[streaming] Other problem to stream with VLS and Nexus card

[Bessem ELOUAFI]

Hi,
I want to stream an MPEG2 data corresponding to one specific channel received by the Nexus card but I have theses problems:
Executing Command3: 'Start test01 client1 dvb'     ## see the VLS.cfg file
Transponder not found
Time out 
Read error from program 'INput DVB dvb' 

I use the next  VLS.cfg file and the next dvbrc file: 


 #### VLS Config  #####
# Streams sources declaration
BEGIN "Inputs"
local1 = "local" # Local input example
dvb = "dvb" # Video input example (DVB card)
END
# Video input (DVB) configuration
BEGIN "5"
Name = "test01"
DeviceNumber = "0" # /dev/dvb/adapter<i>
Frequency = "10920000"
Polarisation = "0"   #Horizontal
SymbolRate = "22000"
DiSEqC = "0"
LNB_Lof1 = "9750000"
LNB_Lof2 = "10600000"
LNB_Slof = "11700000"
SendMethod = "1" #MPEG2
END
# Channel (outputs) declaration
BEGIN "Channels"
client1 = "network"
END
# Channels configuration
BEGIN "client1" # unicast example
DstHost = "172.24.20.250" # destination host
DstPort = "5001" # destination port
Interface = "eth0" # Interface
END
BEGIN "LaunchOnStartUp"
command3 = "start test01 client1 dvb"
END

###### Dvbrc #########
LNB ID 0 TYPE 1 LOF1 9750000 LOF2 10600000 SLOF 11700000 DISEQCNR 0
SAT ID 192 NAME "Astra" LNBID 0 FMIN 10700000 FMAX 12700000
TRANSPONDER ID 89 SATID 0192 TYPE 0 FREQ 10920000 POL H SRATE 22000000 FEC 3/4
CHANNEL ID 1 NAME "Going Place" SATID 192 TPID 89 SID 11 TYPE 0 VPID 906 APID 907 APID 907 

#########
I don't know where is the problem, is it in the command3 that I lanch in the VLS.cfg file ? 
Thinks fro help.
Best regards. Bessem
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.videolan.org/pipermail/streaming/attachments/20030717/ebab9b15/attachment.htm