[streaming] Problems with sky2pc
daniela at easyband.com.br
daniela at easyband.com.br
Wed Jul 7 14:42:01 CEST 2004
Hello all,
I have some problems installing vls to unicast under linux. I have a
sky2pc board and its installed correctly. I downloaded and installed the
libraries, the dvb drivers and also vls.When i type lsmod i get:
Module Size Used by Not tainted
skystar2 22376 0 (unused)
mt312 7336 1
dvb-core 54092 5 [skystar2 mt312]
video-buf 15592 0 (unused)
v4l2-common 4896 0 (unused)
v4l1-compat 14628 0 (unused)
videodev 8288 0 (unused)
evdev 5824 0 (unused)
ide-cd 35708 0 (autoclean)
cdrom 33728 0 (autoclean) [ide-cd]
sis 52992 1
sisfb 203148 0 [sis]
agpgart 47776 3
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
8139too 18088 1
mii 3976 0 [8139too]
acm 7840 0 (unused)
keybdev 2944 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5856 0 [evdev keybdev mousedev hid]
usb-ohci 21480 0 (unused)
usbcore 78784 1 [acm hid usb-ohci]
What i think is ok. Then when i type: vls -vv -d udp:192.168.0.10
dvb:"CH1" --ttl 12 i got nothing!
VideoLAN Server v 0.5.6 (Jun 15 2004) - (c)1999-2003 VideoLAN
2004-07-07 09:10:21 [INFO/Vls] Module "channel:file" registered
2004-07-07 09:10:21 [INFO/Vls] Module "channel:network" registered
2004-07-07 09:10:21 [INFO/Vls] Module "mpegreader:file" registered
2004-07-07 09:10:21 [INFO/Vls] Module "mpegconverter:ts2ts" registered
2004-07-07 09:10:21 [INFO/Vls] Module "mpegconverter:ps2ts" registered
2004-07-07 09:10:21 [INFO/Vls] Module "input:local" registered
2004-07-07 09:10:21 [INFO/Vls] Module "input:video" registered
2004-07-07 09:10:21 [INFO/Vls] Browsing modules in directory "."
2004-07-07 09:10:22 [INFO/Vls] Browsing modules in directory
"/usr/local/lib/videolan/vls"
2004-07-07 09:10:22 [INFO/Vls] Module "mpegreader:dvd" registered
2004-07-07 09:10:22 [INFO/Vls] Module "input:dvb" registered
2004-07-07 09:10:22 [INFO/Vls] Module "mpegreader:dvb" registered
2004-07-07 09:10:22 [INFO/Vls] Channel 'output1' created
2004-07-07 09:10:22 [INFO/Vls] Starting input 'input1'
2004-07-07 09:10:24 [INFO/input1] DVB-S Card registered without decoder
Using default /root/.dvbrc
Reading original format . done
2004-07-07 09:10:24 [INFO/input1] Added program 'CH1'
2004-07-07 09:10:24 [INFO/Vls] Input 'input1' sucessfully initialised
2004-07-07 09:10:24 [INFO/Vls] Executing command1 : 'start CH1 output1
input1 '
The dmesg says:
...
Linux video capture interface: v1.00
PCI: Enabling device 00:0d.0 (0004 -> 0007)
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 01:00.0
skystar2.c: FlexCopIIB(rev.195) chip found
skystar2.c: the chip has 38 hardware filters
DVB: registering new adapter (Technisat SkyStar2 driver).
DVB: registering frontend 0:0 (Zarlink MT312)...
I think everything is ok, but...
Does anyone have a clue? Thanks in advance,
Daniela
--
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>
More information about the streaming
mailing list