[streaming] Re: Hauppage WINTV NEXUS-s
prasad
prasadbgr at multitech.co.in
Wed Jun 1 14:50:29 CEST 2005
Hi All,
Thanks Philipe , the command you send is working.
Now the problem is VLC is jsut catching the signal and locking it. But
he is not playing locally and he is
not streaming also.
I am using the following commands and getting some errors
> vlc -vvv --color --ttl 12 --ts-es-id-pid --program 1310 dvb:
> --dvb-adapter=0 --dvb-frequency=12539000 --dvb-srate=27500000
> --dvb-voltage=18 --dvb-fec=3 --dvb-budget-mode
> vlc -vvv --color --ttl 12 --ts-es-id-pid dvb: --dvb-adapter=0
> --dvb-frequency=12539000 --dvb-srate=27500000 --dvb-voltage=18
> --dvb-fec=3 --dvb-budget-mode --sout
> '#duplicate{dst=std{access=udp,mux=ts,url=192.168.4.126:3001}}'
> [00000221] dvb access debug: using voltage=18
> [00000221] dvb access debug: using tone=1
> [00000221] dvb access debug: check frontend ... has signal
> [00000221] dvb access debug: check frontend ... has signal
> [00000221] dvb access debug: check frontend ... has carrier
> [00000221] dvb access debug: check frontend ... has stable forward
> error correction
> [00000221] dvb access debug: check frontend ... has sync
> [00000221] dvb access debug: check frontend ... has lock
> [00000221] dvb access debug: tuning succeeded
> [00000221] dvb access debug: Bit error rate: 65280
> [00000221] dvb access debug: Signal strength: 47043
> [00000221] dvb access debug: SNR: 54402
> [00000221] dvb access debug: Opening device /dev/dvb/adapter0/dvr0
> [00000221] dvb access debug: setting filter on all PIDs
> [00000221] dvb access debug: Opening device /dev/dvb/adapter0/demux0
> [00000221] dvb access debug: DMXSetFilter: DMX_PES_OTHER for PID 8192
error:
> [00000221] dvb access error: DMXSetFilter: failed with -1 (Invalid
> argument)
> [00000221] dvb access error: DMXSetFilter failed
> [00000221] dvb access debug: Opening device /dev/dvb/adapter0/ca0
> [00000221] dvb access error: CAMInit: no compatible CAM module
> [00000026] main module debug: using access2 module "dvb"
> [00000223] main private debug: pre buffering
> [00000001] main vlc debug: removing all interfaces
> [00000216] main interface debug: thread -182395984 joined
> (src/interface/interface.c:236)
> [00000101] main module debug: unlocking module "wxwindows"
> [00000214] main interface debug: thread -163935312 joined
> (src/interface/interface.c:236)
> [00000200] main module debug: unlocking module "hotkeys"
> [00000001] main vlc debug: removing all playlists
> [00000223] main private debug: prebuffering done 0 bytes in 29s - 0
> kbytes/s
> [00000223] main private error: cannot pre fill buffer
> [00000219] main input warning: cannot create a stream_t from access
> [00000026] main module debug: unlocking module "dvb"
> [00000219] main input debug: thread -193729616 joined
> (src/input/input.c:290)
> [00000213] main playlist debug: thread -153424976 joined
> (src/playlist/playlist.c:130)
>
Please can any give me the solution for this problem
Thanks in Advance
Prasad
prasad wrote:
> Hi All ,
>
> Now I am able to catch the signal and can view in the xawtv software.
> But I am unable to view in the vlc.
> I tried the command line option as given below
> vlc -vvv --program 1320 dvb:12539000:0:3:27500000
> But nothing is coming . Please cany one send the command line
> options to view in the vlc.
>
> Thanks in Advance.
>
> Prasad
>
>
> Benjamin Pracht wrote:
>
>> On Fri, May 27, 2005, prasadbgr prasadbgr wrote :
>>
>>
>>>
>>> Hi All,
>>>
>>> I am using Hauppage wintv nexus-s card which is connected to
>>> direct cable from Dishtv.
>>> I am trying to scan for the channels with szap software, but
>>> unable to catch the signals.
>>>
>>> 1. Can I know vlc can do the scanning?
>>>
>>
>>
>> VLC can't scan a transponder ATM
>>
>>
>>
>>> 2. Or if any body tried with szap can you please send me the
>>> options to be set.
>>>
>>> 3. Once the signal is catched can i use vlc to stream?
>>>
>>>
>>
>>
>> Yes, VLC can stream data coming from a satellite feed. Have a look at
>> the doc. However, if szap doesn't work, I doubt VLC will catch a signal.
>> Is your setup (hardware and drivers) correct ?
>>
>>
>>
>>> Note : I am trying from India.
>>>
>>> Please any help would be appreciated.
>>>
>>> Thanks in Advance
>>> Prasad.
>>>
>>>
>>>
>>
>>
>>
>>
>
--
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html
More information about the streaming
mailing list