[vlc-devel] Prolem with libdvbpsi7

Grant Taylor zl1wtt at yahoo.com
Sat Oct 13 05:46:13 CEST 2012

Hi all,

Has there been any progress with remapping of PIDs with using VLM files? I now on VLC 2.0.3 Twoflower using libdvbpsi7 still getting lots of random pixel blocks with all multiplex video streams on the same PIDs. So I have gone back to using libdvbpsi6 to generate multiplex video. Or has there been a change on how multiplex streams are generated through VLC and libdvbpsi7 from the older libdvbpsi6? 


 From: Grant Taylor <zl1wtt at yahoo.com>
To: "vlc-devel at videolan.org" <vlc-devel at videolan.org> 
Sent: Thursday, 14 June 2012 1:56 PM
Subject: Prolem with libdvbpsi7 

Hi all,

I have been working with this plug in for about five years now, putting together DVB streams.

Using vlm broadcast multiplex files I have been sending them to IP locations 
within my local network. My configuration files work ok with libdvbpsi6, but with libdvbpsi7 I am unable to set the stream PIDs. Therefore I am 
getting one set of PIDs for all streams and now unable to demultiplex 
them out.        
Key parts of my vlm file:

setup channel1 option sout-ts-program-pmt=102 
setup channel1 option sout-ts-pid-audio=101 
setup channel1 option sout-ts-pid-video=100

setup channel2 option sout-ts-program-pmt=202 
setup channel2 option sout-ts-pid-audio=201
setup channel2 option sout-ts-pid-video=200


 information looks like it's not be read from the configuration file and
 the TS PIDs are not been set. What changers have been made to this 
updated version that could lead to these problems?

I'm using VLC 2.0.1 and libdvbpsi7 within Ubuntu 12.04.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/vlc-devel/attachments/20121012/14575695/attachment.html>

More information about the vlc-devel mailing list