[dvblast-devel] List of tested CAMs and daughterboards?

[Andy Gatward]

On 06/10/2009 08:33, "Thomas Kernen" <tkernen at deckpoint.ch> wrote:

> I suspect the short answer is to go and look here:
> http://www.linuxtv.org/wiki/index.php/DVB_Conditional_Access_Modules

Correct - anything that is supported by the LinuxDVB stack should work...

> Thoughts/comments/suggestions/flames?

...although it probably wouldn't hurt to have a list of known working
boards, not just for the CAM side, but even tuner cards that are known to
work correctly.  Some of the LinuxDVB drivers are not very well written, or
have been written without the full data sheet from the chipset
manufacturers, so may not initialise chips properly etc.

However I suspect this would be done better as a Wiki page on the videolan
site, rather than another readme file that we have to keep updating.

Andy

-- 
  Andy Gatward <a.j.gatward at reading.ac.uk>        +44 (0)118 378 7147
  Network Services Specialist, IT Services, University of Reading, UK