[streaming] Diseqc problems using VLC + Spaun 17089NF multiswitch

Zoilo Gomez zoilo at xs4all.nl
Thu Jun 14 22:20:57 CEST 2007


I have a Spaun 17089NF 16-feed switch (4 sats * H/V * L/H), which is to 
be controlled using Diseqc.

If I use szap from dvb-apps, everything is fine: the correct feed is 
being selected and a lock is obtained.

But if I use VLC (0.8.6b Janus, with --dvb-satno=1/2/3/4), it does not 
work however ..... Also vlc-0.8.6 does not work eitther.


I have compared the source code between VLC and Szap, but I cannot find 
any implementation difference really. Also when I dump the DiSeqC 
command string being sent, it is correct (in accordance with Eutelsat 
specs) and identical to the DiSeqC command that is being sent by Szap.


It looks like there is something in the VLC implementation that causes 
the Spaun switch to ignore the DiSeqC command, and it then uses 
Voltage+22kHz instead.

Also if I first use szap to tune to the correct sat+pol+band, then 
Ctrl-C followed by immediate start of vlc: it works. If I wait 10 
seconds before I start VLC, then it does not work.


Anybody any suggestions?

Z.

-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html



More information about the streaming mailing list