[streaming] Re: Skystar2 and a dvb stream over LAN

Tux007 tux007 at ita-hbu.de
Thu Jan 8 22:44:55 CET 2004


Hi!
I'm back!

> BEGIN "kfir"
> # --- Example:
> # Device        = "/dev/video"     # Video4linux device (default is
> /dev/video)
> # Type          = "Mpeg2-PS"       # Stream type (default is "Mpeg2-PS")
> END
>
> you should comment this section, since you didn't declare any such input
>
>    client1       = "192.168.1.1"
> This is an invalid channel declaration. I think you meant "network"
>

Hmm, I don't really know, what is mentiont! I have a DVB Card in my PC an want 
to stream to the lan! If I understand you right, client1 was an input! That 
was wrong!

> command2 = "start 28009 client1 dvb"
>
>   28009 Has to be the name of a TV channel, declared in you dvbrc file.

Where is the dvbrc?? I can't find it!

At the moment, there is this output if I start vls:
VideoLAN Server v 0.5.3 (Dec 29 2003) - (c)1999-2003 VideoLAN
2004-01-08 22:37:07 [ERROR/Vls]  Input type "dvb" invalid

regards
Jan

PS: Here my config file! Are there any more Errors?


# vls configuration file (Example)

# Application wide settings
BEGIN "Vls"
  LogFile       = "vls.log"             # log file
  ScreenLog     = "enable"              # log to the console
  SystemLog     = "disable"             # log to the systemlog
END

# Security informations :
#
# The section "Groups" describes which group is allowed to use which command.
# Each user who belongs to the 'master" group has all the power on the server.
# Each one who belongs to the "monitor" group is a "read-only" user.
BEGIN "Groups"
# --- Format:
# groupname     = "cmd1|cmd2|..."
# --- Example:
  monitor       = "help|browse|logout"
  master        = "help|browse|start|resume|suspend|stop|shutdown|logout|
config|program|input|channel|show"
END

# The section "Users" describes each user
# Use "mkpasswd" to generate the encrypted password.
BEGIN "Users"
# --- Format:
# username      = "encryptedpassword:group"
# --- Example:
  monitor       = "3BcKWoiQn0vi6:monitor"       # password is 'monitor'
  bozo          = "JKg2TpPerilnw:master"        # password is 'bozo'
END

# Telnet Administration
BEGIN "Telnet"
#  Domain        = "Inet6"              # Inet4 or Inet6
  LocalPort     = "9999"                # Port to use for that purpose
  Use = "true"
END

# Streams sources declaration
BEGIN "Inputs"
# --- Format:
# InputName     = "Type"
# --- Example:
  local1       = "local"                # Local input example
# kfir         = "video"               # Video input example (mpeg encoder)
  dvb          = "dvb"                 # Video input example (DVB card)
END

# --- Format:
# BEGIN "program_number"
#   Name     = "program_name"
#   Type     = "type"          # can be Mpeg1-PS, Mpeg2-PS, Mpeg2-TS, or Dvd
#   FileName = "path"          # use this variable if Type is not "Dvd"
#   Device   = "device"        # use this variable with type "Dvd"
# END

# --- Example:
BEGIN "1"     # MPEG2 stream stored in /home/videolan/streams/Dolby.vob
  Name     = "dolby"
  FileName = "/media/films/Dolby_Canyon.vob"
  Type     = "Mpeg2-PS"
END

BEGIN "2"     # another file
  Name     = "canyon"
  FileName = "Dolby_Canyon.vob"
  Type     = "Mpeg2-PS"
END

BEGIN "3"     # DVD
  Name       = "film"
  Device     = "/dev/cdrom"
  Type       = "dvd"
  DvdTitle   = "1"    # Start title
  DvdChapter = "1"    # Start chapter
END

BEGIN "4"     # DVD stored on a hard disk
  Name       = "matrix"
  Device     = "/media/matrix/VIDEO_TS"
  Type       = "dvd"
  DvdTitle   = "1"   # Start title
  DvdChapter = "1"   # Start chapter
END

# Video input configuration
BEGIN "kfir"
# --- Example:
# Device        = "/dev/video"     # Video4linux device (default is /dev/
video)
# Type          = "Mpeg2-PS"       # Stream type (default is "Mpeg2-PS")
END

# Video input (DVB) configuration
BEGIN "dvb"
# --- Example:
  DeviceNumber = "0"                   # /dev/dvb/adapter<i>
  SendMethod   = "0"                   # 0 - Send All Pids
                                	# 1 - Send only MPEG2 datas 
END

# Channel (outputs) declaration
BEGIN "Channels"
# --- Format:
# ChannelName   = "Type"
# --- Example:
  localhost     = "network"
#  client1       = "192.168.1.1"
#  client2       = "network"
   multicast     = "network"
#  localfile     = "file"
END

# Channels configuration
BEGIN "localhost"         # The client is on the same host as the server
  DstHost = "127.0.0.1"
  DstPort = "1234"
END

#BEGIN "client1"                          # unicast example
#  DstHost = "192.168.1.1"                # destination host
#  DstPort = "1234"                       # destination port
#END

#BEGIN "client2"                          # unicast with IPv6 example
#  Domain  = "inet6"
#  DstHost = "3ffe:ffff::2:12:42"         # destination host
#  DstPort = "1234"                       # destination port
#END

BEGIN "multicast"                        # multicast example
  Type    = "multicast"
  TTL     = "1"                          # Time To Live
  DstHost = "192.168.1.0"                # multicast address
  DstPort = "1234"                       # destination port
END

#BEGIN "localfile"                        # file output example
#  FileName = "stream.ts"
#  Append   = "no"                        # rewrite the file if it exists
#END

# Commands automatically lanched on Startup
# Commands shall be like they would be typed in a telnet console.
BEGIN "LaunchOnStartUp"
#  command1 = "start dolby localhost local1 --loop"
   command2 = "start ZDF client1 dvb"
END

-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>



More information about the streaming mailing list