[dvblast-devel] multicast via 2 interfaces - resend due bad date
Dan Lita
dan.lita at b1tv.ro
Mon Sep 21 10:56:46 CEST 2015
On 9/21/2015 11:35 AM, Christophe Massiot wrote:
> Hello,
>
>> On 20 Aug 2015, at 10:29, Dan Lita <dan.lita at b1tv.ro> wrote:
>>
>> Hi list
>>
>> I have the following problem:
>>
>> I 'm getting a multicast stream via 2 vlans in the same pc.
>> The multicast is 239.10.0.1:1234 originating from 192.168.10.1
>>
>> and the ip of the vlans are:
>> eth0.5 192.168.5.20 multicast enabled
>> and
>> eth0.6 192.168.6.20 multicast enabled
>>
>>
>> The idea is that I can see the stream with trafshow on both eth0.5 and eth0.6
>> but I cannot get those streams with dvblast by using:
>>
>> /usr/local/bin/dvblast -D 239.10.0.1:1234/udp/ifaddr=192.168.5.20 -c /root/scripts/config/p1 -u -U -C
>> or:
>> /usr/local/bin/dvblast -D 239.10.0.1:1234/udp/ifaddr=192.168.6.20 -c /root/scripts/config/p1 -u -U -C
>>
>>
>> The only way I was able to get the streams is if I configure the eth0.5 with ip from the same class as the encoder.
>> (eth0.5 192.168.10.20) and 239.0.0.0 is routed via eth0.5
> Then this means it is probably a Linux problem : disable the rp_filter on both interfaces.
>
The rp filted is disabled :
cat /proc/sys/net/ipv4/conf/eth0.5/rp_filter
0
cat /proc/sys/net/ipv4/conf/eth0.6/rp_filter
0
The system is Centos 6.7 (and all 192.168.x.y are 255.255.255.0 masked.)
Still not working even with rp_filter disabled :-(
What else to check ?
Thank you,
Dan
More information about the dvblast-devel
mailing list