[dvblast-devel] Dvblast & CA Slot

[Ibrahim Tachijian]

dvblast_mmi.sh -r /tmp/0.sock
Defaulting to slot #0
Slot is not ready, retry later

dvblast_mmi.sh -r /tmp/1.sock
Defaulting to slot #0
Slot is not ready, retry later

This is all I am getting currently.

Not inserted properly ?
Because I dont think having the smart-card inserted or not (or upside down)
should matter for dvblast_mmi, right?

On Thu, Jun 14, 2018 at 9:39 PM Doychin Dokov <dokov at silistra.tv> wrote:

> use dvblast_mmi to communicate with the module menu - it usually contains
> all you need.
>
> On Thu, Jun 14, 2018 at 10:02 PM, Ibrahim Tachijian <barhom at netsat.se>
> wrote:
>
>> Hey,
>>
>> I just installed a tuner card with a CA slot, and I have never used the
>> CA functionality before.
>> How do I verify that the CA module and smart-card is being read by the
>> system?
>>
>> I tried the following;
>>
>> *#dvblastctl mmi_status -r /tmp/0.sock*
>> *CA interface with 1 slot, type:*
>> *CI link layer level interface*
>>
>> *0 available descramblers (keys)*
>>
>> Anything else I can run to for example verify if the smart-card is
>> inserted the correct way into the module?
>>
>>
>>
>> _______________________________________________
>> dvblast-devel mailing list
>> dvblast-devel at videolan.org
>> https://mailman.videolan.org/listinfo/dvblast-devel
>>
>>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> https://mailman.videolan.org/listinfo/dvblast-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20180614/140a53e0/attachment.html>