[streaming] Re: Starting server: no messages :-(
Benjamin PRACHT
bigben+spam at videolan.org
Sun Nov 28 13:57:01 CET 2004
On Sun, Nov 28, 2004, ron wrote :
> Benjamin PRACHT wrote:
>
> >On Sun, Nov 28, 2004, ron wrote :
> >
> >
> >>It does not mutter to me which format the file should have.
> >>At the moment I can not use vlc - since I use Suse 9.1 (rpm based) -
> >>I did try to compile the dependencies of vlc - but the list of
> >>dependencies grows bigger as I do so - and I would like to test it
> >>before spending one day with installing vlc...
> >>I tried it also with an .mpg file, but it is the same: the server
> >>responses "ok", no log on the screen (-vv option is on) and the client
> >>does not show anything...
> >>Cheers,
> >>Ron
> >>
> >>
> >>
> >
> >Some unofficial RPM of VLC for SUSE are available. Moreover, building a
> >very simple version of VLC to stream a file almost doesn't require any
> >dependency (libdvbpsi should be enough).
> >
> >
> Will try it...
>
> >BTW, you should try setting VLS' parametters from command line (vls -d
> >udp:... -f ... -vv), or give us your *complete* vls.cfg
> >
> >
> Here it is (I removed for this mail all commented sections, so it is
> more readable...):
>
> BEGIN "Vls"
> LogFile = "/home/ron1/vls.log" # log file
> ScreenLog = "enable" # log to the console
> SystemLog = "disable" # log to the systemlog
> END
>
> # Security informations :
> #
> # The section "Groups" describes which group is allowed to use which
> command.
> # Each user who belongs to the 'master" group has all the power on the
> server.
> # Each one who belongs to the "monitor" group is a "read-only" user.
> BEGIN "Groups"
> monitor = "help|browse|logout"
> master =
> "help|browse|start|resume|suspend|stop|shutdown|logout|config|program|input|channel|show"
> END
>
> BEGIN "Users"
> monitor = "3BcKWoiQn0vi6:monitor" # password is 'monitor'
> ron = "5LVvcs/a4DnsaJU:master" #
> "JKg2TpPerilnw:master" # password is 'bozo'
> END
>
> # Telnet Administration
> BEGIN "Telnet"
> LocalPort = "9999" # Port to use for that purpose
> Use = "true"
> END
>
> # Streams sources declaration
> BEGIN "Inputs"
> local1 = "local" # Local input example
> END
>
> BEGIN "1"
> Name = "mpg"
> FileName = "/home/ron1/1.mpg"
> Type = "Mpeg2-TS"
> END
>
Well, I doubt you file is MPEG2-TS with such an extension. You should
try Mpeg2-PS or Mpeg1-PS (as stated in the comments of the exemple file)
> BEGIN "2"
> Name = "mov"
> FileName = "/home/ron1/1.mov"
> Type = "Mpeg2-TS"
> END
>
> BEGIN "3"
> Name = "avi"
> Filename = "/home/ron1/1.avi"
> Type = "Mpeg2-TS"
> END
>
As stated before, VLS won't be able to read those
> # Channel (outputs) declaration
> BEGIN "Channels"
> mc = "network"
> END
>
> BEGIN "mc" # multicast example
> Type = "multicast"
> TTL = "0" # Time To Live
> DstHost = "239.20.30.40" # multicast address
> DstPort = "1234" # destination port
> END
>
>
You didn't specify any "LaunchOnStartUp" section, that means that VLS
won't start ant stream automatically on startup. You should log in on
the telnet interface and start it by hand.
--
BigBen
--
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html
More information about the streaming
mailing list