[dvblast-devel] Dvblast and CAM Dre Crypt PRO

[Richard Hemzal]

OK, I recommend to make try with one and then two channels. Simply leave in config only SID 31010  for try and you will see if thing
is different.

-----Original Message-----
From: dvblast-devel-bounces at videolan.org [mailto:dvblast-devel-bounces at videolan.org] On Behalf Of Kompan Kolia
Sent: Wednesday, March 14, 2012 11:33 AM
To: Mailing list for DVBlast developers
Subject: Re: [dvblast-devel] Dvblast and CAM Dre Crypt PRO

Yes! I am sure!
This is Proffesional CAM modul for descramble up to 10 channels.

Problem then i insert CAM. I am not descramble any channels.
I just insert CAM in CI, and have this trouble without change conf file.

14.03.2012, 14:27, "Richard Hemzal" <hemzal at asm.cz>:
> Hi,
> are you sure that CAM allows simultanous decrypting of multiple channels?
> This symptom I know from new Irdeto (pi-sys). If you will change 
> config files to stream just one channel (only one SID) then issue can dissapear. Try how many channels it can decrypt then will
have idea. Bellow I see it is trying 5 channels to handle?
>
> -----Original Message-----
> From: dvblast-devel-bounces at videolan.org 
> [mailto:dvblast-devel-bounces at videolan.org] On Behalf Of Kompan Kolia
> Sent: Wednesday, March 14, 2012 10:14 AM
> To: dvblast
> Subject: [dvblast-devel] Dvblast and CAM Dre Crypt PRO
>
> I recieve  FTA channels SOUZ and TopShop from transponder 12 303 L, and stream it to my network.
> All is well. The stream is smoth, in tcpdump no delays on packets. My 
> PC receive this stream and play it perfectly. No artefacts, delays etc.
>
> But one has only to insert the CAM DRE-CRYPT, immediately ш have little freezes.
> Once every from 2 to 10 seconds the stream freezes and resumes. I see 
> it in tcpdump output. In this case my PC recieves streams, but picture is poor. Sound is freeze, Picture is broken.
>
> With the CAM modules for other encoding is no problem.
> Also, there are no problems with single-channel unit DRE Crypt.
>
> How can there be a problem?
> What to see that the twist?
>
> Here is some diagnostic information ...
>
> I have:
> Dish 36°
> SkyStar HD2 CI
> Linux 2.6.32-5-686 #1 SMP Mon Jun 13 04:13:06 UTC 2011 i686 GNU/Linux
> Drivers: s2-liplianin ver 15391
>
> CAM module spec:
> Software version V2001
> Bootloader version V8480
> SDK version sdk r6764
>
> DVBlast output in log file:
> info: CAM: DRE multi HD , 01, 4A60, 0001
> debug: opening ConditionalAccess session (3)
> debug: CA system IDs supported by the application :
> debug: - 0x4ae0
> debug: - 0x4ae1
> debug: adding first CAPMT for SID 31010 on session 3
> debug: adding CAPMT for SID 31020 on session 3
> debug: adding CAPMT for SID 31030 on session 3
> debug: adding CAPMT for SID 31060 on session 3
> debug: adding CAPMT for SID 59 on session 3
>
> PC spec:
> # lspci
> 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM 
> Controller (rev 03)
> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express 
> Root Port (rev 03)
> 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #4
> 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #5
> 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #6
> 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 
> EHCI Controller #2
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD 
> Audio Controller
> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI 
> Express Root Port 1
> 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI 
> Express Root Port 5
> 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI 
> Express Root Port 6
> 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #1
> 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #2
> 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #3
> 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 
> EHCI Controller #1
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
> 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface 
> Controller
> 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA 
> AHCI Controller
> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus 
> Controller
> 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 
> 210] (rev a2)
> 01:00.1 Audio device: nVidia Corporation High Definition Audio 
> Controller (rev a1)
> 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
> 05:00.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV 
> PCI Bridge Controller [Ver 1.0] (rev 01)
> 05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV 
> PCI Bridge Controller [Ver 1.0] (rev 01)
> 05:02.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV 
> PCI Bridge Controller [Ver 1.0] (rev 01)
> 05:03.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV 
> PCI Bridge Controller [Ver 1.0] (rev 01)
> 05:04.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV 
> PCI Bridge Controller [Ver 1.0] (rev 01)
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel
_______________________________________________
dvblast-devel mailing list
dvblast-devel at videolan.org
http://mailman.videolan.org/listinfo/dvblast-devel