[streaming] Re: Video LAN Streaming

[Basel Alawieh]

Hello

I have tried to launch the videoLAN Client Player to Do the streaming -
Using the streaming wizard i inserted TTL =12 but it seems it is not taking
the TTL ---

Any hint

Regards
Bassel


----- Original Message ----- 
From: "Benjamin Pracht" <bigben+spam at videolan.org>
To: <streaming at videolan.org>
Sent: Friday, May 27, 2005 2:22 AM
Subject: [streaming] Re: Video LAN Streaming


> On Thu, May 26, 2005, balawieh at site.uottawa.ca wrote :
> > Hello
> >
> > I am trying to steam a video Film using Video Lan Server
> >
> > I have a Passport 8600 on one site and another 8600 on the other site. I
> > have configured Passport 8600 to be PIM-SMM enabled. I have added a
static
> > Channel that is the source
> > (172.25.10.1 to the group 232.0.1.0)
> >
> > The Source runs video LAn streamer( configured to UDP multicast to
> > 232.0.1.0) and is connected directly to one of the interfaces to of the
> > first 8600.
> >
> > On the other site,  the other 8600 is connected to a Baystack with all
> > ports IGMP version 2 enabled.
> > All the video clients are to run from the networks multicast 232.0.1.0.
>
> What does PIM-SMM stand for. Is it a typo ?
>
> AFAIK, you need IGMP v3 to be able to use PIM-SSM, IGMP v2 should be
> good for PIM-SM
>
> >
> > With other Multicast Application things work Fine , but with video LAN
> >
> >  the setup doesnot work , is it a problem with Video Lan (not supported
to
> > work with IP multicasting routing protocols)
> >
>
> Make sure you set an appropriate TTL. If not specified, the OS open uses
> a TTL of 1 for the multicast traffic. Use the --ttl 12 option, for
> instance, on server side.
>
> -- 
> BigBen
>
> -- 
> This is the streaming mailing-list, see http://www.videolan.org/streaming/
> To unsubscribe, please read http://www.videolan.org/support/lists.html
>

-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html