[dvblast-devel] Help with a small problem FREESAT EPG

[JULIAN GARDNER]

OK i have my Eit Grabber working fine on pid 18, but now im looking at expanding it to receive EPG from other pids, like Freesat in the uk.

So i have my conf file
# encoder
# Bloomberg
227.10.205.70:1234/udp 1 52550
# EPG
228.10.0.0:1234/udp 1 0 3002

Command line
dvblast -r "/tmp/dvb_0.pipe" -a 0 -c dvb.conf -f 11426000 -s 27500000 -x text -O 10000 -Q 1 -U -W -Y

Now i only added Bloomberg so i could get data, and the EPG data is supposed to be on pid 3002

So i have a grabber that just dumps an IP:PORT to a file, and if i run this on the machine i get not what i expected.

headers for 1st few packets
47 40 c0
47 40 c0
47 40 c0
47 40 00
47 40 c0

Any ideas?

joolz
ps
1st part of dump from dvblast
2012-02-14_21:40:45.79145 DVBlast 2.0.0 (git-2.1-4-g41c8150-dirty)
2012-02-14_21:40:45.79146 warning: restarting
2012-02-14_21:40:45.79147 warning: raw UDP output is deprecated.  Please consider using RTP.
2012-02-14_21:40:45.79147 warning: for DVB-IP compliance you should use RTP.
2012-02-14_21:40:45.79370 debug: using linux-dvb API version 5
2012-02-14_21:40:46.00786 debug: Frontend "TurboSight TBS 6984 DVBS/S2 frontend" type "QPSK (DVB-S/S2)" supports:
2012-02-14_21:40:46.00790 debug:  frequency min: 950000, max: 2150000, stepsize: 1011, tolerance: 5000
2012-02-14_21:40:46.00790 debug:  symbolrate min: 1000000, max: 45000000, tolerance: 0
2012-02-14_21:40:46.00790 debug:  capabilities:
2012-02-14_21:40:46.00791 debug:   INVERSION_AUTO
2012-02-14_21:40:46.00792 debug:   FEC_1_2
2012-02-14_21:40:46.00792 debug:   FEC_2_3
2012-02-14_21:40:46.00792 debug:   FEC_3_4
2012-02-14_21:40:46.00793 debug:   FEC_4_5
2012-02-14_21:40:46.00793 debug:   FEC_5_6
2012-02-14_21:40:46.00793 debug:   FEC_6_7
2012-02-14_21:40:46.00793 debug:   FEC_7_8
2012-02-14_21:40:46.00794 debug:   FEC_AUTO
2012-02-14_21:40:46.00794 debug:   QPSK
2012-02-14_21:40:46.00795 debug:   2G_MODULATION
2012-02-14_21:40:46.00795 debug:   FE_CAN_RECOVER
2012-02-14_21:40:46.00795 debug: frequency 11426000 is in Ku-band (lower)
2012-02-14_21:40:46.35791 debug: configuring LNB to v=13 p=0 satnum=0
2012-02-14_21:40:46.35794 debug: tuning QPSK frontend to f=11426000 srate=27500000 inversion=-1 fec=999 rolloff=35 modulation=legacy pilot$
2012-02-14_21:40:46.35875 warning: failed opening CAM device /dev/dvb/adapter0/ca0 (No such file or directory)
2012-02-14_21:40:46.80774 debug: setting filter on PID 0
2012-02-14_21:40:46.80779 debug: setting filter on PID 1
2012-02-14_21:40:46.80779 debug: setting filter on PID 16
2012-02-14_21:40:46.80780 debug: setting filter on PID 17
2012-02-14_21:40:46.80781 debug: setting filter on PID 18
2012-02-14_21:40:46.80781 debug: setting filter on PID 19
2012-02-14_21:40:46.80782 debug: setting filter on PID 20
2012-02-14_21:40:46.80790 debug: conf: 227.10.205.70:1234/udp config=0x29 sid=52550 pids[0]
2012-02-14_21:40:46.80794 debug: conf: 228.10.0.0:1234/udp config=0x29 sid=0 pids[1]=3002
2012-02-14_21:40:46.80796 debug: setting filter on PID 3002
2012-02-14_21:40:46.80801 debug: frontend has acquired signal
2012-02-14_21:40:46.80801 debug: frontend has acquired carrier
2012-02-14_21:40:46.80801 debug: frontend has acquired stable FEC
2012-02-14_21:40:46.80802 debug: frontend has acquired sync
2012-02-14_21:40:46.80802 info: frontend has acquired lock
2012-02-14_21:40:46.80802 frontend has acquired lock
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20120214/d7088d96/attachment.html>