[Android] [PATCH 1/4] Add missing hardware headers for gingerbread
Martin Storsjö
martin at martin.st
Fri Jul 25 00:38:53 CEST 2014
From: Thomas Guillem <guillem at archos.com>
This allows building most of the iomx hwbuffer code for gingerbread
as well, even though it's not hooked up completely yet.
---
.../libhardware/include/hardware/copybit.h | 219 +++++++
.../hardware/libhardware/include/hardware/gps.h | 666 +++++++++++++++++++++
.../libhardware/include/hardware/gralloc.h | 351 +++++++++++
.../libhardware/include/hardware/hardware.h | 205 +++++++
.../hardware/libhardware/include/hardware/lights.h | 137 +++++
.../libhardware/include/hardware/overlay.h | 243 ++++++++
.../hardware/libhardware/include/hardware/qemud.h | 144 +++++
.../libhardware/include/hardware/sensors.h | 448 ++++++++++++++
.../include/hardware/sensors_deprecated.h | 75 +++
9 files changed, 2488 insertions(+)
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/copybit.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/gps.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/gralloc.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/hardware.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/lights.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/overlay.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/qemud.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/sensors.h
create mode 100644 android-headers-gingerbread/hardware/libhardware/include/hardware/sensors_deprecated.h
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/copybit.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/copybit.h
new file mode 100644
index 0000000..b6302c3
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/copybit.h
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_COPYBIT_INTERFACE_H
+#define ANDROID_COPYBIT_INTERFACE_H
+
+#include <hardware/hardware.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define COPYBIT_HARDWARE_MODULE_ID "copybit"
+
+/**
+ * Name of the graphics device to open
+ */
+#define COPYBIT_HARDWARE_COPYBIT0 "copybit0"
+
+/* supported pixel-formats. these must be compatible with
+ * graphics/PixelFormat.java, ui/PixelFormat.h, pixelflinger/format.h
+ */
+enum {
+ COPYBIT_FORMAT_RGBA_8888 = HAL_PIXEL_FORMAT_RGBA_8888,
+ COPYBIT_FORMAT_RGBX_8888 = HAL_PIXEL_FORMAT_RGBX_8888,
+ COPYBIT_FORMAT_RGB_888 = HAL_PIXEL_FORMAT_RGB_888,
+ COPYBIT_FORMAT_RGB_565 = HAL_PIXEL_FORMAT_RGB_565,
+ COPYBIT_FORMAT_BGRA_8888 = HAL_PIXEL_FORMAT_BGRA_8888,
+ COPYBIT_FORMAT_RGBA_5551 = HAL_PIXEL_FORMAT_RGBA_5551,
+ COPYBIT_FORMAT_RGBA_4444 = HAL_PIXEL_FORMAT_RGBA_4444,
+ COPYBIT_FORMAT_YCbCr_422_SP = 0x10,
+ COPYBIT_FORMAT_YCrCb_420_SP = 0x11,
+};
+
+/* name for copybit_set_parameter */
+enum {
+ /* rotation of the source image in degrees (0 to 359) */
+ COPYBIT_ROTATION_DEG = 1,
+ /* plane alpha value */
+ COPYBIT_PLANE_ALPHA = 2,
+ /* enable or disable dithering */
+ COPYBIT_DITHER = 3,
+ /* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
+ COPYBIT_TRANSFORM = 4,
+ /* blurs the copied bitmap. The amount of blurring cannot be changed
+ * at this time. */
+ COPYBIT_BLUR = 5
+};
+
+/* values for copybit_set_parameter(COPYBIT_TRANSFORM) */
+enum {
+ /* flip source image horizontally */
+ COPYBIT_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H,
+ /* flip source image vertically */
+ COPYBIT_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
+ /* rotate source image 90 degres */
+ COPYBIT_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
+ /* rotate source image 180 degres */
+ COPYBIT_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
+ /* rotate source image 270 degres */
+ COPYBIT_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
+};
+
+/* enable/disable value copybit_set_parameter */
+enum {
+ COPYBIT_DISABLE = 0,
+ COPYBIT_ENABLE = 1
+};
+
+/* use get_static_info() to query static informations about the hardware */
+enum {
+ /* Maximum amount of minification supported by the hardware*/
+ COPYBIT_MINIFICATION_LIMIT = 1,
+ /* Maximum amount of magnification supported by the hardware */
+ COPYBIT_MAGNIFICATION_LIMIT = 2,
+ /* Number of fractional bits support by the scaling engine */
+ COPYBIT_SCALING_FRAC_BITS = 3,
+ /* Supported rotation step in degres. */
+ COPYBIT_ROTATION_STEP_DEG = 4,
+};
+
+/* Image structure */
+struct copybit_image_t {
+ /* width */
+ uint32_t w;
+ /* height */
+ uint32_t h;
+ /* format COPYBIT_FORMAT_xxx */
+ int32_t format;
+ /* base of buffer with image */
+ void *base;
+ /* handle to the image */
+ native_handle_t* handle;
+};
+
+/* Rectangle */
+struct copybit_rect_t {
+ /* left */
+ int l;
+ /* top */
+ int t;
+ /* right */
+ int r;
+ /* bottom */
+ int b;
+};
+
+/* Region */
+struct copybit_region_t {
+ int (*next)(struct copybit_region_t const *region, struct copybit_rect_t *rect);
+};
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+struct copybit_module_t {
+ struct hw_module_t common;
+};
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+struct copybit_device_t {
+ struct hw_device_t common;
+
+ /**
+ * Set a copybit parameter.
+ *
+ * @param dev from open
+ * @param name one for the COPYBIT_NAME_xxx
+ * @param value one of the COPYBIT_VALUE_xxx
+ *
+ * @return 0 if successful
+ */
+ int (*set_parameter)(struct copybit_device_t *dev, int name, int value);
+
+ /**
+ * Get a static copybit information.
+ *
+ * @param dev from open
+ * @param name one of the COPYBIT_STATIC_xxx
+ *
+ * @return value or -EINVAL if error
+ */
+ int (*get)(struct copybit_device_t *dev, int name);
+
+ /**
+ * Execute the bit blit copy operation
+ *
+ * @param dev from open
+ * @param dst is the destination image
+ * @param src is the source image
+ * @param region the clip region
+ *
+ * @return 0 if successful
+ */
+ int (*blit)(struct copybit_device_t *dev,
+ struct copybit_image_t const *dst,
+ struct copybit_image_t const *src,
+ struct copybit_region_t const *region);
+
+ /**
+ * Execute the stretch bit blit copy operation
+ *
+ * @param dev from open
+ * @param dst is the destination image
+ * @param src is the source image
+ * @param dst_rect is the destination rectangle
+ * @param src_rect is the source rectangle
+ * @param region the clip region
+ *
+ * @return 0 if successful
+ */
+ int (*stretch)(struct copybit_device_t *dev,
+ struct copybit_image_t const *dst,
+ struct copybit_image_t const *src,
+ struct copybit_rect_t const *dst_rect,
+ struct copybit_rect_t const *src_rect,
+ struct copybit_region_t const *region);
+};
+
+
+/** convenience API for opening and closing a device */
+
+static inline int copybit_open(const struct hw_module_t* module,
+ struct copybit_device_t** device) {
+ return module->methods->open(module,
+ COPYBIT_HARDWARE_COPYBIT0, (struct hw_device_t**)device);
+}
+
+static inline int copybit_close(struct copybit_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+
+__END_DECLS
+
+#endif // ANDROID_COPYBIT_INTERFACE_H
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/gps.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/gps.h
new file mode 100644
index 0000000..235c72d
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/gps.h
@@ -0,0 +1,666 @@
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_GPS_H
+#define ANDROID_INCLUDE_HARDWARE_GPS_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+#include <pthread.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define GPS_HARDWARE_MODULE_ID "gps"
+
+
+/** Milliseconds since January 1, 1970 */
+typedef int64_t GpsUtcTime;
+
+/** Maximum number of SVs for gps_sv_status_callback(). */
+#define GPS_MAX_SVS 32
+
+/** Requested operational mode for GPS operation. */
+typedef uint32_t GpsPositionMode;
+// IMPORTANT: Note that the following values must match
+// constants in GpsLocationProvider.java.
+/** Mode for running GPS standalone (no assistance). */
+#define GPS_POSITION_MODE_STANDALONE 0
+/** AGPS MS-Based mode. */
+#define GPS_POSITION_MODE_MS_BASED 1
+/** AGPS MS-Assisted mode. */
+#define GPS_POSITION_MODE_MS_ASSISTED 2
+
+/** Requested recurrence mode for GPS operation. */
+typedef uint32_t GpsPositionRecurrence;
+// IMPORTANT: Note that the following values must match
+// constants in GpsLocationProvider.java.
+/** Receive GPS fixes on a recurring basis at a specified period. */
+#define GPS_POSITION_RECURRENCE_PERIODIC 0
+/** Request a single shot GPS fix. */
+#define GPS_POSITION_RECURRENCE_SINGLE 1
+
+/** GPS status event values. */
+typedef uint16_t GpsStatusValue;
+// IMPORTANT: Note that the following values must match
+// constants in GpsLocationProvider.java.
+/** GPS status unknown. */
+#define GPS_STATUS_NONE 0
+/** GPS has begun navigating. */
+#define GPS_STATUS_SESSION_BEGIN 1
+/** GPS has stopped navigating. */
+#define GPS_STATUS_SESSION_END 2
+/** GPS has powered on but is not navigating. */
+#define GPS_STATUS_ENGINE_ON 3
+/** GPS is powered off. */
+#define GPS_STATUS_ENGINE_OFF 4
+
+/** Flags to indicate which values are valid in a GpsLocation. */
+typedef uint16_t GpsLocationFlags;
+// IMPORTANT: Note that the following values must match
+// constants in GpsLocationProvider.java.
+/** GpsLocation has valid latitude and longitude. */
+#define GPS_LOCATION_HAS_LAT_LONG 0x0001
+/** GpsLocation has valid altitude. */
+#define GPS_LOCATION_HAS_ALTITUDE 0x0002
+/** GpsLocation has valid speed. */
+#define GPS_LOCATION_HAS_SPEED 0x0004
+/** GpsLocation has valid bearing. */
+#define GPS_LOCATION_HAS_BEARING 0x0008
+/** GpsLocation has valid accuracy. */
+#define GPS_LOCATION_HAS_ACCURACY 0x0010
+
+/** Flags for the gps_set_capabilities callback. */
+
+/** GPS HAL schedules fixes for GPS_POSITION_RECURRENCE_PERIODIC mode.
+ If this is not set, then the framework will use 1000ms for min_interval
+ and will start and call start() and stop() to schedule the GPS.
+ */
+#define GPS_CAPABILITY_SCHEDULING 0x0000001
+/** GPS supports MS-Based AGPS mode */
+#define GPS_CAPABILITY_MSB 0x0000002
+/** GPS supports MS-Assisted AGPS mode */
+#define GPS_CAPABILITY_MSA 0x0000004
+/** GPS supports single-shot fixes */
+#define GPS_CAPABILITY_SINGLE_SHOT 0x0000008
+
+/** Flags used to specify which aiding data to delete
+ when calling delete_aiding_data(). */
+typedef uint16_t GpsAidingData;
+// IMPORTANT: Note that the following values must match
+// constants in GpsLocationProvider.java.
+#define GPS_DELETE_EPHEMERIS 0x0001
+#define GPS_DELETE_ALMANAC 0x0002
+#define GPS_DELETE_POSITION 0x0004
+#define GPS_DELETE_TIME 0x0008
+#define GPS_DELETE_IONO 0x0010
+#define GPS_DELETE_UTC 0x0020
+#define GPS_DELETE_HEALTH 0x0040
+#define GPS_DELETE_SVDIR 0x0080
+#define GPS_DELETE_SVSTEER 0x0100
+#define GPS_DELETE_SADATA 0x0200
+#define GPS_DELETE_RTI 0x0400
+#define GPS_DELETE_CELLDB_INFO 0x8000
+#define GPS_DELETE_ALL 0xFFFF
+
+/** AGPS type */
+typedef uint16_t AGpsType;
+#define AGPS_TYPE_SUPL 1
+#define AGPS_TYPE_C2K 2
+
+typedef uint16_t AGpsSetIDType;
+#define AGPS_SETID_TYPE_NONE 0
+#define AGPS_SETID_TYPE_IMSI 1
+#define AGPS_SETID_TYPE_MSISDN 2
+
+/**
+ * String length constants
+ */
+#define GPS_NI_SHORT_STRING_MAXLEN 256
+#define GPS_NI_LONG_STRING_MAXLEN 2048
+
+/**
+ * GpsNiType constants
+ */
+typedef uint32_t GpsNiType;
+#define GPS_NI_TYPE_VOICE 1
+#define GPS_NI_TYPE_UMTS_SUPL 2
+#define GPS_NI_TYPE_UMTS_CTRL_PLANE 3
+
+/**
+ * GpsNiNotifyFlags constants
+ */
+typedef uint32_t GpsNiNotifyFlags;
+/** NI requires notification */
+#define GPS_NI_NEED_NOTIFY 0x0001
+/** NI requires verification */
+#define GPS_NI_NEED_VERIFY 0x0002
+/** NI requires privacy override, no notification/minimal trace */
+#define GPS_NI_PRIVACY_OVERRIDE 0x0004
+
+/**
+ * GPS NI responses, used to define the response in
+ * NI structures
+ */
+typedef int GpsUserResponseType;
+#define GPS_NI_RESPONSE_ACCEPT 1
+#define GPS_NI_RESPONSE_DENY 2
+#define GPS_NI_RESPONSE_NORESP 3
+
+/**
+ * NI data encoding scheme
+ */
+typedef int GpsNiEncodingType;
+#define GPS_ENC_NONE 0
+#define GPS_ENC_SUPL_GSM_DEFAULT 1
+#define GPS_ENC_SUPL_UTF8 2
+#define GPS_ENC_SUPL_UCS2 3
+#define GPS_ENC_UNKNOWN -1
+
+/** AGPS status event values. */
+typedef uint16_t AGpsStatusValue;
+/** GPS requests data connection for AGPS. */
+#define GPS_REQUEST_AGPS_DATA_CONN 1
+/** GPS releases the AGPS data connection. */
+#define GPS_RELEASE_AGPS_DATA_CONN 2
+/** AGPS data connection initiated */
+#define GPS_AGPS_DATA_CONNECTED 3
+/** AGPS data connection completed */
+#define GPS_AGPS_DATA_CONN_DONE 4
+/** AGPS data connection failed */
+#define GPS_AGPS_DATA_CONN_FAILED 5
+
+#define AGPS_REF_LOCATION_TYPE_GSM_CELLID 1
+#define AGPS_REF_LOCATION_TYPE_UMTS_CELLID 2
+#define AGPS_REG_LOCATION_TYPE_MAC 3
+
+/** Network types for update_network_state "type" parameter */
+#define AGPS_RIL_NETWORK_TYPE_MOBILE 0
+#define AGPS_RIL_NETWORK_TYPE_WIFI 1
+#define AGPS_RIL_NETWORK_TYPE_MOBILE_MMS 2
+#define AGPS_RIL_NETWORK_TYPE_MOBILE_SUPL 3
+#define AGPS_RIL_NETWORK_TTYPE_MOBILE_DUN 4
+#define AGPS_RIL_NETWORK_TTYPE_MOBILE_HIPRI 5
+#define AGPS_RIL_NETWORK_TTYPE_WIMAX 6
+
+/**
+ * Name for the GPS XTRA interface.
+ */
+#define GPS_XTRA_INTERFACE "gps-xtra"
+
+/**
+ * Name for the GPS DEBUG interface.
+ */
+#define GPS_DEBUG_INTERFACE "gps-debug"
+
+/**
+ * Name for the AGPS interface.
+ */
+#define AGPS_INTERFACE "agps"
+
+/**
+ * Name for NI interface
+ */
+#define GPS_NI_INTERFACE "gps-ni"
+
+/**
+ * Name for the AGPS-RIL interface.
+ */
+#define AGPS_RIL_INTERFACE "agps_ril"
+
+/** Represents a location. */
+typedef struct {
+ /** set to sizeof(GpsLocation) */
+ size_t size;
+ /** Contains GpsLocationFlags bits. */
+ uint16_t flags;
+ /** Represents latitude in degrees. */
+ double latitude;
+ /** Represents longitude in degrees. */
+ double longitude;
+ /** Represents altitude in meters above the WGS 84 reference
+ * ellipsoid. */
+ double altitude;
+ /** Represents speed in meters per second. */
+ float speed;
+ /** Represents heading in degrees. */
+ float bearing;
+ /** Represents expected accuracy in meters. */
+ float accuracy;
+ /** Timestamp for the location fix. */
+ GpsUtcTime timestamp;
+} GpsLocation;
+
+/** Represents the status. */
+typedef struct {
+ /** set to sizeof(GpsStatus) */
+ size_t size;
+ GpsStatusValue status;
+} GpsStatus;
+
+/** Represents SV information. */
+typedef struct {
+ /** set to sizeof(GpsSvInfo) */
+ size_t size;
+ /** Pseudo-random number for the SV. */
+ int prn;
+ /** Signal to noise ratio. */
+ float snr;
+ /** Elevation of SV in degrees. */
+ float elevation;
+ /** Azimuth of SV in degrees. */
+ float azimuth;
+} GpsSvInfo;
+
+/** Represents SV status. */
+typedef struct {
+ /** set to sizeof(GpsSvStatus) */
+ size_t size;
+
+ /** Number of SVs currently visible. */
+ int num_svs;
+
+ /** Contains an array of SV information. */
+ GpsSvInfo sv_list[GPS_MAX_SVS];
+
+ /** Represents a bit mask indicating which SVs
+ * have ephemeris data.
+ */
+ uint32_t ephemeris_mask;
+
+ /** Represents a bit mask indicating which SVs
+ * have almanac data.
+ */
+ uint32_t almanac_mask;
+
+ /**
+ * Represents a bit mask indicating which SVs
+ * were used for computing the most recent position fix.
+ */
+ uint32_t used_in_fix_mask;
+} GpsSvStatus;
+
+/* 2G and 3G */
+/* In 3G lac is discarded */
+typedef struct {
+ uint16_t type;
+ uint16_t mcc;
+ uint16_t mnc;
+ uint16_t lac;
+ uint32_t cid;
+} AGpsRefLocationCellID;
+
+typedef struct {
+ uint8_t mac[6];
+} AGpsRefLocationMac;
+
+/** Represents ref locations */
+typedef struct {
+ uint16_t type;
+ union {
+ AGpsRefLocationCellID cellID;
+ AGpsRefLocationMac mac;
+ } u;
+} AGpsRefLocation;
+
+/** Callback with location information.
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (* gps_location_callback)(GpsLocation* location);
+
+/** Callback with status information.
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (* gps_status_callback)(GpsStatus* status);
+
+/** Callback with SV status information.
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (* gps_sv_status_callback)(GpsSvStatus* sv_info);
+
+/** Callback for reporting NMEA sentences.
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (* gps_nmea_callback)(GpsUtcTime timestamp, const char* nmea, int length);
+
+/** Callback to inform framework of the GPS engine's capabilities.
+ * Capability parameter is a bit field of GPS_CAPABILITY_* flags.
+ */
+typedef void (* gps_set_capabilities)(uint32_t capabilities);
+
+/** Callback utility for acquiring the GPS wakelock.
+ * This can be used to prevent the CPU from suspending while handling GPS events.
+ */
+typedef void (* gps_acquire_wakelock)();
+
+/** Callback utility for releasing the GPS wakelock. */
+typedef void (* gps_release_wakelock)();
+
+/** Callback for creating a thread that can call into the Java framework code.
+ * This must be used to create any threads that report events up to the framework.
+ */
+typedef pthread_t (* gps_create_thread)(const char* name, void (*start)(void *), void* arg);
+
+/** GPS callback structure. */
+typedef struct {
+ /** set to sizeof(GpsCallbacks) */
+ size_t size;
+ gps_location_callback location_cb;
+ gps_status_callback status_cb;
+ gps_sv_status_callback sv_status_cb;
+ gps_nmea_callback nmea_cb;
+ gps_set_capabilities set_capabilities_cb;
+ gps_acquire_wakelock acquire_wakelock_cb;
+ gps_release_wakelock release_wakelock_cb;
+ gps_create_thread create_thread_cb;
+} GpsCallbacks;
+
+
+/** Represents the standard GPS interface. */
+typedef struct {
+ /** set to sizeof(GpsInterface) */
+ size_t size;
+ /**
+ * Opens the interface and provides the callback routines
+ * to the implemenation of this interface.
+ */
+ int (*init)( GpsCallbacks* callbacks );
+
+ /** Starts navigating. */
+ int (*start)( void );
+
+ /** Stops navigating. */
+ int (*stop)( void );
+
+ /** Closes the interface. */
+ void (*cleanup)( void );
+
+ /** Injects the current time. */
+ int (*inject_time)(GpsUtcTime time, int64_t timeReference,
+ int uncertainty);
+
+ /** Injects current location from another location provider
+ * (typically cell ID).
+ * latitude and longitude are measured in degrees
+ * expected accuracy is measured in meters
+ */
+ int (*inject_location)(double latitude, double longitude, float accuracy);
+
+ /**
+ * Specifies that the next call to start will not use the
+ * information defined in the flags. GPS_DELETE_ALL is passed for
+ * a cold start.
+ */
+ void (*delete_aiding_data)(GpsAidingData flags);
+
+ /**
+ * min_interval represents the time between fixes in milliseconds.
+ * preferred_accuracy represents the requested fix accuracy in meters.
+ * preferred_time represents the requested time to first fix in milliseconds.
+ */
+ int (*set_position_mode)(GpsPositionMode mode, GpsPositionRecurrence recurrence,
+ uint32_t min_interval, uint32_t preferred_accuracy, uint32_t preferred_time);
+
+ /** Get a pointer to extension information. */
+ const void* (*get_extension)(const char* name);
+} GpsInterface;
+
+/** Callback to request the client to download XTRA data.
+ * The client should download XTRA data and inject it by calling inject_xtra_data().
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (* gps_xtra_download_request)();
+
+/** Callback structure for the XTRA interface. */
+typedef struct {
+ gps_xtra_download_request download_request_cb;
+ gps_create_thread create_thread_cb;
+} GpsXtraCallbacks;
+
+/** Extended interface for XTRA support. */
+typedef struct {
+ /** set to sizeof(GpsXtraInterface) */
+ size_t size;
+ /**
+ * Opens the XTRA interface and provides the callback routines
+ * to the implemenation of this interface.
+ */
+ int (*init)( GpsXtraCallbacks* callbacks );
+ /** Injects XTRA data into the GPS. */
+ int (*inject_xtra_data)( char* data, int length );
+} GpsXtraInterface;
+
+/** Extended interface for DEBUG support. */
+typedef struct {
+ /** set to sizeof(GpsDebugInterface) */
+ size_t size;
+
+ /**
+ * This function should return any information that the native
+ * implementation wishes to include in a bugreport.
+ */
+ size_t (*get_internal_state)(char* buffer, size_t bufferSize);
+} GpsDebugInterface;
+
+/** Represents the status of AGPS. */
+typedef struct {
+ /** set to sizeof(AGpsStatus) */
+ size_t size;
+
+ AGpsType type;
+ AGpsStatusValue status;
+} AGpsStatus;
+
+/** Callback with AGPS status information.
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (* agps_status_callback)(AGpsStatus* status);
+
+/** Callback structure for the AGPS interface. */
+typedef struct {
+ agps_status_callback status_cb;
+ gps_create_thread create_thread_cb;
+} AGpsCallbacks;
+
+
+/** Extended interface for AGPS support. */
+typedef struct {
+ /** set to sizeof(AGpsInterface) */
+ size_t size;
+
+ /**
+ * Opens the AGPS interface and provides the callback routines
+ * to the implemenation of this interface.
+ */
+ void (*init)( AGpsCallbacks* callbacks );
+ /**
+ * Notifies that a data connection is available and sets
+ * the name of the APN to be used for SUPL.
+ */
+ int (*data_conn_open)( const char* apn );
+ /**
+ * Notifies that the AGPS data connection has been closed.
+ */
+ int (*data_conn_closed)();
+ /**
+ * Notifies that a data connection is not available for AGPS.
+ */
+ int (*data_conn_failed)();
+ /**
+ * Sets the hostname and port for the AGPS server.
+ */
+ int (*set_server)( AGpsType type, const char* hostname, int port );
+} AGpsInterface;
+
+
+/** Represents an NI request */
+typedef struct {
+ /** set to sizeof(GpsNiNotification) */
+ size_t size;
+
+ /**
+ * An ID generated by HAL to associate NI notifications and UI
+ * responses
+ */
+ int notification_id;
+
+ /**
+ * An NI type used to distinguish different categories of NI
+ * events, such as GPS_NI_TYPE_VOICE, GPS_NI_TYPE_UMTS_SUPL, ...
+ */
+ GpsNiType ni_type;
+
+ /**
+ * Notification/verification options, combinations of GpsNiNotifyFlags constants
+ */
+ GpsNiNotifyFlags notify_flags;
+
+ /**
+ * Timeout period to wait for user response.
+ * Set to 0 for no time out limit.
+ */
+ int timeout;
+
+ /**
+ * Default response when time out.
+ */
+ GpsUserResponseType default_response;
+
+ /**
+ * Requestor ID
+ */
+ char requestor_id[GPS_NI_SHORT_STRING_MAXLEN];
+
+ /**
+ * Notification message. It can also be used to store client_id in some cases
+ */
+ char text[GPS_NI_LONG_STRING_MAXLEN];
+
+ /**
+ * Client name decoding scheme
+ */
+ GpsNiEncodingType requestor_id_encoding;
+
+ /**
+ * Client name decoding scheme
+ */
+ GpsNiEncodingType text_encoding;
+
+ /**
+ * A pointer to extra data. Format:
+ * key_1 = value_1
+ * key_2 = value_2
+ */
+ char extras[GPS_NI_LONG_STRING_MAXLEN];
+
+} GpsNiNotification;
+
+/** Callback with NI notification.
+ * Can only be called from a thread created by create_thread_cb.
+ */
+typedef void (*gps_ni_notify_callback)(GpsNiNotification *notification);
+
+/** GPS NI callback structure. */
+typedef struct
+{
+ /**
+ * Sends the notification request from HAL to GPSLocationProvider.
+ */
+ gps_ni_notify_callback notify_cb;
+ gps_create_thread create_thread_cb;
+} GpsNiCallbacks;
+
+/**
+ * Extended interface for Network-initiated (NI) support.
+ */
+typedef struct
+{
+ /** set to sizeof(GpsNiInterface) */
+ size_t size;
+
+ /** Registers the callbacks for HAL to use. */
+ void (*init) (GpsNiCallbacks *callbacks);
+
+ /** Sends a response to HAL. */
+ void (*respond) (int notif_id, GpsUserResponseType user_response);
+} GpsNiInterface;
+
+struct gps_device_t {
+ struct hw_device_t common;
+
+ /**
+ * Set the provided lights to the provided values.
+ *
+ * Returns: 0 on succes, error code on failure.
+ */
+ const GpsInterface* (*get_gps_interface)(struct gps_device_t* dev);
+};
+
+#define AGPS_RIL_REQUEST_SETID_IMSI (1<<0L)
+#define AGPS_RIL_REQUEST_SETID_MSISDN (1<<1L)
+
+#define AGPS_RIL_REQUEST_REFLOC_CELLID (1<<0L)
+#define AGPS_RIL_REQUEST_REFLOC_MAC (1<<1L)
+
+typedef void (*agps_ril_request_set_id)(uint32_t flags);
+typedef void (*agps_ril_request_ref_loc)(uint32_t flags);
+
+typedef struct {
+ agps_ril_request_set_id request_setid;
+ agps_ril_request_ref_loc request_refloc;
+ gps_create_thread create_thread_cb;
+} AGpsRilCallbacks;
+
+/** Extended interface for AGPS_RIL support. */
+typedef struct {
+ /** set to sizeof(AGpsRilInterface) */
+ size_t size;
+ /**
+ * Opens the AGPS interface and provides the callback routines
+ * to the implemenation of this interface.
+ */
+ void (*init)( AGpsRilCallbacks* callbacks );
+
+ /**
+ * Sets the reference location.
+ */
+ void (*set_ref_location) (const AGpsRefLocation *agps_reflocation, size_t sz_struct);
+ /**
+ * Sets the set ID.
+ */
+ void (*set_set_id) (AGpsSetIDType type, const char* setid);
+
+ /**
+ * Send network initiated message.
+ */
+ void (*ni_message) (uint8_t *msg, size_t len);
+
+ /**
+ * Notify GPS of network status changes.
+ * These parameters match values in the android.net.NetworkInfo class.
+ */
+ void (*update_network_state) (int connected, int type, int roaming, const char* extra_info);
+} AGpsRilInterface;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_GPS_H */
+
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/gralloc.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/gralloc.h
new file mode 100644
index 0000000..73cc9e0
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/gralloc.h
@@ -0,0 +1,351 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_GRALLOC_INTERFACE_H
+#define ANDROID_GRALLOC_INTERFACE_H
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
+
+/**
+ * Name of the graphics device to open
+ */
+
+#define GRALLOC_HARDWARE_FB0 "fb0"
+#define GRALLOC_HARDWARE_GPU0 "gpu0"
+
+enum {
+ /* buffer is never read in software */
+ GRALLOC_USAGE_SW_READ_NEVER = 0x00000000,
+ /* buffer is rarely read in software */
+ GRALLOC_USAGE_SW_READ_RARELY = 0x00000002,
+ /* buffer is often read in software */
+ GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003,
+ /* mask for the software read values */
+ GRALLOC_USAGE_SW_READ_MASK = 0x0000000F,
+
+ /* buffer is never written in software */
+ GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000,
+ /* buffer is never written in software */
+ GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020,
+ /* buffer is never written in software */
+ GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030,
+ /* mask for the software write values */
+ GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0,
+
+ /* buffer will be used as an OpenGL ES texture */
+ GRALLOC_USAGE_HW_TEXTURE = 0x00000100,
+ /* buffer will be used as an OpenGL ES render target */
+ GRALLOC_USAGE_HW_RENDER = 0x00000200,
+ /* buffer will be used by the 2D hardware blitter */
+ GRALLOC_USAGE_HW_2D = 0x00000400,
+ /* buffer will be used with the framebuffer device */
+ GRALLOC_USAGE_HW_FB = 0x00001000,
+ /* mask for the software usage bit-mask */
+ GRALLOC_USAGE_HW_MASK = 0x00001F00,
+
+ /* implementation-specific private usage flags */
+ GRALLOC_USAGE_PRIVATE_0 = 0x10000000,
+ GRALLOC_USAGE_PRIVATE_1 = 0x20000000,
+ GRALLOC_USAGE_PRIVATE_2 = 0x40000000,
+ GRALLOC_USAGE_PRIVATE_3 = 0x80000000,
+ GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000,
+};
+
+/*****************************************************************************/
+
+typedef const native_handle* buffer_handle_t;
+
+enum {
+ /* FIXME: this only exists to work-around some issues with
+ * the video and camera frameworks. don't implement unless
+ * you know what you're doing.
+ */
+ GRALLOC_MODULE_PERFORM_CREATE_HANDLE_FROM_BUFFER = 0x080000001,
+};
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct gralloc_module_t {
+ struct hw_module_t common;
+
+ /*
+ * (*registerBuffer)() must be called before a buffer_handle_t that has not
+ * been created with (*alloc_device_t::alloc)() can be used.
+ *
+ * This is intended to be used with buffer_handle_t's that have been
+ * received in this process through IPC.
+ *
+ * This function checks that the handle is indeed a valid one and prepares
+ * it for use with (*lock)() and (*unlock)().
+ *
+ * It is not necessary to call (*registerBuffer)() on a handle created
+ * with (*alloc_device_t::alloc)().
+ *
+ * returns an error if this buffer_handle_t is not valid.
+ */
+ int (*registerBuffer)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+ /*
+ * (*unregisterBuffer)() is called once this handle is no longer needed in
+ * this process. After this call, it is an error to call (*lock)(),
+ * (*unlock)(), or (*registerBuffer)().
+ *
+ * This function doesn't close or free the handle itself; this is done
+ * by other means, usually through libcutils's native_handle_close() and
+ * native_handle_free().
+ *
+ * It is an error to call (*unregisterBuffer)() on a buffer that wasn't
+ * explicitly registered first.
+ */
+ int (*unregisterBuffer)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+ /*
+ * The (*lock)() method is called before a buffer is accessed for the
+ * specified usage. This call may block, for instance if the h/w needs
+ * to finish rendering or if CPU caches need to be synchronized.
+ *
+ * The caller promises to modify only pixels in the area specified
+ * by (l,t,w,h).
+ *
+ * The content of the buffer outside of the specified area is NOT modified
+ * by this call.
+ *
+ * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address
+ * of the buffer in virtual memory.
+ *
+ * THREADING CONSIDERATIONS:
+ *
+ * It is legal for several different threads to lock a buffer from
+ * read access, none of the threads are blocked.
+ *
+ * However, locking a buffer simultaneously for write or read/write is
+ * undefined, but:
+ * - shall not result in termination of the process
+ * - shall not block the caller
+ * It is acceptable to return an error or to leave the buffer's content
+ * into an indeterminate state.
+ *
+ * If the buffer was created with a usage mask incompatible with the
+ * requested usage flags here, -EINVAL is returned.
+ *
+ */
+
+ int (*lock)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ void** vaddr);
+
+
+ /*
+ * The (*unlock)() method must be called after all changes to the buffer
+ * are completed.
+ */
+
+ int (*unlock)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+
+ /* reserved for future use */
+ int (*perform)(struct gralloc_module_t const* module,
+ int operation, ... );
+
+ /* reserved for future use */
+ void* reserved_proc[7];
+} gralloc_module_t;
+
+/*****************************************************************************/
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+
+typedef struct alloc_device_t {
+ struct hw_device_t common;
+
+ /*
+ * (*alloc)() Allocates a buffer in graphic memory with the requested
+ * parameters and returns a buffer_handle_t and the stride in pixels to
+ * allow the implementation to satisfy hardware constraints on the width
+ * of a pixmap (eg: it may have to be multiple of 8 pixels).
+ * The CALLER TAKES OWNERSHIP of the buffer_handle_t.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+
+ int (*alloc)(struct alloc_device_t* dev,
+ int w, int h, int format, int usage,
+ buffer_handle_t* handle, int* stride);
+
+ /*
+ * (*free)() Frees a previously allocated buffer.
+ * Behavior is undefined if the buffer is still mapped in any process,
+ * but shall not result in termination of the program or security breaches
+ * (allowing a process to get access to another process' buffers).
+ * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes
+ * invalid after the call.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*free)(struct alloc_device_t* dev,
+ buffer_handle_t handle);
+
+} alloc_device_t;
+
+
+typedef struct framebuffer_device_t {
+ struct hw_device_t common;
+
+ /* flags describing some attributes of the framebuffer */
+ const uint32_t flags;
+
+ /* dimensions of the framebuffer in pixels */
+ const uint32_t width;
+ const uint32_t height;
+
+ /* frambuffer stride in pixels */
+ const int stride;
+
+ /* framebuffer pixel format */
+ const int format;
+
+ /* resolution of the framebuffer's display panel in pixel per inch*/
+ const float xdpi;
+ const float ydpi;
+
+ /* framebuffer's display panel refresh rate in frames per second */
+ const float fps;
+
+ /* min swap interval supported by this framebuffer */
+ const int minSwapInterval;
+
+ /* max swap interval supported by this framebuffer */
+ const int maxSwapInterval;
+
+ int reserved[8];
+
+ /*
+ * requests a specific swap-interval (same definition than EGL)
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*setSwapInterval)(struct framebuffer_device_t* window,
+ int interval);
+
+ /*
+ * This hook is OPTIONAL.
+ *
+ * It is non NULL If the framebuffer driver supports "update-on-demand"
+ * and the given rectangle is the area of the screen that gets
+ * updated during (*post)().
+ *
+ * This is useful on devices that are able to DMA only a portion of
+ * the screen to the display panel, upon demand -- as opposed to
+ * constantly refreshing the panel 60 times per second, for instance.
+ *
+ * Only the area defined by this rectangle is guaranteed to be valid, that
+ * is, the driver is not allowed to post anything outside of this
+ * rectangle.
+ *
+ * The rectangle evaluated during (*post)() and specifies which area
+ * of the buffer passed in (*post)() shall to be posted.
+ *
+ * return -EINVAL if width or height <=0, or if left or top < 0
+ */
+ int (*setUpdateRect)(struct framebuffer_device_t* window,
+ int left, int top, int width, int height);
+
+ /*
+ * Post <buffer> to the display (display it on the screen)
+ * The buffer must have been allocated with the
+ * GRALLOC_USAGE_HW_FB usage flag.
+ * buffer must be the same width and height as the display and must NOT
+ * be locked.
+ *
+ * The buffer is shown during the next VSYNC.
+ *
+ * If the same buffer is posted again (possibly after some other buffer),
+ * post() will block until the the first post is completed.
+ *
+ * Internally, post() is expected to lock the buffer so that a
+ * subsequent call to gralloc_module_t::(*lock)() with USAGE_RENDER or
+ * USAGE_*_WRITE will block until it is safe; that is typically once this
+ * buffer is shown and another buffer has been posted.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*post)(struct framebuffer_device_t* dev, buffer_handle_t buffer);
+
+
+ /*
+ * The (*compositionComplete)() method must be called after the
+ * compositor has finished issuing GL commands for client buffers.
+ */
+
+ int (*compositionComplete)(struct framebuffer_device_t* dev);
+
+
+ void* reserved_proc[8];
+
+} framebuffer_device_t;
+
+
+/** convenience API for opening and closing a supported device */
+
+static inline int gralloc_open(const struct hw_module_t* module,
+ struct alloc_device_t** device) {
+ return module->methods->open(module,
+ GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device);
+}
+
+static inline int gralloc_close(struct alloc_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+
+static inline int framebuffer_open(const struct hw_module_t* module,
+ struct framebuffer_device_t** device) {
+ return module->methods->open(module,
+ GRALLOC_HARDWARE_FB0, (struct hw_device_t**)device);
+}
+
+static inline int framebuffer_close(struct framebuffer_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+
+__END_DECLS
+
+#endif // ANDROID_ALLOC_INTERFACE_H
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/hardware.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/hardware.h
new file mode 100644
index 0000000..d9cc0dc
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/hardware.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+
+#include <cutils/native_handle.h>
+
+__BEGIN_DECLS
+
+/*
+ * Value for the hw_module_t.tag field
+ */
+
+#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D))
+
+#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T')
+#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T')
+
+struct hw_module_t;
+struct hw_module_methods_t;
+struct hw_device_t;
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct hw_module_t {
+ /** tag must be initialized to HARDWARE_MODULE_TAG */
+ uint32_t tag;
+
+ /** major version number for the module */
+ uint16_t version_major;
+
+ /** minor version number of the module */
+ uint16_t version_minor;
+
+ /** Identifier of module */
+ const char *id;
+
+ /** Name of this module */
+ const char *name;
+
+ /** Author/owner/implementor of the module */
+ const char *author;
+
+ /** Modules methods */
+ struct hw_module_methods_t* methods;
+
+ /** module's dso */
+ void* dso;
+
+ /** padding to 128 bytes, reserved for future use */
+ uint32_t reserved[32-7];
+
+} hw_module_t;
+
+typedef struct hw_module_methods_t {
+ /** Open a specific device */
+ int (*open)(const struct hw_module_t* module, const char* id,
+ struct hw_device_t** device);
+
+} hw_module_methods_t;
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+typedef struct hw_device_t {
+ /** tag must be initialized to HARDWARE_DEVICE_TAG */
+ uint32_t tag;
+
+ /** version number for hw_device_t */
+ uint32_t version;
+
+ /** reference to the module this device belongs to */
+ struct hw_module_t* module;
+
+ /** padding reserved for future use */
+ uint32_t reserved[12];
+
+ /** Close this device */
+ int (*close)(struct hw_device_t* device);
+
+} hw_device_t;
+
+/**
+ * Name of the hal_module_info
+ */
+#define HAL_MODULE_INFO_SYM HMI
+
+/**
+ * Name of the hal_module_info as a string
+ */
+#define HAL_MODULE_INFO_SYM_AS_STR "HMI"
+
+/**
+ * Get the module info associated with a module by id.
+ * @return: 0 == success, <0 == error and *pHmi == NULL
+ */
+int hw_get_module(const char *id, const struct hw_module_t **module);
+
+
+/**
+ * pixel format definitions
+ */
+
+enum {
+ HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+ HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+ HAL_PIXEL_FORMAT_RGB_888 = 3,
+ HAL_PIXEL_FORMAT_RGB_565 = 4,
+ HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+ HAL_PIXEL_FORMAT_RGBA_5551 = 6,
+ HAL_PIXEL_FORMAT_RGBA_4444 = 7,
+
+ /* 0x8 - 0xFF range unavailable */
+
+ /*
+ * 0x100 - 0x1FF
+ *
+ * This range is reserved for pixel formats that are specific to the HAL
+ * implementation. Implementations can use any value in this range to
+ * communicate video pixel formats between their HAL modules. These formats
+ * must not have an alpha channel. Additionally, an EGLimage created from a
+ * gralloc buffer of one of these formats must be supported for use with the
+ * GL_OES_EGL_image_external OpenGL ES extension.
+ */
+
+ /*
+ * Android YUV format:
+ *
+ * This format is exposed outside of the HAL to software
+ * decoders and applications.
+ * EGLImageKHR must support it in conjunction with the
+ * OES_EGL_image_external extension.
+ *
+ * YV12 is 4:2:0 YCrCb planar format comprised of a WxH Y plane followed
+ * by (W/2) x (H/2) Cr and Cb planes.
+ *
+ * This format assumes
+ * - an even width
+ * - an even height
+ * - a horizontal stride multiple of 16 pixels
+ * - a vertical stride equal to the height
+ *
+ * y_size = stride * height
+ * c_size = ALIGN(stride/2, 16) * height/2
+ * size = y_size + c_size * 2
+ * cr_offset = y_size
+ * cb_offset = y_size + c_size
+ *
+ */
+ HAL_PIXEL_FORMAT_YV12 = 0x32315659, // YCrCb 4:2:0 Planar
+
+
+
+ /* Legacy formats (deprecated), used by ImageFormat.java */
+ HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10, // NV16
+ HAL_PIXEL_FORMAT_YCrCb_420_SP = 0x11, // NV21
+ HAL_PIXEL_FORMAT_YCbCr_422_I = 0x14, // YUY2
+};
+
+
+/**
+ * Transformation definitions
+ *
+ * IMPORTANT NOTE:
+ * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}.
+ *
+ */
+
+enum {
+ /* flip source image horizontally (around the vertical axis) */
+ HAL_TRANSFORM_FLIP_H = 0x01,
+ /* flip source image vertically (around the horizontal axis)*/
+ HAL_TRANSFORM_FLIP_V = 0x02,
+ /* rotate source image 90 degrees clockwise */
+ HAL_TRANSFORM_ROT_90 = 0x04,
+ /* rotate source image 180 degrees */
+ HAL_TRANSFORM_ROT_180 = 0x03,
+ /* rotate source image 270 degrees clockwise */
+ HAL_TRANSFORM_ROT_270 = 0x07,
+};
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/lights.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/lights.h
new file mode 100644
index 0000000..2cf5519
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/lights.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_LIGHTS_INTERFACE_H
+#define ANDROID_LIGHTS_INTERFACE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define LIGHTS_HARDWARE_MODULE_ID "lights"
+
+/*
+ * These light IDs correspond to logical lights, not physical.
+ * So for example, if your INDICATOR light is in line with your
+ * BUTTONS, it might make sense to also light the INDICATOR
+ * light to a reasonable color when the BUTTONS are lit.
+ */
+#define LIGHT_ID_BACKLIGHT "backlight"
+#define LIGHT_ID_KEYBOARD "keyboard"
+#define LIGHT_ID_BUTTONS "buttons"
+#define LIGHT_ID_BATTERY "battery"
+#define LIGHT_ID_NOTIFICATIONS "notifications"
+#define LIGHT_ID_ATTENTION "attention"
+
+/*
+ * These lights aren't currently supported by the higher
+ * layers, but could be someday, so we have the constants
+ * here now.
+ */
+#define LIGHT_ID_BLUETOOTH "bluetooth"
+#define LIGHT_ID_WIFI "wifi"
+
+/* ************************************************************************
+ * Flash modes for the flashMode field of light_state_t.
+ */
+
+#define LIGHT_FLASH_NONE 0
+
+/**
+ * To flash the light at a given rate, set flashMode to LIGHT_FLASH_TIMED,
+ * and then flashOnMS should be set to the number of milliseconds to turn
+ * the light on, followed by the number of milliseconds to turn the light
+ * off.
+ */
+#define LIGHT_FLASH_TIMED 1
+
+/**
+ * To flash the light using hardware assist, set flashMode to
+ * the hardware mode.
+ */
+#define LIGHT_FLASH_HARDWARE 2
+
+/**
+ * Light brightness is managed by a user setting.
+ */
+#define BRIGHTNESS_MODE_USER 0
+
+/**
+ * Light brightness is managed by a light sensor.
+ */
+#define BRIGHTNESS_MODE_SENSOR 1
+
+/**
+ * The parameters that can be set for a given light.
+ *
+ * Not all lights must support all parameters. If you
+ * can do something backward-compatible, you should.
+ */
+struct light_state_t {
+ /**
+ * The color of the LED in ARGB.
+ *
+ * Do your best here.
+ * - If your light can only do red or green, if they ask for blue,
+ * you should do green.
+ * - If you can only do a brightness ramp, then use this formula:
+ * unsigned char brightness = ((77*((color>>16)&0x00ff))
+ * + (150*((color>>8)&0x00ff)) + (29*(color&0x00ff))) >> 8;
+ * - If you can only do on or off, 0 is off, anything else is on.
+ *
+ * The high byte should be ignored. Callers will set it to 0xff (which
+ * would correspond to 255 alpha).
+ */
+ unsigned int color;
+
+ /**
+ * See the LIGHT_FLASH_* constants
+ */
+ int flashMode;
+ int flashOnMS;
+ int flashOffMS;
+
+ /**
+ * Policy used by the framework to manage the light's brightness.
+ * Currently the values are BRIGHTNESS_MODE_USER and BRIGHTNESS_MODE_SENSOR.
+ */
+ int brightnessMode;
+};
+
+struct light_device_t {
+ struct hw_device_t common;
+
+ /**
+ * Set the provided lights to the provided values.
+ *
+ * Returns: 0 on succes, error code on failure.
+ */
+ int (*set_light)(struct light_device_t* dev,
+ struct light_state_t const* state);
+};
+
+
+__END_DECLS
+
+#endif // ANDROID_LIGHTS_INTERFACE_H
+
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/overlay.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/overlay.h
new file mode 100644
index 0000000..c56a974
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/overlay.h
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_OVERLAY_INTERFACE_H
+#define ANDROID_OVERLAY_INTERFACE_H
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define OVERLAY_HARDWARE_MODULE_ID "overlay"
+
+/**
+ * Name of the overlay device to open
+ */
+#define OVERLAY_HARDWARE_CONTROL "control"
+#define OVERLAY_HARDWARE_DATA "data"
+
+/*****************************************************************************/
+
+/* possible overlay formats */
+enum {
+ OVERLAY_FORMAT_RGBA_8888 = HAL_PIXEL_FORMAT_RGBA_8888,
+ OVERLAY_FORMAT_RGB_565 = HAL_PIXEL_FORMAT_RGB_565,
+ OVERLAY_FORMAT_BGRA_8888 = HAL_PIXEL_FORMAT_BGRA_8888,
+ OVERLAY_FORMAT_YCbYCr_422_I = 0x14,
+ OVERLAY_FORMAT_CbYCrY_422_I = 0x16,
+ OVERLAY_FORMAT_DEFAULT = 99 // The actual color format is determined
+ // by the overlay
+};
+
+/* values for copybit_set_parameter(OVERLAY_TRANSFORM) */
+enum {
+ /* flip source image horizontally */
+ OVERLAY_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H,
+ /* flip source image vertically */
+ OVERLAY_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
+ /* rotate source image 90 degrees */
+ OVERLAY_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
+ /* rotate source image 180 degrees */
+ OVERLAY_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
+ /* rotate source image 270 degrees */
+ OVERLAY_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270
+};
+
+/* names for setParameter() */
+enum {
+ /* rotation of the source image in degrees (0 to 359) */
+ OVERLAY_ROTATION_DEG = 1,
+ /* enable or disable dithering */
+ OVERLAY_DITHER = 3,
+ /* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
+ OVERLAY_TRANSFORM = 4,
+};
+
+/* enable/disable value setParameter() */
+enum {
+ OVERLAY_DISABLE = 0,
+ OVERLAY_ENABLE = 1
+};
+
+/* names for get() */
+enum {
+ /* Maximum amount of minification supported by the hardware*/
+ OVERLAY_MINIFICATION_LIMIT = 1,
+ /* Maximum amount of magnification supported by the hardware */
+ OVERLAY_MAGNIFICATION_LIMIT = 2,
+ /* Number of fractional bits support by the overlay scaling engine */
+ OVERLAY_SCALING_FRAC_BITS = 3,
+ /* Supported rotation step in degrees. */
+ OVERLAY_ROTATION_STEP_DEG = 4,
+ /* horizontal alignment in pixels */
+ OVERLAY_HORIZONTAL_ALIGNMENT = 5,
+ /* vertical alignment in pixels */
+ OVERLAY_VERTICAL_ALIGNMENT = 6,
+ /* width alignment restrictions. negative number for max. power-of-two */
+ OVERLAY_WIDTH_ALIGNMENT = 7,
+ /* height alignment restrictions. negative number for max. power-of-two */
+ OVERLAY_HEIGHT_ALIGNMENT = 8,
+};
+
+/*****************************************************************************/
+
+/* opaque reference to an Overlay kernel object */
+typedef const native_handle* overlay_handle_t;
+
+typedef struct overlay_t {
+ uint32_t w;
+ uint32_t h;
+ int32_t format;
+ uint32_t w_stride;
+ uint32_t h_stride;
+ uint32_t reserved[3];
+ /* returns a reference to this overlay's handle (the caller doesn't
+ * take ownership) */
+ overlay_handle_t (*getHandleRef)(struct overlay_t* overlay);
+ uint32_t reserved_procs[7];
+} overlay_t;
+
+typedef void* overlay_buffer_t;
+
+/*****************************************************************************/
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+struct overlay_module_t {
+ struct hw_module_t common;
+};
+
+/*****************************************************************************/
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+
+struct overlay_control_device_t {
+ struct hw_device_t common;
+
+ /* get static informations about the capabilities of the overlay engine */
+ int (*get)(struct overlay_control_device_t *dev, int name);
+
+ /* creates an overlay matching the given parameters as closely as possible.
+ * returns an error if no more overlays are available. The actual
+ * size and format is returned in overlay_t. */
+ overlay_t* (*createOverlay)(struct overlay_control_device_t *dev,
+ uint32_t w, uint32_t h, int32_t format);
+
+ /* destroys an overlay. This call releases all
+ * resources associated with overlay_t and make it invalid */
+ void (*destroyOverlay)(struct overlay_control_device_t *dev,
+ overlay_t* overlay);
+
+ /* set position and scaling of the given overlay as closely as possible.
+ * if scaling cannot be performed, overlay must be centered. */
+ int (*setPosition)(struct overlay_control_device_t *dev,
+ overlay_t* overlay,
+ int x, int y, uint32_t w, uint32_t h);
+
+ /* returns the actual position and size of the overlay */
+ int (*getPosition)(struct overlay_control_device_t *dev,
+ overlay_t* overlay,
+ int* x, int* y, uint32_t* w, uint32_t* h);
+
+ /* sets configurable parameters for this overlay. returns an error if not
+ * supported. */
+ int (*setParameter)(struct overlay_control_device_t *dev,
+ overlay_t* overlay, int param, int value);
+
+ int (*stage)(struct overlay_control_device_t *dev, overlay_t* overlay);
+ int (*commit)(struct overlay_control_device_t *dev, overlay_t* overlay);
+};
+
+
+struct overlay_data_device_t {
+ struct hw_device_t common;
+
+ /* initialize the overlay from the given handle. this associates this
+ * overlay data module to its control module */
+ int (*initialize)(struct overlay_data_device_t *dev,
+ overlay_handle_t handle);
+
+ /* can be called to change the width and height of the overlay. */
+ int (*resizeInput)(struct overlay_data_device_t *dev,
+ uint32_t w, uint32_t h);
+
+ int (*setCrop)(struct overlay_data_device_t *dev,
+ uint32_t x, uint32_t y, uint32_t w, uint32_t h) ;
+
+ int (*getCrop)(struct overlay_data_device_t *dev,
+ uint32_t* x, uint32_t* y, uint32_t* w, uint32_t* h) ;
+
+ int (*setParameter)(struct overlay_data_device_t *dev,
+ int param, int value);
+
+ /* blocks until an overlay buffer is available and return that buffer. */
+ int (*dequeueBuffer)(struct overlay_data_device_t *dev,
+ overlay_buffer_t *buf);
+
+ /* release the overlay buffer and post it */
+ int (*queueBuffer)(struct overlay_data_device_t *dev,
+ overlay_buffer_t buffer);
+
+ /* returns the address of a given buffer if supported, NULL otherwise. */
+ void* (*getBufferAddress)(struct overlay_data_device_t *dev,
+ overlay_buffer_t buffer);
+
+ int (*getBufferCount)(struct overlay_data_device_t *dev);
+};
+
+
+/*****************************************************************************/
+
+/** convenience API for opening and closing a device */
+
+static inline int overlay_control_open(const struct hw_module_t* module,
+ struct overlay_control_device_t** device) {
+ return module->methods->open(module,
+ OVERLAY_HARDWARE_CONTROL, (struct hw_device_t**)device);
+}
+
+static inline int overlay_control_close(struct overlay_control_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+static inline int overlay_data_open(const struct hw_module_t* module,
+ struct overlay_data_device_t** device) {
+ return module->methods->open(module,
+ OVERLAY_HARDWARE_DATA, (struct hw_device_t**)device);
+}
+
+static inline int overlay_data_close(struct overlay_data_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#endif // ANDROID_OVERLAY_INTERFACE_H
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/qemud.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/qemud.h
new file mode 100644
index 0000000..874a32f
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/qemud.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_QEMUD_H
+#define ANDROID_INCLUDE_HARDWARE_QEMUD_H
+
+#include <cutils/sockets.h>
+
+/* the following is helper code that is used by the QEMU-specific
+ * hardware HAL modules to communicate with the emulator program
+ * through the 'qemud' multiplexing daemon.
+ *
+ * see the documentation comments for details in
+ * development/emulator/qemud/qemud.c
+ *
+ * all definitions here are built into the HAL module to avoid
+ * having to write a tiny shared library for this.
+ */
+
+/* we expect the D macro to be defined to a function macro
+ * that sends its formatted string argument(s) to the log.
+ * If not, ignore the traces.
+ */
+#ifndef D
+# define D(...) ((void)0)
+#endif
+
+static __inline__ int
+qemud_fd_write(int fd, const void* buff, int len)
+{
+ int len2;
+ do {
+ len2 = write(fd, buff, len);
+ } while (len2 < 0 && errno == EINTR);
+ return len2;
+}
+
+static __inline__ int
+qemud_fd_read(int fd, void* buff, int len)
+{
+ int len2;
+ do {
+ len2 = read(fd, buff, len);
+ } while (len2 < 0 && errno == EINTR);
+ return len2;
+}
+
+static __inline__ int
+qemud_channel_open(const char* name)
+{
+ int fd;
+ int namelen = strlen(name);
+ char answer[2];
+
+ /* connect to qemud control socket */
+ fd = socket_local_client( "qemud",
+ ANDROID_SOCKET_NAMESPACE_RESERVED,
+ SOCK_STREAM );
+ if (fd < 0) {
+ D("no qemud control socket: %s", strerror(errno));
+ return -1;
+ }
+
+ /* send service name to connect */
+ if (qemud_fd_write(fd, name, namelen) != namelen) {
+ D("can't send service name to qemud: %s",
+ strerror(errno));
+ close(fd);
+ return -1;
+ }
+
+ /* read answer from daemon */
+ if (qemud_fd_read(fd, answer, 2) != 2 ||
+ answer[0] != 'O' || answer[1] != 'K') {
+ D("cant' connect to %s service through qemud", name);
+ close(fd);
+ return -1;
+ }
+ return fd;
+}
+
+static __inline__ int
+qemud_channel_send(int fd, const void* msg, int msglen)
+{
+ char header[5];
+
+ if (msglen < 0)
+ msglen = strlen((const char*)msg);
+
+ if (msglen == 0)
+ return 0;
+
+ snprintf(header, sizeof header, "%04x", msglen);
+ if (qemud_fd_write(fd, header, 4) != 4) {
+ D("can't write qemud frame header: %s", strerror(errno));
+ return -1;
+ }
+
+ if (qemud_fd_write(fd, msg, msglen) != msglen) {
+ D("can4t write qemud frame payload: %s", strerror(errno));
+ return -1;
+ }
+ return 0;
+}
+
+static __inline__ int
+qemud_channel_recv(int fd, void* msg, int msgsize)
+{
+ char header[5];
+ int size, avail;
+
+ if (qemud_fd_read(fd, header, 4) != 4) {
+ D("can't read qemud frame header: %s", strerror(errno));
+ return -1;
+ }
+ header[4] = 0;
+ if (sscanf(header, "%04x", &size) != 1) {
+ D("malformed qemud frame header: '%.*s'", 4, header);
+ return -1;
+ }
+ if (size > msgsize)
+ return -1;
+
+ if (qemud_fd_read(fd, msg, size) != size) {
+ D("can't read qemud frame payload: %s", strerror(errno));
+ return -1;
+ }
+ return size;
+}
+
+#endif /* ANDROID_INCLUDE_HARDWARE_QEMUD_H */
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/sensors.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/sensors.h
new file mode 100644
index 0000000..7f9706b
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/sensors.h
@@ -0,0 +1,448 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_SENSORS_INTERFACE_H
+#define ANDROID_SENSORS_INTERFACE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <hardware/hardware.h>
+#include <cutils/native_handle.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define SENSORS_HARDWARE_MODULE_ID "sensors"
+
+/**
+ * Name of the sensors device to open
+ */
+#define SENSORS_HARDWARE_POLL "poll"
+
+/**
+ * Handles must be higher than SENSORS_HANDLE_BASE and must be unique.
+ * A Handle identifies a given sensors. The handle is used to activate
+ * and/or deactivate sensors.
+ * In this version of the API there can only be 256 handles.
+ */
+#define SENSORS_HANDLE_BASE 0
+#define SENSORS_HANDLE_BITS 8
+#define SENSORS_HANDLE_COUNT (1<<SENSORS_HANDLE_BITS)
+
+
+/**
+ * Sensor types
+ */
+#define SENSOR_TYPE_ACCELEROMETER 1
+#define SENSOR_TYPE_MAGNETIC_FIELD 2
+#define SENSOR_TYPE_ORIENTATION 3
+#define SENSOR_TYPE_GYROSCOPE 4
+#define SENSOR_TYPE_LIGHT 5
+#define SENSOR_TYPE_PRESSURE 6
+#define SENSOR_TYPE_TEMPERATURE 7
+#define SENSOR_TYPE_PROXIMITY 8
+#define SENSOR_TYPE_GRAVITY 9
+#define SENSOR_TYPE_LINEAR_ACCELERATION 10
+#define SENSOR_TYPE_ROTATION_VECTOR 11
+
+/**
+ * Values returned by the accelerometer in various locations in the universe.
+ * all values are in SI units (m/s^2)
+ */
+
+#define GRAVITY_SUN (275.0f)
+#define GRAVITY_EARTH (9.80665f)
+
+/** Maximum magnetic field on Earth's surface */
+#define MAGNETIC_FIELD_EARTH_MAX (60.0f)
+
+/** Minimum magnetic field on Earth's surface */
+#define MAGNETIC_FIELD_EARTH_MIN (30.0f)
+
+
+/**
+ * status of each sensor
+ */
+
+#define SENSOR_STATUS_UNRELIABLE 0
+#define SENSOR_STATUS_ACCURACY_LOW 1
+#define SENSOR_STATUS_ACCURACY_MEDIUM 2
+#define SENSOR_STATUS_ACCURACY_HIGH 3
+
+/**
+ * Definition of the axis
+ * ----------------------
+ *
+ * This API is relative to the screen of the device in its default orientation,
+ * that is, if the device can be used in portrait or landscape, this API
+ * is only relative to the NATURAL orientation of the screen. In other words,
+ * the axis are not swapped when the device's screen orientation changes.
+ * Higher level services /may/ perform this transformation.
+ *
+ * x<0 x>0
+ * ^
+ * |
+ * +-----------+--> y>0
+ * | |
+ * | |
+ * | |
+ * | | / z<0
+ * | | /
+ * | | /
+ * O-----------+/
+ * |[] [ ] []/
+ * +----------/+ y<0
+ * /
+ * /
+ * |/ z>0 (toward the sky)
+ *
+ * O: Origin (x=0,y=0,z=0)
+ *
+ *
+ * Orientation
+ * -----------
+ *
+ * All values are angles in degrees.
+ *
+ * Orientation sensors return sensor events for all 3 axes at a constant
+ * rate defined by setDelay().
+ *
+ * azimuth: angle between the magnetic north direction and the Y axis, around
+ * the Z axis (0<=azimuth<360).
+ * 0=North, 90=East, 180=South, 270=West
+ *
+ * pitch: Rotation around X axis (-180<=pitch<=180), with positive values when
+ * the z-axis moves toward the y-axis.
+ *
+ * roll: Rotation around Y axis (-90<=roll<=90), with positive values when
+ * the x-axis moves towards the z-axis.
+ *
+ * Note: For historical reasons the roll angle is positive in the clockwise
+ * direction (mathematically speaking, it should be positive in the
+ * counter-clockwise direction):
+ *
+ * Z
+ * ^
+ * (+roll) .--> |
+ * / |
+ * | | roll: rotation around Y axis
+ * X <-------(.)
+ * Y
+ * note that +Y == -roll
+ *
+ *
+ *
+ * Note: This definition is different from yaw, pitch and roll used in aviation
+ * where the X axis is along the long side of the plane (tail to nose).
+ *
+ *
+ * Acceleration
+ * ------------
+ *
+ * All values are in SI units (m/s^2) and measure the acceleration of the
+ * device minus the force of gravity.
+ *
+ * Acceleration sensors return sensor events for all 3 axes at a constant
+ * rate defined by setDelay().
+ *
+ * x: Acceleration minus Gx on the x-axis
+ * y: Acceleration minus Gy on the y-axis
+ * z: Acceleration minus Gz on the z-axis
+ *
+ * Examples:
+ * When the device lies flat on a table and is pushed on its left side
+ * toward the right, the x acceleration value is positive.
+ *
+ * When the device lies flat on a table, the acceleration value is +9.81,
+ * which correspond to the acceleration of the device (0 m/s^2) minus the
+ * force of gravity (-9.81 m/s^2).
+ *
+ * When the device lies flat on a table and is pushed toward the sky, the
+ * acceleration value is greater than +9.81, which correspond to the
+ * acceleration of the device (+A m/s^2) minus the force of
+ * gravity (-9.81 m/s^2).
+ *
+ *
+ * Magnetic Field
+ * --------------
+ *
+ * All values are in micro-Tesla (uT) and measure the ambient magnetic
+ * field in the X, Y and Z axis.
+ *
+ * Magnetic Field sensors return sensor events for all 3 axes at a constant
+ * rate defined by setDelay().
+ *
+ * Gyroscope
+ * ---------
+ * All values are in radians/second and measure the rate of rotation
+ * around the X, Y and Z axis. The coordinate system is the same as is
+ * used for the acceleration sensor. Rotation is positive in the
+ * counter-clockwise direction (right-hand rule). That is, an observer
+ * looking from some positive location on the x, y or z axis at a device
+ * positioned on the origin would report positive rotation if the device
+ * appeared to be rotating counter clockwise. Note that this is the
+ * standard mathematical definition of positive rotation and does not agree
+ * with the definition of roll given earlier.
+ * The range should at least be 17.45 rad/s (ie: ~1000 deg/s).
+ *
+ * Proximity
+ * ---------
+ *
+ * The distance value is measured in centimeters. Note that some proximity
+ * sensors only support a binary "close" or "far" measurement. In this case,
+ * the sensor should report its maxRange value in the "far" state and a value
+ * less than maxRange in the "near" state.
+ *
+ * Proximity sensors report a value only when it changes and each time the
+ * sensor is enabled. setDelay() is ignored.
+ *
+ * Light
+ * -----
+ *
+ * The light sensor value is returned in SI lux units.
+ *
+ * Light sensors report a value only when it changes and each time the
+ * sensor is enabled. setDelay() is ignored.
+ *
+ * Pressure
+ * --------
+ *
+ * The pressure sensor value is returned in hectopascal (hPa)
+ *
+ * Pressure sensors report events at a constant rate defined by setDelay().
+ *
+ * Gravity
+ * -------
+ * A gravity output indicates the direction of and magnitude of gravity in the devices's
+ * coordinates. On Earth, the magnitude is 9.8. Units are m/s^2. The coordinate system
+ * is the same as is used for the acceleration sensor.
+ * When the device is at rest, the output of the gravity sensor should be identical
+ * to that of the accelerometer.
+ *
+ * Linear Acceleration
+ * -------------------
+ * Indicates the linear acceleration of the device in device coordinates, not including gravity.
+ * This output is essentially Acceleration - Gravity. Units are m/s^2. The coordinate system is
+ * the same as is used for the acceleration sensor.
+ * The output of the accelerometer, gravity and linear-acceleration sensors must obey the
+ * following relation:
+ *
+ * acceleration = gravity + linear-acceleration
+ *
+ *
+ * Rotation Vector
+ * ---------------
+ * A rotation vector represents the orientation of the device as a combination
+ * of an angle and an axis, in which the device has rotated through an angle
+ * theta around an axis <x, y, z>. The three elements of the rotation vector
+ * are <x*sin(theta/2), y*sin(theta/2), z*sin(theta/2)>, such that the magnitude
+ * of the rotation vector is equal to sin(theta/2), and the direction of the
+ * rotation vector is equal to the direction of the axis of rotation. The three
+ * elements of the rotation vector are equal to the last three components of a
+ * unit quaternion <cos(theta/2), x*sin(theta/2), y*sin(theta/2), z*sin(theta/2)>.
+ * Elements of the rotation vector are unitless. The x, y, and z axis are defined
+ * in the same was as for the acceleration sensor.
+ *
+ * The rotation-vector is stored as:
+ *
+ * sensors_event_t.data[0] = x*sin(theta/2)
+ * sensors_event_t.data[1] = y*sin(theta/2)
+ * sensors_event_t.data[2] = z*sin(theta/2)
+ * sensors_event_t.data[3] = cos(theta/2)
+ *
+ */
+
+typedef struct {
+ union {
+ float v[3];
+ struct {
+ float x;
+ float y;
+ float z;
+ };
+ struct {
+ float azimuth;
+ float pitch;
+ float roll;
+ };
+ };
+ int8_t status;
+ uint8_t reserved[3];
+} sensors_vec_t;
+
+/**
+ * Union of the various types of sensor data
+ * that can be returned.
+ */
+typedef struct sensors_event_t {
+ /* must be sizeof(struct sensors_event_t) */
+ int32_t version;
+
+ /* sensor identifier */
+ int32_t sensor;
+
+ /* sensor type */
+ int32_t type;
+
+ /* reserved */
+ int32_t reserved0;
+
+ /* time is in nanosecond */
+ int64_t timestamp;
+
+ union {
+ float data[16];
+
+ /* acceleration values are in meter per second per second (m/s^2) */
+ sensors_vec_t acceleration;
+
+ /* magnetic vector values are in micro-Tesla (uT) */
+ sensors_vec_t magnetic;
+
+ /* orientation values are in degrees */
+ sensors_vec_t orientation;
+
+ /* gyroscope values are in rad/s */
+ sensors_vec_t gyro;
+
+ /* temperature is in degrees centigrade (Celsius) */
+ float temperature;
+
+ /* distance in centimeters */
+ float distance;
+
+ /* light in SI lux units */
+ float light;
+
+ /* pressure in hectopascal (hPa) */
+ float pressure;
+ };
+ uint32_t reserved1[4];
+} sensors_event_t;
+
+
+
+struct sensor_t;
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+struct sensors_module_t {
+ struct hw_module_t common;
+
+ /**
+ * Enumerate all available sensors. The list is returned in "list".
+ * @return number of sensors in the list
+ */
+ int (*get_sensors_list)(struct sensors_module_t* module,
+ struct sensor_t const** list);
+};
+
+struct sensor_t {
+ /* name of this sensors */
+ const char* name;
+ /* vendor of the hardware part */
+ const char* vendor;
+ /* version of the hardware part + driver. The value of this field is
+ * left to the implementation and doesn't have to be monotonically
+ * increasing.
+ */
+ int version;
+ /* handle that identifies this sensors. This handle is used to activate
+ * and deactivate this sensor. The value of the handle must be 8 bits
+ * in this version of the API.
+ */
+ int handle;
+ /* this sensor's type. */
+ int type;
+ /* maximaum range of this sensor's value in SI units */
+ float maxRange;
+ /* smallest difference between two values reported by this sensor */
+ float resolution;
+ /* rough estimate of this sensor's power consumption in mA */
+ float power;
+ /* minimum delay allowed between events in microseconds. A value of zero
+ * means that this sensor doesn't report events at a constant rate, but
+ * rather only when a new data is available */
+ int32_t minDelay;
+ /* reserved fields, must be zero */
+ void* reserved[8];
+};
+
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+struct sensors_poll_device_t {
+ struct hw_device_t common;
+
+ /** Activate/deactivate one sensor.
+ *
+ * @param handle is the handle of the sensor to change.
+ * @param enabled set to 1 to enable, or 0 to disable the sensor.
+ *
+ * @return 0 on success, negative errno code otherwise
+ */
+ int (*activate)(struct sensors_poll_device_t *dev,
+ int handle, int enabled);
+
+ /**
+ * Set the delay between sensor events in nanoseconds for a given sensor.
+ * It is an error to set a delay inferior to the value defined by
+ * sensor_t::minDelay. If sensor_t::minDelay is zero, setDelay() is
+ * ignored and returns 0.
+ *
+ * @return 0 if successful, < 0 on error
+ */
+ int (*setDelay)(struct sensors_poll_device_t *dev,
+ int handle, int64_t ns);
+
+ /**
+ * Returns an array of sensor data.
+ * This function must block until events are available.
+ *
+ * @return the number of events read on success, or -errno in case of an error.
+ * This function should never return 0 (no event).
+ *
+ */
+ int (*poll)(struct sensors_poll_device_t *dev,
+ sensors_event_t* data, int count);
+};
+
+/** convenience API for opening and closing a device */
+
+static inline int sensors_open(const struct hw_module_t* module,
+ struct sensors_poll_device_t** device) {
+ return module->methods->open(module,
+ SENSORS_HARDWARE_POLL, (struct hw_device_t**)device);
+}
+
+static inline int sensors_close(struct sensors_poll_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#include <hardware/sensors_deprecated.h>
+
+#endif // ANDROID_SENSORS_INTERFACE_H
diff --git a/android-headers-gingerbread/hardware/libhardware/include/hardware/sensors_deprecated.h b/android-headers-gingerbread/hardware/libhardware/include/hardware/sensors_deprecated.h
new file mode 100644
index 0000000..7974788
--- /dev/null
+++ b/android-headers-gingerbread/hardware/libhardware/include/hardware/sensors_deprecated.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define SENSORS_HARDWARE_CONTROL "control"
+#define SENSORS_HARDWARE_DATA "data"
+
+__BEGIN_DECLS
+
+typedef struct {
+ int sensor;
+ union {
+ sensors_vec_t vector;
+ sensors_vec_t orientation;
+ sensors_vec_t acceleration;
+ sensors_vec_t magnetic;
+ float temperature;
+ float distance;
+ float light;
+ };
+ int64_t time;
+ uint32_t reserved;
+} sensors_data_t;
+
+struct sensors_control_device_t {
+ struct hw_device_t common;
+ native_handle_t* (*open_data_source)(struct sensors_control_device_t *dev);
+ int (*close_data_source)(struct sensors_control_device_t *dev);
+ int (*activate)(struct sensors_control_device_t *dev,
+ int handle, int enabled);
+ int (*set_delay)(struct sensors_control_device_t *dev, int32_t ms);
+ int (*wake)(struct sensors_control_device_t *dev);
+};
+
+struct sensors_data_device_t {
+ struct hw_device_t common;
+ int (*data_open)(struct sensors_data_device_t *dev, native_handle_t* nh);
+ int (*data_close)(struct sensors_data_device_t *dev);
+ int (*poll)(struct sensors_data_device_t *dev,
+ sensors_data_t* data);
+};
+
+static inline int sensors_control_open(const struct hw_module_t* module,
+ struct sensors_control_device_t** device) {
+ return module->methods->open(module,
+ SENSORS_HARDWARE_CONTROL, (struct hw_device_t**)device);
+}
+
+static inline int sensors_control_close(struct sensors_control_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+static inline int sensors_data_open(const struct hw_module_t* module,
+ struct sensors_data_device_t** device) {
+ return module->methods->open(module,
+ SENSORS_HARDWARE_DATA, (struct hw_device_t**)device);
+}
+
+static inline int sensors_data_close(struct sensors_data_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+__END_DECLS
--
1.8.5.2 (Apple Git-48)
More information about the Android
mailing list