[streaming] Re: Streaming MPEG2 from Hauppauge PVR150 using VLC for Windows?

Henrik Kjær Nielsen hkn at lantic-systems.com
Fri Jun 10 16:32:40 CEST 2005


Hi,

When you say that you can make VLC stream MPEG from Hauppauge 350, are you then referring to Windows or Linux? In case it works for you in Windows, how does VLC's Media Resource Locator (MRL) look like?

Sure, the PVR cards will work as capture cards and can therefore deliver raw video and audio in addition to MPEG2.

Thanks


-----Original Message-----
From: streaming-bounce at videolan.org
[mailto:streaming-bounce at videolan.org]On Behalf Of list at scttransport.dk
Sent: Friday, June 10, 2005 12:13 PM
To: streaming at videolan.org
Subject: [streaming] Re: Streaming MPEG2 from Hauppauge PVR150 using VLC
for Windows?




Hi

As far as I know you can do what u want without problems.

I can stream mpeg-2 off of the Hauppauge pvr350 without transcoding.

As far as I know the pvr cards cant delivber anything else than mpeg data,
so if u can read from the card it should work?

> -----Original Message-----
> From: streaming-bounce at videolan.org [mailto:streaming-bounce at videolan.org]
> On Behalf Of Henrik Kjær Nielsen
> Sent: 10. juni 2005 09:42
> To: streaming at videolan.org
> Subject: [streaming] Streaming MPEG2 from Hauppauge PVR150 using VLC for
> Windows?
> 
> It is unclear to me if it is actually possible to stream live audio/video
> in compressed format (MPEG2) from a Hauppauge PVR-150 encoder card using
> VLC for Windows.
> More specifically, I want to stream the compressed data served by the
> Hauppauge onboard encoder instead of having VLC transcode the raw
> audio/video data.
> 
> The DirectShow frontend in VLC will only recognise the capture filters
> audio and video output pins (the "Audio Out" and "Capture" pins on the
> "Hauppauge WinTV PVR PCI II Capture" filter).
> To get access to the MPEG2 PS stream directly from the hardware encoder it
> is necessary to connect to the "MPEG" output pin on the "Hauppauge WinTV
> PVR PCI II Encoder" filter. The encoder filter itself must be connected to
> the capture filters "656" output pin.
> 
> My question is: Is it possible to instruct VLC to include the "Hauppauge
> WinTV PVR PCI II Encoder" filter in its graph and to directly stream the
> output from the "MPEG" pin?
> 
> Thanks
> 
> Kind Regards
> 
> Henrik
> 
> --
> This is the streaming mailing-list, see http://www.videolan.org/streaming/
> To unsubscribe, please read http://www.videolan.org/support/lists.html


-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html

-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html



More information about the streaming mailing list