mac X, but > that it was missing some functionality compared to the plugin for > Win/Linux. > > According to http://developers.videolan.org/vlc/todo.html#t22 > > Finish Mac Mozilla plugin > > Difficulty: Medium Urgency: Normal Platform:Mac OS X > The Mac mozilla plugin needs some more work to be useable. Basic > funtionality > is working. However the video-output part needs some more work since it > was > crashing. See svn history for the old code. > > Does anyone know how to install it ? On Win/Linux you have to copy > the dll/so and the xpt file to Mozilla/plugins/ and Mozilla/components, > but I'm not really sure what to do on Mac and (not being a Mac expert) > I don't seem to be able to find these files in the VLC Mac OSX > binary distribution. Anybody who know how and what to do ? > Well, there is no binary package available since it never really reached a stable state... You can compile it by using the --enable-mozilla configure option. However, a bug not fixed since the latest changes on the video output system of the OSX port makes it quite useless (no video...) -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jsimms at utk.edu Tue Jan 11 00:21:49 2005 From: jsimms at utk.edu (Jason Simms) Date: Mon, 10 Jan 2005 18:21:49 -0500 Subject: [vlc] Problems Encoding mp2a Above 256k Message-ID: <41E30E0D.7050504@utk.edu> Hello, I am unable to stream MPEG-2 audio at anything greater than 256k. The only other option above 256k is 512k, but whenever I choose that and start the stream the software immediately exits (this is on Windows XP using 0.8.1, and the behavior resembles a segfault on Linux). What might be causing this? Beyond this, it is my understanding that MPEG-2 is a non-variable 2 megabit stream (roughly), so I don't even understand why I must choose a bitrate at which to encode the output. Certainly, 512k comes nowhere close to 2 megabit, so what am I missing (conceptually or otherwise!)? Thanks, Jason Simms -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Tue Jan 11 00:35:45 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Tue, 11 Jan 2005 00:35:45 +0100 Subject: [vlc] Re: Problems Encoding mp2a Above 256k In-Reply-To: <41E30E0D.7050504@utk.edu> References: <41E30E0D.7050504@utk.edu> Message-ID: <20050110233545.GA12670@kikal.org> On Mon, Jan 10, 2005, Jason Simms wrote : > Hello, > > I am unable to stream MPEG-2 audio at anything greater than 256k. The > only other option above 256k is 512k, but whenever I choose that and > start the stream the software immediately exits (this is on Windows XP > using 0.8.1, and the behavior resembles a segfault on Linux). What > might be causing this? > > Beyond this, it is my understanding that MPEG-2 is a non-variable 2 > megabit stream (roughly), so I don't even understand why I must choose a > bitrate at which to encode the output. Certainly, 512k comes nowhere > close to 2 megabit, so what am I missing (conceptually or otherwise!)? > Well, the fact VLC segfault clearly seems to be a bug. However, 512 kbit/s is huge for MPEG audio. Standard values (used in DVB are 160-224 kbit/s). Remember that uncompressed 44100 stereo PCM is 1.4 Mbit/s... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Mon Jan 10 16:23:22 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Mon, 10 Jan 2005 10:23:22 -0500 Subject: [vlc] Memory leak Message-ID: <20050110152102.54D0CB5CB@krishna.via.ecp.fr> All, I am trying to find the memory leak and noticed that memory is allocated to the p_libvlc object during startup but never freed. The p_libvlc object is never destroyed. If I add code to destroy p_libvlc in VLC_Destroy, it crashes if I was watching a video. If I enter an IP address that isn't valid, i.e. I am watching but no feed, destroying p_libvlc seems to work. I am using vlc_0.7.1, but it looks like vlc_0.8.0 doesn't destroy p_libvlc either. Should p_libvlc be destroyed or is there another way to clean it up? -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From steve at rms.bellsouth.net Mon Jan 10 21:17:52 2005 From: steve at rms.bellsouth.net (Steve Ger) Date: Mon, 10 Jan 2005 15:17:52 -0500 Subject: [vlc] Hauppauge WinTV-PVR-500MCE Message-ID: Will VLC support Hauppauge's 500 MCE card? I'm trying to find a way to stream data from two different cable boxes and it would be great to do it from one card. Thanks, --Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: From rozman at fri.uni-lj.si Tue Jan 11 09:56:28 2005 From: rozman at fri.uni-lj.si (Robert Rozman) Date: Tue, 11 Jan 2005 09:56:28 +0100 Subject: [vlc] Simple VOD and transcoding solution - is VLC right app ? Message-ID: <00b701c4f7bb$73da06f0$65f7a8c0@Lapitopi> Hi, I have TV recordings on home web server in mpeg2. I'd like to access them also from work, but since I'm on ADSL, download speed is too slow. So would like to transcode recordings on the fly. I'd like to have simple VOD system accessible from web page. I also use Misterhouse (Perl based home automation system) so any example in Perl would be more then welcome. Is VLC right fot the job (click on link to file on web page and play streamed-transcoded video file) or should I take some other solution (it should be open sourced) ? Thanks in advance, regards, Rob. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Tue Jan 11 10:49:22 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Tue, 11 Jan 2005 10:49:22 +0100 Subject: [vlc] Re: Hauppauge WinTV-PVR-500MCE In-Reply-To: References: Message-ID: <20050111094922.GB12670@kikal.org> On Mon, Jan 10, 2005, Steve Ger wrote : > Will VLC support Hauppauge's 500 MCE card? I'm trying to find a way to > stream data from two different cable boxes and it would be great to do > it from one card. > VLC can grab video from direct show devoces on Windows, v4l and ivtv devices on linux. A (very) fast search didn't give me any hint on whether this card has such drivers or not. If anybody has more info... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Philippe.deneve at intec.ugent.be Wed Jan 12 12:04:02 2005 From: Philippe.deneve at intec.ugent.be (Philippe De Neve) Date: Wed, 12 Jan 2005 12:04:02 +0100 Subject: [vlc] AVI muxer gone? Message-ID: <0aa701c4f896$6d363b30$bb7ac19d@King> Hi Folks, where is the AVI format encapsulation option? How can I save an encoded MPEG-4 AVC file to AVI? greetz, Philippe. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From sigmunau at stud.ntnu.no Wed Jan 12 12:10:46 2005 From: sigmunau at stud.ntnu.no (Sigmund Augdal) Date: Wed, 12 Jan 2005 12:10:46 +0100 Subject: [vlc] Re: AVI muxer gone? In-Reply-To: <0aa701c4f896$6d363b30$bb7ac19d@King> References: <0aa701c4f896$6d363b30$bb7ac19d@King> Message-ID: <20050112111046.GA13613@hobbes> On Wed, Jan 12, 2005 at 12:04:02PM +0100, Philippe De Neve wrote: > Hi Folks, > > where is the AVI format encapsulation option? > How can I save an encoded MPEG-4 AVC file to AVI? The avi muxer never worked well, and over time it grew more and more broken, and noone showed any interrest i repairing it. We figured it would be really bad if people continued to generate broken files with vlc, so we removed the muxer. So the simple answer to your question is that you don't. At least not with vlc. Try mp4 in stead. Sigmund > > > greetz, Philippe. > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Wed Jan 12 12:32:01 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 12 Jan 2005 12:32:01 +0100 Subject: [vlc] Re: AVI muxer gone? In-Reply-To: <0aa701c4f896$6d363b30$bb7ac19d@King> References: <0aa701c4f896$6d363b30$bb7ac19d@King> Message-ID: <20050112113201.GB16098@kikal.org> On Wed, Jan 12, 2005, Philippe De Neve wrote : > > where is the AVI format encapsulation option? > How can I save an encoded MPEG-4 AVC file to AVI? > I think TS is a valid muxer for AVC... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From frederic at none.com Wed Jan 12 13:14:11 2005 From: frederic at none.com (=?ISO-8859-1?Q?Fr=E9d=E9ric_Miserey?=) Date: Wed, 12 Jan 2005 13:14:11 +0100 Subject: [vlc] multi-lingual DVDs Message-ID: <77BBAB50-6493-11D9-8C98-000A9590AF4A@none.com> Hi, I have a number of DVDs who have different chapters for different languages (WD's Peter Pan is one) : 1 is common 2 for english / 3 for spanish / 4 for french 5 -> 9 are common etc. When I play those with VLC, the ? localized ? chapters are played x times : in the example above, chapter 2 is played 3 times (with the audio settings chosen previously, so you can view 3 times the english chapter with french audio) I guess it is a bug ;-) Thank you so much anyway, Fr?d?ric -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From admin at triparish.net Wed Jan 12 17:11:04 2005 From: admin at triparish.net (Lewey Taylor) Date: Wed, 12 Jan 2005 10:11:04 -0600 Subject: [vlc] Re: need help with a project In-Reply-To: <20050107103604.GA4129@kikal.org> References: <1105048907.8226.16.camel@localhost> <20050107103604.GA4129@kikal.org> Message-ID: <1105546264.9002.13.camel@localhost> > Well, as I guess that asking your users to install VLC's mozilla plugin > isn't an option, I see 2 options: > > - Stream using MMSH as an access and ASFH as a mux, and use Windows > Media Player's IE Plugin to display the video Sorry for the delayed reply. Thanks so much for your help. We decided to go with MMSH. We are transcoding in mpeg4 back to our noc and then rebroadcasting with mms embedded in a webpage. Works great!!!! I have some other questions. I have seen reference to vlc running as a daemon but can't find switches in longhelp or google. Can this be done so we can use daemontools to supervise? Also I see you can add logo and text but can't seem to get it working. Not sure where to put it in the command. Can someone offer an example of this? Thanks again, Lewey -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From xtophe at nxtelevision.com Wed Jan 12 17:26:47 2005 From: xtophe at nxtelevision.com (Christophe Mutricy) Date: Wed, 12 Jan 2005 17:26:47 +0100 Subject: [vlc] Re: need help with a project In-Reply-To: <1105546264.9002.13.camel@localhost> References: <1105048907.8226.16.camel@localhost> <20050107103604.GA4129@kikal.org> <1105546264.9002.13.camel@localhost> Message-ID: <20050112162647.GA9016@nxtelevision.com> > I have some other questions. I have seen reference to vlc running as a > daemon but can't find switches in longhelp or google. Can this be done > so we can use daemontools to supervise? > Under Win ? I believe there are a ntservice interface. ( vlc -I ntservice ) > Also I see you can add logo and text but can't seem to get it working. > Not sure where to put it in the command. Can someone offer an example > of this? You have to add sfilter to your transcode chain. Some thing like vlc -vvv --color -I http --sout '#transcode{vcodec=mp4v,vb=900,acodec=mpga,ab=64,sfilter=logo}:standard{ access=udp,mux=ts,url=239.x.x.x}' --logo-file="/home/nx/logo.png" --logo-x=10 --logo-y=10 --ttl 12 > -- Xtophe -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From admin at triparish.net Wed Jan 12 17:29:30 2005 From: admin at triparish.net (Lewey Taylor) Date: Wed, 12 Jan 2005 10:29:30 -0600 Subject: [vlc] Re: need help with a project In-Reply-To: <20050112162647.GA9016@nxtelevision.com> References: <1105048907.8226.16.camel@localhost> <20050107103604.GA4129@kikal.org> <1105546264.9002.13.camel@localhost> <20050112162647.GA9016@nxtelevision.com> Message-ID: <1105547369.9002.17.camel@localhost> > Under Win ? I believe there are a ntservice interface. ( vlc -I ntservice ) I am using linux > You have to add sfilter to your transcode chain. > Some thing like vlc -vvv --color -I http --sout > '#transcode{vcodec=mp4v,vb=900,acodec=mpga,ab=64,sfilter=logo}:standard{ > access=udp,mux=ts,url=239.x.x.x}' --logo-file="/home/nx/logo.png" > --logo-x=10 --logo-y=10 --ttl 12 thanks, will try this -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Wed Jan 12 18:52:43 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 12 Jan 2005 18:52:43 +0100 Subject: [vlc] Re: need help with a project In-Reply-To: <1105547369.9002.17.camel@localhost> References: <1105048907.8226.16.camel@localhost> <20050107103604.GA4129@kikal.org> <1105546264.9002.13.camel@localhost> <20050112162647.GA9016@nxtelevision.com> <1105547369.9002.17.camel@localhost> Message-ID: <20050112175243.GC16098@kikal.org> On Wed, Jan 12, 2005, Lewey Taylor wrote : > > Under Win ? I believe there are a ntservice interface. ( vlc -I ntservice ) > > I am using linux > Use the -d switch (or the screen program) -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jonesrf1 at qwest.net Wed Jan 12 22:25:13 2005 From: jonesrf1 at qwest.net (rod jones) Date: Wed, 12 Jan 2005 13:25:13 -0800 Subject: [vlc] Re: lost sound In-Reply-To: <20050110152102.54D0CB5CB@krishna.via.ecp.fr> References: <20050110152102.54D0CB5CB@krishna.via.ecp.fr> Message-ID: <41E595B9.9020603@qwest.net> I use vlc 0.7.2(wxWindows interface) automatically isntalled by FC3; It worked great! After I installed a new kernel from kernel.org (2.6.7) the sound quit working. I get a lot of messages re "looking for" and the a lot of "audio output is starving ... playing silence" messaages. The video comes through fine but the audio is jerky and hardly decipherable. I have no idea which of the many options I might tweak. Any ideas? I am used to installing new kernels and a variety of software but know very little about sound. The new kernel has all of the modules loaded but still no sound? I can play mp3 with mpg123 with no problems. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From pype at gameflux.com Thu Jan 13 10:49:38 2005 From: pype at gameflux.com (Pierre-Hugues PERET) Date: Thu, 13 Jan 2005 10:49:38 +0100 Subject: [vlc] always on top with skins2 video window not working Message-ID: <5.2.0.9.0.20050113104857.01cc4ea0@localhost> >Hello ! >Seems that the "always on top" option is not working when using the >skinable video window in skins2. anyone has an idea on how to make it working ? -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Wed Jan 12 13:36:42 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Wed, 12 Jan 2005 07:36:42 -0500 Subject: [vlc] VLC and Windows CE Message-ID: <20050112123725.E84AAB6AA@krishna.via.ecp.fr> I am tracking down memory leaks in VLC 0.7.1 running on Windows CE and have found the following In src/misc/messages.c, I had to add a call to FlushMsg(p_bank) at the end of the QueueMsg function to prevent a memory leak. Memory was being allocated for psz_msg and psz_module, but for some reason FlushMsg was never called to release the memory. Before QueueMsg ... PrintMsg( p_this, p_item ); if( p_bank->b_overflow ) { free( p_item->psz_module ); free( p_item->psz_msg ); } vlc_mutex_unlock( &p_bank->lock ); } Now QueueMsg ... PrintMsg( p_this, p_item ); if( p_bank->b_overflow ) { free( p_item->psz_module ); free( p_item->psz_msg ); } FlushMsg (p_bank); vlc_mutex_unlock( &p_bank->lock ); } I am also having problems with module_EndBank. In the original port, all calls to this were commented out which was causing a large memory leak. When I add it back, it releases memory properly and everything appears to be OK. How ever, for some reason, when my ocx returns to the caller, it crashes. Any ideas? -- Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From chunks1 at bigpond.net.au Wed Jan 12 20:55:23 2005 From: chunks1 at bigpond.net.au (chrissy) Date: Thu, 13 Jan 2005 06:55:23 +1100 Subject: [vlc] Help Message-ID: <000601c4f8e0$a854d0b0$0100000a@your1d94a9f233> Dear Vic, Please help, I have downloaded VLC and I am able to watch the movie, but my question is how can I download that onto a disc to watch on my DVD player, I can only watch it at the moment on my pc, the VLC screen doesn't have a copy or save button. So can you please help me. Regards Chrissy -------------- next part -------------- An HTML attachment was scrubbed... URL: From jonas at scttransport.dk Tue Jan 11 17:44:33 2005 From: jonas at scttransport.dk (jonas at scttransport.dk) Date: Tue, 11 Jan 2005 17:44:33 +0100 Subject: [vlc] Re: Simple VOD and transcoding solution - is VLC right app ? In-Reply-To: <00b701c4f7bb$73da06f0$65f7a8c0@Lapitopi> Message-ID: <20050111163034.0DDA7B5D2@krishna.via.ecp.fr> > Hi, Hello > > I have TV recordings on home web server in mpeg2. I'd like to access them > also from work, but since I'm on ADSL, download speed is too slow. So > would > like to transcode recordings on the fly. I'd like to have simple VOD > system > accessible from web page. I also use Misterhouse (Perl based home > automation > system) so any example in Perl would be more then welcome. > > Is VLC right fot the job (click on link to file on web page and play > streamed-transcoded video file) or should I take some other solution (it > should be open sourced) ? VLC is right, but I dont tihnk u can save http files that easily if u want them trancoded, maybe u can transcode them with http if u use vlc's http server, but i dont know much about that. *I would use VLC VLM feature, that will let u setup any transcoding options u might need. It uses RTSP instaid of http (Which is better anyway :)) Jonas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From fillo_22 at yahoo.it Wed Jan 12 14:44:35 2005 From: fillo_22 at yahoo.it (Filippo Zangheri) Date: Wed, 12 Jan 2005 14:44:35 +0100 (ora solare Europa occidentale) Subject: [vlc] mode 2 Message-ID: <41E529C3.000003.02144@MASTER> Hi everybody, I'm writing you to ask for a new interesting feature. I'm talking about format MODE 2 for CDs info here: http://webs.ono.com/usr016/de_xt/mcf.html I guess you've already heard about this. MODE 2 is a very useful format used expecially to extend the capacity of a CD-R in order to store on it video files (in some formats) up to 798 MB for 703 MB CD-Rs. Well, what I'm asking you is to add VLC the capability to read such a format If this is done: 1) Even Linux users will be able to read MODE 2 CDs; 2) Windows users will stop depending from Windows Media Player for that task Thank you in advance. -- Filippo Zangheri, Italy. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From steve at rms.bellsouth.net Wed Jan 12 16:35:35 2005 From: steve at rms.bellsouth.net (Steve Ger) Date: Wed, 12 Jan 2005 10:35:35 -0500 Subject: [vlc] Hauppauge WinTV-PVR-500MCE Message-ID: Does VLC support Hauppauge's 500 MCE card? I'm looking to stream data from two different cable boxes so it would be great to do it from one card. Thanks, --Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: From ludovic at penet.org Wed Jan 12 23:03:10 2005 From: ludovic at penet.org (Ludovic =?ISO-8859-1?Q?P=E9net?=) Date: Wed, 12 Jan 2005 23:03:10 +0100 Subject: [vlc] =?ISO-8859-1?Q?Vid=E9o?= libre pour France =?ISO-8859-1?Q?T=E9l=E9visions?= Message-ID: <1105567391.4782.19.camel@localhost> Bonjour. Je suis vice-pr?sident de l'APRIL (l'Association pour la Promotion et la Recherche en Informatique Libre) et je souhaite pr?parer avec vous une action vers France T?l?vision. FT diffuse en effet depuis maintenant quelques semaines ses ?missions uniquement en WMA, ce qui n'est pas sans poser de pbs aux utilisateurs de logiciels libres. Nous pourrions donc aller leur pr?senter une cha?ne compl?te (encodeur, serveur de flux, lecteur), avec ?ventuellement quelques goodies comme la diffusion en P2P avec Peercast. Je vis ? Sceaux. Pourrions-nous envisager de discuter de tout cela autour d'un verre un de ces soirs ? Cordialement, Ludovic P?net -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From claire.dujardin at futurenet.fr Thu Jan 13 12:18:45 2005 From: claire.dujardin at futurenet.fr (DUJARDIN , Claire) Date: Thu, 13 Jan 2005 12:18:45 +0100 Subject: [vlc] =?iso-8859-1?Q?Demande_d=27autorisation_de_diffusion_de_versio?= =?iso-8859-1?Q?n_d=27=E9valuation_/_freeware_/Video_Lan_Client_Media_P?= =?iso-8859-1?Q?layer?= Message-ID: Bonjour, Je m'appelle Claire Dujardin et je suis r?dactrice multim?dia au sein de la soci?t? Future France. Nous ?ditons de nombreux magazines informatiques tels que : Windows News, PC Jeux, Internet Pratique, Computer Arts, .Net, le magazine officiel microsoft Windows XP. ?tant en charge de la collecte et des tests de programmes pour nos CD-Roms, je vous contacte car nous avons test? r?cemment le logiciel Video Lan Client Media Player. Nous souhaiterions avoir votre autorisation pour l'inclure sur un de nos prochains CD-Roms. Pour ce faire, renvoyez-nous ce mail rempli (le plus rapidement possible) ? l'adresse suivante Claire.dujardin at futurenet.fr . Je, (Nom)___________________ repr?sentant la soci?t? _________________ autorise la soci?t? Future France ? distribuer la version shareware, freeware, ou de d?mo. du logiciel Video Lan Client Media Playersur les CD-Roms de Windows News, PC Jeux, Internet Pratique, Computer Arts, .Net, Le magazine officiel Microsoft Windows XP, digital Photo Magazine, ainsi que de futures publications. De plus, pouvez-vous nous indiquer les limitations exactes concernant ces logiciels (complet/illimit?, complet 30 jours, illimit? dans le temps mais limit? dans les fonctions...) ainsi que le/les syst?mes d'exploitation que vous recommandez: ............................................................................ ............................................................................ .............................................. Commercialisez-vous votre logiciel en France via un distributeur ?........................................................................... ........................................... Si oui, lequel ?........................................................................... ............................................................................ ................................................ Date : Signature : Claire, R?dactrice multim?dia Claire.dujardin at futurenet.fr FUTURE France Windows News, Windows XP Magazine, .net, Internet Pratique, Computer Arts, DigitalPhoto magazine, PC Jeux, Jeux Vid?o Magazine, Joystick PSM 2, Playstation 2 magazine, Nintendo magazine, XBox magazine. 101-109, rue Jean Jaur?s 92300 Levallois-Perret France T?l : +33 1 41 27 38 38 -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Thu Jan 13 16:54:41 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 13 Jan 2005 16:54:41 +0100 Subject: [vlc] Re: Help In-Reply-To: <000601c4f8e0$a854d0b0$0100000a@your1d94a9f233> References: <000601c4f8e0$a854d0b0$0100000a@your1d94a9f233> Message-ID: <20050113155441.GC21482@kikal.org> On Thu, Jan 13, 2005, chrissy wrote : > Dear Vic, > Please help, I have downloaded VLC and I am able to watch the movie, but my question is how can I download that onto a disc to watch on my DVD player, I can only watch it at the moment on my pc, the VLC screen doesn't have a copy or save button. So can you please help me. > Regards > Chrissy Well, have a look at the stream output feature in the Open dialog. You can save your stream in a format usable by a DVD player (MPEG2, PS encapsulation), but you'll need a DVD authoring software in addition... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From massiot at via.ecp.fr Thu Jan 13 19:58:00 2005 From: massiot at via.ecp.fr (Christophe Massiot) Date: Thu, 13 Jan 2005 19:58:00 +0100 Subject: [vlc] DVB drivers and QPSK Message-ID: <20050113185800.GB19228@via.ecp.fr> If you are using the dvb access module with a recent kernel or linuxtv development snapshot, you may experience a kernel oops when tuning. To solve the issue : - either upgrade to the latest cvs of dvb-kernel (linuxtv.org) - or comment out the FE_ENABLE_HIGH_LNB_VOLTAGE ioctl in modules/access/dvb/linux_dvb.c -- Christophe Massiot. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dionoea at via.ecp.fr Thu Jan 13 21:06:49 2005 From: dionoea at via.ecp.fr (Antoine Cellerier) Date: Thu, 13 Jan 2005 21:06:49 +0100 Subject: [vlc] Re: Demande =?iso-8859-1?Q?d'autoris?= =?iso-8859-1?Q?ation_de_diffusion_de_version_d'=E9valuatio?= =?iso-8859-1?Q?n?= / freeware /Video Lan Client Media Player In-Reply-To: References: Message-ID: <20050113200649.GC26392@via.ecp.fr> Bonjour, On Thu, Jan 13, 2005, DUJARDIN , Claire wrote: > ?tant en charge de la collecte et des tests de programmes pour nos CD-Roms, > je vous contacte car nous avons test? r?cemment le logiciel Video Lan Client > Media Player. Nous souhaiterions avoir votre autorisation pour l'inclure sur > un de nos prochains CD-Roms. Le "VLC media player" (media player tout en minuscules) est un logiciel sous license GPL. Vous pouvez donc le distribuer librement ? condition que vous fournissiez le code source ou un moyen de r?cup?rer ce code source avec le CD-Rom de distribution. La solution la plus simple est de fournir un lien vers le code source. Il d?coule de cette m?me licence que le logiciel est enti?rement gratuit. Il fonctionne sur un grand nombre de syst?mes d'exploitation dont Windows, Mac OS X et Linux (voir http://www.videolan.org/vlc) Cordialement, -- Antoine Cellerier -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From vincent.listes at ahoup.net Fri Jan 14 09:04:34 2005 From: vincent.listes at ahoup.net (Vincent Derrien) Date: Fri, 14 Jan 2005 09:04:34 +0100 Subject: [vlc] Re: DVB drivers and QPSK In-Reply-To: <20050113185800.GB19228@via.ecp.fr> References: <20050113185800.GB19228@via.ecp.fr> Message-ID: <41E77D12.5000100@ahoup.net> Christophe Massiot a ?crit : >If you are using the dvb access module with a recent kernel or linuxtv >development snapshot, you may experience a kernel oops when tuning. To >solve the issue : > >- either upgrade to the latest cvs of dvb-kernel (linuxtv.org) >- or comment out the FE_ENABLE_HIGH_LNB_VOLTAGE ioctl in > modules/access/dvb/linux_dvb.c > > > Is the problem solve the most recent kernel (2.6.10 or the dev version) ? -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From helios at acre-c.com Fri Jan 14 00:33:31 2005 From: helios at acre-c.com (Keith) Date: Thu, 13 Jan 2005 18:33:31 -0500 Subject: [vlc] playing .sub files Message-ID: <000a01c4f9c8$6210f370$6501a8c0@ksound> Hi, I usually don't have any trouble playing subtitles with videolan, but I have here a .sub and .idx file, and videolan isn't recognizing either one of them. And vob sub will not come up either when I open videolan. With other players the subtitles play fine, but I prefer videolan. Thanks, Keith -------------- next part -------------- An HTML attachment was scrubbed... URL: From bigben+spam at videolan.org Fri Jan 14 15:44:07 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Fri, 14 Jan 2005 15:44:07 +0100 Subject: [vlc] Re: playing .sub files In-Reply-To: <000a01c4f9c8$6210f370$6501a8c0@ksound> References: <000a01c4f9c8$6210f370$6501a8c0@ksound> Message-ID: <20050114144407.GC21942@kikal.org> On Thu, Jan 13, 2005, Keith wrote : > Hi, I usually don't have any trouble playing subtitles with videolan, but I have here a .sub and .idx file, and videolan isn't recognizing either one of them. And vob sub will not come up either when I open videolan. With other players the subtitles play fine, but I prefer videolan. > > Thanks, > Keith Check that your have the lates version of VLC (vobsubs can only be read with a version > 0.8.0). If you are already using such a version, please send us the content of the view->messages panel when trying to open the file. Please also check if the subtitle track isn't present in the video->subtitles menu, but disabled. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From chunks1 at bigpond.net.au Fri Jan 14 19:49:31 2005 From: chunks1 at bigpond.net.au (chrissy) Date: Sat, 15 Jan 2005 05:49:31 +1100 Subject: [vlc] Help Message-ID: <000601c4fa69$c90e1570$0100000a@your1d94a9f233> Hi, I have downloaded VLC onto my PC and all I can do is watch the movie on my PC, how can I burn it to a dvd, please help I've tried everything. Regards Chrissy -------------- next part -------------- An HTML attachment was scrubbed... URL: From ian at ianbrandt.com Sat Jan 15 20:29:58 2005 From: ian at ianbrandt.com (Ian Brandt) Date: Sat, 15 Jan 2005 11:29:58 -0800 Subject: [vlc] Multiple Video Filters on OS X? Message-ID: <41E96F36.6080704@ianbrandt.com> Hi, Is it possible to use multiple video filters with the OS X port? The UI only allows you to select one via a drop down. I tried editing ~/Library/Preferences/VLC/vlcrc setting 'filter=crop,deinterlace' and such, but I only ever seem to get the first one specified. Thanks, Ian -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dionoea at via.ecp.fr Sat Jan 15 22:35:48 2005 From: dionoea at via.ecp.fr (Antoine Cellerier) Date: Sat, 15 Jan 2005 22:35:48 +0100 Subject: [vlc] Re: =?iso-8859-1?Q?Vid=E9o_libre_pou?= =?iso-8859-1?Q?r_France_T=E9l=E9visions?= In-Reply-To: <1105567391.4782.19.camel@localhost> References: <1105567391.4782.19.camel@localhost> Message-ID: <20050115213548.GA22077@via.ecp.fr> Bonjour, On Wed, Jan 12, 2005, Ludovic P?net wrote: > FT diffuse en effet depuis maintenant quelques semaines ses ?missions > uniquement en WMA, ce qui n'est pas sans poser de pbs aux utilisateurs > de logiciels libres. Nous pourrions donc aller leur pr?senter une cha?ne > compl?te (encodeur, serveur de flux, lecteur), avec ?ventuellement > quelques goodies comme la diffusion en P2P avec Peercast. Nous serions ravis de vous rencontrer afin de vous montrer les diverses possibilit?s d'utilisations des logiciels VideoLAN ainsi que l'installation mise en place sur le campus de l'Ecole Centrale Paris. La semaine prochaine est malheureusement tr?s charg?e. Je vous propose donc de venir le mardi 25. A bient?t je l'esp?re. Cordialement, -- Antoine Cellerier -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jean-paul.saman at planet.nl Sun Jan 16 10:08:20 2005 From: jean-paul.saman at planet.nl (Jean-Paul Saman) Date: Sun, 16 Jan 2005 10:08:20 +0100 Subject: [vlc] Re: =?ISO-8859-1?Q?Vid=E9o_libre_pour_France_T?= =?ISO-8859-1?Q?=E9l=E9visions?= In-Reply-To: <20050115213548.GA22077@via.ecp.fr> References: <1105567391.4782.19.camel@localhost> <20050115213548.GA22077@via.ecp.fr> Message-ID: <41EA2F04.4070306@planet.nl> Can someone translate this for me please? Antoine Cellerier wrote: >Bonjour, > >On Wed, Jan 12, 2005, Ludovic P?net wrote: > > >>FT diffuse en effet depuis maintenant quelques semaines ses ?missions >>uniquement en WMA, ce qui n'est pas sans poser de pbs aux utilisateurs >>de logiciels libres. Nous pourrions donc aller leur pr?senter une cha?ne >>compl?te (encodeur, serveur de flux, lecteur), avec ?ventuellement >>quelques goodies comme la diffusion en P2P avec Peercast. >> >> > >Nous serions ravis de vous rencontrer afin de vous montrer les diverses >possibilit?s d'utilisations des logiciels VideoLAN ainsi que >l'installation mise en place sur le campus de l'Ecole Centrale Paris. > >La semaine prochaine est malheureusement tr?s charg?e. Je vous propose >donc de venir le mardi 25. > >A bient?t je l'esp?re. > >Cordialement, > > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From courmisch at via.ecp.fr Sun Jan 16 10:36:13 2005 From: courmisch at via.ecp.fr (=?iso-8859-1?q?R=E9mi_Denis-Courmont?=) Date: Sun, 16 Jan 2005 10:36:13 +0100 Subject: [vlc] Re: =?iso-8859-1?q?Vid=E9o_libre_pour_France?= =?iso-8859-1?q?_T=E9l=E9visions?= In-Reply-To: <41EA2F04.4070306@planet.nl> References: <1105567391.4782.19.camel@localhost> <20050115213548.GA22077@via.ecp.fr> <41EA2F04.4070306@planet.nl> Message-ID: <200501161036.13729.courmisch@via.ecp.fr> [Translation] Could be much better. > Ludovic P?net wrote: > Hello. > > I am vice-president of the APRIL (association for promotion and > research in free software) and I wish to prepare an action toward > France T?l?vision with you. > France T?l?visions [french public TV channels] has namely been using > WMA exclusively for a few eeks, which is not without raising problems > to users of free software. We could therefore show them a complete > chain (encoder, streaming server, player), possibly with some goodies > such as P2P streaming with Peercast. > > I live in Sceaux. Could we considr discussing about all of that at a > pub one evening ? > > Cordially, Antoine Cellerier replied: > Hello, > > We'd be happy to meet you to show the various possible abilities of > the VideoLAN's software, as well as the hardware setup at the campus > of the ECP. > > We're unfortunately very busy next week. I propose you come on Tuesday > the 25th. > > I hope to see you soon. > > Cordially. -- R?mi Denis-Courmont http://www.simphalempin.com/home/ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From zorglub at via.ecp.fr Sun Jan 16 10:48:09 2005 From: zorglub at via.ecp.fr (=?ISO-8859-1?Q?Cl=E9ment_Stenac?=) Date: Sun, 16 Jan 2005 10:48:09 +0100 Subject: [vlc] Re: Multiple Video Filters on OS X? In-Reply-To: <41E96F36.6080704@ianbrandt.com> References: <41E96F36.6080704@ianbrandt.com> Message-ID: <41EA3859.2060808@via.ecp.fr> Hello, > Is it possible to use multiple video filters with the OS X port? The UI > only allows you to select one via a drop down. I tried editing > ~/Library/Preferences/VLC/vlcrc setting 'filter=crop,deinterlace' and > such, but I only ever seem to get the first one specified. In version 0.8.1, the separator for video filter is ":" (this will be changed to "," in 0.8.2 for consistency reasons) So you need to use 'filter=crop:deinterlace' -- Zorglub Cl?ment Stenac -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From fdbryant3 at myrealbox.com Sat Jan 15 10:10:09 2005 From: fdbryant3 at myrealbox.com (F. D. Bryant III) Date: Sat, 15 Jan 2005 04:10:09 -0500 Subject: [vlc] VideoLAN for portable devices Message-ID: <41E8DDF1.8010806@myrealbox.com> Have you considered making a version of VideoLAN for PDA's and other portable media devices (in particular I'm thinking of devices supporting the PalmOS)? -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.12 - Release Date: 1/14/2005 -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Sun Jan 16 11:39:50 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sun, 16 Jan 2005 11:39:50 +0100 Subject: [vlc] Re: VideoLAN for portable devices In-Reply-To: <41E8DDF1.8010806@myrealbox.com> References: <41E8DDF1.8010806@myrealbox.com> Message-ID: <20050116103950.GA799@kikal.org> On Sat, Jan 15, 2005, F. D. Bryant III wrote : > Have you considered making a version of VideoLAN for PDA's and other > portable media devices (in particular I'm thinking of devices supporting > the PalmOS)? > A Zaurus/Familiar linux version of VLC has been available for quite a while now... An experimental Windows CE version of 0.7.1 is available here: http://sourceforge.net/projects/vlcpocketpc/ This port should be improved and merged in the main tree quite soon. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jean-paul.saman at planet.nl Sun Jan 16 11:53:50 2005 From: jean-paul.saman at planet.nl (Jean-Paul Saman) Date: Sun, 16 Jan 2005 11:53:50 +0100 Subject: [vlc] Re: VideoLAN for portable devices In-Reply-To: <20050116103950.GA799@kikal.org> References: <41E8DDF1.8010806@myrealbox.com> <20050116103950.GA799@kikal.org> Message-ID: <41EA47BE.2010407@planet.nl> Benjamin PRACHT wrote: >On Sat, Jan 15, 2005, F. D. Bryant III wrote : > > >>Have you considered making a version of VideoLAN for PDA's and other >>portable media devices (in particular I'm thinking of devices supporting >>the PalmOS)? >> >> >> > >A Zaurus/Familiar linux version of VLC has been available for quite a >while now... An experimental Windows CE version of 0.7.1 is available >here: http://sourceforge.net/projects/vlcpocketpc/ > >This port should be improved and merged in the main tree quite soon. > > > We have a Zaurus, Yopy and iPAQ Familiar Linux port for VLC, but no PalmOS port. Greetings, Jean-Paul Saman -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ludovic at penet.org Sun Jan 16 10:28:51 2005 From: ludovic at penet.org (Ludovic =?ISO-8859-1?Q?P=E9net?=) Date: Sun, 16 Jan 2005 10:28:51 +0100 Subject: [vlc] Re: =?ISO-8859-1?Q?Vid=E9o?= libre pour France =?ISO-8859-1?Q?T=E9l=E9visions?= In-Reply-To: <41EA2F04.4070306@planet.nl> References: <1105567391.4782.19.camel@localhost> <20050115213548.GA22077@via.ecp.fr> <41EA2F04.4070306@planet.nl> Message-ID: <1105867732.4810.33.camel@localhost> Le dimanche 16 janvier 2005 ? 10:08 +0100, Jean-Paul Saman a ?crit : > Can someone translate this for me please? I asked for a meeting with vlc team in order to prepare a request to France Televisions, France national television company. It uses WMA for its videos since a few weeks and, as it is a public service, I would like to propose them to also use a public format and publicly available tools. In software, this translates to open standards and free software. Antoine replied by proposing me to come at the ?cole Centrale to view thein installation on Tuesday, the 25th. Regards, Ludovic -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From regulator79 at yahoo.com Sun Jan 16 19:39:31 2005 From: regulator79 at yahoo.com (regulator79) Date: Sun, 16 Jan 2005 10:39:31 -0800 Subject: [vlc] Great software Message-ID: Dear VideoLan group, This is the all-in-one player that all of the large software companies can't create! This is definitely the best as it plays all formats I have: avi, wma, mp3, etc. In particular, errors which stop QuickTime in its tracks will not stop VLC. Next I will try the streaming solutions. I'm not looking for a job. As a programmer I am interested in emailing a developer to understand how this project was developed. By the way, my system is OSX. Best regards, Shine-Tay Ni Keep doing what you're doing to get what you're getting. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From edwinpenalo at verizon.net.do Sun Jan 16 22:37:28 2005 From: edwinpenalo at verizon.net.do (=?ISO-8859-1?Q?Edwin_Pe=F1al=F3?=) Date: Sun, 16 Jan 2005 17:37:28 -0400 Subject: [vlc] software do not working Message-ID: Hi the software VLC is not working well I was watching a film and its stop and force quit. I open it again and only appears in the menus (file, view, window, etc.) VLC and the other disappear I download again and nothing happen please help me what can I do for resolve it? Thanks you a lot Edwin Penalo -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From edwinpenalo at verizon.net.do Sun Jan 16 23:53:11 2005 From: edwinpenalo at verizon.net.do (=?ISO-8859-1?Q?Edwin_Pe=F1al=F3?=) Date: Sun, 16 Jan 2005 18:53:11 -0400 Subject: [vlc] software do not working Message-ID: <65777613-6811-11D9-8D8D-000D93B6EEB6@verizon.net.do> Hi the software VLC is not working well I was watching a film and its stop and force quit. I open it again and only appears in the menus (file, view, window, etc.) VLC and the other disappear I download again and nothing happen please help me what can I do for resolve it? I have Mac OS X 10.3.7 iMac Power PC G5 VLC version 0.8.1 Thanks you a lot Edwin Pe?alo -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 397 bytes Desc: not available URL: From conundrums at gmail.com Mon Jan 17 09:57:41 2005 From: conundrums at gmail.com (Hussain) Date: Mon, 17 Jan 2005 09:57:41 +0100 Subject: [vlc] Re: hello In-Reply-To: <000601c07f9f$df4e1d60$1e860250@ASPIRE1310> References: <000601c07f9f$df4e1d60$1e860250@ASPIRE1310> Message-ID: <9466e643050117005759dee655@mail.gmail.com> Hi, did you enable the livedotcom module when you installed VLC. I think that could be a possible problem, i.e the livedotcom module is not enabled. Hussain On Tue, 16 Jan 2001 09:36:56 -0000, luigi wrote: > > Please I need some help. > I just downloaded videolan and I'm tring to recieve streaming channels but > there is no way I even tried to swittch off the windows firewall but no way. > All I get is: > > > main warning: no access_demux module matched "udp" > > main debug: access2_New: access='udp' path='@[::]' > > main debug: looking for access2 module > > main debug: probing 5 candidates > > access_udp debug: opening server=:0 local=[::]:1234 > > main debug: net: connecting to ':0@[::]:1234' > > main debug: looking for network module > > main debug: probing 2 candidates > > ipv4 debug: could not build local address > > ipv6 warning: cannot create socket (No error) > > main debug: net: connection to ':0@[::]:1234' failed > > access_udp error: cannot open socket > > access_file warning: cannot stat() file `@[::]' (No such file or directory) > > cdda debug: trying .cue file: @[::].cue > > cdda warning: could not open @[::] > > main warning: no access2 module matching "udp" could be loaded > > main error: no suitable access module for `udp://@[::]' > > main debug: thread 3388 joined (src/input/input.c:290) > > main debug: adding playlist item `rtsp://' ( rtsp:// ) > > main debug: creating new input thread > > main debug: waiting for thread completion > > main debug: `rtsp://' gives access `rtsp' demux `' path `' > > main debug: demux2_New: access='rtsp' demux='' path='' > > main debug: looking for access_demux module > > main debug: probing 1 candidate > > main debug: thread 3400 (input) created at priority 1 > (src/input/input.c:228) > > livedotcom error: describeURL failed (connect() failed: Unknown error) > > main warning: no access_demux module matching "rtsp" could be loaded > > main debug: access2_New: access='rtsp' path='' > > main debug: looking for access2 module > > main debug: probing 4 candidates > > access_file warning: cannot stat() file `' (No such file or directory) > > main warning: no access2 module matching "rtsp" could be loaded > > main error: no suitable access module for `rtsp://' > > main debug: thread 3400 joined (src/input/input.c:290)Please help. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From roberto.politi at csp.it Mon Jan 17 18:43:59 2005 From: roberto.politi at csp.it (Roberto Politi) Date: Mon, 17 Jan 2005 18:43:59 +0100 Subject: [vlc] command line Message-ID: <04a501c4fcbc$1ffc5be0$050974c2@csp.it> hello, does anybody know hot I can start playing an AudioCD with vlc from command line with goom effect activated? (I am only able to start the CD but i have to manually start goom). Thanks in advance, Roberto -------------- next part -------------- An HTML attachment was scrubbed... URL: From bigben+spam at videolan.org Mon Jan 17 18:56:11 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Mon, 17 Jan 2005 18:56:11 +0100 Subject: [vlc] Re: command line In-Reply-To: <04a501c4fcbc$1ffc5be0$050974c2@csp.it> References: <04a501c4fcbc$1ffc5be0$050974c2@csp.it> Message-ID: <20050117175611.GB1859@kikal.org> On Mon, Jan 17, 2005, Roberto Politi wrote : > hello, > does anybody know hot I can start playing an AudioCD with vlc from command line with goom effect activated? (I am only able to start the CD but i have to manually start goom). > > Have a look at the --audio-visual option -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From roberto.politi at csp.it Mon Jan 17 19:02:38 2005 From: roberto.politi at csp.it (Roberto Politi) Date: Mon, 17 Jan 2005 19:02:38 +0100 Subject: [vlc] Re: command line References: <04a501c4fcbc$1ffc5be0$050974c2@csp.it> <20050117175611.GB1859@kikal.org> Message-ID: <04af01c4fcbe$bb4bcf70$050974c2@csp.it> > Have a look at the --audio-visual option > Thanks for the quick answer. I tried but the answer is: "The command line options couldn't be loaded, check that they are valid." Where can I find a list of all available options? (if I try a --longhelp the list of options full my command windows buffer and I can only see last 1024 linesor, how cani I redirect --longhelp output to a file? Thanks, Roberto -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Mon Jan 17 19:08:09 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Mon, 17 Jan 2005 19:08:09 +0100 Subject: [vlc] Re: command line In-Reply-To: <04af01c4fcbe$bb4bcf70$050974c2@csp.it> References: <04a501c4fcbc$1ffc5be0$050974c2@csp.it> <20050117175611.GB1859@kikal.org> <04af01c4fcbe$bb4bcf70$050974c2@csp.it> Message-ID: <20050117180808.GA27136@kikal.org> On Mon, Jan 17, 2005, Roberto Politi wrote : > > Have a look at the --audio-visual option > > > > Thanks for the quick answer. > I tried but the answer is: "The command line options couldn't be loaded, > check that they are valid." > > Where can I find a list of all available options? (if I try a --longhelp the > list of options full my command windows buffer and I can only see last 1024 > linesor, how cani I redirect --longhelp output to a file? > In your case, the complete option would certainly be --audio-visual goom. You can get the list of all available options using --longhelp --advanced. You can redirect the output tu a file using "> file" at the end of the command line, as for any shell command... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From roberto.politi at csp.it Tue Jan 18 08:38:05 2005 From: roberto.politi at csp.it (Roberto Politi) Date: Tue, 18 Jan 2005 08:38:05 +0100 Subject: [vlc] Re: command line References: <04a501c4fcbc$1ffc5be0$050974c2@csp.it> <20050117175611.GB1859@kikal.org> <04af01c4fcbe$bb4bcf70$050974c2@csp.it> <20050117180808.GA27136@kikal.org> Message-ID: <04b701c4fd30$a60d6610$050974c2@csp.it> > In your case, the complete option would certainly be --audio-visual > goom. > > You can get the list of all available options using --longhelp > --advanced. You can redirect the output tu a file using "> file" at the > end of the command line, as for any shell command... Redirection to a file with the > doesn't work either because the output is written in a new windows and the file output.txt created is 0 bytes long I tried the option you suggested but doesn't works (at least on my winxp system). I'm using the precompiled Windows version. Does it lacks any module/option? Do I have to get another version? Thanks, Roberto -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From eb at pltplp.net Tue Jan 18 11:51:19 2005 From: eb at pltplp.net (Etienne Bernard) Date: Tue, 18 Jan 2005 11:51:19 +0100 Subject: [vlc] Streaming with subtitle track Message-ID: <20050118105119.GA13930@fullsix.com> Hi, I'm trying to stream with VLC (version 0.8.1) an AVI file with a .srt subtitle file. $ vlc -I http --http-host=10.0.0.1:8000 --sout '#std{access=udp,mux=ts,url=10.1.0.0}' file.avi :sub-file=english.srt On the 10.1.0.0 box, I receive the stream correctly, the subtitle track is found by VLC (windows version), but the subtitles are just "flashing" : I mean that they seem to appear at the right time, but they disappear immediately. Is this a known bug of vlc? The problem occurs with both udp streaming and streaming to a file. By the way, do someone know how to multiplex a subtitle track into an avi file ? I tried with spumux, but with no success. Thanks, -- Etienne BERNARD -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Digital signature URL: From jfburns at gmail.com Tue Jan 18 14:33:01 2005 From: jfburns at gmail.com (James Burns) Date: Tue, 18 Jan 2005 08:33:01 -0500 Subject: [vlc] Re: Streaming with subtitle track In-Reply-To: <20050118105119.GA13930@fullsix.com> References: <20050118105119.GA13930@fullsix.com> Message-ID: <77114b9050118053375fe62f8@mail.gmail.com> Someone will probably give you a better answer soon, but if you want to render the subtitles onto the stream you might want to do: vlc --sout '#transcode{vcodec=copy,acodec=copy,soverlay}:std{access=udp,mux=ts,url=10.1.0.0}' file.avi --sub-file=english.srt --spu-channel=0 I'm not sure about the "copy" stuff and how that interacts w/ soverlay. see: http://www.via.ecp.fr/via/ml/vlc/2004-10/msg00262.html http://www.videolan.org/doc/streaming-howto/en/ch03.html -James On Tue, 18 Jan 2005 11:51:19 +0100, Etienne Bernard wrote: > Hi, > > I'm trying to stream with VLC (version 0.8.1) an AVI file with a .srt > subtitle file. > > $ vlc -I http --http-host=10.0.0.1:8000 --sout '#std{access=udp,mux=ts,url=10.1.0.0}' file.avi :sub-file=english.srt > > On the 10.1.0.0 box, I receive the stream correctly, the subtitle > track is found by VLC (windows version), but the subtitles are just > "flashing" : I mean that they seem to appear at the right time, but > they disappear immediately. > > Is this a known bug of vlc? The problem occurs with both udp streaming > and streaming to a file. > > By the way, do someone know how to multiplex a subtitle track into an > avi file ? I tried with spumux, but with no success. > > Thanks, > -- > Etienne BERNARD > > > -- "We are friends with those whose ideas are at the same level of confusion as our own." - Proust -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From eb at pltplp.net Tue Jan 18 17:11:07 2005 From: eb at pltplp.net (Etienne Bernard) Date: Tue, 18 Jan 2005 17:11:07 +0100 Subject: [vlc] Re: Streaming with subtitle track In-Reply-To: <77114b9050118053375fe62f8@mail.gmail.com> References: <20050118105119.GA13930@fullsix.com> <77114b9050118053375fe62f8@mail.gmail.com> Message-ID: <200501181711.07398.eb@pltplp.net> Le Mardi 18 Janvier 2005 14:33, James Burns a ?crit?: > Someone will probably give you a better answer soon, but if you want > to render the subtitles onto the stream you might want to do: > > vlc --sout > '#transcode{vcodec=copy,acodec=copy,soverlay}:std{access=udp,mux=ts,url= >10.1.0.0}' file.avi --sub-file=english.srt --spu-channel=0 > > I'm not sure about the "copy" stuff and how that interacts w/ soverlay. > Thanks, I'm sure that the final result is ok, but I do not want to "burn" the subtitles into my stream, so that I can switch off the subtitles during playback. -- Etienne BERNARD -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From niklas.fondberg at i3micro.com Tue Jan 18 17:23:09 2005 From: niklas.fondberg at i3micro.com (Niklas Fondberg) Date: Tue, 18 Jan 2005 17:23:09 +0100 Subject: [vlc] SAP server Message-ID: <41ED37ED.4020701@i3micro.com> Maybe I should've posted this on one of the other lists but could not find a suitable one, so I chose the one with most traffic... I remember that I saw a java implementation of the mini sapserver at videolan in the past. I can't find it now except in a Google search where I get http://developers.videolan.org/cgi-bin/viewcvs.cgi/manager/src/org/videolan/manager/SAP/SAPServer.java?cvsroot=VideoLAN however that link is dead. Anybody know anything about it? /Niklas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Tue Jan 18 18:03:47 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Tue, 18 Jan 2005 18:03:47 +0100 Subject: [vlc] Re: Streaming with subtitle track In-Reply-To: <20050118105119.GA13930@fullsix.com> References: <20050118105119.GA13930@fullsix.com> Message-ID: <20050118170347.GA14347@kikal.org> On Tue, Jan 18, 2005, Etienne Bernard wrote : > Hi, > > I'm trying to stream with VLC (version 0.8.1) an AVI file with a .srt > subtitle file. > > $ vlc -I http --http-host=10.0.0.1:8000 --sout '#std{access=udp,mux=ts,url=10.1.0.0}' file.avi :sub-file=english.srt > > On the 10.1.0.0 box, I receive the stream correctly, the subtitle > track is found by VLC (windows version), but the subtitles are just > "flashing" : I mean that they seem to appear at the right time, but > they disappear immediately. > You should transcode the subtitle track (add a transcode{scodec=dvb} at the beginning of your sout chain...) > Is this a known bug of vlc? The problem occurs with both udp streaming > and streaming to a file. > > By the way, do someone know how to multiplex a subtitle track into an > avi file ? I tried with spumux, but with no success. > AFAIK, avi doesn't support spu tracks. You should remux your file to ogm or mkv. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From chevriaus at yahoo.fr Tue Jan 18 19:15:43 2005 From: chevriaus at yahoo.fr (=?iso-8859-1?q?S=E9bastien=20Chevriau?=) Date: Tue, 18 Jan 2005 19:15:43 +0100 (CET) Subject: [vlc] How can I ? In-Reply-To: <200410051030.32387.gbazin@altern.org> Message-ID: <20050118181543.49663.qmail@web26105.mail.ukl.yahoo.com> Hi all, I am working in Belfort University (France) and I am trying to modify VLC player in order to be able to control the speed of the playback by the serial port (read a digital value like 100 for 1x or 150 for 1,5x) My problem is that I am a beginner in Cygwin using. So I am not able to find methods that allow me to access the serial port. Is there someone who know which methods cna I use and how must I put them in VLC in order to compile for Windows. Thank in advance for all answers. Seb. D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mfmbusiness at earthlink.net Tue Jan 18 19:19:52 2005 From: mfmbusiness at earthlink.net (Mark Moriarty) Date: Tue, 18 Jan 2005 13:19:52 -0500 Subject: [vlc] Re: How can I ? In-Reply-To: <20050118181543.49663.qmail@web26105.mail.ukl.yahoo.com> Message-ID: Is it a hard requirement, control via serial port? If you could accept socket-based control (e.g., messages pushed over an Ethernet socket), you could work through the rc interface. -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of S?bastien Chevriau Sent: Tuesday, January 18, 2005 1:16 PM To: vlc at videolan.org Subject: [vlc] How can I ? Hi all, I am working in Belfort University (France) and I am trying to modify VLC player in order to be able to control the speed of the playback by the serial port (read a digital value like 100 for 1x or 150 for 1,5x) My problem is that I am a beginner in Cygwin using. So I am not able to find methods that allow me to access the serial port. Is there someone who know which methods cna I use and how must I put them in VLC in order to compile for Windows. Thank in advance for all answers. Seb. D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From chevriaus at yahoo.fr Tue Jan 18 19:23:09 2005 From: chevriaus at yahoo.fr (=?iso-8859-1?q?S=E9bastien=20Chevriau?=) Date: Tue, 18 Jan 2005 19:23:09 +0100 (CET) Subject: [vlc] Re: How can I ? In-Reply-To: Message-ID: <20050118182309.50328.qmail@web26105.mail.ukl.yahoo.com> Hi Mark, --- Mark Moriarty a ?crit : > Is it a hard requirement, control via serial port? > If you could accept > socket-based control (e.g., messages pushed over an > Ethernet socket), you > could work through the rc interface. Can you explain more ? it's interesting me. Seb D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mfmbusiness at earthlink.net Tue Jan 18 19:37:28 2005 From: mfmbusiness at earthlink.net (Mark Moriarty) Date: Tue, 18 Jan 2005 13:37:28 -0500 Subject: [vlc] Re: How can I ? In-Reply-To: <20050118182309.50328.qmail@web26105.mail.ukl.yahoo.com> Message-ID: Vlc has a remote control interface (as well as a Telnet/VLM interface, an http interface,...) allowing control of VLC over a socket. For example, on Windows I open a command prompt in the directory with vlc, and launch vlc with: vlc --rc-extend --extraintf="rc" --rc-host="192.168.2.50:20" --rc-quiet (substitute whatever your IP address is) I then open a Telnet app, like TeraTerm Pro, connect to 192.168.2.50 port 20. It is a "raw" socket connection, not truly Telnet protocol (the Telnet/VLM interface, I believe, is a true Telnet). The basic telnet built into Windows works for this. You would open a command prompt, type in: Telnet 192.168.2.50 20 Type in Help, and it spits out the commands currently implemented in rc. The interface lets you start a playlist item, control volume, seek, ..., via this socket interface. -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of S?bastien Chevriau Sent: Tuesday, January 18, 2005 1:23 PM To: vlc at videolan.org Subject: [vlc] Re: How can I ? Hi Mark, --- Mark Moriarty a ?crit : > Is it a hard requirement, control via serial port? > If you could accept > socket-based control (e.g., messages pushed over an Ethernet socket), > you could work through the rc interface. Can you explain more ? it's interesting me. Seb D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dani at ardex.bg Tue Jan 18 22:36:30 2005 From: dani at ardex.bg (Danislav Kostov) Date: Tue, 18 Jan 2005 23:36:30 +0200 Subject: [vlc] Re: Streaming with subtitle track References: <20050118105119.GA13930@fullsix.com> <20050118170347.GA14347@kikal.org> Message-ID: <000201c4fda5$c9097d50$de00a8c0@arena.net> Hi! Thanks for the answer!!! (i needed that too :-))) But what to do if with scodec=dvb or scodec=dvbs doesn't wark? stream_out_transcode debug: creating subtitles transcoding from fcc=`subt' to fcc=`dvbs' main debug: looking for decoder module main debug: probing 24 candidates subsdec debug: using character encoding: CP1251 main debug: using decoder module "subsdec" main debug: looking for encoder module main debug: probing 10 candidates main debug: using encoder module "dvbsub" stream_out_duplicate debug: duplicated a new stream codec=dvbs (es=2 group=0) main debug: adding a new input mux_ts debug: adding input codec=dvbs pid=70 stream_out_duplicate debug: - added for output 0 dvbsub debug: encoding subpicture And vlc crashes. Thank you, you are the best and I think you know it! Dani. ----- Original Message ----- From: "Benjamin PRACHT" To: Sent: Tuesday, January 18, 2005 7:03 PM Subject: [vlc] Re: Streaming with subtitle track > On Tue, Jan 18, 2005, Etienne Bernard wrote : >> Hi, >> >> I'm trying to stream with VLC (version 0.8.1) an AVI file with a .srt >> subtitle file. >> >> $ vlc -I http --http-host=10.0.0.1:8000 --sout >> '#std{access=udp,mux=ts,url=10.1.0.0}' file.avi :sub-file=english.srt >> >> On the 10.1.0.0 box, I receive the stream correctly, the subtitle >> track is found by VLC (windows version), but the subtitles are just >> "flashing" : I mean that they seem to appear at the right time, but >> they disappear immediately. >> > > You should transcode the subtitle track (add a transcode{scodec=dvb} at > the beginning of your sout chain...) > >> Is this a known bug of vlc? The problem occurs with both udp streaming >> and streaming to a file. >> >> By the way, do someone know how to multiplex a subtitle track into an >> avi file ? I tried with spumux, but with no success. >> > > AFAIK, avi doesn't support spu tracks. You should remux your file to ogm > or mkv. > > -- > BigBen > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Tue Jan 18 23:28:59 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Tue, 18 Jan 2005 23:28:59 +0100 Subject: [vlc] Re: How can I ? In-Reply-To: References: <20050118182309.50328.qmail@web26105.mail.ukl.yahoo.com> Message-ID: <20050118222859.GA23885@kikal.org> On Tue, Jan 18, 2005, Mark Moriarty wrote : > Vlc has a remote control interface (as well as a Telnet/VLM interface, an > http interface,...) allowing control of VLC over a socket. > Since this rc interface can also read its commands from the console, the easiest (if you can use a UNIX system) to control VLC using a serial link would be to open a console on one of the serial ports of the server, and then log on this console, start a VLC session with the rc interface (or attach to an exiting one) and send commands this way... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From hartman at videolan.org Wed Jan 19 02:05:41 2005 From: hartman at videolan.org (Derk-Jan Hartman) Date: Wed, 19 Jan 2005 02:05:41 +0100 Subject: [vlc] Re: Streaming with subtitle track In-Reply-To: <20050118170347.GA14347@kikal.org> References: <20050118105119.GA13930@fullsix.com> <20050118170347.GA14347@kikal.org> Message-ID: <3D5320B6-69B6-11D9-A60C-0030656CFA88@videolan.org> On 18 jan 2005, at 18:03, Benjamin PRACHT wrote: > On Tue, Jan 18, 2005, Etienne Bernard wrote : >> >> By the way, do someone know how to multiplex a subtitle track into an >> avi file ? I tried with spumux, but with no success. >> > > AFAIK, avi doesn't support spu tracks. You should remux your file to > ogm > or mkv. Though it cannot contain spu tracks, you can 'mux' them into your avi. avimux for instance does this. It's not truly muxing though, it's more like 'attaching the subtitle files inside the container' it's non standard and not really useful either. DJ --- Universiteit Twente Derk-Jan Hartman (d.hartman at student.utwente dot nl) http://home.student.utwente.nl/d.hartman -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Claudio.Cavalera at icn.siemens.it Wed Jan 19 10:51:01 2005 From: Claudio.Cavalera at icn.siemens.it (Cavalera Claudio) Date: Wed, 19 Jan 2005 10:51:01 +0100 Subject: [vlc] AMR Audio Decoding Message-ID: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> Hello, I've read in another ML (live.com devel) that someone is using VLC to play AMR audio. However according to here http://www.videolan.org/vlc/features.html it seems impossible. Am I missing something? WFR, Claudio -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Pedro.Lorente at upc.edu Wed Jan 19 12:36:22 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Wed, 19 Jan 2005 12:36:22 +0100 Subject: [vlc] vlc with Java thread problem In-Reply-To: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> Message-ID: Hi, I'm developing a little interface in Java that it run a thread with vlc command line (Ex: vlc -I rc). At first I try it with the default installation of videolan from debian mirrors of Videolan homepage. I've a little problem when the interface launch the vlc command line, vlc don't launch because it try to run the skins2 interface. After this I recompile videolan with wxwindows disabled, but now vlc continue fail. Anyone know how can I run vlc in a thread enviorment with rc activated? Thanks in advance P.D: Excuse-me for my bad English, I hope that you can understand it. Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 -------------- next part -------------- An HTML attachment was scrubbed... URL: From mfmbusiness at earthlink.net Wed Jan 19 15:32:38 2005 From: mfmbusiness at earthlink.net (Mark Moriarty) Date: Wed, 19 Jan 2005 09:32:38 -0500 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: Message-ID: -I dummy --extraintf rc --rc-host 192.168.2.50:23 (use your IP address and desired port) is probably appropriate syntax on *nix If the PC instead uses Windows, add --rc-quiet _____ From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of Pedro Lorente/UPC Sent: Wednesday, January 19, 2005 6:36 AM To: vlc at videolan.org Subject: [vlc] vlc with Java thread problem Hi, I'm developing a little interface in Java that it run a thread with vlc command line (Ex: vlc -I rc). At first I try it with the default installation of videolan from debian mirrors of Videolan homepage. I've a little problem when the interface launch the vlc command line, vlc don't launch because it try to run the skins2 interface. After this I recompile videolan with wxwindows disabled, but now vlc continue fail. Anyone know how can I run vlc in a thread enviorment with rc activated? Thanks in advance P.D: Excuse-me for my bad English, I hope that you can understand it. Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 -------------- next part -------------- An HTML attachment was scrubbed... URL: From spindler at hbt.arch.ethz.ch Wed Jan 19 15:40:06 2005 From: spindler at hbt.arch.ethz.ch (Torsten Spindler) Date: Wed, 19 Jan 2005 15:40:06 +0100 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: References: Message-ID: <1106145606.3913.17.camel@gasluft.ethz.ch> On Wed, 2005-01-19 at 12:36, Pedro Lorente/UPC wrote: > I'm developing a little interface in Java that it run a > thread with vlc command line (Ex: vlc -I rc). At first I try it with > the default installation of videolan from debian mirrors of Videolan > homepage. > I've a little problem when the interface launch the vlc command line, > vlc don't launch because it try to run the skins2 interface. After > this I recompile videolan with wxwindows disabled, but now vlc > continue fail. > Anyone know how can I run vlc in a thread enviorment with rc > activated? Probably you need to use --rc-fake-tty in additon to -I rc. Bye, Torsten -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From wesley_crusher2349 at hotmail.com Wed Jan 19 16:48:43 2005 From: wesley_crusher2349 at hotmail.com (Wesley Crusher) Date: Wed, 19 Jan 2005 16:48:43 +0100 Subject: [vlc] VLC player anf 75 hertz mode Message-ID: An HTML attachment was scrubbed... URL: From Pedro.Lorente at upc.edu Wed Jan 19 15:31:09 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Wed, 19 Jan 2005 15:31:09 +0100 Subject: [vlc] vlc with Java thread problem In-Reply-To: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> Message-ID: In the other mail I forget to add the output : VLC media player 0.8.1 Janus [00000021] main interface error: no interface module matched "hotkeys,none" [00000021] main interface error: no suitable intf module [00000001] main vlc error: interface "hotkeys,none" initialization failed [00000022] main interface error: no interface module matched "any" [00000022] main interface error: no suitable intf module [00000001] main vlc error: interface "(null)" initialization failed Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 -------------- next part -------------- An HTML attachment was scrubbed... URL: From Pedro.Lorente at upc.edu Wed Jan 19 15:58:26 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Wed, 19 Jan 2005 15:58:26 +0100 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: Message-ID: Thanks but it's fails, I think that the problem can be the execuiton enviorment. Do you know if vlc need any especial enviorment var? Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 "Mark Moriarty" Sent by: vlc-bounce at videolan.org 19/01/2005 15:32 Please respond to vlc To: cc: Subject: [vlc] Re: vlc with Java thread problem -I dummy --extraintf rc --rc-host 192.168.2.50:23 (use your IP address and desired port) is probably appropriate syntax on *nix If the PC instead uses Windows, add --rc-quiet From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of Pedro Lorente/UPC Sent: Wednesday, January 19, 2005 6:36 AM To: vlc at videolan.org Subject: [vlc] vlc with Java thread problem Hi, I'm developing a little interface in Java that it run a thread with vlc command line (Ex: vlc -I rc). At first I try it with the default installation of videolan from debian mirrors of Videolan homepage. I've a little problem when the interface launch the vlc command line, vlc don't launch because it try to run the skins2 interface. After this I recompile videolan with wxwindows disabled, but now vlc continue fail. Anyone know how can I run vlc in a thread enviorment with rc activated? Thanks in advance P.D: Excuse-me for my bad English, I hope that you can understand it. Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bigben+spam at videolan.org Wed Jan 19 22:57:34 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 19 Jan 2005 22:57:34 +0100 Subject: [vlc] Re: AMR Audio Decoding In-Reply-To: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> References: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> Message-ID: <20050119215734.GB23885@kikal.org> On Wed, Jan 19, 2005, Cavalera Claudio wrote : > Hello, > I've read in another ML (live.com devel) that someone is using VLC to > play AMR audio. > However according to here http://www.videolan.org/vlc/features.html it > seems impossible. > Am I missing something? > Well, this feature page isn't totally up to date anyway, but I don't think latest versions of VLC have built in supportfor AMR (somebody corrects me). You'll need to compile a binary yourself, with an AMR enabled version of the ffmpeg library... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From daniele.pagliani at seac02.it Thu Jan 20 10:20:57 2005 From: daniele.pagliani at seac02.it (daniele.pagliani at seac02.it) Date: Thu, 20 Jan 2005 10:20:57 +0100 Subject: [vlc] blue screen Message-ID: <1106212857.41ef77f99843f@service.kinetikon.com> Hi everyone, yesterday I had a problem with vlc. I launched vlc in order to show a stream video and it was ok, than I stopped and restarted it several times without problems until it shown a blue screen and I wasn't able to visualize the output fine without restart the system. Before rebooting I try if the streaming was good, and it was because from another workstation I was able to show it. I try to stream 16:9 and 4:3 stream and the blue area was in the field of the video. It seemed it was able to render frames. Ay idea what appened? There is a solution to obtain the right behaviour of vlc without rebooting the system? Thanks Daniele -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From casek at m33access.com Wed Jan 19 22:16:44 2005 From: casek at m33access.com (Kathy Case) Date: Wed, 19 Jan 2005 16:16:44 -0500 Subject: [vlc] Message-ID: <6BADB786-6A5F-11D9-A792-0003937CD966@m33access.com> Hi, Does VLC play videos in with .wmv in their title? I can hear the audio but do not get video. I have a Mac operating with 10.2.8. Thanks you, Kathy Kathleen Case Teacher Consultant for Autism Spectrum Disorder C.O.O.R. Intermediate School District Box 827 Roscommon, MI 48653 989-275-9583 -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jm at thetabletstore.de Wed Jan 19 22:54:35 2005 From: jm at thetabletstore.de (=?iso-8859-1?B?SvZyZyBN9nJrZQ==?=) Date: Wed, 19 Jan 2005 22:54:35 +0100 Subject: [vlc] vlc and tablet pc Message-ID: Hi, I`m using different models of Tablet PCs. Everytime I switch the display mode it causes a total freeze of WinXP. Using VLC in the upside-down mode I only get a flashing picture. Maybe you `re interested in this information to follow and find out how to fix it. If you need any further information, do not hasitate to contact me. Good luck and a big Thanx to all of you. Kind regards J?rg M?rke Gesch?ftsf?hrer The Tablet Store GmbH i. G. Schellingstrasse 35 80779 M?nchen Fon: +49 89 552 999 37 Fax: +49 30 484 98 78 22 www.thetabletstore.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2563 bytes Desc: not available URL: From zhangl at yztech.com.cn Thu Jan 20 10:55:56 2005 From: zhangl at yztech.com.cn (lmzhang) Date: Thu, 20 Jan 2005 17:55:56 +0800 Subject: [vlc] HOW can I save audio stream and video stream by using streaming out ...!!?? Message-ID: <1106214956.7954.17.camel@localhost.localdomain> HI , Thanks for your reading .. I am runing VLC 0.8.1 version on my debian linux system . providing a rtsp streaming source , such as , rtsp://192.168.0.1:7070 , it streaming out MPEG 4 video and G729 audio data. now , I can run vlc in GUI mode to select "open network streaming" -> "network" ->rtsp then choose "stream out" . I choose "file" in "output method of "stream out" tab . then , I found I can play locally and replay saved file ,but I can only save the video data ,the G729 audio stream was missing ?? why?? any ieda is welcome!! thanks!! -- lmzhang -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Thu Jan 20 12:30:28 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Thu, 20 Jan 2005 06:30:28 -0500 Subject: [vlc] Assembler help Message-ID: <20050120113038.54586B69F@krishna.via.ecp.fr> I am trying to get the deinterlace module and the a52 library to compile using MMX. I am using Microsoft Visual C++. I am not much of an assembler programmer. Could someone show me how to convert the GNU style inline assembly to something that will work with Microsoft assembler? static void MergeMMX( void *_p_dest, const void *_p_s1, const void *_p_s2, size_t i_bytes ) { uint8_t* p_dest = (uint8_t*)_p_dest; const uint8_t *p_s1 = (const uint8_t *)_p_s1; const uint8_t *p_s2 = (const uint8_t *)_p_s2; uint8_t* p_end = p_dest + i_bytes - 8; while( p_dest < p_end ) { #ifndef UNDER_CE // Not Microsoft inline __asm__ __volatile__( "movq %2,%%mm1;" "pavgb %1, %%mm1;" "movq %%mm1, %0" :"=m" (*p_dest): "m" (*p_s1), "m" (*p_s2) ); #else // Microsoft Inline /* The pavgb doesn't work */ __asm { movq p_s2, mm1 pavgb p_s1, mm1 movq mm1, p_dest } #endif p_dest += 8; p_s1 += 8; p_s2 += 8; } p_end += 8; while( p_dest < p_end ) { *p_dest++ = ( (uint16_t)(*p_s1++) + (uint16_t)(*p_s2++) ) >> 1; } } #endif static int a52_resample_STEREO_to_2_MMX(float * _f, int16_t * s16){ int32_t * f = (int32_t *) _f; /* benchmark scores are 0.3% better with SSE but we would need to set bias=0 and premultiply it #ifdef HAVE_SSE asm volatile( "movl $-1024, %%esi \n\t" "1: \n\t" "cvtps2pi (%1, %%esi), %%mm0 \n\t" "cvtps2pi 1024(%1, %%esi), %%mm2\n\t" "movq %%mm0, %%mm1 \n\t" "punpcklwd %%mm2, %%mm0 \n\t" "punpckhwd %%mm2, %%mm1 \n\t" "movq %%mm0, (%0, %%esi) \n\t" "movq %%mm1, 8(%0, %%esi) \n\t" "addl $16, %%esi \n\t" " jnz 1b \n\t" "emms \n\t" :: "r" (s16+512), "r" (f+256) :"%esi", "memory" );*/ asm volatile( "movl $-1024, %%esi \n\t" "movq "MANGLE(magicF2W)", %%mm7 \n\t" "1: \n\t" "movq (%1, %%esi), %%mm0 \n\t" "movq 8(%1, %%esi), %%mm1 \n\t" "movq 1024(%1, %%esi), %%mm2 \n\t" "movq 1032(%1, %%esi), %%mm3 \n\t" "psubd %%mm7, %%mm0 \n\t" "psubd %%mm7, %%mm1 \n\t" "psubd %%mm7, %%mm2 \n\t" "psubd %%mm7, %%mm3 \n\t" "packssdw %%mm1, %%mm0 \n\t" "packssdw %%mm3, %%mm2 \n\t" "movq %%mm0, %%mm1 \n\t" "punpcklwd %%mm2, %%mm0 \n\t" "punpckhwd %%mm2, %%mm1 \n\t" "movq %%mm0, (%0, %%esi) \n\t" "movq %%mm1, 8(%0, %%esi) \n\t" "addl $16, %%esi \n\t" " jnz 1b \n\t" "emms \n\t" :: "r" (s16+512), "r" (f+256) :"%esi", "memory" ); return 2*256; } Thanks in advance, -- Rick Davis -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From MTry at lbusd.k12.ca.us Wed Jan 19 19:00:43 2005 From: MTry at lbusd.k12.ca.us (Manydeth Try) Date: Wed, 19 Jan 2005 10:00:43 -0800 Subject: [vlc] VLC Shuts my Computer Down Message-ID: I have a problem, and I cna't find a solution to it. My operating system is Win XP. Pentium 4 512 RAM I recently installed VLC Player 0.8.1 onto my desktop. I did this to my Win XP Laptop and it works great. But when I installed it into my desktop, it didn't work. The problem occurs exactly like this: Once installed I open/run the VLC Player. The file I use to view is an AVI file. The VLC lo0ads the file, then after about 10 seconds of seeing the file, my computer shuts down and restarts. Happens everytime I play any file with VLC, whether it is AVI of mpeg, or etc. Once the Desktop restarts, I get the error mesaage saying that the Computer just recovered from a serious error. the erroe message report details that they are sending the error report with information from my Temp file in my Documents~1/Users/Local~1/temp.....etc. How do I trouble shoot this? It is frustrating. Please help. Thank You Manydeth Try -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From kurtyaaron at yahoo.com Wed Jan 19 19:32:28 2005 From: kurtyaaron at yahoo.com (Kurt Walter) Date: Wed, 19 Jan 2005 10:32:28 -0800 (PST) Subject: [vlc] help Message-ID: <20050119183228.53115.qmail@web53310.mail.yahoo.com> I just purchased your service..plugged in what I needed, but i can't seem to get in to the movies.... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From martinyeh at psu.edu Thu Jan 20 02:30:01 2005 From: martinyeh at psu.edu (Martin Yeh) Date: Wed, 19 Jan 2005 20:30:01 -0500 Subject: [vlc] VLC on Zaurus SL6000 report Message-ID: <41EF0999.40401@psu.edu> Hi there, I was trying to install VLC media player on my Zaurus SL6000. During the installation, libffmpeg showed uninstalled even though I installed it without any problem and it also showed up in uninstall packages. After all 4 packages were installed, there is no icon. If I open a terminal and type vlc, then I got libsdl is missing. Regards, Martin -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mk at lenten.com Thu Jan 20 10:59:17 2005 From: mk at lenten.com (Michael) Date: Thu, 20 Jan 2005 17:59:17 +0800 Subject: [vlc] Asking for help about VLC Message-ID: <009b01c4fed6$b8d96d50$0c01a8c0@MichaelPC> Hi Derk-Jan Hartman, My name is Mr. Michael KUO, and I am a developer for a company with system recovery software related. I learned your VLC media player and experienced it, however, my engineering background is with VC language. My purpose is to integrate some functions of your VLC to our program. I have no way to go further coding based on your open source file because of I don't know how to use with your complier. Do you have the EXE file, or in DLL file as to be called by our program? We need broadcasting machine programs and the receiving machines by separate or in one will be fine to me. Windows is the only OS platform I need only. Please advise. Thanks. BR, Michael KUO 20.01.05 -------------- next part -------------- An HTML attachment was scrubbed... URL: From kz365 at hszk.bme.hu Thu Jan 20 12:43:53 2005 From: kz365 at hszk.bme.hu (=?iso-8859-2?Q?Kov=E1csh=E1zi_zsolt?=) Date: Thu, 20 Jan 2005 12:43:53 +0100 Subject: [vlc] VLC playlist question Message-ID: <000601c4fee5$516fbde0$e3f44298@viper> Hi! I would like to know if there is some way from the command line to change an already running vlc session. I would like to change to another playlist item. Also can I stop or pause a running vlc from the command line?? Thanx for your answers Zsolt -------------- next part -------------- An HTML attachment was scrubbed... URL: From Pedro.Lorente at upc.edu Thu Jan 20 12:53:44 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Thu, 20 Jan 2005 12:53:44 +0100 Subject: [vlc] vlc with Java thread problem In-Reply-To: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> Message-ID: The problem continues. I use this command line : /usr/bin/vlc -I dummy --extraintf rc --rc-host 127.0.0.1:9999. If I put these line into a shell it's works fine, but when I use the java code I get this error: VLC media player 0.8.1 Janus libhal.c 767 : org.freedesktop.DBus.Error.ServiceDoesNotExist raised "Service "org.freedesktop.Hal" does not exist" [00000232] main interface error: no suitable intf module [00000001] main vlc error: interface "rc,none" initialization failed [00000234] dummy interface: Using the dummy interface module... Anybody know why I couldn't initialize the rc interface? This is my java code: Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: HiloEjecucion.java Type: application/octet-stream Size: 2324 bytes Desc: not available URL: From mfmbusiness at earthlink.net Thu Jan 20 14:21:25 2005 From: mfmbusiness at earthlink.net (Mark Moriarty) Date: Thu, 20 Jan 2005 08:21:25 -0500 Subject: [vlc] Re: VLC Shuts my Computer Down In-Reply-To: Message-ID: Common problems: -Latest service packs -Latest video driver SW for your graphics card or chip -Latest DirectX (you normally want to check for the very latest things) -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of Manydeth Try Sent: Wednesday, January 19, 2005 1:01 PM To: vlc at videolan.org Subject: [vlc] VLC Shuts my Computer Down I have a problem, and I cna't find a solution to it. My operating system is Win XP. Pentium 4 512 RAM I recently installed VLC Player 0.8.1 onto my desktop. I did this to my Win XP Laptop and it works great. But when I installed it into my desktop, it didn't work. The problem occurs exactly like this: Once installed I open/run the VLC Player. The file I use to view is an AVI file. The VLC lo0ads the file, then after about 10 seconds of seeing the file, my computer shuts down and restarts. Happens everytime I play any file with VLC, whether it is AVI of mpeg, or etc. Once the Desktop restarts, I get the error mesaage saying that the Computer just recovered from a serious error. the erroe message report details that they are sending the error report with information from my Temp file in my Documents~1/Users/Local~1/temp.....etc. How do I trouble shoot this? It is frustrating. Please help. Thank You Manydeth Try -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jussi.laukkanen at utu.fi Thu Jan 20 14:24:35 2005 From: jussi.laukkanen at utu.fi (Jussi Laukkanen) Date: Thu, 20 Jan 2005 15:24:35 +0200 Subject: [vlc] Re: VLC on Zaurus SL6000 report In-Reply-To: <41EF0999.40401@psu.edu> References: <41EF0999.40401@psu.edu> Message-ID: <200501201524.35162.jussi.laukkanen@utu.fi> On Thursday 20 January 2005 03:30, Martin Yeh wrote: > Hi there, > > I was trying to install VLC media player on my Zaurus SL6000. During > the installation, libffmpeg showed uninstalled even though I installed > it without any problem and it also showed up in uninstall packages. > After all 4 packages were installed, there is no icon. If I open a > terminal and type vlc, then I got libsdl is missing. You should try using the SDL package from http://www.gnurou.org/software/zaurus/ Works for me. - Jussi -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From courmisch at via.ecp.fr Thu Jan 20 14:30:15 2005 From: courmisch at via.ecp.fr (=?iso-8859-1?q?R=E9mi_Denis-Courmont?=) Date: Thu, 20 Jan 2005 14:30:15 +0100 Subject: [vlc] Re: help In-Reply-To: <20050119183228.53115.qmail@web53310.mail.yahoo.com> References: <20050119183228.53115.qmail@web53310.mail.yahoo.com> Message-ID: <200501201430.16043.courmisch@via.ecp.fr> Hello, Le Mercredi 19 Janvier 2005 19:32, Kurt Walter a ?crit : > I just purchased your service..plugged in what I > needed, but i can't seem to get in to the movies.... You can't have purchased our service for we only provide it free of charge from our official website http://www.videolan.org/ Could you give us more informations on what you purchased and from where? Sincerely, -- R?mi Denis-Courmont http://www.simphalempin.com/home/ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From bigben+spam at videolan.org Thu Jan 20 18:22:34 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 20 Jan 2005 18:22:34 +0100 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: References: <9F883E3916B78C4CBB80AF6FC5220153351E20@cingl08a.icn.siemens.it> Message-ID: <20050120172234.GA23923@kikal.org> On Thu, Jan 20, 2005, Pedro Lorente/UPC wrote : > The problem continues. I use this command line : /usr/bin/vlc -I dummy > --extraintf rc --rc-host 127.0.0.1:9999. If I put these line into a > shell it's works fine, but when I use the java code I get this error: > > VLC media player 0.8.1 Janus > libhal.c 767 : org.freedesktop.DBus.Error.ServiceDoesNotExist raised > "Service "org.freedesktop.Hal" does not exist" Well, consider that as a wrning, not an error... It is only required for the HAL service discovery module. > > [00000232] main interface error: no suitable intf module > [00000001] main vlc error: interface "rc,none" initialization failed > [00000234] dummy interface: Using the dummy interface module... > I guess VLC doesn't find the plugin path when started that way (certainly an environment issue...) Can you try with the --plugin-path /usr/src/vlc option ? (if /usr/src/vlc is the path where the modules are installed). > Anybody know why I couldn't initialize the rc interface? > -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Thu Jan 20 18:25:29 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 20 Jan 2005 18:25:29 +0100 Subject: [vlc] Re: [vlc] In-Reply-To: <6BADB786-6A5F-11D9-A792-0003937CD966@m33access.com> References: <6BADB786-6A5F-11D9-A792-0003937CD966@m33access.com> Message-ID: <20050120172529.GB23923@kikal.org> On Wed, Jan 19, 2005, Kathy Case wrote : > Hi, > > Does VLC play videos in with .wmv in their title? I can hear the audio > but do not get video. > I have a Mac operating with 10.2.8. > Your file certainly includes a WMV3 video track. VLC cannot read the format as there isn't any free opensource decoder for it (Microsoft keeps its specifications closed). You should get a popup displaying an error about an unsupported FOURCC, if it is the problem... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Thu Jan 20 18:31:28 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 20 Jan 2005 18:31:28 +0100 Subject: [vlc] Re: HOW can I save audio stream and video stream by using streaming out ...!!?? In-Reply-To: <1106214956.7954.17.camel@localhost.localdomain> References: <1106214956.7954.17.camel@localhost.localdomain> Message-ID: <20050120173128.GC23923@kikal.org> On Thu, Jan 20, 2005, lmzhang wrote : > HI , > > Thanks for your reading .. > > I am runing VLC 0.8.1 version on my debian linux system . > > providing a rtsp streaming source , such as , > rtsp://192.168.0.1:7070 , it streaming out MPEG 4 video and G729 audio > data. > > now , I can run vlc in GUI mode to select > "open network streaming" -> "network" ->rtsp then choose "stream out" . > > I choose "file" in "output method of "stream out" tab . > > then , I found I can play locally and replay saved file ,but I can > only save the video data ,the G729 audio stream was missing ?? why?? > Strange... Have a look at the warning/error messages in the view->preferences panel. This could be related to the fact the encapsulation method you chose is incompatible with G729. I don't know if this codec is supported by any of the muxing methods VLC supports (you may want to try all of them... ;-) Can you also try to enable the "Enable Streaming of all ES" option in thje preferences, stream output tab, advanced options. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Thu Jan 20 18:33:56 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 20 Jan 2005 18:33:56 +0100 Subject: [vlc] Re: VLC playlist question In-Reply-To: <000601c4fee5$516fbde0$e3f44298@viper> References: <000601c4fee5$516fbde0$e3f44298@viper> Message-ID: <20050120173356.GD23923@kikal.org> On Thu, Jan 20, 2005, Kov?csh?zi zsolt wrote : > Hi! > > I would like to know if there is some way from the command line to change an already running vlc session. I would like to change to another playlist item. Also can I stop or pause a running vlc from the command line?? > > Thanx for your answers You should have a look at the rc interface. modifying a playlist item could require some further coding howevr (AFAIK, you can add and remove an item, not change it from this interface) -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From conundrums at gmail.com Thu Jan 20 20:00:08 2005 From: conundrums at gmail.com (Hussain) Date: Thu, 20 Jan 2005 20:00:08 +0100 Subject: [vlc] h264.c code in modules/packetizer/ In-Reply-To: <20050120173356.GD23923@kikal.org> References: <000601c4fee5$516fbde0$e3f44298@viper> <20050120173356.GD23923@kikal.org> Message-ID: <9466e64305012011006d404bb9@mail.gmail.com> Hello. I have a few questions about the h264.c code in the modules/packetizer/ directory. 1. Is this code creating an Annex B byte stream, before passing it on to the ffpmeg decoder when one plays a h264 encoded video, contained in an .mp4 container for example. If not could you please tell me what it does. 2. If I needed to pass a streamed obtained via rtp/rtsp to this code, what would be the best way to do so. I am assuming that i) the h264.c code does create the Annex B stream before passing it to ffmpeg, as ii) ffmpeg can only decode Annex B h264 streams. So I'd like to reuse this code if possible :). In other words what changes would I need to make in livedotcom.cpp code so that the stream I receive is first parsed by the h264.c code and then to the ffmpeg decoder. And oh by Annex B, I am referring byte stream format defined in Annex B of the specification. Thanks for the help. Hussain -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dusan.mudric at rogers.com Fri Jan 21 02:56:59 2005 From: dusan.mudric at rogers.com (Dusan Mudric) Date: Thu, 20 Jan 2005 20:56:59 -0500 Subject: [vlc] ffmpeg with VLC + play YUV References: <1106212857.41ef77f99843f@service.kinetikon.com> Message-ID: <000001c4ff5e$6996dd80$e4369d18@o9d2y8> Hi, I am a sessional lecturer at Carleton University and my students are implementing various encoding algorithms on VLC platform. We need a help to: - compile ffpemg library with VLC, and - run VLC using YUV video clips. Would anybody out there be able to help? Thanks, Dusan Mudric. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From zhangl at yztech.com.cn Fri Jan 21 07:21:50 2005 From: zhangl at yztech.com.cn (lmzhang) Date: Fri, 21 Jan 2005 14:21:50 +0800 Subject: [vlc] Re: HOW can I save audio stream and video stream by using streaming out ...!!?? In-Reply-To: <20050120173128.GC23923@kikal.org> References: <1106214956.7954.17.camel@localhost.localdomain> <20050120173128.GC23923@kikal.org> Message-ID: <1106288510.7954.62.camel@localhost.localdomain> thanks! I try all encapsulation method ,ASF , MPEG ..., but no one can do..:(. finally , I try audio transcode to translate g729 to a51 ,oh , it can work , though It hurt the performance!! thanks all the same !! but , but ,,, will VLC support g729 in its encapsulation method in later versions ?? ? 2005-01-20?? 18:31 +0100?Benjamin PRACHT??? > On Thu, Jan 20, 2005, lmzhang wrote : > > HI , > > > > Thanks for your reading .. > > > > I am runing VLC 0.8.1 version on my debian linux system . > > > > providing a rtsp streaming source , such as , > > rtsp://192.168.0.1:7070 , it streaming out MPEG 4 video and G729 audio > > data. > > > > now , I can run vlc in GUI mode to select > > "open network streaming" -> "network" ->rtsp then choose "stream out" . > > > > I choose "file" in "output method of "stream out" tab . > > > > then , I found I can play locally and replay saved file ,but I can > > only save the video data ,the G729 audio stream was missing ?? why?? > > > > Strange... Have a look at the warning/error messages in > the view->preferences panel. This could be related to the fact the > encapsulation method you chose is incompatible with G729. I don't know > if this codec is supported by any of the muxing methods VLC supports > (you may want to try all of them... ;-) Can you also try to enable the > "Enable Streaming of all ES" option in thje preferences, stream output > tab, advanced options. > > -- > BigBen > -- lmzhang -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dermot at dspsrv.com Fri Jan 21 11:14:46 2005 From: dermot at dspsrv.com (Dermot McGahon) Date: Fri, 21 Jan 2005 10:14:46 -0000 Subject: [vlc] Re: VLC playlist question In-Reply-To: <20050120173356.GD23923@kikal.org> References: <000601c4fee5$516fbde0$e3f44298@viper> <20050120173356.GD23923@kikal.org> Message-ID: On Thu, 20 Jan 2005 18:33:56 +0100, Benjamin PRACHT wrote: > On Thu, Jan 20, 2005, Kov?csh?zi zsolt wrote : >> Hi! >> >> I would like to know if there is some way from the command line to >> change an already running vlc session. I would like to change to >> another playlist item. Also can I stop or pause a running vlc from the >> command line?? >> >> Thanx for your answers > > You should have a look at the rc interface. modifying a playlist item > could require some further coding howevr (AFAIK, you can add and remove > an item, not change it from this interface) I send a patch to the devel list a couple of days ago which implements goto for the rc interface. I think this is what he is looking for. Dermot. -- -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From afonso_neto2004 at yahoo.com.br Fri Jan 21 18:35:38 2005 From: afonso_neto2004 at yahoo.com.br (Afonso Lima) Date: Fri, 21 Jan 2005 14:35:38 -0300 (ART) Subject: [vlc] Questions about VLC using two channels at the same time Message-ID: <20050121173538.45603.qmail@web53908.mail.yahoo.com> Dear Team, I?m trying to use VLC under LINUX (mandrake 10.1) but there is something not working ok. When I call VLC to show the images from only one channel(input) from my video capture card it works ok. But when I call VLC to show the imagens from two channels, it show in the two windows opened only the imagens from the last channel opened. Should I make some call to different memory address? Do you have some help to give me? Thanks. Afonso Lima. --------------------------------- Yahoo! Acesso Gr?tis - Internet r?pida e gr?tis. Instale o discador do Yahoo! agora. -------------- next part -------------- An HTML attachment was scrubbed... URL: From courmisch at via.ecp.fr Fri Jan 21 22:14:57 2005 From: courmisch at via.ecp.fr (=?utf-8?q?R=C3=A9mi_Denis-Courmont?=) Date: Fri, 21 Jan 2005 22:14:57 +0100 Subject: [vlc] Re: Asking for help about VLC In-Reply-To: <009b01c4fed6$b8d96d50$0c01a8c0@MichaelPC> References: <009b01c4fed6$b8d96d50$0c01a8c0@MichaelPC> Message-ID: <200501212214.58020.courmisch@via.ecp.fr> Hello, Le Jeudi 20 Janvier 2005 10:59, Michael a ?crit : > I have no way to go further coding based on your open > source file because of I don't know how to use with your complier. There is detailled help on building VLC for Windows in the INSTALL.win32. It is not really possible to use Visual Studio. > Do you have the EXE file, or in DLL file as to be called by our > program? It could technically be done, but it would imply that the program calling the DLL be distributed under the GNU GPL, unless it is only used internally. Otherwise, vlc.exe supports an extensive range of command line options so that it can be controlled from an external program. It is probably the only legal way to use the VLC from non-GPL software. You can refer to the documentation on our website for the command line syntax. -- R?mi Denis-Courmont http://www.simphalempin.com/home/ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From bigben+spam at videolan.org Sat Jan 22 09:56:05 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sat, 22 Jan 2005 09:56:05 +0100 Subject: [vlc] Re: Questions about VLC using two channels at the same time In-Reply-To: <20050121173538.45603.qmail@web53908.mail.yahoo.com> References: <20050121173538.45603.qmail@web53908.mail.yahoo.com> Message-ID: <20050122085605.GA25288@kikal.org> On Fri, Jan 21, 2005, Afonso Lima wrote : > Dear Team, > > I?m trying to use VLC under LINUX (mandrake 10.1) but there is something not working ok. When I call VLC to show the images from only one channel(input) from my video capture card it works ok. But when I call VLC to show the imagens from two channels, it show in the two windows opened only the imagens from the last channel opened. > Should I make some call to different memory address? > Do you have some help to give me? > What command are you using exactly ? I'm not sure VLC has already been tryed with a V4L card able to output 2 channels at the same time... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From afonso_neto2004 at yahoo.com.br Sat Jan 22 13:10:13 2005 From: afonso_neto2004 at yahoo.com.br (Afonso Lima) Date: Sat, 22 Jan 2005 09:10:13 -0300 (ART) Subject: [vlc] Re: Questions about VLC using two channels at the same time In-Reply-To: <20050122085605.GA25288@kikal.org> Message-ID: <20050122121013.57270.qmail@web53905.mail.yahoo.com> Hi BigBen, I'm openning two linux terminals and in each one writing the command from videolan documentation, and only changing the number of channel on each terminal. You've said VLC cannot open two channels from the same card at the same time. Is it true? How can I fix it? Have you ever experimented something like this? Its not interesting for me use two cards to view only 2 cameras. Thanks. Afonso Lima. Benjamin PRACHT wrote: On Fri, Jan 21, 2005, Afonso Lima wrote : > Dear Team, > > I?m trying to use VLC under LINUX (mandrake 10.1) but there is something not working ok. When I call VLC to show the images from only one channel(input) from my video capture card it works ok. But when I call VLC to show the imagens from two channels, it show in the two windows opened only the imagens from the last channel opened. > Should I make some call to different memory address? > Do you have some help to give me? > What command are you using exactly ? I'm not sure VLC has already been tryed with a V4L card able to output 2 channels at the same time... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html --------------------------------- Yahoo! Acesso Gr?tis - Internet r?pida e gr?tis. Instale o discador do Yahoo! agora. -------------- next part -------------- An HTML attachment was scrubbed... URL: From bigben+spam at videolan.org Sat Jan 22 13:18:45 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sat, 22 Jan 2005 13:18:45 +0100 Subject: [vlc] Re: Questions about VLC using two channels at the same time In-Reply-To: <20050122121013.57270.qmail@web53905.mail.yahoo.com> References: <20050122085605.GA25288@kikal.org> <20050122121013.57270.qmail@web53905.mail.yahoo.com> Message-ID: <20050122121845.GA13435@kikal.org> On Sat, Jan 22, 2005, Afonso Lima wrote : > Hi BigBen, > > I'm openning two linux terminals and in each one writing the command from videolan documentation, and only changing the number of channel on each terminal. > You've said VLC cannot open two channels from the same card at the same time. Is it true? How can I fix it? Have you ever experimented something like this? > Its not interesting for me use two cards to view only 2 cameras. > Well, does your card allow grabbing from the 2 sources at the same time, or are there exclusive ? (In the cases of cards with a Composite an a S-Video Input, that is often the latter...). I'm not familiar with V4L at all, but I guess There should be a different /dev/videoX device for each of the capture devices if grabbing 2 streams is possible. Please also be aware that VLC currently only has support for V4L1, not V4L2. If the ability to grap 2 streams at the same time from one single card depends of the V4L2 compatibility, there might be an issue. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From afonso_neto2004 at yahoo.com.br Sat Jan 22 13:21:35 2005 From: afonso_neto2004 at yahoo.com.br (Afonso Lima) Date: Sat, 22 Jan 2005 09:21:35 -0300 (ART) Subject: [vlc] Re: Questions about VLC using two channels at the same time In-Reply-To: <20050122121845.GA13435@kikal.org> Message-ID: <20050122122135.82309.qmail@web53903.mail.yahoo.com> Thanks for the tip BigBen, Now I'll see the V4L2 documentation. I'll tell you something on monday. Afonso. Benjamin PRACHT wrote: On Sat, Jan 22, 2005, Afonso Lima wrote : > Hi BigBen, > > I'm openning two linux terminals and in each one writing the command from videolan documentation, and only changing the number of channel on each terminal. > You've said VLC cannot open two channels from the same card at the same time. Is it true? How can I fix it? Have you ever experimented something like this? > Its not interesting for me use two cards to view only 2 cameras. > Well, does your card allow grabbing from the 2 sources at the same time, or are there exclusive ? (In the cases of cards with a Composite an a S-Video Input, that is often the latter...). I'm not familiar with V4L at all, but I guess There should be a different /dev/videoX device for each of the capture devices if grabbing 2 streams is possible. Please also be aware that VLC currently only has support for V4L1, not V4L2. If the ability to grap 2 streams at the same time from one single card depends of the V4L2 compatibility, there might be an issue. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html __________________________________________________ Converse com seus amigos em tempo real com o Yahoo! Messenger http://br.download.yahoo.com/messenger/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rickdavisjr at comcast.net Sat Jan 22 05:07:20 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Fri, 21 Jan 2005 23:07:20 -0500 Subject: [vlc] How does it work. Message-ID: <20050122040716.DCF08B4D8@krishna.via.ecp.fr> I am trying to find a leak in audio buffers allocated by fileters.c. The aout_FiltersPlay function is allocating buffers each time it is called. For some reason, some of the buffers aren't being freed. How does audio flow through thought VLC and who should be freeing these buffers? How many filter buffers should be in the queue at any time? I have seen as many as 31 and as few as four. I would have thought the data would eventually be copied to the mixer output buffer and the filter buffers freed. When VLC exits, all buffers are freed. Thanks, Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From sally.noyes at bigpond.com Sat Jan 22 01:36:45 2005 From: sally.noyes at bigpond.com (sally) Date: Sat, 22 Jan 2005 11:36:45 +1100 Subject: [vlc] mirror location Message-ID: <000601c5001a$73a68610$0100000a@your1695c3d4b4> Hello, I am very new to all of this so please be patient. I am having a problem playing avi files on my computer, while reading the posts in the limewire forum I came across a recommedation for VLC. I am located in Australia and was wondering which mirror would be the best one for me to use. Sorry to trouble you, but I really want to make sure I get this right. Thanks for your time. I look forward to hearing from you. cheers Sally -------------- next part -------------- An HTML attachment was scrubbed... URL: From wisnuauw at gmx.de Sat Jan 22 14:12:00 2005 From: wisnuauw at gmx.de (wisnu putera) Date: Sat, 22 Jan 2005 14:12:00 +0100 (MET) Subject: [vlc] Screensaver problem Message-ID: <9506.1106399520@www65.gmx.net> Hallo.. My name is Wisnu, I recently downloaded the newest version of VLC Media Player, but everytime I used it to play movies, my screensaver was activated. But I don't see any option that can disactivated it. Please help, because I'd like to keep using VLC. Thank you Wisnu M. Putera -- GMX im TV ... Die Gedanken sind frei ... Schon gesehen? Jetzt Spot online ansehen: http://www.gmx.net/de/go/tv-spot -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dionoea at via.ecp.fr Sat Jan 22 19:02:51 2005 From: dionoea at via.ecp.fr (Antoine Cellerier) Date: Sat, 22 Jan 2005 19:02:51 +0100 Subject: [vlc] Re: mirror location In-Reply-To: <000601c5001a$73a68610$0100000a@your1695c3d4b4> References: <000601c5001a$73a68610$0100000a@your1695c3d4b4> Message-ID: <20050122180251.GA31312@via.ecp.fr> Hello, On Sat, Jan 22, 2005, sally wrote: > I am very new to all of this so please be patient. I am having a problem > playing avi files on my computer, while reading the posts in the limewire > forum I came across a recommedation for VLC. I am located in Australia and > was wondering which mirror would be the best one for me to use. Sorry to > trouble you, but I really want to make sure I get this right. Thanks for > your time. I look forward to hearing from you. The files available for download on all the mirrors are exact copies of oneantother. Just chose the mirror closest to you for higher download speeds. Regards, -- dionoea -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dionoea at via.ecp.fr Sat Jan 22 19:05:47 2005 From: dionoea at via.ecp.fr (Antoine Cellerier) Date: Sat, 22 Jan 2005 19:05:47 +0100 Subject: [vlc] Re: Screensaver problem In-Reply-To: <9506.1106399520@www65.gmx.net> References: <9506.1106399520@www65.gmx.net> Message-ID: <20050122180547.GB31312@via.ecp.fr> Hello, On Sat, Jan 22, 2005, wisnu putera wrote: > My name is Wisnu, I recently downloaded the newest version of VLC Media > Player, but everytime I used it to play movies, my screensaver was > activated. To disable the screen saver : go in the preferences menu, in General Setting, Interface, Extra interface modules : type "screensaver" (without the quotes. If you already have something specified in extra interface modules, just append screensaver by using a ','). Save the preferences and restart VLC. Regards, -- dionoea -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Sat Jan 22 19:07:03 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Sat, 22 Jan 2005 19:07:03 +0100 Subject: [vlc] Re: mirror location In-Reply-To: <000601c5001a$73a68610$0100000a@your1695c3d4b4> References: <000601c5001a$73a68610$0100000a@your1695c3d4b4> Message-ID: <20050122180703.GA4854@kikal.org> On Sat, Jan 22, 2005, sally wrote : > Hello, > I am very new to all of this so please be patient. I am having a problem playing avi files on my computer, while reading the posts in the limewire forum I came across a recommedation for VLC. I am located in Australia and was wondering which mirror would be the best one for me to use. Sorry to trouble you, but I really want to make sure I get this right. Thanks for your time. I look forward to hearing from you. > Well, that depends on how your ISP's backbone is connected to the rest of the world ;). BTW, files are the same on each of the mirrors, so just try and take the one that is the fastest for you (Anyway, it probably won't make such a difference). -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Sat Jan 22 21:02:16 2005 From: gbazin at altern.org (Gildas Bazin) Date: Sat, 22 Jan 2005 20:02:16 +0000 Subject: [vlc] Re: Screensaver problem In-Reply-To: <20050122180547.GB31312@via.ecp.fr> References: <9506.1106399520@www65.gmx.net> <20050122180547.GB31312@via.ecp.fr> Message-ID: <200501222002.17215.gbazin@altern.org> On Saturday 22 January 2005 18:05, Antoine Cellerier wrote: > Hello, > > On Sat, Jan 22, 2005, wisnu putera wrote: > > My name is Wisnu, I recently downloaded the newest version of VLC Media > > Player, but everytime I used it to play movies, my screensaver was > > activated. > > To disable the screen saver : > go in the preferences menu, > in General Setting, Interface, Extra interface modules : type > "screensaver" (without the quotes. If you already have something > specified in extra interface modules, just append screensaver by using > a ','). > Save the preferences and restart VLC. > This will only work on Linux. If you are using Windows, then the only solution right now would be to use a build of the development version (in which the issue is fixed). See http://www.videolan.org/~videolan/ -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Sun Jan 23 22:30:30 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Sun, 23 Jan 2005 22:30:30 +0100 Subject: [vlc] Problem playing MPEG-PS files with mpeg4video Message-ID: <41F41776.3040606@tiscali.it> Hi, I wrote a new mpeg muxer for mencoder that, among the other things, can mux mpeg4video in mpeg-ps. Playing back these files with vlc I observed a problem (that happen both with and without b-frames): when some frame doesn't have a timestamp (because very small b-frames prevent next p-frames that begin in the same pack to have one) vlc seems to rewind. It seems as if vlc didn't interpolate missing timestamps from the timing values in the video bitstream. If needed I can upload some samples that exhibit these problem, but where? Thanks, Nico -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Mon Jan 24 11:34:20 2005 From: gbazin at altern.org (Gildas Bazin) Date: Mon, 24 Jan 2005 10:34:20 +0000 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <41F41776.3040606@tiscali.it> References: <41F41776.3040606@tiscali.it> Message-ID: <200501241034.20917.gbazin@altern.org> On Sunday 23 January 2005 21:30, Nico Sabbi wrote: > Hi, > I wrote a new mpeg muxer for mencoder that, among the other things, can > mux mpeg4video in > mpeg-ps. > Playing back these files with vlc I observed a problem (that happen both > with and without b-frames): > when some frame doesn't have a timestamp (because very small b-frames > prevent next p-frames > that begin in the same pack to have one) vlc seems to rewind. > > It seems as if vlc didn't interpolate missing timestamps from the timing > values in the video bitstream. > > If needed I can upload some samples that exhibit these problem, but where? > You can put them in ftp://streams.videolan.org/incoming. -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jp_esperanto at yahoo.com.br Mon Jan 24 11:35:39 2005 From: jp_esperanto at yahoo.com.br (Juliano Pillati) Date: Mon, 24 Jan 2005 08:35:39 -0200 Subject: [vlc] Re: Questions about VLC using two channels at the same time In-Reply-To: <20050122122135.82309.qmail@web53903.mail.yahoo.com> References: <20050122122135.82309.qmail@web53903.mail.yahoo.com> Message-ID: <41F4CF7B.70703@yahoo.com.br> I use here capture video(bt878) and ido streaming all simultaneouly without problem.. sucess in v4l and v4l2 too. I use one simple command line for so streaming.. using in each card /dev/video0 video1 video2 and video3. That are separated devices.. Vlc not have problem for me doing that... Juliano Pillati Afonso Lima wrote: > Thanks for the tip BigBen, > > Now I'll see the V4L2 documentation. > I'll tell you something on monday. > > Afonso. > > */Benjamin PRACHT /* wrote: > > On Sat, Jan 22, 2005, Afonso Lima wrote : > > Hi BigBen, > > > > I'm openning two linux terminals and in each one writing the > command from videolan documentation, and only changing the number > of channel on each terminal. > > You've said VLC cannot open two channels from the same card at > the same time. Is it true? How can I fix it? Have you ever > experimented something like this? > > Its not interesting for me use two cards to view only 2 cameras. > > > > Well, does your card allow grabbing from the 2 sources at the same > time, > or are there exclusive ? (In the cases of cards with a Composite an a > S-Video Input, that is often the latter...). I'm not familiar with V4L > at all, but I guess There should be a different /dev/videoX device for > each of the capture devices if grabbing 2 streams is possible. Please > also be aware that VLC currently only has support for V4L1, not > V4L2. If > the ability to grap 2 streams at the same time from one single card > depends of the V4L2 compatibility, there might be an issue. > > -- > BigBen > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > __________________________________________________ > Converse com seus amigos em tempo real com o Yahoo! Messenger > http://br.download.yahoo.com/messenger/ > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From afonso_neto2004 at yahoo.com.br Mon Jan 24 12:49:02 2005 From: afonso_neto2004 at yahoo.com.br (Afonso Lima) Date: Mon, 24 Jan 2005 08:49:02 -0300 (ART) Subject: [vlc] Re: Questions about VLC using two channels at the same time In-Reply-To: <41F4CF7B.70703@yahoo.com.br> Message-ID: <20050124114902.1098.qmail@web53906.mail.yahoo.com> Juliano, Are You from Brazil? Here I'm use two channels of the same card. This card has only one buffer. Do I have to share it? Have you ecer worked with two or more channels simoutaneous in the same card? Thanks Afonso Lima. Juliano Pillati wrote: I use here capture video(bt878) and ido streaming all simultaneouly without problem.. sucess in v4l and v4l2 too. I use one simple command line for so streaming.. using in each card /dev/video0 video1 video2 and video3. That are separated devices.. Vlc not have problem for me doing that... Juliano Pillati Afonso Lima wrote: > Thanks for the tip BigBen, > > Now I'll see the V4L2 documentation. > I'll tell you something on monday. > > Afonso. > > */Benjamin PRACHT /* wrote: > > On Sat, Jan 22, 2005, Afonso Lima wrote : > > Hi BigBen, > > > > I'm openning two linux terminals and in each one writing the > command from videolan documentation, and only changing the number > of channel on each terminal. > > You've said VLC cannot open two channels from the same card at > the same time. Is it true? How can I fix it? Have you ever > experimented something like this? > > Its not interesting for me use two cards to view only 2 cameras. > > > > Well, does your card allow grabbing from the 2 sources at the same > time, > or are there exclusive ? (In the cases of cards with a Composite an a > S-Video Input, that is often the latter...). I'm not familiar with V4L > at all, but I guess There should be a different /dev/videoX device for > each of the capture devices if grabbing 2 streams is possible. Please > also be aware that VLC currently only has support for V4L1, not > V4L2. If > the ability to grap 2 streams at the same time from one single card > depends of the V4L2 compatibility, there might be an issue. > > -- > BigBen > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > __________________________________________________ > Converse com seus amigos em tempo real com o Yahoo! Messenger > http://br.download.yahoo.com/messenger/ > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html __________________________________________________ Converse com seus amigos em tempo real com o Yahoo! Messenger http://br.download.yahoo.com/messenger/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From PhukJiu at gmx.net Sun Jan 23 10:36:26 2005 From: PhukJiu at gmx.net (Apu Nahasapina Petilan ) Date: Sun, 23 Jan 2005 10:36:26 +0100 (MET) Subject: [vlc] srt ? Message-ID: <6603.1106472986@www48.gmx.net> VLC shows *.sub files but not *.srt files anymore! why? or am I doing something wrong? -- Sparen beginnt mit GMX DSL: http://www.gmx.net/de/go/dsl -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From anmmaa at yahoo.fr Sun Jan 23 19:38:20 2005 From: anmmaa at yahoo.fr (Anne Marie GABELICA) Date: Sun, 23 Jan 2005 19:38:20 +0100 (CET) Subject: [vlc] Mac Message-ID: <20050123183820.91598.qmail@web26607.mail.ukl.yahoo.com> Bonjour, Je suis utilisatrice de Mac OS 10 et j'aimerais pouvoir synchroniser des sous-titres .srt avec le film correpondant. Pourriez-vous m'indiquer comment faire ? Merci D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Pedro.Lorente at upc.edu Mon Jan 24 12:38:41 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Mon, 24 Jan 2005 12:38:41 +0100 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: <20050120172234.GA23923@kikal.org> Message-ID: Hello again, At first thanks Benjamin but I couldn't solve the problem, I found the vlc plugins paths at /usr/lib/vlc, and now I'm using this command line: /usr/bin/vlc --plugin-path /usr/lib/vlc -I dummy --extraintf rc also I try /usr/bin/vlc --reset-plugins-cache --plugin-path /usr/lib/vlc -I dummy --extraintf rc I get the same error: [00000440] main interface error: no suitable intf module [00000001] main vlc error: interface "rc,none" initialization failed [00000442] dummy interface: Using the dummy interface module... Any idea? Why vlc find dummy interface and it couldn't find rc interface? Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 Benjamin PRACHT Sent by: vlc-bounce at videolan.org 20/01/2005 18:22 Please respond to vlc To: vlc at videolan.org cc: Subject: [vlc] Re: vlc with Java thread problem On Thu, Jan 20, 2005, Pedro Lorente/UPC wrote : > The problem continues. I use this command line : /usr/bin/vlc -I dummy > --extraintf rc --rc-host 127.0.0.1:9999. If I put these line into a > shell it's works fine, but when I use the java code I get this error: > > VLC media player 0.8.1 Janus > libhal.c 767 : org.freedesktop.DBus.Error.ServiceDoesNotExist raised > "Service "org.freedesktop.Hal" does not exist" Well, consider that as a wrning, not an error... It is only required for the HAL service discovery module. > > [00000232] main interface error: no suitable intf module > [00000001] main vlc error: interface "rc,none" initialization failed > [00000234] dummy interface: Using the dummy interface module... > I guess VLC doesn't find the plugin path when started that way (certainly an environment issue...) Can you try with the --plugin-path /usr/src/vlc option ? (if /usr/src/vlc is the path where the modules are installed). > Anybody know why I couldn't initialize the rc interface? > -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From robert at openscenegraph.com Mon Jan 24 15:21:46 2005 From: robert at openscenegraph.com (Robert Osfield) Date: Mon, 24 Jan 2005 14:21:46 +0000 Subject: [vlc] Peformance of x86 vs x86-64 Message-ID: <200501241421.46076.robert@openscenegraph.com> Before any questions, I'd first of all I'd like thank the VideoLan developers from VLC, successufully pulling together so many different elements that make VLC is no small feat :-) I am currently evaluating libVLC as a means for reading video for real-time graphics applications. To do it I'm planning to write a plugin for the OpenSceneGraph which is an OpenGL/C++ open source graphics toolkit. Peformance wise I would like run multiple videos at once, ideal 4 or more 1280x720x25Hz movies - this is obvioulsy a stress test, and I'm not sure how easy this will be to achieve yet. One area that I'm curious about is how much impact choice of instruction set makes to the various codecs. The testing platform I'm currnetly using is a Althon64 system, currently with Sues9.1 32bit installed, I will obtain benchmarks for this, but I'm very curious about how much impact installing 64bit linux will make. So have others tested out peformance differences between x86 and x86-64 builds? Is it worth my spending the time installing 64bit linux? Thanks in advance, Robert. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Mon Jan 24 21:20:47 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Mon, 24 Jan 2005 21:20:47 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <41F41776.3040606@tiscali.it> References: <41F41776.3040606@tiscali.it> Message-ID: <41F5589F.6020500@tiscali.it> Gildas Bazin wrote: >You can put them in ftp://streams.videolan.org/incoming. >-- >Gildas Hi, I'm uploading those files. They are mp4[1-4].mpg plus a text file describing the problem: mp4description.txt. Thanks, Nico -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Tue Jan 25 14:30:48 2005 From: gbazin at altern.org (Gildas Bazin) Date: Tue, 25 Jan 2005 13:30:48 +0000 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <41F5589F.6020500@tiscali.it> References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> Message-ID: <200501251330.48347.gbazin@altern.org> On Monday 24 January 2005 20:20, Nico Sabbi wrote: > > Gildas Bazin wrote: > > >You can put them in ftp://streams.videolan.org/incoming. > > >-- > >Gildas > > > Hi, > I'm uploading those files. They are mp4[1-4].mpg plus a text file > describing the problem: > mp4description.txt. > Ok, the main problem here is that we don't have access to the frame rate information for this kind of streams so we can't really interpolate the timestamps, thus we rely on each frame having at least a DTS. Do you know if there's a way to find out the frame rate info ? -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Tue Jan 25 14:46:22 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Tue, 25 Jan 2005 14:46:22 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <200501251330.48347.gbazin@altern.org> References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> Message-ID: <41F64DAE.90002@tiscali.it> Gildas Bazin wrote: >Ok, the main problem here is that we don't have access to the frame rate >information for this kind of streams so we can't really interpolate the >timestamps, thus we rely on each frame having at least a DTS. >Do you know if there's a way to find out the frame rate info ? > >-- >Gildas > > > this is what I implemented for mplayer: take 3 video frames and store - from the vol header the time_resolution - from the vop headers the 3 time_increments calculate the minimun difference between the 3 time_increments, say diff fps = timeinc_resolution / diff This method works also when there are b-frames because they have to be in the right order, e.g. I1 P2 P3 diff = ti(P2) - ti(I1) or ti(P3) - ti(P2) I1 P3 B2 diff = ti(B2) - ti(I1) I3 B1 B2 diff = ti(I3) - ti(B2) or diff = ti(B2) - ti(B1) and so on. Obviously it's necessary to determine when time_increments wrap around, so diff(Fn+1, Fn) < 0 && diff(Fn, Fn+1) > diff((Fn+1)+timeinc_resolution, Fn). If my reasoning is not flawed this method permits to determine the initial fps, which can be repeated at every frame to determine if/when fps varies. Nico -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From soffanias at gmail.com Tue Jan 25 16:48:24 2005 From: soffanias at gmail.com (Kristinn Soffanias Runarsson) Date: Tue, 25 Jan 2005 15:48:24 +0000 Subject: [vlc] STB compatible with VLC and MPEG4 Message-ID: <160803e30501250748652457c8@mail.gmail.com> Hi... I saw on the VideoLan website that you recommend (or at least have good results with) Set-Top Boxes from Aminocom and Pace. I'll soon be rolling out a TV service over IP (live broadcast TV, not VoD) and I'm looking for set-top boxes that could recieve MPEG4 over multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to the user is limited.. MPEG2 is not an option :( Anyone here who has a take on this? Best regards from Iceland, Kristinn Soffanias Runarsson -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From PRae at aminocom.com Tue Jan 25 16:51:57 2005 From: PRae at aminocom.com (Paul Rae) Date: Tue, 25 Jan 2005 10:51:57 -0500 Subject: [vlc] Re: STB compatible with VLC and MPEG4 Message-ID: Have a look at the AmiNET120 / 130 products they will do it ;) -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf Of Kristinn Soffanias Runarsson Sent: 25 January 2005 15:48 To: vlc at videolan.org Subject: [vlc] STB compatible with VLC and MPEG4 Hi... I saw on the VideoLan website that you recommend (or at least have good results with) Set-Top Boxes from Aminocom and Pace. I'll soon be rolling out a TV service over IP (live broadcast TV, not VoD) and I'm looking for set-top boxes that could recieve MPEG4 over multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to the user is limited.. MPEG2 is not an option :( Anyone here who has a take on this? Best regards from Iceland, Kristinn Soffanias Runarsson -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From soffanias at gmail.com Tue Jan 25 17:26:04 2005 From: soffanias at gmail.com (Kristinn Soffanias Runarsson) Date: Tue, 25 Jan 2005 16:26:04 +0000 Subject: [vlc] Re: STB compatible with VLC and MPEG4 In-Reply-To: References: Message-ID: <160803e30501250826527a7d17@mail.gmail.com> Thanks Paul, but since you are working for Aminocom, you should update your webpages to reflect that ANY of the boxes can do MPEG4... because I don't see it, I don't even see the 130 product you mentioned. I saw MPEG2 codec support on all of them, and WM9 support on the 120 (ugh wm9!) I even called WorldWide sales to get some pricing, but I was told the representatives were away for a conference this week. Leaves me still stuck with no info or progression whatsoever. On Tue, 25 Jan 2005 10:51:57 -0500, Paul Rae wrote: > Have a look at the AmiNET120 / 130 products they will do it ;) > > -----Original Message----- > From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf > Of Kristinn Soffanias Runarsson > Sent: 25 January 2005 15:48 > To: vlc at videolan.org > Subject: [vlc] STB compatible with VLC and MPEG4 > > Hi... I saw on the VideoLan website that you recommend (or at least > have good results with) Set-Top Boxes from Aminocom and Pace. > > I'll soon be rolling out a TV service over IP (live broadcast TV, not > VoD) and I'm looking for set-top boxes that could recieve MPEG4 over > multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to > the user is limited.. MPEG2 is not an option :( > > Anyone here who has a take on this? > > Best regards from Iceland, > > Kristinn Soffanias Runarsson > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dani at ardex.bg Wed Jan 26 07:50:25 2005 From: dani at ardex.bg (Danislav Kostov) Date: Wed, 26 Jan 2005 08:50:25 +0200 Subject: [vlc] Re: STB compatible with VLC and MPEG4 References: Message-ID: <001301c50373$55edb010$de00a8c0@arena.net> Hi! I strugg'e for distribution in Bulgaria of Amino products since 6 months... may be they are away for a conference very often... I don't know. For sure I can tell you that there are a lot of STBs supporting every f~n CoDec ever... BUT: It's very, Very, VERY complicated when you want to import those in your country and I read some tests for those 'having every f. c.' and the quality was indecently low. That's why me and my boss both decided to work with Amino and to try to lower the MPEG2 size. It's decent to 1,8Mbps. Then (in 3-4 months) I saw on the amino site aminet120 with WMV9. May be it's '(ugh wm9!)' but at 1Mbps is perfect and it's a kind of MPEG4. Ofcourse at Aminocom will give me an answer for the price and etc. in 6 months but I still have some hope that I can sell STBs in Bulgaria. AND after everything that I wrote, Paul, you say that you have aminet130 and it has MPEG4 !hardware! support??!!!???!!!!???!!! AND PLEASE, PLS, pls, Paul: Why are not your co-workers like you: to answer to the e-mails in a day. I'm sorry for writing here such a complainings but where. My mails are answered may be in 10-20 days (if they are). With who to speak/write in Aminocom for help obout such a problem? Thank you Paul and again:excuse me for writing here but I do not have any alternative. And (again 'thew), when the bandwith is not 5-8 Mb but s.th like 1-3 Mb like in Bulgaria you do not have any choice for the codec. Greetings from Sofia, Dani. ----- Original Message ----- From: "Paul Rae" To: Sent: Tuesday, January 25, 2005 5:51 PM Subject: [vlc] Re: STB compatible with VLC and MPEG4 > Have a look at the AmiNET120 / 130 products they will do it ;) > > -----Original Message----- > From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf > Of Kristinn Soffanias Runarsson > Sent: 25 January 2005 15:48 > To: vlc at videolan.org > Subject: [vlc] STB compatible with VLC and MPEG4 > > > Hi... I saw on the VideoLan website that you recommend (or at least > have good results with) Set-Top Boxes from Aminocom and Pace. > > I'll soon be rolling out a TV service over IP (live broadcast TV, not > VoD) and I'm looking for set-top boxes that could recieve MPEG4 over > multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to > the user is limited.. MPEG2 is not an option :( > > Anyone here who has a take on this? > > Best regards from Iceland, > > Kristinn Soffanias Runarsson > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From kukloprd at gmail.com Tue Jan 25 04:34:32 2005 From: kukloprd at gmail.com (Tomino Nemcok) Date: Mon, 24 Jan 2005 19:34:32 -0800 Subject: [vlc] question about vlc Message-ID: Is vlc ale to drop some frames in specific interval? (1out of 2 frames, or 1out of 3,...) If it is not included in vlc is it possible to do it? I have an old PC, which drops some frames. (second-OK, next second freezing, with this feature I can make from 30FPS, 15FPS, which is better than freezing all the time. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From peter.mccool at tutsys.com Tue Jan 25 17:21:43 2005 From: peter.mccool at tutsys.com (McCool, Peter) Date: Tue, 25 Jan 2005 08:21:43 -0800 Subject: [vlc] VLC - Streaming Message-ID: I am using VLC to stream some video clips from a single play list on to the same multicast IP. When I use VLC to look at the network stream on another PC, it appears that the server is truncating the current clip in preparation of loading the next clip in the play list. Do you have any suggestions ? Peter McCool - Systems Engineer Tut Systems Office : 972-966-3133 (forwards to cell) Text : 9727416411 at mobile.att.net Fax : 208-445-8951 -------------- next part -------------- An HTML attachment was scrubbed... URL: From wendy.hamilton at gmail.com Wed Jan 26 04:51:16 2005 From: wendy.hamilton at gmail.com (Wendy Hamilton) Date: Wed, 26 Jan 2005 14:51:16 +1100 Subject: [vlc] VLC Message-ID: <4bca14c60501251951478474ad@mail.gmail.com> I have installed VLC and can play DVDS from Windows Explorer selecting the correct VOB file. I can play the DVD by right clicking on the appropriate drive. However when I select VLC in autoplay mode there is no response and if I double click on the drive I still get Windows Media Player. What I really want is to play VLC through autoplay mode Thanking you Wendy Hamilton -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mru at inprovide.com Wed Jan 26 07:45:05 2005 From: mru at inprovide.com (=?iso-8859-1?q?M=E5ns_Rullg=E5rd?=) Date: Wed, 26 Jan 2005 07:45:05 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> <41F64DAE.90002@tiscali.it> Message-ID: Nico Sabbi writes: > Gildas Bazin wrote: > >> Ok, the main problem here is that we don't have access to the frame >> rate information for this kind of streams so we can't really >> interpolate the timestamps, thus we rely on each frame having at >> least a DTS. >>Do you know if there's a way to find out the frame rate info ? > > this is what I implemented for mplayer: > > take 3 video frames and store > - from the vol header the time_resolution > - from the vop headers the 3 time_increments > > calculate the minimun difference between the 3 time_increments, say diff > fps = timeinc_resolution / diff > > This method works also when there are b-frames because they have to be > in the right order, e.g. You could also be nice to decoder and store the frame rate in the PSM. Have you tried whether VLC doing so makes VLC any happier? -- M?ns Rullg?rd mru at inprovide.com -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Wed Jan 26 09:58:03 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Wed, 26 Jan 2005 09:58:03 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> <41F64DAE.90002@tiscali.it> Message-ID: <41F75B9B.6050006@tiscali.it> M?ns Rullg?rd wrote: >Nico Sabbi writes: > > > >>Gildas Bazin wrote: >> >> >> >>>Ok, the main problem here is that we don't have access to the frame >>>rate information for this kind of streams so we can't really >>>interpolate the timestamps, thus we rely on each frame having at >>>least a DTS. >>>Do you know if there's a way to find out the frame rate info ? >>> >>> >>this is what I implemented for mplayer: >> >>take 3 video frames and store >>- from the vol header the time_resolution >>- from the vop headers the 3 time_increments >> >>calculate the minimun difference between the 3 time_increments, say diff >>fps = timeinc_resolution / diff >> >>This method works also when there are b-frames because they have to be >>in the right order, e.g. >> >> > >You could also be nice to decoder and store the frame rate in the >PSM. Have you tried whether VLC doing so makes VLC any happier? > > > VLC doesn't seem to be able to mux mpeg4 in mpeg-ps: the resululting files contain only audio. It would be nice to describe the framerate with a descriptor, but which? Nico -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mru at inprovide.com Wed Jan 26 10:29:05 2005 From: mru at inprovide.com (=?iso-8859-1?q?M=E5ns_Rullg=E5rd?=) Date: Wed, 26 Jan 2005 10:29:05 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> <41F64DAE.90002@tiscali.it> <41F75B9B.6050006@tiscali.it> Message-ID: Nico Sabbi writes: > M?ns Rullg?rd wrote: > >>Nico Sabbi writes: >> >>>Gildas Bazin wrote: >>> >>>>Ok, the main problem here is that we don't have access to the frame >>>>rate information for this kind of streams so we can't really >>>>interpolate the timestamps, thus we rely on each frame having at >>>>least a DTS. >>>>Do you know if there's a way to find out the frame rate info ? >>>> >>>this is what I implemented for mplayer: >>> >>>take 3 video frames and store >>>- from the vol header the time_resolution >>>- from the vop headers the 3 time_increments >>> >>>calculate the minimun difference between the 3 time_increments, say diff >>>fps = timeinc_resolution / diff >>> >>>This method works also when there are b-frames because they have to be >>>in the right order, e.g. >>> >> >>You could also be nice to decoder and store the frame rate in the >>PSM. Have you tried whether VLC doing so makes VLC any happier? >> > VLC doesn't seem to be able to mux mpeg4 in mpeg-ps: the resululting files > contain only audio. > It would be nice to describe the framerate with a descriptor, but which? The video stream descriptor seems suitable for this: Syntax No. of bits Mnemonic video_stream_descriptor(){ descriptor_tag 8 uimsbf descriptor_length 8 uimsbf multiple_frame_rate_flag 1 bslbf frame_rate_code 4 uimsbf MPEG_1_only_flag 1 bslbf constrained_parameter_flag 1 bslbf still_picture_flag 1 bslbf if (MPEG_1_only_flag = = '0'){ profile_and_level_indication 8 uimsbf chroma_format 2 uimsbf frame_rate_extension_flag 1 bslbf reserved 5 bslbf } } frame_rate_code ? This is a 4-bit field as defined in 6.3.3 of ITU-T Rec. H.262 | ISO/IEC 13818-2, See TCVP for a sample implementation. -- M?ns Rullg?rd mru at inprovide.com -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From PRae at aminocom.com Wed Jan 26 10:38:40 2005 From: PRae at aminocom.com (Paul Rae) Date: Wed, 26 Jan 2005 04:38:40 -0500 Subject: [vlc] Re: STB compatible with VLC and MPEG4 Message-ID: Dani, If you want to email me off list (prae at aminocom dot com) i will try and put you intouch with the Sales Manager for your region who should be able to better help you with your Sales questions. Regards Paul -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf Of Danislav Kostov Sent: 26 January 2005 06:50 To: vlc at videolan.org Subject: [vlc] Re: STB compatible with VLC and MPEG4 Hi! I strugg'e for distribution in Bulgaria of Amino products since 6 months... may be they are away for a conference very often... I don't know. For sure I can tell you that there are a lot of STBs supporting every f~n CoDec ever... BUT: It's very, Very, VERY complicated when you want to import those in your country and I read some tests for those 'having every f. c.' and the quality was indecently low. That's why me and my boss both decided to work with Amino and to try to lower the MPEG2 size. It's decent to 1,8Mbps. Then (in 3-4 months) I saw on the amino site aminet120 with WMV9. May be it's '(ugh wm9!)' but at 1Mbps is perfect and it's a kind of MPEG4. Ofcourse at Aminocom will give me an answer for the price and etc. in 6 months but I still have some hope that I can sell STBs in Bulgaria. AND after everything that I wrote, Paul, you say that you have aminet130 and it has MPEG4 !hardware! support??!!!???!!!!???!!! AND PLEASE, PLS, pls, Paul: Why are not your co-workers like you: to answer to the e-mails in a day. I'm sorry for writing here such a complainings but where. My mails are answered may be in 10-20 days (if they are). With who to speak/write in Aminocom for help obout such a problem? Thank you Paul and again:excuse me for writing here but I do not have any alternative. And (again 'thew), when the bandwith is not 5-8 Mb but s.th like 1-3 Mb like in Bulgaria you do not have any choice for the codec. Greetings from Sofia, Dani. ----- Original Message ----- From: "Paul Rae" To: Sent: Tuesday, January 25, 2005 5:51 PM Subject: [vlc] Re: STB compatible with VLC and MPEG4 > Have a look at the AmiNET120 / 130 products they will do it ;) > > -----Original Message----- > From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf > Of Kristinn Soffanias Runarsson > Sent: 25 January 2005 15:48 > To: vlc at videolan.org > Subject: [vlc] STB compatible with VLC and MPEG4 > > > Hi... I saw on the VideoLan website that you recommend (or at least > have good results with) Set-Top Boxes from Aminocom and Pace. > > I'll soon be rolling out a TV service over IP (live broadcast TV, not > VoD) and I'm looking for set-top boxes that could recieve MPEG4 over > multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to > the user is limited.. MPEG2 is not an option :( > > Anyone here who has a take on this? > > Best regards from Iceland, > > Kristinn Soffanias Runarsson > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From gbazin at altern.org Wed Jan 26 11:45:03 2005 From: gbazin at altern.org (Gildas Bazin) Date: Wed, 26 Jan 2005 10:45:03 +0000 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <41F75B9B.6050006@tiscali.it> References: <41F41776.3040606@tiscali.it> <41F75B9B.6050006@tiscali.it> Message-ID: <200501261045.04058.gbazin@altern.org> On Wednesday 26 January 2005 08:58, Nico Sabbi wrote: > M?ns Rullg?rd wrote: > >Nico Sabbi writes: > >>Gildas Bazin wrote: > >> > >>>Ok, the main problem here is that we don't have access to the frame > >>>rate information for this kind of streams so we can't really > >>>interpolate the timestamps, thus we rely on each frame having at > >>>least a DTS. > >>>Do you know if there's a way to find out the frame rate info ? > >>> > >>> > >>this is what I implemented for mplayer: > >> > >>take 3 video frames and store > >>- from the vol header the time_resolution > >>- from the vop headers the 3 time_increments > >> > >>calculate the minimun difference between the 3 time_increments, say diff > >>fps = timeinc_resolution / diff > >> > >>This method works also when there are b-frames because they have to be > >>in the right order, e.g. > >> > > > >You could also be nice to decoder and store the frame rate in the > >PSM. Have you tried whether VLC doing so makes VLC any happier? > > > > > VLC doesn't seem to be able to mux mpeg4 in mpeg-ps: the resululting files > contain only audio. > It would be nice to describe the framerate with a descriptor, but which? > Thanks for the time_increment trick. I'll implement that ASAP. I just managed to get hold on an ISO 14496-2 draft and apparently it is also possible to store the framerate in the VOL (the fixed_vop_time_increment field) so maybe you should consider using this to make things simpler ? As for the MPEG PS muxer in VLC, you're quite right that it doesn't support MPEG4 yet. -- Gildas -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Wed Jan 26 10:36:06 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Wed, 26 Jan 2005 10:36:06 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> <41F64DAE.90002@tiscali.it> <41F75B9B.6050006@tiscali.it> Message-ID: <41F76486.7070703@tiscali.it> M?ns Rullg?rd wrote: >The video stream descriptor seems suitable for this: > >Syntax No. of bits Mnemonic >video_stream_descriptor(){ > descriptor_tag 8 uimsbf > descriptor_length 8 uimsbf > multiple_frame_rate_flag 1 bslbf > frame_rate_code 4 uimsbf > MPEG_1_only_flag 1 bslbf > constrained_parameter_flag 1 bslbf > still_picture_flag 1 bslbf > if (MPEG_1_only_flag = = '0'){ > profile_and_level_indication 8 uimsbf > chroma_format 2 uimsbf > frame_rate_extension_flag 1 bslbf > reserved 5 bslbf > } >} > >frame_rate_code ? This is a 4-bit field as defined in 6.3.3 of ITU-T >Rec. H.262 | ISO/IEC 13818-2, > >See TCVP for a sample implementation. > > > good, I will use it. Thank you! -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Tue Jan 25 14:46:22 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Tue, 25 Jan 2005 14:46:22 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <200501251330.48347.gbazin@altern.org> References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> Message-ID: <41F64DAE.90002@tiscali.it> Gildas Bazin wrote: >Ok, the main problem here is that we don't have access to the frame rate >information for this kind of streams so we can't really interpolate the >timestamps, thus we rely on each frame having at least a DTS. >Do you know if there's a way to find out the frame rate info ? > >-- >Gildas > > > this is what I implemented for mplayer: take 3 video frames and store - from the vol header the time_resolution - from the vop headers the 3 time_increments calculate the minimun difference between the 3 time_increments, say diff fps = timeinc_resolution / diff This method works also when there are b-frames because they have to be in the right order, e.g. I1 P2 P3 diff = ti(P2) - ti(I1) or ti(P3) - ti(P2) I1 P3 B2 diff = ti(B2) - ti(I1) I3 B1 B2 diff = ti(I3) - ti(B2) or diff = ti(B2) - ti(B1) and so on. Obviously it's necessary to determine when time_increments wrap around, so diff(Fn+1, Fn) < 0 && diff(Fn, Fn+1) > diff((Fn+1)+timeinc_resolution, Fn). If my reasoning is not flawed this method permits to determine the initial fps, which can be repeated at every frame to determine if/when fps varies. Nico -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From soffanias at gmail.com Tue Jan 25 16:48:24 2005 From: soffanias at gmail.com (Kristinn Soffanias Runarsson) Date: Tue, 25 Jan 2005 15:48:24 +0000 Subject: [vlc] STB compatible with VLC and MPEG4 Message-ID: <160803e30501250748652457c8@mail.gmail.com> Hi... I saw on the VideoLan website that you recommend (or at least have good results with) Set-Top Boxes from Aminocom and Pace. I'll soon be rolling out a TV service over IP (live broadcast TV, not VoD) and I'm looking for set-top boxes that could recieve MPEG4 over multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to the user is limited.. MPEG2 is not an option :( Anyone here who has a take on this? Best regards from Iceland, Kristinn Soffanias Runarsson -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From PRae at aminocom.com Tue Jan 25 16:51:57 2005 From: PRae at aminocom.com (Paul Rae) Date: Tue, 25 Jan 2005 10:51:57 -0500 Subject: [vlc] Re: STB compatible with VLC and MPEG4 Message-ID: Have a look at the AmiNET120 / 130 products they will do it ;) -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf Of Kristinn Soffanias Runarsson Sent: 25 January 2005 15:48 To: vlc at videolan.org Subject: [vlc] STB compatible with VLC and MPEG4 Hi... I saw on the VideoLan website that you recommend (or at least have good results with) Set-Top Boxes from Aminocom and Pace. I'll soon be rolling out a TV service over IP (live broadcast TV, not VoD) and I'm looking for set-top boxes that could recieve MPEG4 over multicast UDP (generated by VLC ofcourse ;) ...since our bandwith to the user is limited.. MPEG2 is not an option :( Anyone here who has a take on this? Best regards from Iceland, Kristinn Soffanias Runarsson -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nsabbi at tiscali.it Wed Jan 26 10:55:51 2005 From: nsabbi at tiscali.it (Nico Sabbi) Date: Wed, 26 Jan 2005 10:55:51 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: <200501261045.04058.gbazin@altern.org> References: <41F41776.3040606@tiscali.it> <41F75B9B.6050006@tiscali.it> <200501261045.04058.gbazin@altern.org> Message-ID: <41F76927.80009@tiscali.it> Gildas Bazin wrote: >On Wednesday 26 January 2005 08:58, Nico Sabbi wrote: > > >>M?ns Rullg?rd wrote: >> >> >>>Nico Sabbi writes: >>> >>> >>>>Gildas Bazin wrote: >>>> >>>> >>>> >>>>>Ok, the main problem here is that we don't have access to the frame >>>>>rate information for this kind of streams so we can't really >>>>>interpolate the timestamps, thus we rely on each frame having at >>>>>least a DTS. >>>>>Do you know if there's a way to find out the frame rate info ? >>>>> >>>>> >>>>> >>>>> >>>>this is what I implemented for mplayer: >>>> >>>>take 3 video frames and store >>>>- from the vol header the time_resolution >>>>- from the vop headers the 3 time_increments >>>> >>>>calculate the minimun difference between the 3 time_increments, say diff >>>>fps = timeinc_resolution / diff >>>> >>>>This method works also when there are b-frames because they have to be >>>>in the right order, e.g. >>>> >>>> >>>> >>>You could also be nice to decoder and store the frame rate in the >>>PSM. Have you tried whether VLC doing so makes VLC any happier? >>> >>> >>> >>> >>VLC doesn't seem to be able to mux mpeg4 in mpeg-ps: the resululting files >>contain only audio. >>It would be nice to describe the framerate with a descriptor, but which? >> >> >> > >Thanks for the time_increment trick. I'll implement that ASAP. > > good :) >I just managed to get hold on an ISO 14496-2 draft and apparently it is also >possible to store the framerate in the VOL (the fixed_vop_time_increment >field) so maybe you should consider using this to make things simpler ? > > right, but only xvid stores it, while all other mpeg4 encoder don't use this field, so it would be a short-lived trick. >As for the MPEG PS muxer in VLC, you're quite right that it doesn't support >MPEG4 yet. > > > I hope it will be implemented :) >-- >Gildas > > > Bye, Nico -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Wed Jan 26 11:13:44 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 26 Jan 2005 11:13:44 +0100 Subject: [vlc] Re: question about vlc In-Reply-To: References: Message-ID: <20050126101344.GC8957@kikal.org> On Mon, Jan 24, 2005, Tomino Nemcok wrote : > Is vlc ale to drop some frames in specific interval? (1out of 2 > frames, or 1out of 3,...) > If it is not included in vlc is it possible to do it? > I have an old PC, which drops some frames. (second-OK, next second > freezing, with this feature I can make from 30FPS, 15FPS, which is > better than freezing all the time. > You can try the "hurry up" option in the preferences of the ffmpeg codec. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Wed Jan 26 11:14:39 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 26 Jan 2005 11:14:39 +0100 Subject: [vlc] Re: VLC - Streaming In-Reply-To: References: Message-ID: <20050126101439.GD8957@kikal.org> On Tue, Jan 25, 2005, McCool, Peter wrote : > I am using VLC to stream some video clips from a single play list on to the > same multicast IP. > > When I use VLC to look at the network stream on another PC, it appears that > the server is truncating the current clip in preparation of loading the next > clip in the play list. > > Do you have any suggestions ? > You can try the --sout-keep option... -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From cwbshaw at hotmail.com Wed Jan 26 12:24:43 2005 From: cwbshaw at hotmail.com (Chris Bshaw) Date: Wed, 26 Jan 2005 11:24:43 +0000 Subject: [vlc] HELP: vlc multicasting problems... Message-ID: Hi.... I am having trouble getting vlc to multicast reliably. My current setup is a 3GHz P4 running Fedora 3. I am using vdr+streamdev to take DVB channels from a Hauppage Nexus-S card and then I am using a command line similar to the following to take a http stream from vdr+streamdev and then re-stream it as a multicast: vlc http://localhost:3000/PS/14710 --sout '#standard{access=udp,mux=ts,url=239.255.12.42:1234}' --ttl 12 The reason I am using vdr+streamdev instead of letting vlc access the DVB card directly is because I found it to be much more stable this way.....with vlc I kept getting TS discontinuity errors and eventually CRC errors which would just crash or hang vlc. Most of the time, when vlc starts, about 4-5 multicast packets get sent and then nothing. Every once in a while (maybe once in every 20 attempts), a multicast stream will start and will work fine until I have to restart vlc..... I don't think it is a problem with Linux.....mp4live multicasts just fine everytime. And I am not sure the problem is related to the version of vlc either. I have tried vlc 0.7.2, 0.8.1 and cvs versions. I have also tried running vdr+streamdev and vlc on separate machines....same thing. I was wondering if perhaps anyone else has seen this, or perhaps might be able to suggest possible solutions to this problem. Thanx in advance. Chris Bradshaw. _________________________________________________________________ Share large video & music files via e-mail - sign up for Hotmail Plus! http://www.imagine-msn.com/hotmail/en-ie -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From soffanias at gmail.com Wed Jan 26 12:56:41 2005 From: soffanias at gmail.com (Kristinn Soffanias Runarsson) Date: Wed, 26 Jan 2005 11:56:41 +0000 Subject: [vlc] Re: STB compatible with VLC and MPEG4 In-Reply-To: <001301c50373$55edb010$de00a8c0@arena.net> References: <001301c50373$55edb010$de00a8c0@arena.net> Message-ID: <160803e305012603567ec4551a@mail.gmail.com> This is what I got from the Amino distributor in USA, these boxes aren't even ready yet. But still published like they've got a warehouse of them. (That goes for almost every STB I've looked for... none of them are ready). "The Model A120 will be shipping the first units around the end of March. The model A130 is the MPEG-4 part 10 box and it is scheduled for 2nd or 3rd quarter." -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From PRae at aminocom.com Wed Jan 26 13:04:34 2005 From: PRae at aminocom.com (Paul Rae) Date: Wed, 26 Jan 2005 07:04:34 -0500 Subject: [vlc] Re: STB compatible with VLC and MPEG4 Message-ID: They may not be shipping through our Disti's yet but the 120 most certainly is a real product. If you talk to your Regional Sales Manager they should be able to talk to you about samples. -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf Of Kristinn Soffanias Runarsson Sent: 26 January 2005 11:57 To: vlc at videolan.org Subject: [vlc] Re: STB compatible with VLC and MPEG4 This is what I got from the Amino distributor in USA, these boxes aren't even ready yet. But still published like they've got a warehouse of them. (That goes for almost every STB I've looked for... none of them are ready). "The Model A120 will be shipping the first units around the end of March. The model A130 is the MPEG-4 part 10 box and it is scheduled for 2nd or 3rd quarter." -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From PRae at aminocom.com Wed Jan 26 13:08:59 2005 From: PRae at aminocom.com (Paul Rae) Date: Wed, 26 Jan 2005 07:08:59 -0500 Subject: [vlc] Re: HELP: vlc multicasting problems... Message-ID: Can you reliably multicast out any files, or is it just with live streams you have issues? -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf Of Chris Bshaw Sent: 26 January 2005 11:25 To: vlc at videolan.org Subject: [vlc] HELP: vlc multicasting problems... Hi.... I am having trouble getting vlc to multicast reliably. My current setup is a 3GHz P4 running Fedora 3. I am using vdr+streamdev to take DVB channels from a Hauppage Nexus-S card and then I am using a command line similar to the following to take a http stream from vdr+streamdev and then re-stream it as a multicast: vlc http://localhost:3000/PS/14710 --sout '#standard{access=udp,mux=ts,url=239.255.12.42:1234}' --ttl 12 The reason I am using vdr+streamdev instead of letting vlc access the DVB card directly is because I found it to be much more stable this way.....with vlc I kept getting TS discontinuity errors and eventually CRC errors which would just crash or hang vlc. Most of the time, when vlc starts, about 4-5 multicast packets get sent and then nothing. Every once in a while (maybe once in every 20 attempts), a multicast stream will start and will work fine until I have to restart vlc..... I don't think it is a problem with Linux.....mp4live multicasts just fine everytime. And I am not sure the problem is related to the version of vlc either. I have tried vlc 0.7.2, 0.8.1 and cvs versions. I have also tried running vdr+streamdev and vlc on separate machines....same thing. I was wondering if perhaps anyone else has seen this, or perhaps might be able to suggest possible solutions to this problem. Thanx in advance. Chris Bradshaw. _________________________________________________________________ Share large video & music files via e-mail - sign up for Hotmail Plus! http://www.imagine-msn.com/hotmail/en-ie -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From fenrir at via.ecp.fr Wed Jan 26 13:15:27 2005 From: fenrir at via.ecp.fr (Laurent Aimar) Date: Wed, 26 Jan 2005 13:15:27 +0100 Subject: [vlc] Re: Problem playing MPEG-PS files with mpeg4video In-Reply-To: References: <41F41776.3040606@tiscali.it> <41F5589F.6020500@tiscali.it> <200501251330.48347.gbazin@altern.org> <41F64DAE.90002@tiscali.it> <41F75B9B.6050006@tiscali.it> Message-ID: <20050126121527.GA32394@via.ecp.fr> On Wed, Jan 26, 2005, M?ns Rullg?rd wrote: > Nico Sabbi writes: > > > M?ns Rullg?rd wrote: > > > >>Nico Sabbi writes: > >> > >>>Gildas Bazin wrote: > >>> > >>>>Ok, the main problem here is that we don't have access to the frame > >>>>rate information for this kind of streams so we can't really > >>>>interpolate the timestamps, thus we rely on each frame having at > >>>>least a DTS. > >>>>Do you know if there's a way to find out the frame rate info ? > >>>> > >>>this is what I implemented for mplayer: > >>> > >>>take 3 video frames and store > >>>- from the vol header the time_resolution > >>>- from the vop headers the 3 time_increments > >>> > >>>calculate the minimun difference between the 3 time_increments, say diff > >>>fps = timeinc_resolution / diff > >>> > >>>This method works also when there are b-frames because they have to be > >>>in the right order, e.g. > >>> > >> > >>You could also be nice to decoder and store the frame rate in the > >>PSM. Have you tried whether VLC doing so makes VLC any happier? > >> > > VLC doesn't seem to be able to mux mpeg4 in mpeg-ps: the resululting files > > contain only audio. > > It would be nice to describe the framerate with a descriptor, but which? > > The video stream descriptor seems suitable for this: > > Syntax No. of bits Mnemonic > video_stream_descriptor(){ > descriptor_tag 8 uimsbf > descriptor_length 8 uimsbf > multiple_frame_rate_flag 1 bslbf > frame_rate_code 4 uimsbf > MPEG_1_only_flag 1 bslbf > constrained_parameter_flag 1 bslbf > still_picture_flag 1 bslbf > if (MPEG_1_only_flag = = '0'){ > profile_and_level_indication 8 uimsbf > chroma_format 2 uimsbf > frame_rate_extension_flag 1 bslbf > reserved 5 bslbf > } > } > > frame_rate_code ? This is a 4-bit field as defined in 6.3.3 of ITU-T > Rec. H.262 | ISO/IEC 13818-2, Well, this descriptor can only be used for ISO/CEI 13818-2 and ISO/CEI 11172-2 video streams, so only MPEG-I and II. There is a descriptor for MPEG-4 video but it doesn't have a fps field. -- fenrir -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From cwbshaw at hotmail.com Wed Jan 26 15:27:57 2005 From: cwbshaw at hotmail.com (Chris Bshaw) Date: Wed, 26 Jan 2005 14:27:57 +0000 Subject: [vlc] Re: HELP: vlc multicasting problems... In-Reply-To: Message-ID: Hi.... Thanx for the reply.....actually it seems to be only live streams. I just tried multicasting a DVD and it worked everytime. I realise this probably points the finger at vdr+streamdev, but I can do the following: [Server] vdr+streamdev -> vlc http://localhost:3000/PS/16331 --sout '#standard{access=http,mux=ts,url=:1234}' [Client] vlc http://[Server]:1234 and this works perfectly, so it seems that the vlc server process is receiving the stream from vdr+streamdev. It only seems to not work when I tell --sout to use multicast.....I have listed at the end of this post the debug output from a vlc -vvv attempt at multicasting.....perhaps you might see something in the output. Thanx for your help. Chris. [root at videolan video]# vlc -vvv -R http://localhost:3000/PS/16331 --sout '#standard{access=udp,mux=ts,url=239.255.12.42:1234}' VLC media player 0.8.2-svn Janus [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000001] main vlc debug: checking builtin modules [00000001] main vlc debug: checking plugin modules [00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat [00000001] main vlc debug: recursively browsing `modules' [00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc' [00000001] main vlc debug: recursively browsing `plugins' [00000001] main vlc debug: module bank initialized, found 189 modules [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000000] main root debug: VLC media player - version 0.8.2-svn Janus - (c) 1996-2005 VideoLAN [00000000] main root debug: libvlc was configured with ./configure --enable-release --enable-dvdread --enable-livedotcom --enable-v4l --enable-pvr --enable-dvb --enable-faad --enable-toolame --enable-flac --enable-libmpeg2 --enable-portaudio --enable-alsa --enable-vlm --enable-ncurses --enable-qt --enable-mozilla --enable-dvbpsi --with-dvbpsi-tree=/root/videolan/svn/libdvbpsi --with-libdvb=/root/videolan/source/libdvb-0.5.5 --with-ffmpeg-tree=/root/videolan/source/ffmpeg-20041113 --with-toolame-tree=/root/videolan/source/toolame-02m-beta8 --with-x264-tree=/root/videolan/source/x264-20041029 [00000001] main vlc debug: translation test: code is "C" [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000001] main vlc debug: checking builtin modules [00000001] main vlc debug: checking plugin modules [00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat [00000001] main vlc debug: recursively browsing `modules' [00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc' [00000001] main vlc debug: recursively browsing `plugins' [00000001] main vlc debug: module bank initialized, found 189 modules [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000001] main vlc debug: CPU has capabilities 486 586 MMX MMXEXT SSE SSE2 FPU [00000001] main vlc debug: looking for memcpy module [00000001] main vlc debug: probing 3 candidates [00000010] main module debug: using memcpy module "memcpymmxext" [00000239] main playlist debug: creating view 1 [00000239] main playlist debug: creating view 2 [00000239] main playlist debug: creating view 3 [00000239] main playlist debug: waiting for thread completion [00000239] main playlist debug: thread 16386 (playlist) created at priority 0 (src/playlist/playlist.c:149) [00000240] main private debug: waiting for thread completion [00000240] main private debug: thread 32771 (preparser) created at priority 0 (src/playlist/playlist.c:173) [00000241] main interface debug: looking for interface module [00000241] main interface debug: probing 1 candidate [00000126] main module debug: using interface module "hotkeys" [00000241] main interface debug: interface initialized [00000241] main interface debug: thread 49156 (interface) created at priority 0 (src/interface/interface.c:210) [00000239] main playlist debug: adding playlist item `http://localhost:3000/PS/16331' ( http://localhost:3000/PS/16331 ) [00000243] main interface debug: looking for interface module [00000243] main interface debug: probing 4 candidates [00000151] main module debug: using interface module "wxwindows" [00000243] main interface debug: interface initialized [00000243] main interface debug: thread 65541 (manager) created at priority 0 (src/interface/interface.c:195) [00000243] wxwindows interface debug: accelerator table loaded [00000239] main playlist debug: beginning processing of request, 2050 us [00000239] main playlist debug: processing request [00000239] main playlist debug: next item found in 25 us [00000239] main playlist debug: creating new input thread [00000239] main playlist debug: request processed after 2155 us [00000246] main input debug: waiting for thread completion [00000246] main input debug: thread 81926 (input) created at priority 0 (src/input/input.c:230) [00000246] main input warning: sout-keep true [00000247] main stream output debug: stream=`standard' [00000248] main private debug: looking for sout stream module [00000248] main private debug: probing 1 candidate [00000248] main private debug: set sout option: sout-standard-access to udp [00000248] main private debug: set sout option: sout-standard-mux to ts [00000248] main private debug: set sout option: sout-standard-url to 239.255.12.42:1234 [00000248] stream_out_standard private debug: creating `udp/ts://239.255.12.42:1234' [00000248] stream_out_standard private debug: extention is 42:1234 [00000248] stream_out_standard private debug: extention -> mux=(null) [00000248] stream_out_standard private debug: using `udp/ts://239.255.12.42:1234' [00000250] main private debug: looking for sout access module [00000250] main private debug: probing 1 candidate [00000252] main private debug: looking for network module [00000252] main private debug: probing 2 candidates [00000252] ipv4 private debug: socket buffer size is 0x36000 instead of 0x80000 [00000101] main module debug: using network module "ipv4" [00000101] main module debug: unlocking module "ipv4" [00000252] main private debug: thread 98311 (sout write thread) created at priority 0 (udp.c:277) [00000250] access_output_udp private debug: udp access output opened(239.255.12.42:1234) [00000171] main module debug: using sout access module "access_output_udp" [00000248] stream_out_standard private debug: access opened [00000254] main private debug: looking for sout mux module [00000254] main private debug: probing 1 candidate [00000254] mux_ts private debug: Open [00000254] mux_ts private debug: shaping=200000 pcr=30000 dts_delay=200000 [00000254] mux_ts private debug: invalid csa ck (it must be 16 chars long) [00000012] main module debug: using sout mux module "mux_ts" [00000247] main stream output debug: muxer support adding stream at any time [00000248] stream_out_standard private debug: mux opened [00000025] main module debug: using sout stream module "stream_out_standard" [00000246] main input debug: `http://localhost:3000/PS/16331' gives access `http' demux `' path `localhost:3000/PS/16331' [00000246] main input debug: demux2_New: access='http' demux='' path='localhost:3000/PS/16331' [00000255] main demuxer debug: looking for access_demux module [00000255] main demuxer debug: probing 0 candidates [00000255] main demuxer warning: no access_demux module matched "http" [00000246] main input debug: access2_New: access='http' path='localhost:3000/PS/16331' [00000256] main access debug: looking for access2 module [00000256] main access debug: probing 7 candidates [00000256] access_http access debug: http: server='localhost' port=3000 file='/PS/16331 [00000256] main access debug: net: connecting to 'localhost:3000' [00000256] main access debug: looking for network module [00000256] main access debug: probing 2 candidates [00000256] ipv4 access debug: connection in progress [00000101] main module debug: using network module "ipv4" [00000101] main module debug: unlocking module "ipv4" [00000256] access_http access debug: protocol 'HTTP' answer code 200 [00000256] access_http access debug: Content-Type: video/mpeg [00000146] main module debug: using access2 module "access_http" [00000258] main private debug: pre buffering [00000258] main private debug: received first data for our buffer [00000258] main private debug: prebuffering done 67583 bytes in 0s - 105 kbytes/s [00000246] main input debug: demux2_New: access='http' demux='' path='localhost:3000/PS/16331' [00000259] main demuxer debug: looking for demux2 module [00000259] main demuxer debug: probing 33 candidates [00000259] mp4 demuxer warning: MP4 plugin discarded (not a valid file) [00000259] avi demuxer warning: avi module discarded (invalid header) [00000259] asf demuxer warning: ASF plugin discarded (not a valid file) [00000259] flac demuxer warning: flac module discarded (no startcode) [00000259] mpgv demuxer warning: ES module discarded (system startcode) [00000259] main demuxer debug: looking for id3 module [00000259] main demuxer debug: probing 2 candidates [00000259] id3tag demuxer debug: checking for ID3 tag [00000075] main module debug: using id3 module "id3tag" [00000075] main module debug: unlocking module "id3tag" [00000259] aac demuxer warning: AAC module discarded [00000259] sap demuxer warning: SDP (UDP) module discarded [00000259] mkv demuxer warning: matroska module discarded (invalid header 0x000001e0) [00000259] ogg demuxer warning: ogg module discarded (invalid header) [00000259] real demuxer warning: Real module discarded [00000259] ts demuxer warning: TS module discarded [00000259] aiff demuxer warning: AIFF module discarded [00000259] playlist demuxer warning: old import module discarded: invalid file [00000259] playlist demuxer warning: pls import module discarded [00000259] nsv demuxer warning: NSV module discarded [00000259] mod demuxer warning: MOD module discarded (path=localhost:3000/PS/16331) [00000259] au demuxer warning: AU module discarded [00000259] pva demuxer warning: PVA module discarded [00000082] main module debug: using demux2 module "ps" [00000246] main input debug: starting in synch mode [00000256] access_http access debug: GET META (null) (null) (null) [00000246] main input debug: `http://localhost:3000/PS/16331' sucessfully opened[00000246] main input debug: Selecting program id=0 [00000287] main packetizer debug: looking for packetizer module [00000287] main packetizer debug: probing 15 candidates [00000212] main module debug: using packetizer module "packetizer_mpegvideo" [00000246] main input debug: stream out mode -> no decoder thread [00000287] packetizer_mpegvideo packetizer debug: Size 720x576 fps=25.000 [00000307] main packetizer debug: looking for packetizer module [00000307] main packetizer debug: probing 15 candidates [00000180] main module debug: using packetizer module "mpeg_audio" [00000246] main input debug: stream out mode -> no decoder thread [00000287] packetizer_mpegvideo packetizer debug: need a starting pts/dts [00000247] main stream output debug: adding a new input [00000254] main private debug: adding a new input [00000254] mux_ts private debug: adding input codec=mpgv pid=68 [00000254] mux_ts private debug: new PCR PID is 68 [00000247] main stream output warning: trying to send non-dated packet to stream output! [00000307] mpeg_audio packetizer: MPGA channels:2 samplerate:48000 bitrate:256 [00000247] main stream output debug: adding a new input [00000254] main private debug: adding a new input [00000254] mux_ts private debug: adding input codec=mpga pid=69 [00000254] mux_ts private warning: packet with too strange dts (dts=1106797004935381,old=0,pcr=40000) [00000254] mux_ts private warning: packet with too strange dts (dts=1106797005195414,old=80000,pcr=80000) [00000254] mux_ts private debug: adjusting rate at -276033/200000 (7/743) [00000252] access_output_udp private debug: mmh, packets in the past (-276033) -> drop [00000252] access_output_udp private debug: dropped 1 packets >From: "Paul Rae" >Reply-To: vlc at videolan.org >To: >Subject: [vlc] Re: HELP: vlc multicasting problems... >Date: Wed, 26 Jan 2005 07:08:59 -0500 > >Can you reliably multicast out any files, or is it just with live streams >you have issues? > > >-----Original Message----- >From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf >Of Chris Bshaw >Sent: 26 January 2005 11:25 >To: vlc at videolan.org >Subject: [vlc] HELP: vlc multicasting problems... > > >Hi.... > >I am having trouble getting vlc to multicast reliably. My current setup is >a >3GHz P4 running Fedora 3. I am using vdr+streamdev to take DVB channels >from >a Hauppage Nexus-S card and then I am using a command line similar to the >following to take a http stream from vdr+streamdev and then re-stream it as >a multicast: > >vlc http://localhost:3000/PS/14710 --sout >'#standard{access=udp,mux=ts,url=239.255.12.42:1234}' --ttl 12 > >The reason I am using vdr+streamdev instead of letting vlc access the DVB >card directly is because I found it to be much more stable this >way.....with >vlc I kept getting TS discontinuity errors and eventually CRC errors which >would just crash or hang vlc. > >Most of the time, when vlc starts, about 4-5 multicast packets get sent and >then nothing. Every once in a while (maybe once in every 20 attempts), a >multicast stream will start and will work fine until I have to restart >vlc..... > >I don't think it is a problem with Linux.....mp4live multicasts just fine >everytime. And I am not sure the problem is related to the version of vlc >either. I have tried vlc 0.7.2, 0.8.1 and cvs versions. I have also tried >running vdr+streamdev and vlc on separate machines....same thing. > >I was wondering if perhaps anyone else has seen this, or perhaps might be >able to suggest possible solutions to this problem. > >Thanx in advance. > >Chris Bradshaw. > >_________________________________________________________________ >Share large video & music files via e-mail - sign up for Hotmail Plus! >http://www.imagine-msn.com/hotmail/en-ie > >-- >This is the vlc mailing-list, see http://www.videolan.org/vlc/ >To unsubscribe, please read http://www.videolan.org/support/lists.html > >-- >This is the vlc mailing-list, see http://www.videolan.org/vlc/ >To unsubscribe, please read http://www.videolan.org/support/lists.html > _________________________________________________________________ Rain, shine, sleet or snow? Find out at MSN Weather! http://www.msn.ie/weather -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From xtophe at nxtelevision.com Wed Jan 26 15:10:57 2005 From: xtophe at nxtelevision.com (Christophe Mutricy) Date: Wed, 26 Jan 2005 15:10:57 +0100 Subject: [vlc] Re: VLC In-Reply-To: <4bca14c60501251951478474ad@mail.gmail.com> References: <4bca14c60501251951478474ad@mail.gmail.com> Message-ID: <20050126141057.GA2519@nxtelevision.com> Le Wed, Jan 26, 2005, Wendy Hamilton a ?crit: > I have installed VLC and can play DVDS from Windows Explorer selecting > the correct VOB file. I can play the DVD by right clicking on the > appropriate drive. However when I select VLC in autoplay mode there is > no response and if I double click on the drive I still get Windows > Media Player. > What I really want is to play VLC through autoplay mode That could be same problem as bug #1973 (http://bugzilla.videolan.org/cgi-bin/bugzilla/show_bug.cgi?id=1973 ) -- Xtophe -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From svizikidis at gmail.com Wed Jan 26 17:50:54 2005 From: svizikidis at gmail.com (Stefanos Vizikidis) Date: Wed, 26 Jan 2005 18:50:54 +0200 Subject: [vlc] Billing information embedded on a h264avc stream possible? Message-ID: <91855bac050126085049cf0d6@mail.gmail.com> Hi. I want some help with a video-on-demand project. I want to transcode/encode the i-frames of an mpeg4 part 10 stream in order to bill my customers. Thus, I want only my customers to be able to watch the streams, given that they have the correct decoder that will make the video viewable again. Is this possible and is this the correct solution at my problem or should I look at a higher level? Thanks Stefanos -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From peter at maersk-moller.net Wed Jan 26 14:34:31 2005 From: peter at maersk-moller.net (Peter Maersk-Moller) Date: Wed, 26 Jan 2005 14:34:31 +0100 Subject: [vlc] Re: STB compatible with VLC and MPEG4 In-Reply-To: References: Message-ID: <41F79C67.2050805@maersk-moller.net> Hi Paul Paul Rae wrote: > They may not be shipping through our Disti's yet but the 120 most certainly is a real product. If you talk to your Regional Sales Manager they should be able to talk to you about samples. Which chipset is your 120 box based on ? Which chipset is your 130 box based on ? Almost all (if not all) solutions based on Sigma Designs 84xx, 85xx and 86xx are flawed failing to implement MPEG-4 part 2 Pixel Aspect Ratio (PAR) in Video Object Layer (VOL) correctly. Rumour has it, that some are planning to fix this in firmware though nobody has been able to demonstrate this yet. Another questions. Ignoring your website does not mention MPEG-4 (yet), then I noticed that it stipulates support for 'RTSP (VoD)'. Does it also supports 'RTSP Live' ? The difference is that while RTSP VoD does audio/video sync based on RTP timestamps, then RTSP Live has to sync based on RTCP (not RTSP) messages. Can your box do that ? Kind regards --PMM -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Wed Jan 26 23:52:26 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Wed, 26 Jan 2005 23:52:26 +0100 Subject: [vlc] Re: HELP: vlc multicasting problems... In-Reply-To: References: Message-ID: <20050126225226.GA31735@kikal.org> On Wed, Jan 26, 2005, Chris Bshaw wrote : > Most of the time, when vlc starts, about 4-5 multicast packets get sent and > then nothing. Every once in a while (maybe once in every 20 attempts), a > multicast stream will start and will work fine until I have to restart > vlc..... > Does VLC display any message ? Have you tried to increase http caching ? -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mru at inprovide.com Thu Jan 27 02:56:01 2005 From: mru at inprovide.com (=?iso-8859-1?q?M=E5ns_Rullg=E5rd?=) Date: Thu, 27 Jan 2005 02:56:01 +0100 Subject: [vlc] Re: STB compatible with VLC and MPEG4 References: <41F79C67.2050805@maersk-moller.net> Message-ID: Peter Maersk-Moller writes: > Hi Paul > > Paul Rae wrote: >> They may not be shipping through our Disti's yet but the 120 most >> certainly is a real product. If you talk to your Regional Sales >> Manager they should be able to talk to you about samples. > > Which chipset is your 120 box based on ? > > Which chipset is your 130 box based on ? > > Almost all (if not all) solutions based on Sigma Designs 84xx, 85xx > and 86xx are flawed failing to implement MPEG-4 part 2 Pixel Aspect > Ratio (PAR) in Video Object Layer (VOL) correctly. Rumour has it, that > some are planning to fix this in firmware though nobody has been able > to demonstrate this yet. This is interesting, do you have a pointer to more information on the issue? > Another questions. Ignoring your website does not mention MPEG-4 > (yet), then I noticed that it stipulates support for 'RTSP > (VoD)'. Does it also supports 'RTSP Live' ? The difference is that > while RTSP VoD does audio/video sync based on RTP timestamps, then > RTSP Live has to sync based on RTCP (not RTSP) messages. Can your box > do that ? Speaking as an Amino 103/110 user, it appears to me that these models so A/V sync based on PTS values in the MPEG-TS stream, using the audio stream as reference. Do the 120/130 models behave similarly? -- M?ns Rullg?rd mru at inprovide.com -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dani at ardex.bg Thu Jan 27 07:25:47 2005 From: dani at ardex.bg (Danislav Kostov) Date: Thu, 27 Jan 2005 08:25:47 +0200 Subject: [vlc] Re: STB compatible with VLC and MPEG4 References: <001301c50373$55edb010$de00a8c0@arena.net> <160803e305012603567ec4551a@mail.gmail.com> Message-ID: <003301c50439$0b774520$de00a8c0@arena.net> So then I have to delay my work and wait for the 130 series... ----- Original Message ----- From: "Kristinn Soffanias Runarsson" To: Sent: Wednesday, January 26, 2005 1:56 PM Subject: [vlc] Re: STB compatible with VLC and MPEG4 > This is what I got from the Amino distributor in USA, these boxes > aren't even ready yet. But still published like they've got a > warehouse of them. (That goes for almost every STB I've looked for... > none of them are ready). > > "The Model A120 will be shipping the first units around the end of March. > > The model A130 is the MPEG-4 part 10 box and it is scheduled for 2nd > or 3rd quarter." > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From dani at ardex.bg Thu Jan 27 07:30:41 2005 From: dani at ardex.bg (Danislav Kostov) Date: Thu, 27 Jan 2005 08:30:41 +0200 Subject: [vlc] Re: STB compatible with VLC and MPEG4 References: <41F79C67.2050805@maersk-moller.net> Message-ID: <004901c50439$b9fa1af0$de00a8c0@arena.net> Hi again! I'm trying also with www.ninelanes.tv Yuo can try also and lets see... ----- Original Message ----- From: "Peter Maersk-Moller" To: Sent: Wednesday, January 26, 2005 3:34 PM Subject: [vlc] Re: STB compatible with VLC and MPEG4 > Hi Paul > > Paul Rae wrote: >> They may not be shipping through our Disti's yet but the 120 most >> certainly is a real product. If you talk to your Regional Sales Manager >> they should be able to talk to you about samples. > > Which chipset is your 120 box based on ? > > Which chipset is your 130 box based on ? > > Almost all (if not all) solutions based on Sigma Designs 84xx, 85xx and > 86xx are flawed failing to implement MPEG-4 part 2 Pixel Aspect Ratio > (PAR) in Video Object Layer (VOL) correctly. Rumour has it, that some are > planning to fix this in firmware though nobody has been able to > demonstrate this yet. > > Another questions. Ignoring your website does not mention MPEG-4 (yet), > then I noticed that it stipulates support for 'RTSP (VoD)'. Does it also > supports 'RTSP Live' ? The difference is that while RTSP VoD does > audio/video sync based on RTP timestamps, then RTSP Live has to sync based > on RTCP (not RTSP) messages. Can your box do that ? > > Kind regards > > --PMM > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From galen at myhome.net Thu Jan 27 07:45:56 2005 From: galen at myhome.net (Galen) Date: Wed, 26 Jan 2005 22:45:56 -0800 Subject: [vlc] When do we see working OpenGL in recent OS X VLC builds? Message-ID: I'm on a 1.33 GHz G4 PowerBook (not far from the current fastest PowerBooks or even G4s) and the latest 10.3 build and I have desperately wanted to watch 720p and 1080i HDTV streams raw, but everything online said you need a dual G5 - and this seems to be true based on what I experimented with. Everything I tried failed miserably... EyeTV, QuickTime, current and past builds of VLC, mplayer, pretty much anything that could decode MPEG2 to the screen. When I compiled command line MPEG like ffmpeg which decoded to null, and that was the only thing that proved to perform well enough, so I knew that my system could handle the raw MPEG 2 decoding. So after quite a bit of playing, I have found that 0.7.2 works great provided that OpenGL is setup and a few other settings properly configured. It virtually eliminates the issues with slow YUV/RGB conversion. The performance goes from unwatchable to beautiful for even the most complex, high data rate 1080i and 720p transport streams. Even for lower resolution stuff, the video resizing is absolutely beautifully fluid, instead of jerky and problematic like in 0.8.2. And for fun, you can always apply OpenGL effects with no performance hit. On lower-end machines, this makes DVD playback work smoothly for once, and lowers laptop battery usage while increasing available CPU time in most situations. When will we see this feature in a newer build? I miss having easy GUI control of post processing and an equalizer, not to mention that keeping two versions on hand gets annoying (some newer formats and stuff doesn't work on 0.7.2!) Is there any chance we'll see better de-interlacing performance as well? Some of the de-interlacing features (particularly the better, higher-quality modes) cause playback issues - but I wonder if these could be accelerated, via OpenGL or better G4 optimization. I know my Radeon 9700 has an awful lot of additional GPU time available, even when handling HDTV.... Tiger (Mac OS 10.4) will probably hand off all this YUV conversion stuff to the GPU nicely through core graphics and whatnot, but until then, can we get a version of VLC working great? We already have the technology, just incorporate it properly! With all these Mac minis out there with G4s along the lines of my machine, I bet a lot of people will be hooking these things up to their HDTVs. With a small size, FireWire to import HDTV and DVI out to play back the video, people are going to want to start using these with their HDTV sets... and VLC will be the perfect solution. Thoughts anybody? -Galen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From peter at maersk-moller.net Thu Jan 27 10:15:06 2005 From: peter at maersk-moller.net (Peter Maersk-Moller) Date: Thu, 27 Jan 2005 10:15:06 +0100 Subject: [vlc] Re: STB compatible with VLC and MPEG4 In-Reply-To: <004901c50439$b9fa1af0$de00a8c0@arena.net> References: <41F79C67.2050805@maersk-moller.net> <004901c50439$b9fa1af0$de00a8c0@arena.net> Message-ID: <41F8B11A.7040309@maersk-moller.net> Hi Danislav Kostov wrote: > Hi again! > I'm trying also with www.ninelanes.tv > Yuo can try also and lets see... Ninelanes promoted their STB at a show/conference in Amsterdam last year, and they wrote (and still write) that they have support for MPEG-4 part 2 and coming support for MPEG-4 part 10. However when we tried to order a test sample, they had to admit that they hadn't actually implemented MPEG-4 part 2 support yet, but they would do it if we paid 20-50k $US for development. In some cultures, that would be considered as business, but where I come from, a more precise wording like 'a hoax' would not be out of the question. Ninelanes solution btw. is not based on Sigmas chipset, but another chipset I forgot the name of. --PMM -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From PRae at aminocom.com Thu Jan 27 10:19:53 2005 From: PRae at aminocom.com (Paul Rae) Date: Thu, 27 Jan 2005 04:19:53 -0500 Subject: [vlc] Re: STB compatible with VLC and MPEG4 Message-ID: I cant answer some of the questions that have been raised on this thread without a NDA in place. I can assure you the 120 is a real product and shipping in low volumes to some customers. Again speak to our Sales guys, they can give you the whole Sales pitch and potentially sort out samples. 130 is being worked on and will be ready soon ... -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org]On Behalf Of Danislav Kostov Sent: 27 January 2005 06:26 To: vlc at videolan.org Subject: [vlc] Re: STB compatible with VLC and MPEG4 So then I have to delay my work and wait for the 130 series... ----- Original Message ----- From: "Kristinn Soffanias Runarsson" To: Sent: Wednesday, January 26, 2005 1:56 PM Subject: [vlc] Re: STB compatible with VLC and MPEG4 > This is what I got from the Amino distributor in USA, these boxes > aren't even ready yet. But still published like they've got a > warehouse of them. (That goes for almost every STB I've looked for... > none of them are ready). > > "The Model A120 will be shipping the first units around the end of March. > > The model A130 is the MPEG-4 part 10 box and it is scheduled for 2nd > or 3rd quarter." > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From peter at maersk-moller.net Thu Jan 27 10:28:51 2005 From: peter at maersk-moller.net (Peter Maersk-Moller) Date: Thu, 27 Jan 2005 10:28:51 +0100 Subject: [vlc] Re: STB compatible with VLC and MPEG4 In-Reply-To: References: <41F79C67.2050805@maersk-moller.net> Message-ID: <41F8B453.7020500@maersk-moller.net> Hi M?ns M?ns Rullg?rd wrote: > Peter Maersk-Moller writes: >>Almost all (if not all) solutions based on Sigma Designs 84xx, 85xx >>and 86xx are flawed failing to implement MPEG-4 part 2 Pixel Aspect >>Ratio (PAR) in Video Object Layer (VOL) correctly. Rumour has it, that >>some are planning to fix this in firmware though nobody has been able >>to demonstrate this yet. > > This is interesting, do you have a pointer to more information on the > issue? Do you mean "PAR", or "VOL" or "Rumours" ? >>Another questions. Ignoring your website does not mention MPEG-4 >>(yet), then I noticed that it stipulates support for 'RTSP >>(VoD)'. Does it also supports 'RTSP Live' ? The difference is that >>while RTSP VoD does audio/video sync based on RTP timestamps, then >>RTSP Live has to sync based on RTCP (not RTSP) messages. Can your box >>do that ? > Speaking as an Amino 103/110 user, it appears to me that these models > so A/V sync based on PTS values in the MPEG-TS stream, using the audio > stream as reference. Do the 120/130 models behave similarly? Right, but that would probably be when you play a MPEG-2 TS multicasted in UDP and as such not RTSP. Can it also play MPEG-2 TS in RTP in multicasted UDP as the output of dvbstream (if you are familiar with that program) ? I believe it is described in RFC2250, though I haven't checked recently. BTW, can VLC play MPEG-2 TS in RTP in multicasted UDP. I seem to be unable to make it work. Maybe because VLC require a MPEG-2 TS to be in a UDP packet rather than being wrapped in a RTP packet in a UDP packet... or does it ? Anybody who knows ? Is there a tool that will take MPEG-2 TS in RTP in multicasted UDP and re-multicast it as MPEG-2 TS in UDP according to 133818-1 ? And does anyone have a copy of 133818-1 I can borrow ? Kind regards --PMM -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mru at inprovide.com Thu Jan 27 13:31:02 2005 From: mru at inprovide.com (=?iso-8859-1?q?M=E5ns_Rullg=E5rd?=) Date: Thu, 27 Jan 2005 13:31:02 +0100 Subject: [vlc] Re: STB compatible with VLC and MPEG4 References: <41F79C67.2050805@maersk-moller.net> <41F8B453.7020500@maersk-moller.net> Message-ID: Peter Maersk-Moller writes: > Hi M?ns > > M?ns Rullg?rd wrote: >> Peter Maersk-Moller writes: >>>Almost all (if not all) solutions based on Sigma Designs 84xx, 85xx >>>and 86xx are flawed failing to implement MPEG-4 part 2 Pixel Aspect >>>Ratio (PAR) in Video Object Layer (VOL) correctly. Rumour has it, that >>>some are planning to fix this in firmware though nobody has been able >>>to demonstrate this yet. >> >> This is interesting, do you have a pointer to more information on the >> issue? > > Do you mean "PAR", or "VOL" or "Rumours" ? I know what PAR and VOL are. I'm looking for something more than a suggestion of rumors of a bug in the Sigma decoder, i.e. does anyone know somewhere I might at least read the rumor? >>>Another questions. Ignoring your website does not mention MPEG-4 >>>(yet), then I noticed that it stipulates support for 'RTSP >>>(VoD)'. Does it also supports 'RTSP Live' ? The difference is that >>>while RTSP VoD does audio/video sync based on RTP timestamps, then >>>RTSP Live has to sync based on RTCP (not RTSP) messages. Can your box >>>do that ? >> Speaking as an Amino 103/110 user, it appears to me that these models >> so A/V sync based on PTS values in the MPEG-TS stream, using the audio >> stream as reference. Do the 120/130 models behave similarly? > > Right, but that would probably be when you play a MPEG-2 TS multicasted > in UDP and as such not RTSP. When playing RTSP streams, the Amino asks for a raw MPEG-TS to be delivered over UDP. From my experience, it seems to use exactly the same timing method for RTSP and multicasted streams. -- M?ns Rullg?rd mru at inprovide.com -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From cwbshaw at hotmail.com Thu Jan 27 13:43:53 2005 From: cwbshaw at hotmail.com (Chris Bshaw) Date: Thu, 27 Jan 2005 12:43:53 +0000 Subject: [vlc] Re: HELP: vlc multicasting problems... In-Reply-To: <20050126225226.GA31735@kikal.org> Message-ID: Hi.... I tried varying http-caching up and down using --http-cachine but it didn't help...it worked twice and then stopped working. As regards other messages from vlc, I sent a follow up posting earlier to the mail list with the debug output from vlc -vvv.....I have included this output again at the end of this post in case you missed it earlier. Apart from the output of vlc -vvv, I don't know what other messages I could look for.....if there are other debug options I can use, please let me know and I will try them. Thanx for your help. Chris. [root at videolan video]# vlc -vvv -R http://localhost:3000/PS/16331 --sout '#standard{access=udp,mux=ts,url=239.255.12.42:1234}' VLC media player 0.8.2-svn Janus [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000001] main vlc debug: checking builtin modules [00000001] main vlc debug: checking plugin modules [00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat [00000001] main vlc debug: recursively browsing `modules' [00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc' [00000001] main vlc debug: recursively browsing `plugins' [00000001] main vlc debug: module bank initialized, found 189 modules [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000000] main root debug: VLC media player - version 0.8.2-svn Janus - (c) 1996-2005 VideoLAN [00000000] main root debug: libvlc was configured with ./configure --enable-release --enable-dvdread --enable-livedotcom --enable-v4l --enable-pvr --enable-dvb --enable-faad --enable-toolame --enable-flac --enable-libmpeg2 --enable-portaudio --enable-alsa --enable-vlm --enable-ncurses --enable-qt --enable-mozilla --enable-dvbpsi --with-dvbpsi-tree=/root/videolan/svn/libdvbpsi --with-libdvb=/root/videolan/source/libdvb-0.5.5 --with-ffmpeg-tree=/root/videolan/source/ffmpeg-20041113 --with-toolame-tree=/root/videolan/source/toolame-02m-beta8 --with-x264-tree=/root/videolan/source/x264-20041029 [00000001] main vlc debug: translation test: code is "C" [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000001] main vlc debug: checking builtin modules [00000001] main vlc debug: checking plugin modules [00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat [00000001] main vlc debug: recursively browsing `modules' [00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc' [00000001] main vlc debug: recursively browsing `plugins' [00000001] main vlc debug: module bank initialized, found 189 modules [00000001] main vlc debug: opening config file /root/.vlc/vlcrc [00000001] main vlc debug: CPU has capabilities 486 586 MMX MMXEXT SSE SSE2 FPU [00000001] main vlc debug: looking for memcpy module [00000001] main vlc debug: probing 3 candidates [00000010] main module debug: using memcpy module "memcpymmxext" [00000239] main playlist debug: creating view 1 [00000239] main playlist debug: creating view 2 [00000239] main playlist debug: creating view 3 [00000239] main playlist debug: waiting for thread completion [00000239] main playlist debug: thread 16386 (playlist) created at priority 0 (src/playlist/playlist.c:149) [00000240] main private debug: waiting for thread completion [00000240] main private debug: thread 32771 (preparser) created at priority 0 (src/playlist/playlist.c:173) [00000241] main interface debug: looking for interface module [00000241] main interface debug: probing 1 candidate [00000126] main module debug: using interface module "hotkeys" [00000241] main interface debug: interface initialized [00000241] main interface debug: thread 49156 (interface) created at priority 0 (src/interface/interface.c:210) [00000239] main playlist debug: adding playlist item `http://localhost:3000/PS/16331' ( http://localhost:3000/PS/16331 ) [00000243] main interface debug: looking for interface module [00000243] main interface debug: probing 4 candidates [00000151] main module debug: using interface module "wxwindows" [00000243] main interface debug: interface initialized [00000243] main interface debug: thread 65541 (manager) created at priority 0 (src/interface/interface.c:195) [00000243] wxwindows interface debug: accelerator table loaded [00000239] main playlist debug: beginning processing of request, 2050 us [00000239] main playlist debug: processing request [00000239] main playlist debug: next item found in 25 us [00000239] main playlist debug: creating new input thread [00000239] main playlist debug: request processed after 2155 us [00000246] main input debug: waiting for thread completion [00000246] main input debug: thread 81926 (input) created at priority 0 (src/input/input.c:230) [00000246] main input warning: sout-keep true [00000247] main stream output debug: stream=`standard' [00000248] main private debug: looking for sout stream module [00000248] main private debug: probing 1 candidate [00000248] main private debug: set sout option: sout-standard-access to udp [00000248] main private debug: set sout option: sout-standard-mux to ts [00000248] main private debug: set sout option: sout-standard-url to 239.255.12.42:1234 [00000248] stream_out_standard private debug: creating `udp/ts://239.255.12.42:1234' [00000248] stream_out_standard private debug: extention is 42:1234 [00000248] stream_out_standard private debug: extention -> mux=(null) [00000248] stream_out_standard private debug: using `udp/ts://239.255.12.42:1234' [00000250] main private debug: looking for sout access module [00000250] main private debug: probing 1 candidate [00000252] main private debug: looking for network module [00000252] main private debug: probing 2 candidates [00000252] ipv4 private debug: socket buffer size is 0x36000 instead of 0x80000 [00000101] main module debug: using network module "ipv4" [00000101] main module debug: unlocking module "ipv4" [00000252] main private debug: thread 98311 (sout write thread) created at priority 0 (udp.c:277) [00000250] access_output_udp private debug: udp access output opened(239.255.12.42:1234) [00000171] main module debug: using sout access module "access_output_udp" [00000248] stream_out_standard private debug: access opened [00000254] main private debug: looking for sout mux module [00000254] main private debug: probing 1 candidate [00000254] mux_ts private debug: Open [00000254] mux_ts private debug: shaping=200000 pcr=30000 dts_delay=200000 [00000254] mux_ts private debug: invalid csa ck (it must be 16 chars long) [00000012] main module debug: using sout mux module "mux_ts" [00000247] main stream output debug: muxer support adding stream at any time [00000248] stream_out_standard private debug: mux opened [00000025] main module debug: using sout stream module "stream_out_standard" [00000246] main input debug: `http://localhost:3000/PS/16331' gives access `http' demux `' path `localhost:3000/PS/16331' [00000246] main input debug: demux2_New: access='http' demux='' path='localhost:3000/PS/16331' [00000255] main demuxer debug: looking for access_demux module [00000255] main demuxer debug: probing 0 candidates [00000255] main demuxer warning: no access_demux module matched "http" [00000246] main input debug: access2_New: access='http' path='localhost:3000/PS/16331' [00000256] main access debug: looking for access2 module [00000256] main access debug: probing 7 candidates [00000256] access_http access debug: http: server='localhost' port=3000 file='/PS/16331 [00000256] main access debug: net: connecting to 'localhost:3000' [00000256] main access debug: looking for network module [00000256] main access debug: probing 2 candidates [00000256] ipv4 access debug: connection in progress [00000101] main module debug: using network module "ipv4" [00000101] main module debug: unlocking module "ipv4" [00000256] access_http access debug: protocol 'HTTP' answer code 200 [00000256] access_http access debug: Content-Type: video/mpeg [00000146] main module debug: using access2 module "access_http" [00000258] main private debug: pre buffering [00000258] main private debug: received first data for our buffer [00000258] main private debug: prebuffering done 67583 bytes in 0s - 105 kbytes/s [00000246] main input debug: demux2_New: access='http' demux='' path='localhost:3000/PS/16331' [00000259] main demuxer debug: looking for demux2 module [00000259] main demuxer debug: probing 33 candidates [00000259] mp4 demuxer warning: MP4 plugin discarded (not a valid file) [00000259] avi demuxer warning: avi module discarded (invalid header) [00000259] asf demuxer warning: ASF plugin discarded (not a valid file) [00000259] flac demuxer warning: flac module discarded (no startcode) [00000259] mpgv demuxer warning: ES module discarded (system startcode) [00000259] main demuxer debug: looking for id3 module [00000259] main demuxer debug: probing 2 candidates [00000259] id3tag demuxer debug: checking for ID3 tag [00000075] main module debug: using id3 module "id3tag" [00000075] main module debug: unlocking module "id3tag" [00000259] aac demuxer warning: AAC module discarded [00000259] sap demuxer warning: SDP (UDP) module discarded [00000259] mkv demuxer warning: matroska module discarded (invalid header 0x000001e0) [00000259] ogg demuxer warning: ogg module discarded (invalid header) [00000259] real demuxer warning: Real module discarded [00000259] ts demuxer warning: TS module discarded [00000259] aiff demuxer warning: AIFF module discarded [00000259] playlist demuxer warning: old import module discarded: invalid file [00000259] playlist demuxer warning: pls import module discarded [00000259] nsv demuxer warning: NSV module discarded [00000259] mod demuxer warning: MOD module discarded (path=localhost:3000/PS/16331) [00000259] au demuxer warning: AU module discarded [00000259] pva demuxer warning: PVA module discarded [00000082] main module debug: using demux2 module "ps" [00000246] main input debug: starting in synch mode [00000256] access_http access debug: GET META (null) (null) (null) [00000246] main input debug: `http://localhost:3000/PS/16331' sucessfully opened[00000246] main input debug: Selecting program id=0 [00000287] main packetizer debug: looking for packetizer module [00000287] main packetizer debug: probing 15 candidates [00000212] main module debug: using packetizer module "packetizer_mpegvideo" [00000246] main input debug: stream out mode -> no decoder thread [00000287] packetizer_mpegvideo packetizer debug: Size 720x576 fps=25.000 [00000307] main packetizer debug: looking for packetizer module [00000307] main packetizer debug: probing 15 candidates [00000180] main module debug: using packetizer module "mpeg_audio" [00000246] main input debug: stream out mode -> no decoder thread [00000287] packetizer_mpegvideo packetizer debug: need a starting pts/dts [00000247] main stream output debug: adding a new input [00000254] main private debug: adding a new input [00000254] mux_ts private debug: adding input codec=mpgv pid=68 [00000254] mux_ts private debug: new PCR PID is 68 [00000247] main stream output warning: trying to send non-dated packet to stream output! [00000307] mpeg_audio packetizer: MPGA channels:2 samplerate:48000 bitrate:256 [00000247] main stream output debug: adding a new input [00000254] main private debug: adding a new input [00000254] mux_ts private debug: adding input codec=mpga pid=69 [00000254] mux_ts private warning: packet with too strange dts (dts=1106797004935381,old=0,pcr=40000) [00000254] mux_ts private warning: packet with too strange dts (dts=1106797005195414,old=80000,pcr=80000) [00000254] mux_ts private debug: adjusting rate at -276033/200000 (7/743) [00000252] access_output_udp private debug: mmh, packets in the past (-276033) -> drop [00000252] access_output_udp private debug: dropped 1 packets >From: Benjamin PRACHT >Reply-To: vlc at videolan.org >To: vlc at videolan.org >Subject: [vlc] Re: HELP: vlc multicasting problems... >Date: Wed, 26 Jan 2005 23:52:26 +0100 > >On Wed, Jan 26, 2005, Chris Bshaw wrote : > > Most of the time, when vlc starts, about 4-5 multicast packets get sent >and > > then nothing. Every once in a while (maybe once in every 20 attempts), a > > multicast stream will start and will work fine until I have to restart > > vlc..... > > > >Does VLC display any message ? Have you tried to increase http caching ? > >-- >BigBen > >-- >This is the vlc mailing-list, see http://www.videolan.org/vlc/ >To unsubscribe, please read http://www.videolan.org/support/lists.html > _________________________________________________________________ Feeling flirtatious? Chat cheekily on MSN Messenger! http://messenger.msn.co.uk -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From hartman at videolan.org Thu Jan 27 14:07:13 2005 From: hartman at videolan.org (Derk-Jan Hartman) Date: Thu, 27 Jan 2005 14:07:13 +0100 Subject: [vlc] Re: When do we see working OpenGL in recent OS X VLC builds? In-Reply-To: References: Message-ID: <5C7E7386-7064-11D9-8F77-0030656CFA88@videolan.org> Unfortunately, my machine does not support OpenGL well enough to have the plugin working on my machine. The developer that had been working on this has been very busy, and therefore the plugin needed to be disabled after some core changes took place that broke the module. (It is enabled again in the development build, but as far as i know it is still crashing) I feel your pain, but atm I cannot do much about it. Unfortunately I have found that the number of developers with knowledge on QT, OpenGL and CoreAudio in the MacOSX world is very small and that many of them just don't have the time to contribute to Open Source projects very much. DJ On 27 jan 2005, at 07:45, Galen wrote: > I'm on a 1.33 GHz G4 PowerBook (not far from the current fastest > PowerBooks or even G4s) and the latest 10.3 build and I have > desperately wanted to watch 720p and 1080i HDTV streams raw, but > everything online said you need a dual G5 - and this seems to be true > based on what I experimented with. Everything I tried failed > miserably... EyeTV, QuickTime, current and past builds of VLC, > mplayer, pretty much anything that could decode MPEG2 to the screen. > When I compiled command line MPEG like ffmpeg which decoded to null, > and that was the only thing that proved to perform well enough, so I > knew that my system could handle the raw MPEG 2 decoding. > > So after quite a bit of playing, I have found that 0.7.2 works great > provided that OpenGL is setup and a few other settings properly > configured. It virtually eliminates the issues with slow YUV/RGB > conversion. The performance goes from unwatchable to beautiful for > even the most complex, high data rate 1080i and 720p transport > streams. Even for lower resolution stuff, the video resizing is > absolutely beautifully fluid, instead of jerky and problematic like in > 0.8.2. And for fun, you can always apply OpenGL effects with no > performance hit. On lower-end machines, this makes DVD playback work > smoothly for once, and lowers laptop battery usage while increasing > available CPU time in most situations. > > When will we see this feature in a newer build? I miss having easy GUI > control of post processing and an equalizer, not to mention that > keeping two versions on hand gets annoying (some newer formats and > stuff doesn't work on 0.7.2!) > > Is there any chance we'll see better de-interlacing performance as > well? Some of the de-interlacing features (particularly the better, > higher-quality modes) cause playback issues - but I wonder if these > could be accelerated, via OpenGL or better G4 optimization. I know my > Radeon 9700 has an awful lot of additional GPU time available, even > when handling HDTV.... > > Tiger (Mac OS 10.4) will probably hand off all this YUV conversion > stuff to the GPU nicely through core graphics and whatnot, but until > then, can we get a version of VLC working great? We already have the > technology, just incorporate it properly! With all these Mac minis out > there with G4s along the lines of my machine, I bet a lot of people > will be hooking these things up to their HDTVs. With a small size, > FireWire to import HDTV and DVI out to play back the video, people are > going to want to start using these with their HDTV sets... and VLC > will be the perfect solution. > > Thoughts anybody? > > -Galen > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > --- Universiteit Twente Derk-Jan Hartman (d.hartman at student.utwente dot nl) http://home.student.utwente.nl/d.hartman -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Pedro.Lorente at upc.edu Wed Jan 26 11:44:42 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Wed, 26 Jan 2005 11:44:42 +0100 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: <20050120172234.GA23923@kikal.org> Message-ID: Hello again, At first thanks Benjamin but I couldn't solve the problem, I found the vlc plugins paths at /usr/lib/vlc, and now I'm using this command line: /usr/bin/vlc --plugin-path /usr/lib/vlc -I dummy --extraintf rc also I try /usr/bin/vlc --reset-plugins-cache --plugin-path /usr/lib/vlc -I dummy --extraintf rc I get the same error: [00000440] main interface error: no suitable intf module [00000001] main vlc error: interface "rc,none" initialization failed [00000442] dummy interface: Using the dummy interface module... Any idea? Why vlc find dummy interface and it couldn't find rc interface? Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 Benjamin PRACHT Sent by: vlc-bounce at videolan.org 20/01/2005 18:22 Please respond to vlc To: vlc at videolan.org cc: Subject: [vlc] Re: vlc with Java thread problem On Thu, Jan 20, 2005, Pedro Lorente/UPC wrote : > The problem continues. I use this command line : /usr/bin/vlc -I dummy > --extraintf rc --rc-host 127.0.0.1:9999. If I put these line into a > shell it's works fine, but when I use the java code I get this error: > > VLC media player 0.8.1 Janus > libhal.c 767 : org.freedesktop.DBus.Error.ServiceDoesNotExist raised > "Service "org.freedesktop.Hal" does not exist" Well, consider that as a wrning, not an error... It is only required for the HAL service discovery module. > > [00000232] main interface error: no suitable intf module > [00000001] main vlc error: interface "rc,none" initialization failed > [00000234] dummy interface: Using the dummy interface module... > I guess VLC doesn't find the plugin path when started that way (certainly an environment issue...) Can you try with the --plugin-path /usr/src/vlc option ? (if /usr/src/vlc is the path where the modules are installed). > Anybody know why I couldn't initialize the rc interface? > -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From lmma at free.fr Thu Jan 27 14:55:28 2005 From: lmma at free.fr (lmma) Date: Thu, 27 Jan 2005 14:55:28 +0100 Subject: [vlc] parametrage vlc media player Message-ID: <000801c50477$dcde4260$f18caa50@pbncomputer> Bonjour, J'ai install? VLC media player mais je n'arrive pas ? lire des vid?os en ligne. Je n'ai plus d'autre lecteur multim?dia sauf le lecteur qui ?tait install? sur l'ordinateur (lecteur Windows media version 6.4.07.1121). J'ai Windows 98SE. Comment configurer VLC comme lecteur par d?faut ? Merci d'avance de votre r?ponse, L. Muresan -------------- next part -------------- An HTML attachment was scrubbed... URL: From terryj at mtmrecognition.com Thu Jan 27 15:49:53 2005 From: terryj at mtmrecognition.com (Terry Jackson) Date: Thu, 27 Jan 2005 08:49:53 -0600 Subject: [vlc] Re: When do we see working OpenGL in recent OS X VLC builds? In-Reply-To: Message-ID: This is an automated email response from terryj at mtmrecognition.com In an effort to cut down on SPAM, all improperly formatted email is being deleted by this recipent. If you meant to send this email as valid corrospondence and not as SPAM, them please re-send the email following the proper rules of email ettiqutte, and my filter should allow it to come through. for more information, please visit here: http://email.about.com/cs/netiquettetips/qt/et020801.htm http://email.about.com/cs/netiquettetips/tp/core_netiquette.htm -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Thu Jan 27 16:15:31 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Thu, 27 Jan 2005 16:15:31 +0100 Subject: [vlc] Re: HELP: vlc multicasting problems... In-Reply-To: References: <20050126225226.GA31735@kikal.org> Message-ID: <20050127151531.GA3779@kikal.org> On Thu, Jan 27, 2005, Chris Bshaw wrote : > [00000307] mpeg_audio packetizer: MPGA channels:2 samplerate:48000 > bitrate:256 > [00000247] main stream output debug: adding a new input > [00000254] main private debug: adding a new input > [00000254] mux_ts private debug: adding input codec=mpga pid=69 > [00000254] mux_ts private warning: packet with too strange dts > (dts=1106797004935381,old=0,pcr=40000) > [00000254] mux_ts private warning: packet with too strange dts > (dts=1106797005195414,old=80000,pcr=80000) > [00000254] mux_ts private debug: adjusting rate at -276033/200000 (7/743) > [00000252] access_output_udp private debug: mmh, packets in the past > (-276033) -> drop > [00000252] access_output_udp private debug: dropped 1 packets > Well, I don't know the ps demux and ts mux well enough to give a definitive answer, but the issue might be here (issue with the timestamps...) I don't know if this is related to an issue with the input stream or in VLC's processing chain.. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From terryj at mtmrecognition.com Thu Jan 27 16:22:20 2005 From: terryj at mtmrecognition.com (Terry Jackson) Date: Thu, 27 Jan 2005 09:22:20 -0600 Subject: [vlc] Spam Filter acting up--My Apologies In-Reply-To: Message-ID: my Spam filter is acting up, and I'm working to fix it. Please ignore any emails from me as I work to correct it. Terry Jackson -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mkazmier at empowersat.com Thu Jan 27 17:09:33 2005 From: mkazmier at empowersat.com (Michael S. Kazmier) Date: Thu, 27 Jan 2005 09:09:33 -0700 Subject: [vlc] Re: STB compatible with VLC and MPEG4 In-Reply-To: <41F8B11A.7040309@maersk-moller.net> Message-ID: <000b01c5048a$977ae9e0$6401a8c0@VAIO> FYI: The Ninelanes box is running the Equator BSP15 DSP @ 350 MHz. --Mike > -----Original Message----- > From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf > Of Peter Maersk-Moller > Sent: Thursday, January 27, 2005 2:15 AM > To: vlc at videolan.org > Subject: [vlc] Re: STB compatible with VLC and MPEG4 > > Hi > > Danislav Kostov wrote: > > Hi again! > > I'm trying also with www.ninelanes.tv > > Yuo can try also and lets see... > > Ninelanes promoted their STB at a show/conference in Amsterdam last year, > and they wrote (and still write) that they have support for MPEG-4 part 2 > and coming support for MPEG-4 part 10. However when we tried to order a > test > sample, they had to admit that they hadn't actually implemented MPEG-4 > part 2 support yet, but they would do it if we paid 20-50k $US for > development. In some cultures, that would be considered as business, > but where I come from, a more precise wording like 'a hoax' would > not be out of the question. > > Ninelanes solution btw. is not based on Sigmas chipset, but > another chipset I forgot the name of. > > --PMM > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From admin at triparish.net Thu Jan 27 20:41:30 2005 From: admin at triparish.net (Lewey Taylor) Date: Thu, 27 Jan 2005 13:41:30 -0600 Subject: [vlc] ghost trails with mpeg4 Message-ID: <1106854890.9196.5.camel@localhost> I am broadcasting from a remote site using GXG from Grandtec. We are seeing a ghosting affect or a smearing affect on images that are moving. I am sure this is fixable with some tuning but need a pointer in the right direction. Here is my command. /usr/local/bin/vlc -d v4l:/dev/video:norm=ntsc:size=320x240: --sout '#transcode{vcodec=mp4v,acodec=none,vb=500,vt=200000,keyint=80,sfilter=time:marq:logo}:std{access=udp,mux=ts,url=172.16.0.100}'--ttl 12 --time-format="%H:%M:%S %D" --time-x=170 --time-y=226 --freetype-font=/usr/share/fonts/corefonts/arialbd.ttf --marq-x=125 --marq-y=0 --marq-marquee="Provided by TriParish.net" --marq-timeout=0 --logo-file=/home/ltaylor/triplogo.png --logo-x=230 --logo-y=0 --logo-transparency=80 TIA Lewey -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From astanton at optivel.com Thu Jan 27 15:10:20 2005 From: astanton at optivel.com (Aaron F Stanton) Date: Thu, 27 Jan 2005 09:10:20 -0500 Subject: [vlc] Debian Message-ID: <41F8F64C.5010004@optivel.com> Hi - I believe you have Sid and Sarge reversed. Sarge is the next release of Debian, and Sid is the perpetually broken set. (If you recall Toy Story, Sid was the next door neighbor kid who blew up his toys.) Thanks, Aaron F Stanton -- Reject Fear - Embrace Hope -------------- next part -------------- A non-text attachment was scrubbed... Name: astanton.vcf Type: text/x-vcard Size: 313 bytes Desc: not available URL: From musicbendah at yahoo.co.uk Thu Jan 27 16:41:58 2005 From: musicbendah at yahoo.co.uk (miza) Date: Thu, 27 Jan 2005 15:41:58 +0000 (GMT) Subject: [vlc] looking for comaptabile programme Message-ID: <20050127154158.92917.qmail@web25001.mail.ukl.yahoo.com> dear yal not too sure correct place to ask but will do any how. do u have an open source based learning a language programme that can be programmed to include other non western languages. i.e a programme like the RosettaStone language learning programme ( it enables one to listen, read speak( speech recognition feature) and writing. please help out cheers Mizac --------------------------------- ALL-NEW Yahoo! Messenger - all new features - even more fun! -------------- next part -------------- An HTML attachment was scrubbed... URL: From Pedro.Lorente at upc.edu Thu Jan 27 17:32:24 2005 From: Pedro.Lorente at upc.edu (Pedro Lorente/UPC) Date: Thu, 27 Jan 2005 17:32:24 +0100 Subject: [vlc] Re: vlc with Java thread problem In-Reply-To: Message-ID: I'm alone? anybody know how can I solve it? :( Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 "Pedro Lorente/UPC" Sent by: vlc-bounce at videolan.org 26/01/2005 11:44 Please respond to vlc To: vlc at videolan.org cc: Subject: [vlc] Re: vlc with Java thread problem Hello again, At first thanks Benjamin but I couldn't solve the problem, I found the vlc plugins paths at /usr/lib/vlc, and now I'm using this command line: /usr/bin/vlc --plugin-path /usr/lib/vlc -I dummy --extraintf rc also I try /usr/bin/vlc --reset-plugins-cache --plugin-path /usr/lib/vlc -I dummy --extraintf rc I get the same error: [00000440] main interface error: no suitable intf module [00000001] main vlc error: interface "rc,none" initialization failed [00000442] dummy interface: Using the dummy interface module... Any idea? Why vlc find dummy interface and it couldn't find rc interface? Pedro Lorente MediaCAT - Fundaci?n i2CAT 93 413 70 59 Benjamin PRACHT Sent by: vlc-bounce at videolan.org 20/01/2005 18:22 Please respond to vlc To: vlc at videolan.org cc: Subject: [vlc] Re: vlc with Java thread problem On Thu, Jan 20, 2005, Pedro Lorente/UPC wrote : > The problem continues. I use this command line : /usr/bin/vlc -I dummy > --extraintf rc --rc-host 127.0.0.1:9999. If I put these line into a > shell it's works fine, but when I use the java code I get this error: > > VLC media player 0.8.1 Janus > libhal.c 767 : org.freedesktop.DBus.Error.ServiceDoesNotExist raised > "Service "org.freedesktop.Hal" does not exist" Well, consider that as a wrning, not an error... It is only required for the HAL service discovery module. > > [00000232] main interface error: no suitable intf module > [00000001] main vlc error: interface "rc,none" initialization failed > [00000234] dummy interface: Using the dummy interface module... > I guess VLC doesn't find the plugin path when started that way (certainly an environment issue...) Can you try with the --plugin-path /usr/src/vlc option ? (if /usr/src/vlc is the path where the modules are installed). > Anybody know why I couldn't initialize the rc interface? > -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From bigben+spam at videolan.org Fri Jan 28 18:01:14 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Fri, 28 Jan 2005 18:01:14 +0100 Subject: [vlc] Re: Debian In-Reply-To: <41F8F64C.5010004@optivel.com> References: <41F8F64C.5010004@optivel.com> Message-ID: <20050128170114.GA12823@kikal.org> On Thu, Jan 27, 2005, Aaron F Stanton wrote : > Hi - > > I believe you have Sid and Sarge reversed. Sarge is the next release of > Debian, and Sid is the perpetually broken set. (If you recall Toy > Story, Sid was the next door neighbor kid who blew up his toys.) > I beleive you are talking about the statement on this page ? http://www.videolan.org/vlc/download-debian.html In that cas, there is no error... VLC is in included in sid as well as in sarge . What this page means is that we don't provide any newer package for testing than the ones that are already provided by debian. The reason for that is that, as versions of libraries, name of packages, etc tend to change quite often in this version of the distribution, it would force us to repackage everything every few days (yes, VLC has a lot of dependencies). This was mostly important until a few months ago, when there was only a very old version of VLC in sarge. This isn't the case anymore (Sarge currently includes 0.8.1). -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From el_antipapa at hotmail.com Sat Jan 29 00:28:31 2005 From: el_antipapa at hotmail.com (C M) Date: Fri, 28 Jan 2005 23:28:31 +0000 Subject: [vlc] feature request Message-ID: Thank you for making this excellent software. VCL does not support screenshots, could you add this new feature on next releases? i am talking about video frame screenshots (frame captures). thanks once again -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mfmbusiness at earthlink.net Sat Jan 29 21:52:45 2005 From: mfmbusiness at earthlink.net (Mark Moriarty) Date: Sat, 29 Jan 2005 15:52:45 -0500 Subject: [vlc] Re: feature request In-Reply-To: Message-ID: Screenshots, called snapshots, are available in the development baseline (and the nightly builds). If using the wxwindows user interface, select Video -- Snapshot, else press CTRL-s. -----Original Message----- From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of C M Sent: Friday, January 28, 2005 6:29 PM To: vlc at videolan.org Subject: [vlc] feature request Thank you for making this excellent software. VCL does not support screenshots, could you add this new feature on next releases? i am talking about video frame screenshots (frame captures). thanks once again -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From nirnimesh at students.iiit.net Sun Jan 30 18:21:01 2005 From: nirnimesh at students.iiit.net (Nirnimesh) Date: Sun, 30 Jan 2005 22:51:01 +0530 Subject: [vlc] Running vlc on a Sharp Zaurus PDA [arm-linux] Message-ID: <41FD177D.6010706@students.iiit.net> I'm trying to compile and run VLC on my Sharp Zaurus 6000SL PDA, but I get a seg-fault while running. I configure as shown below. I have the arm-linux-(gcc, g++, ld, etc) tools in my PATH. The --with-ffmpeg-tree, --with-dvbpsi-tree, --with-sdl-prefix, etc contain the corresponding libraries compiled for arm-linux. I used /opt/Qtopia/sharp as the --with-qte path because I was not able to get it done with /opt/qt-embedded-2.3.7 (qt.h not found). The compilation goes on all fine (I had to remove some libjpeg.h) and I get the ARM vlc. But when I run it on the pda, the last few lines after which I get a seg-fault are: main module debug: using demux module "ps" main input debug: looking for a subtitle file in Documents/Image_Files/ ( which is the path to the file to be played) packetizer_mpegvideo packetizer debug: Size 320x240 fps=25.000 Segmentation Fault My configuration is: ./configure --mandir=${prefix}/share/man \ --infodir=${prefix}/share/info \ --host=arm-linux \ --target=arm-linux \ --prefix=/usr --disable-plugins --disable-gtk --disable-gtk2 --disable-gnome --disable-gnome2 --disable-qt --disable-kde --disable-xosd --disable-ogg --disable-tarkin --disable-tremor --disable-theorea --enable-qte --disable-x11 --disable-xvideo --enable-dummy --enable-v4l --enable-sout --enable-fb --enable-sdl --disable-oss --disable-alsa --disable-dvd --disable-dvdread --disable-vcd --disable-maxosx --disable-freetype --disable-a52 --disable-faad2 --disable-flac --disable-libmpeg2 --enable-libdvbpsi --with-dvbpsi-tree=/home/surya/VLC/libdvbpsi3-0.1.4 --disable-mkv --enable-mad --with-mad-tree=/home/surya/PDA/libmad-0.15.1b --disable-pda --with-sdl-config-path=/usr/local/arm/2.95.3/arm-linux/usr/bin --with-sdl-prefix=/usr/local/arm/2.95.3/arm-linux/usr --enable-ffmpeg --with-ffmpeg-tree=/home/surya/VLC/ffmpeg-20040520 --with-tuning=strongarm1100 --with-qte=/opt/Qtopia/sharp -- Any ideas/suggestions? Has someone used vlc with qt-embedded? Where does opie fit in? My PDA desktop is Qtopia; for Opie, does that need to be replaced? Nirnimesh -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From ch.vos at hccnet.nl Sun Jan 30 20:52:37 2005 From: ch.vos at hccnet.nl (charles vos) Date: Sun, 30 Jan 2005 20:52:37 +0100 Subject: [vlc] Re: Running vlc on a Sharp Zaurus PDA [arm-linux] In-Reply-To: <41FD177D.6010706@students.iiit.net> References: <41FD177D.6010706@students.iiit.net> Message-ID: <7E382D99-72F8-11D9-9E40-0003930EB28A@hccnet.nl> this is caused by a virus, please take action. Op 30-jan-05 om 18:21 heeft Nirnimesh het volgende geschreven: > > I'm trying to compile and run VLC on my Sharp Zaurus 6000SL PDA, but I > get a seg-fault while running. > > I configure as shown below. I have the arm-linux-(gcc, g++, ld, etc) > tools in my PATH. The --with-ffmpeg-tree, --with-dvbpsi-tree, > --with-sdl-prefix, etc contain the corresponding libraries compiled > for arm-linux. I used /opt/Qtopia/sharp as the --with-qte path because > I was not able to get it done with /opt/qt-embedded-2.3.7 (qt.h not > found). > The compilation goes on all fine (I had to remove some libjpeg.h) and > I get the ARM vlc. But when I run it on the pda, the last few lines > after which I get a seg-fault are: > > main module debug: using demux module "ps" > main input debug: looking for a subtitle file in > Documents/Image_Files/ ( which is the path to the file to be > played) > packetizer_mpegvideo packetizer debug: Size 320x240 fps=25.000 > Segmentation Fault > > > My configuration is: > > ./configure --mandir=${prefix}/share/man \ > --infodir=${prefix}/share/info \ > --host=arm-linux \ > --target=arm-linux \ > --prefix=/usr --disable-plugins --disable-gtk --disable-gtk2 > --disable-gnome --disable-gnome2 --disable-qt --disable-kde > --disable-xosd --disable-ogg --disable-tarkin --disable-tremor > --disable-theorea --enable-qte --disable-x11 --disable-xvideo > --enable-dummy --enable-v4l --enable-sout --enable-fb --enable-sdl > --disable-oss --disable-alsa --disable-dvd --disable-dvdread > --disable-vcd --disable-maxosx --disable-freetype --disable-a52 > --disable-faad2 --disable-flac --disable-libmpeg2 --enable-libdvbpsi > --with-dvbpsi-tree=/home/surya/VLC/libdvbpsi3-0.1.4 --disable-mkv > --enable-mad --with-mad-tree=/home/surya/PDA/libmad-0.15.1b > --disable-pda > --with-sdl-config-path=/usr/local/arm/2.95.3/arm-linux/usr/bin > --with-sdl-prefix=/usr/local/arm/2.95.3/arm-linux/usr --enable-ffmpeg > --with-ffmpeg-tree=/home/surya/VLC/ffmpeg-20040520 > --with-tuning=strongarm1100 --with-qte=/opt/Qtopia/sharp > -- > > Any ideas/suggestions? Has someone used vlc with qt-embedded? Where > does opie fit in? My PDA desktop is Qtopia; for Opie, does that need > to be replaced? > > > Nirnimesh > > -- > This is the vlc mailing-list, see http://www.videolan.org/vlc/ > To unsubscribe, please read http://www.videolan.org/support/lists.html > > -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From madmax at libertysurf.fr Sun Jan 30 23:26:53 2005 From: madmax at libertysurf.fr (madmax) Date: Sun, 30 Jan 2005 23:26:53 +0100 Subject: [vlc] webcam problem... References: <41FD177D.6010706@students.iiit.net> <7E382D99-72F8-11D9-9E40-0003930EB28A@hccnet.nl> Message-ID: <001b01c5071a$ccdce560$0200a8c0@esclave> Hi all, I tested the last SVN version, and I had a problem on Linux (not on Win32) with my webcam. Using the default options, now I just can't only see a black screen... it's like if the brightness was too high... I saw that there was new options like contrast and brightness... so I think the problem should really come from this. Thanks for all, Maxime Alexandre -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From bigben+spam at videolan.org Mon Jan 31 18:22:56 2005 From: bigben+spam at videolan.org (Benjamin PRACHT) Date: Mon, 31 Jan 2005 18:22:56 +0100 Subject: [vlc] Re: webcam problem... In-Reply-To: <001b01c5071a$ccdce560$0200a8c0@esclave> References: <41FD177D.6010706@students.iiit.net> <7E382D99-72F8-11D9-9E40-0003930EB28A@hccnet.nl> <001b01c5071a$ccdce560$0200a8c0@esclave> Message-ID: <20050131172256.GB23446@kikal.org> On Sun, Jan 30, 2005, madmax wrote : > Hi all, > > I tested the last SVN version, and I had a problem on Linux (not on > Win32) with my webcam. Using the default options, now I just can't only see > a black screen... it's like if the brightness was too high... I saw that > there was new options like contrast and brightness... so I think the problem > should really come from this. > Well, the brightness can be set indeed on v4l devices. On versions <=0.8.1, it can be done by adding a "brightness=" statement to the v4l MRL. On the svn version, you can also set it by using the --v4l-brightness option. -- BigBen -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From rickdavisjr at comcast.net Mon Jan 31 16:43:54 2005 From: rickdavisjr at comcast.net (Rick Davis) Date: Mon, 31 Jan 2005 10:43:54 -0500 Subject: [vlc] SPDIF Message-ID: <20050131154338.6B302B75A@krishna.via.ecp.fr> How does the SPDIF interface work? Does it automatically detect the SPDIF capability? Thanks Rick -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jg at jguk.org Sun Jan 30 23:35:42 2005 From: jg at jguk.org (J. Grant) Date: Sun, 30 Jan 2005 22:35:42 +0000 Subject: [vlc] vlc 0.7.2 wxWindows: Crash Message-ID: <41FD613E.5070708@jguk.org> Hi, at the end of watching a film I get this crash. on my win2k sp3 machine. Let me know if there is a way for me to get you more info. Please ensure you include my email address in any replies. Kind regards JG 003F8BC0 aaa 003F8BC1 add byte ptr [edi],al 003F8BC4 add byte ptr [eax],al 003F8BC6 or byte ptr [eax],al 003F8BC8 xor byte ptr [ebx],al 003F8BCA aas 003F8BCB add byte ptr [eax],dh -> CRASH 003F8BCD add edi,dword ptr [edi] 003F8BCF add byte ptr [eax],al 003F8BD1 add byte ptr [eax],al 003F8BD3 add byte ptr [eax],ah 003F8BD5 popfd 003F8BD6 or byte ptr [ecx],al 003F8BD8 add byte ptr [eax],al The thread 'Win32 Thread' (0x49c) has exited with code 0 (0x0). Unhandled exception at 0x003f8bcd in vlc.exe: 0xC0000005: Access violation reading location 0x00000000. CRASH> 003f8bcd() libwxwindows_plugin.dll!64a6281b() libwxwindows_plugin.dll!64a5db17() libwxwindows_plugin.dll!64acb51b() USER32.DLL!77e16333() USER32.DLL!77e161c1() USER32.DLL!77e1620f() libwxwindows_plugin.dll!649c25f2() NTDLL.DLL!77f9ff57() USER32.DLL!77e1177e() USER32.DLL!77e15e6e() libwxwindows_plugin.dll!64a15261() libwxwindows_plugin.dll!64a14f76() libwxwindows_plugin.dll!64a151a8() libwxwindows_plugin.dll!649c21e9() libwxwindows_plugin.dll!64941d83() libwxwindows_plugin.dll!649c230a() libwxwindows_plugin.dll!64a7b4e2() libwxwindows_plugin.dll!649c279a() libwxwindows_plugin.dll!64941bb4() libwxwindows_plugin.dll!64941a87() vlc.exe!0041dde9() vlc.exe!0041d96b() vlc.exe!0040c8cc() vlc.exe!00408ebe() vlc.exe!004013a7() vlc.exe!004010b5() vlc.exe!0040123d() vlc.exe!00401268() KERNEL32.DLL!7c59893d() -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From anfanzio at tin.it Sun Jan 30 23:56:51 2005 From: anfanzio at tin.it (antonio fanzio) Date: Sun, 30 Jan 2005 23:56:51 +0100 (ora solare Europa occidentale) Subject: [vlc] vlc stupid question Message-ID: <41FD6633.000003.03464@UTENTE-T49GZVSP> hi i am an italian pharmacist. i have a stupid ( i am feeling myself stupid ) question .vlc must be by me as server and by another one as player for transmitting through internet from me to him ? or i use vlc as server and by the other one will open for ex. windows media player ? sorry for the stupid question but i was trying all sundays evening thx Antonio -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMSTP.gif Type: image/gif Size: 8871 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: BackGrnd.jpg Type: image/jpeg Size: 1431 bytes Desc: not available URL: -------------- next part -------------- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.2 - Release Date: 28/01/2005 From jbensoussan at club-internet.fr Sun Jan 30 23:59:26 2005 From: jbensoussan at club-internet.fr (=?ISO-8859-1?Q?J=E9r=E9my_Bensoussan?=) Date: Sun, 30 Jan 2005 17:59:26 -0500 Subject: [vlc] Subtitles Message-ID: <9705B414-7312-11D9-860C-000D9336728E@club-internet.fr> Hi, I have just a little suggestion I have my subtitles files in a folder named Subtitles, in my Video folder. I think it would be great to configure VLC to look automatically in this folder instead of selecting the file every time I want to open a subtitled video. I am sure it wont be a problem for you to implement that. -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From mschmidt at absint.com Mon Jan 31 10:00:31 2005 From: mschmidt at absint.com (Michael Schmidt) Date: Mon, 31 Jan 2005 10:00:31 +0100 Subject: [vlc] Suggestion for Mac GUI Message-ID: <20050131100031.58a75fff.mschmidt@absint.com> Hi, here's a little suggestion for Macintosh GUI of VLC: it would be nice if the control window (the one with play/pause buttons) would have the flag "Hide on deactivate" activated in Interface Builder. I often doubleclick a movie file and after watching it close the player window. When I switch to another application, the control window is a little bit anoying, so that I either have to quit the VLC.app or - more straightforward - close the control window. This is anoying when you watch the next movie since you have to reactivate it in the menu... -- Michael Schmidt -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From chilled.ambience at gmail.com Mon Jan 31 10:36:01 2005 From: chilled.ambience at gmail.com (andrew) Date: Mon, 31 Jan 2005 20:36:01 +1100 Subject: [vlc] Great Player, Message-ID: <4f34ca3a05013101365821c280@mail.gmail.com> A brilliant piece of work. Free and open source. Pat on the back for all the developers. First player i found that could easily adjust xvid brightness/contrast. As my screen is frustratingly too dark. Does not have the best GUI but works well, relatively low CPU usage (PIII). Cheers, may great movie viewings Andrew -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Klaus.Heilemann at t-online.de Mon Jan 31 17:48:01 2005 From: Klaus.Heilemann at t-online.de (:-) Date: Mon, 31 Jan 2005 17:48:01 +0100 Subject: [vlc] Kein Sound bei der TV Ausgabe Message-ID: <41FE6141.4030303@mas.de> Hallo VLC Team, Erst mal ein dickes Lob f?r die Entwicklung ihrer Software ! Leider bin ich als User teilweise etwas ?berfordert :-) Mein Problem: Kein Sound bei der TV Ausgabe //dshow:// :dshow-vdev="Hauppauge WinTV 88x Video Capture" :dshow-adev="NVIDIA(R) nForce(TM) Audio" :dshow-size="" :no-dshow-config :dshow-tuner Durch einige Versuche weis ich dass diese TV-Karte (PVR-150mec) etwas schwierig zu Handhaben ist, da die Soundausgabe irgendwie im Mpeg Videostrom mit eingebunden sein soll? Allerdings ist es mir m?glich mit einem Graf-Editor Bild und Ton dieser Karte zu bekommen, demnach sollten alle n?tigen Treiber und Filter u.s.w. auf dem Recher vorhanden sein. Div Versuche verschiedene dieser Filter einzusetzten, blieben allerdings Erfolglos. Ist es n?tig den Pin7 der Crossbar als Tuner-Audio Eingang separat zu aktivieren? Allerdings erscheint bei Device Eigenschaften unter Crossbar eigentlich Relate Pin: 7 AudioTuner In und Related Pin:1 Audio Decoder Out (Link Related Streams ist anw?hlbar aber scheinbar ohne Einfluss?) K?nnen Sie mir evtl. weiterhelfen? Mit freundlichen Gr??en Klaus Heilemann Daten: WinXP SP1 nvidia Motherbord nvidia FX5200 Hauppauge PVR-150mec nForce Sound -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From jonesrf1 at qwest.net Mon Jan 31 21:58:44 2005 From: jonesrf1 at qwest.net (Randolph Jones) Date: Mon, 31 Jan 2005 12:58:44 -0800 Subject: [vlc] unsubcsribe Message-ID: <41FE9C04.3050307@qwest.net> -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From fk at aenneburghardt.de Mon Jan 31 22:12:43 2005 From: fk at aenneburghardt.de (=?ISO-8859-1?Q?Felix_K=FChne?=) Date: Mon, 31 Jan 2005 22:12:43 +0100 Subject: [vlc] Re: Kein Sound bei der TV Ausgabe In-Reply-To: <41FE6141.4030303@mas.de> References: <41FE6141.4030303@mas.de> Message-ID: <6626102a1a85846becffaeaa16d65b87@aenneburghardt.de> Lieber Klaus Heilemann, bitte stellen Sie Ihre Frage an die VLC-User-Liste bitte erneut auf Englisch. Au?er mir (dem deutschen ?bersetzer von VLC und den VideoLAN-Dokumenten) sprechen die Entwickler so gut wie kein Deutsch, weshalb Ihre Frage nicht beantwortet werden wird. Da ich mich mich mit solchen Acquisition-cards nicht auskenne, kann ich sie Ihnen auch nicht auf Deutsch beantworten. mfg, Felix --- For the non-German people: this end-user has problems with the playback of an input-stream from a Hauppauge WinTV 88x card. I asked him to post his question in English again, so more users can benefit from the solution. Regards, FK -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From yoann at via.ecp.fr Mon Jan 31 23:51:55 2005 From: yoann at via.ecp.fr (Yoann Peronneau) Date: Mon, 31 Jan 2005 23:51:55 +0100 Subject: [vlc] Re: Subtitles In-Reply-To: <9705B414-7312-11D9-860C-000D9336728E@club-internet.fr> References: <9705B414-7312-11D9-860C-000D9336728E@club-internet.fr> Message-ID: <20050131225155.GC4576@via.ecp.fr> On Sun, Jan 30, 2005, J?r?my Bensoussan wrote: > I have my subtitles files in a folder named Subtitles, in my Video > folder. > I think it would be great to configure VLC to look automatically in > this folder instead of selecting the file every time I want to open a > subtitled video. You can use the sub-autodetect-path option like this : vlc --sub-autodetect-path "path_to_Video_folder/Subtitle" Then VLC will look automatically in this folder for a corresponding subtitles file. Of course this option can also be set in the preferences panel. -- yoann -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html From Klaus.Heilemann at t-online.de Mon Jan 31 23:17:34 2005 From: Klaus.Heilemann at t-online.de (:-) Date: Mon, 31 Jan 2005 23:17:34 +0100 Subject: [vlc] Sound Problem on TV out Message-ID: <41FEAE7E.2000802@mas.de> Hallo VLC Team, First, mutch Tanks for Develop the VLC Software, great Work ! My Problem: No Sound if I play a Stream from my TV-Card //dshow:// :dshow-vdev="Hauppauge WinTV 88x Video Capture" :dshow-adev="NVIDIA(R) nForce(TM) Audio" :dshow-size="" :no-dshow-config :dshow-tuner I have the Hauppauge PVR-150mec (includet in some of the MS Media Center Editions PC's) I know it`s should be tricky to run this Card, it heart the Sound is packt in the Mpeg Stream? I'm absolutly not confirm with this Stuff :-) If I build a Graf, and run this then I have Picture ans Sound well. But I have to do this over the (HW) ""Hauppauge WinTV88x Mpeg Encoder". There I have on Pin "I2S" I have Audio over the Crossbar, and on Pin "656" I can take the Video. Is it possilbe to connect this Encoder whit VLC ? The Device Crossbar shows me in CLV that the Related Pin 7 are Audio Tuner In, and the Related Pin:1 are Audio Decoder Out, the Feature "Link Related Stream" I can switcht on, but nothing happends. Maybe you can Help me ? Best Regards Klaus Heilemann Output in Messages Window: --------------------------------- main debug: creating new input thread main debug: set input option: dshow-vdev to Hauppauge WinTV 88x Video Capture main debug: set input option: dshow-config to false main debug: set input option: dshow-tuner to true main debug: waiting for thread completion main debug: `dshow://' gives access `dshow' demux `' path `' main debug: demux2_New: access='dshow' demux='' path='' main debug: looking for access_demux module main debug: probing 1 candidate main debug: thread 3972 (input) created at priority 1 (src/input/input.c:228) dshow debug: found device: Hauppauge WinTV 88x Video Capture dshow debug: found device: MV Demo Source dshow debug: using device: Hauppauge WinTV 88x Video Capture dshow debug: EnumDeviceCaps: output pin: Capture dshow debug: EnumDeviceCaps: output pin: Preview dshow debug: EnumDeviceCaps: output pin: VBI dshow debug: EnumDeviceCaps: input pin: Analog Video In dshow debug: EnumDeviceCaps: output pin: 656 dshow debug: EnumDeviceCaps: output pin: I2S <------------------------------ (There I have Sound) dshow debug: EnumDeviceCaps: input pin: Analog Audio In dshow debug: EnumDeviceCaps: trying pin Capture dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:768, height:576 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:320, height:240 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:384, height:288 dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:768, height:576 dshow debug: CaptureFilter::JoinFilterGraph dshow debug: connecting filters dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [not connected] dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::QueryFilterInfo dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryAccept [OK] (width=320, height=240, chroma=I420) dshow debug: CapturePin::ReceiveConnection [OK] dshow debug: CapturePin::GetAllocatorRequirements dshow debug: CapturePin::GetAllocator dshow debug: CapturePin::NotifyAllocator dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: Found Existing Route For ouput 0 (type 12) to input 1 (type 1) dshow debug: Crossbar at depth 0, Found Route For ouput 0 (type 12) to input 1 (type 1) dshow debug: filters connected successfully ! dshow debug: Configuring Tuner Properties dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: MEDIATYPE_Video dshow debug: selected video pin accepts format: I420 dshow debug: found device: NVIDIA(R) nForce(TM) Audio dshow debug: using device: NVIDIA(R) nForce(TM) Audio dshow debug: EnumDeviceCaps: output pin: Capture dshow debug: EnumDeviceCaps: input pin: Stereo Mix dshow debug: EnumDeviceCaps: input pin: Mono Mix dshow debug: EnumDeviceCaps: input pin: Aux dshow debug: EnumDeviceCaps: input pin: Video dshow debug: EnumDeviceCaps: input pin: CD Audio dshow debug: EnumDeviceCaps: input pin: Line In dshow debug: EnumDeviceCaps: input pin: Microphone dshow debug: EnumDeviceCaps: input pin: Phone dshow debug: EnumDeviceCaps: input pin: SPDIF dshow debug: EnumDeviceCaps: trying pin Capture dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:32000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:32000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:48000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:48000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:96000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:96000 bits/sample:16 dshow debug: CaptureFilter::JoinFilterGraph dshow debug: connecting filters dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [not connected] dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::QueryFilterInfo dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryAccept [OK] (channels=2, samples/sec=44100, bits/samples=16, format=araw) dshow debug: CapturePin::ReceiveConnection [OK] dshow debug: CapturePin::NotifyAllocator dshow debug: CapturePin::QueryAccept [OK] (channels=2, samples/sec=44100, bits/samples=16, format=araw) dshow debug: filters connected successfully ! dshow debug: Configuring Tuner Properties dshow debug: MEDIATYPE_Audio dshow debug: selected audio pin accepts format: araw dshow debug: Crossbar at depth 0, Routed video ouput 0 to video input 1 dshow debug: Crossbar at depth 0, Routed audio ouput 1 to audio input 7 dshow debug: Playing... dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::SetSyncSource dshow debug: CaptureFilter::SetSyncSource dshow debug: CaptureFilter::Pause dshow debug: CaptureFilter::Pause dshow debug: CaptureFilter::Run dshow debug: CaptureFilter::Run main debug: Selecting program id=0 main debug: using access_demux module "dshow" main debug: looking for decoder module main debug: probing 23 candidates main debug: using decoder module "rawvideo" main debug: thread 3940 (decoder) created at priority 0 (src/input/decoder.c:157) main debug: looking for decoder module main debug: probing 23 candidates araw debug: samplerate:44100Hz channels:2 bits/sample:16 main debug: using decoder module "araw" main debug: thread 3960 (decoder) created at priority 2 (src/input/decoder.c:157) main debug: `dshow://' sucessfully opened main debug: no usable vout present, spawning one main debug: looking for video output module main debug: probing 5 candidates vout_directx debug: creating DirectXEventThread main debug: waiting for thread completion vout_directx debug: DirectXCreateWindow main debug: Registering subpicture channel, ID: 2 main debug: Registering subpicture channel, ID: 3 main debug: Registering subpicture channel, ID: 4 main debug: Registering subpicture channel, ID: 5 vout_directx debug: Created video sub-window main debug: thread 4012 (DirectX Events Thread) created at priority 0 (directx.c:248) vout_directx debug: DirectXEventThread running vout_directx debug: DirectXInitDDraw vout_directx debug: directx-device: vout_directx debug: DirectXEnumCallback: Primrer Anzeigetreiber, display vout_directx debug: DirectXEnumCallback: NVIDIA GeForce FX 5200, \\.\DISPLAY2 vout_directx debug: selecting NVIDIA GeForce FX 5200, \\.\DISPLAY2 vout_directx debug: screen dimensions (0x0,1024x768) vout_directx debug: DirectDraw Capabilities: overlay=1 yuvoverlay=1 can_deinterlace_overlay=1 colorkey=1 stretch=1 bltfourcc=1 vout_directx debug: align_boundary_src=0,0 align_boundary_dest=1,1 align_size_src=0,0 align_size_dest=0,0 vout_directx debug: End DirectXInitDDraw vout_directx debug: DirectXCreateDisplay vout_directx debug: DirectXCreateClipper main debug: no aout present, spawning one main debug: looking for audio output module main debug: probing 3 candidates aout_directx debug: OpenAudio main debug: using video output module "vout_directx" vout_directx debug: NewPictureVec overlay:yes chroma:YV12 main debug: waiting for thread completion aout_directx debug: device supports 2 channels aout_directx debug: device supports 1 channel aout_directx debug: creating DirectSoundThread main debug: thread 4480 (DirectSound Notification Thread) created at priority 15 (directx.c:357) aout_directx debug: DirectSoundThread ready main debug: using audio output module "aout_directx" main debug: output 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes main debug: mixer 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes main debug: no need for any filter main debug: looking for audio mixer module main debug: probing 3 candidates main debug: using audio mixer module "trivial_mixer" main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: filter(s) 's16l'->'fl32' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module main debug: probing 23 candidates main debug: using audio filter module "s16tofloat32" main debug: found a filter for the whole conversion main debug: filter(s) 'fl32'->'fl32' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module main debug: probing 23 candidates main debug: using audio filter module "bandlimited_resampler" main debug: found a filter for the whole conversion main warning: PTS is out of range (7344912249), dropping buffer main warning: PTS is out of range (7344889052), dropping buffer main warning: PTS is out of range (7344865850), dropping buffer main warning: PTS is out of range (7344842653), dropping buffer main warning: PTS is out of range (7344819452), dropping buffer vout_directx debug: YUV overlay created successfully vout_directx debug: End NewPictureVec (succeeded) main debug: got 1 direct buffer(s) main debug: picture in 320x240, chroma 0x30323449 (I420), aspect ratio 4:3 main debug: picture out 320x240, chroma 0x30323449 (I420), aspect ratio 4:3 main debug: direct render, mapping render pictures 0-6 to system pictures 1-7 main debug: thread 4356 (video output) created at priority 1 (src/video_output/video_output.c:443) main warning: late picture skipped (10815) main warning: buffer is 45430 late, triggering upsampling main warning: timing screwed, stopping resampling main warning: buffer is 69985 late, triggering upsampling main warning: timing screwed, stopping resampling main warning: buffer is 107450 late, triggering upsampling main warning: audio drift is too big (120545), dropping buffer main warning: audio drift is too big (134766), dropping buffer main warning: audio drift is too big (130641), dropping buffer main warning: audio drift is too big (126859), dropping buffer main warning: audio drift is too big (121448), dropping buffer main warning: audio drift is too big (123333), dropping buffer main warning: audio drift is too big (125389), dropping buffer -- This is the vlc mailing-list, see http://www.videolan.org/vlc/ To unsubscribe, please read http://www.videolan.org/support/lists.html