[vlc-devel] [PATCH] Add support for AMT multicast tunneling over non-multicast enabled network
Rémi Denis-Courmont
remi at remlab.net
Mon Sep 23 22:45:11 CEST 2019
Le tiistaina 17. syyskuuta 2019, 22.28.06 EEST Natalie Landsberg a écrit :
> Changes:
> 1. Fixed TRUE back to true. Dunno why my compiler doesn't catch this...
> 2. Fixed parantheses for if(unlikely(inet_ntop() ) == NULL) to
> if(unlikely(inet_ntop() == NULL) ) - "== NULL" is inside unlikely call
> correctly
> 3. removed GetDWBE where not used on buffer
>
> Compiler is finally working again and I pulled latest VLC from git.
> Hopefully it lines up with master now. ---
> modules/access/Makefile.am | 4 +
> modules/access/amt.c | 1434 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 1438 insertions(+)
> create mode 100644 modules/access/amt.c
>
> diff --git a/modules/access/Makefile.am b/modules/access/Makefile.am
> index 1b85e8dd18..756ca5cf59 100644
> --- a/modules/access/Makefile.am
> +++ b/modules/access/Makefile.am
> @@ -379,6 +379,10 @@ libudp_plugin_la_SOURCES = access/udp.c
> libudp_plugin_la_LIBADD = $(SOCKET_LIBS)
> access_LTLIBRARIES += libudp_plugin.la
>
> +libamt_plugin_la_SOURCES = access/amt.c
> +libamt_plugin_la_LIBADD = $(SOCKET_LIBS)
> +access_LTLIBRARIES += libamt_plugin.la
> +
> libunc_plugin_la_SOURCES = access/unc.c access/smb_common.h
> libunc_plugin_la_LIBADD = -lmpr -lnetapi32
> if HAVE_WIN32
> diff --git a/modules/access/amt.c b/modules/access/amt.c
> new file mode 100644
> index 0000000000..66f15449e9
> --- /dev/null
> +++ b/modules/access/amt.c
> @@ -0,0 +1,1434 @@
> +/**
> + * @file amt.c
> + * @brief Automatic Multicast Tunneling Protocol (AMT) file for VLC media
> player + * Allows multicast streaming when not in a multicast-enabled
> network + * Currently IPv4 is supported, but IPv6 is not yet.
> + *
> + * Copyright (C) 2018 VLC authors and VideoLAN
> + * Copyright (c) Juniper Networks, Inc., 2018. All rights reserved.
> + *
> + * Authors: Christophe Massiot <massiot at via.ecp.fr> - original
> UDP code + * Tristan Leteurtre <tooney at via.ecp.fr> -
> original UDP code + * Laurent Aimar <fenrir at via.ecp.fr>
> - original UDP code + * Jean-Paul Saman <jpsaman #_at_# m2x
> dot nl> - original UDP code + * Remi Denis-Courmont
> - original UDP code + * Natalie Landsberg
> <natalie.landsberg97 at gmail.com> - AMT support + * Wayne Brassem
> <wbrassem at rogers.com> - Added FQDN support + *
> + * This code is licensed to you under the GNU Lesser General Public License
> + * version 2.1 or later. You may not use this code except in compliance
> with + * the GNU Lesser General Public License.
> + * This code is not an official Juniper product.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public License
> + * as published by the Free Software Foundation; either version 2.1
> + * of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
> USA +
> ***************************************************************************
> */ +#ifdef HAVE_CONFIG_H
> +# include "config.h"
> +#endif
> +
> +#include <errno.h>
> +#include <ctype.h>
> +#include <assert.h>
> +#ifdef HAVE_ARPA_INET_H
> +# include <arpa/inet.h>
> +#endif
> +
> +#ifdef HAVE_SYS_SELECT_H
> +# include <sys/select.h>
> +#endif
It does not look like this can work.
> +
> +#ifdef HAVE_SYS_SOCKET_H
> +# include <sys/socket.h>
> +#endif
> +
> +#include <vlc_common.h>
> +#include <vlc_demux.h>
> +#include <vlc_plugin.h>
> +#include <vlc_access.h>
> +#include <vlc_network.h>
> +#include <vlc_block.h>
> +#include <vlc_interrupt.h>
> +#include <vlc_url.h>
> +
> +#ifdef HAVE_POLL
> + #include <poll.h>
> +#endif
> +#ifdef HAVE_SYS_UIO_H
> + #include <sys/uio.h>
> +#endif
> +
> +#define BUFFER_TEXT N_("Receive buffer")
> +#define BUFFER_LONGTEXT N_("AMT receive buffer size (bytes)" )
> +#define TIMEOUT_TEXT N_("Native multicast timeout (sec)")
> +#define AMT_TIMEOUT_TEXT N_("AMT timeout (sec)")
> +#define AMT_RELAY_ADDRESS N_("AMT relay (IP address or FQDN)")
> +#define AMT_RELAY_ADDR_LONG N_("AMT relay anycast address, or specify the
> relay you want by address or fully qualified domain name") +#define
> AMT_DEFAULT_RELAY N_("amt-relay.m2icast.net")
> +
> +/**************************************************************************
> *** + * Various Lengths of Msgs or Hdrs
> +
> ***************************************************************************
> **/ +#define MAC_LEN 6 /* length of generated MAC in bytes */
> +#define NONCE_LEN 4 /* length of nonce in bytes */
> +
> +#define MSG_TYPE_LEN 1 /* length of msg type */
> +#define RELAY_QUERY_MSG_LEN 48 /* total length of relay query */
> +#define RELAY_ADV_MSG_LEN 12 /* length of relay advertisement message
> */ +#define IGMP_QUERY_LEN 24 /* length of encapsulated IGMP query
> message */ +#define IGMP_REPORT_LEN 20
> +#define AMT_HDR_LEN 2 /* length of AMT header on a packet */
> +#define IP_HDR_LEN 20 /* length of standard IP header */
> +#define IP_HDR_IGMP_LEN 24 /* length of IP header with an IGMP report
> */ +#define UDP_HDR_LEN 8 /* length of standard UDP header */
> +#define AMT_REQUEST_MSG_LEN 9
> +#define AMT_DISCO_MSG_LEN 8
> +
> +/**************************************************************************
> *** + * Different AMT Message Types
> +
> ***************************************************************************
> **/ +#define AMT_RELAY_DISCO 1 /* relay discovery */
> +#define AMT_RELAY_ADV 2 /* relay advertisement */
> +#define AMT_REQUEST 3 /* request */
> +#define AMT_MEM_QUERY 4 /* membership query */
> +#define AMT_MEM_UPD 5 /* membership update */
> +#define AMT_MULT_DATA 6 /* multicast data */
> +#define AMT_TEARDOWN 7 /* teardown (not currently supported) */
> +
> +/**************************************************************************
> *** + * Different IGMP Message Types
> +
> ***************************************************************************
> **/ +#define AMT_IGMPV3_MEMBERSHIP_QUERY_TYPEID 0x11
> +#define AMT_IGMPV3_MEMBERSHIP_REPORT_TYPEID 0x22
> +/* IGMPv2, interoperability */
> +#define AMT_IGMPV1_MEMBERSHIP_REPORT_TYPEID 0x12
> +#define AMT_IGMPV2_MEMBERSHIP_REPORT_TYPEID 0x16
> +#define AMT_IGMPV2_MEMBERSHIP_LEAVE_TYPEID 0x17
> +
> +#define AMT_IGMP_INCLUDE 0x01
> +#define AMT_IGMP_EXCLUDE 0x02
> +#define AMT_IGMP_INCLUDE_CHANGE 0x03
> +#define AMT_IGMP_EXCLUDE_CHANGE 0x04
> +#define AMT_IGMP_ALLOW 0x05
> +#define AMT_IGMP_BLOCK 0x06
> +
> +#define MCAST_ANYCAST "0.0.0.0"
> +#define MCAST_ALLHOSTS "224.0.0.22"
> +#define LOCAL_LOOPBACK "127.0.0.1"
> +#define AMT_PORT 2268
> +
> +#define DEFAULT_MTU (1500u - (20 + 8))
> +#define MAX_IPV4_UDP (65535u - (20 + 8))
> +
> +/* IPv4 Header Format */
> +typedef struct _amt_ip {
> + uint8_t ver_ihl;
> + uint8_t tos;
> + uint16_t tot_len;
> + uint16_t id;
> + uint16_t frag_off;
> + uint8_t ttl;
> + uint8_t protocol;
> + uint16_t check;
> + uint32_t srcAddr;
> + uint32_t destAddr;
> +} amt_ip_t;
> +
> +/* IPv4 Header Format with options field */
> +typedef struct _amt_ip_alert {
> + uint8_t ver_ihl;
> + uint8_t tos;
> + uint16_t tot_len;
> + uint16_t id;
> + uint16_t frag_off;
> + uint8_t ttl;
> + uint8_t protocol;
> + uint16_t check;
> + uint32_t srcAddr;
> + uint32_t destAddr;
> + uint32_t options;
> +} amt_ip_alert_t;
> +
> +/* IGMPv3 Group Record Format (RFC3376) */
> +typedef struct _amt_igmpv3_groupRecord {
> + uint8_t type;
> + uint8_t auxDatalen;
> + uint16_t nSrc;
> + uint32_t ssm;
> + uint32_t srcIP[1];
> +} amt_igmpv3_groupRecord_t;
> +
> +/* IGMPv3 Membership Report Format (RFC3376) */
> +typedef struct _amt_igmpv3_membership_report {
> + uint8_t type;
> + uint8_t resv;
> + uint16_t checksum;
> + uint16_t resv2;
> + uint16_t nGroupRecord;
> + amt_igmpv3_groupRecord_t grp[1];
> +} amt_igmpv3_membership_report_t;
> +
> +/* IGMPv3 Membership Query Format (RFC3376) */
> +typedef struct _amt_igmpv3_membership_query {
> + uint8_t type;
> + uint8_t max_resp_code; /* in 100ms, Max Resp Time = (mant | 0x10) <<
> (exp + 3) */ + uint32_t checksum;
> + uint32_t ssmIP;
> + uint8_t s_qrv;
> + uint8_t qqic; /* in second, query Time = (mant | 0x10) <<
> (exp + 3) */ + uint16_t nSrc;
> + uint32_t srcIP[1];
> +} amt_igmpv3_membership_query_t;
> +
> +/* ATM Membership Update Format (RFC7450) */
> +typedef struct _amt_membership_update_msg {
> + amt_ip_alert_t ipHead;
> + amt_igmpv3_membership_report_t memReport;
> +} amt_membership_update_msg_t;
> +
> +/* AMT Functions */
> +static int amt_sockets_init( stream_t *p_access );
> +static void amt_send_relay_discovery_msg( stream_t *p_access, char
> *relay_ip ); +static void amt_send_relay_request( stream_t *p_access, char
> *relay_ip ); +static int amt_joinSSM_group( stream_t *p_access );
> +static int amt_joinASM_group( stream_t *p_access );
> +static int amt_leaveASM_group( stream_t *p_access );
> +static int amt_leaveSSM_group( stream_t *p_access );
> +static bool amt_rcv_relay_adv( stream_t *p_access );
> +static bool amt_rcv_relay_mem_query( stream_t *p_access );
> +static void amt_send_mem_update( stream_t *p_access, char *relay_ip, bool
> leave ); +static bool open_amt_tunnel( stream_t *p_access );
> +static void *amt_mem_upd( void *data );
> +
> +/* Struct to hold AMT state */
> +typedef struct _access_sys_t
> +{
> + char *mcastGroup;
> + char *mcastSrc;
> + char *relay;
> + char relayDisco[INET_ADDRSTRLEN];
> + block_t *overflow_block;
> +
> + vlc_thread_t updateThread;
> + vlc_tick_t queryTime;
> +
> + /* Mulicast group and source */
> + struct sockaddr_in mcastGroupAddr;
> + struct sockaddr_in mcastSrcAddr;
> +
> + /* AMT relay imformation */
> + struct sockaddr_in relayDiscoAddr;
> + struct sockaddr_in relayAddr;
> + struct sockaddr_in stLocalAddr;
> + struct sockaddr_in stSvrAddr;
> +
> + /* AMT Relay Membership Query data (RFC7450) */
> + struct relay_mem_query_msg_t {
> + uint32_t ulRcvedNonce;
> + uint8_t type;
> + uint8_t uchaMAC[MAC_LEN];
> + uint8_t uchaIGMP[IGMP_QUERY_LEN];
> + } relay_mem_query_msg;
> +
> + /* AMT Relay Advertisement data (RFC7450) */
> + struct relay_adv_msg_t {
> + uint32_t ulRcvNonce;
> + uint32_t ipAddr;
> + uint8_t type;
> + } relay_adv_msg;
> +
> + amt_ip_t relay_ip_hdr;
> + amt_igmpv3_membership_query_t relay_igmp_query;
> + ssize_t mtu;
> +
> + uint32_t glob_ulNonce;
> + uint32_t ulRelayNonce;
> +
> + int fd;
> + int sAMT;
> + int sQuery;
> + int timeout;
> + int amtTimeout;
> +
> + bool tryAMT;
> + bool threadReady;
> +} access_sys_t;
Remove write-only and unused members.
> +
> +/* Standard open/close functions */
> +static int Open (vlc_object_t *);
> +static void Close (vlc_object_t *);
> +
> +/* Utility functions */
> +static unsigned short get_checksum( unsigned short *buffer, int nLen );
> +static void make_report( amt_igmpv3_membership_report_t *mr );
> +static void make_ip_header( amt_ip_alert_t *p_ipHead );
> +
> +vlc_module_begin ()
> + set_shortname( N_("AMT" ) )
> + set_description( N_("AMT input") )
> + set_category( CAT_INPUT )
> + set_subcategory( SUBCAT_INPUT_ACCESS )
> +
> + add_integer( "amt-timeout", 5, AMT_TIMEOUT_TEXT, NULL, true )
> + add_integer( "amt-native-timeout", 5, TIMEOUT_TEXT, NULL, true )
> + add_string( "amt-relay", AMT_DEFAULT_RELAY, AMT_RELAY_ADDRESS,
> AMT_RELAY_ADDR_LONG, true ) +
> + set_capability( "access", 0 )
> + add_shortcut( "amt" )
> +
> + set_callbacks( Open, Close )
> +vlc_module_end ()
> +
> +/**************************************************************************
> *** + * Local prototypes
> +
> ***************************************************************************
> **/ +static block_t *BlockUDP( stream_t *, bool * );
> +static int Control( stream_t *, int, va_list );
> +
> +/**************************************************************************
> *** + * Open: Open a connection to the multicast feed
> +
> ***************************************************************************
> **/ +static int Open( vlc_object_t *p_this )
> +{
> + stream_t *p_access = (stream_t*) p_this;
> + access_sys_t *sys = NULL;
> + struct addrinfo hints, *serverinfo = NULL;
> + struct sockaddr_in *server_addr;
> + char *psz_name = NULL, *saveptr, *psz_strtok_r,
> ip_buffer[INET_ADDRSTRLEN]; + int i_bind_port = 1234,
> i_server_port = 0, VLC_ret = VLC_SUCCESS, response; + vlc_url_t
> url;
> +
> + if( p_access->b_preparsing )
> + return VLC_EGENERIC;
> +
> + /* Allocate the structure for holding AMT info and zeroize it */
> + sys = vlc_obj_calloc( p_this, 1, sizeof( *sys ) );
> + if( unlikely( sys == NULL ) )
> + return VLC_ENOMEM;
> +
> + /* The standard MPEG-2 transport is 188 bytes. 7 packets fit into a
> standard 1500 byte Ethernet frame */ + sys->mtu = 7 * 188;
> +
> + /* Protective packet overflow buffer designed to accommodate maximum
> IPv4 UDP payload minus the anticapated MTU */ + sys->overflow_block =
> block_Alloc(MAX_IPV4_UDP - sys->mtu);
> + if( unlikely( sys->overflow_block == NULL ) )
> + return VLC_ENOMEM;
> +
> + p_access->p_sys = sys;
> +
> + /* Set up p_access */
> + ACCESS_SET_CALLBACKS( NULL, BlockUDP, Control, NULL );
> +
> + if( !p_access->psz_location )
> + return VLC_EGENERIC;
> +
> + psz_name = strdup( p_access->psz_location );
> + if ( unlikely( psz_name == NULL ) )
> + return VLC_ENOMEM;
> +
> + /* Parse psz_name syntax :
> + * [serveraddr[:serverport]][@[bindaddr]:[bindport]] */
> + if( vlc_UrlParse( &url, p_access->psz_url ) != 0 )
> + {
> + msg_Err( p_access, "Invalid URL: %s", p_access->psz_url );
> + VLC_ret = VLC_EGENERIC;
> + goto cleanup;
> + }
> +
> + /* Determining the multicast source and group depends on the URL
> provided */ + /*
> */ + /* The address(es) in the URL can be in the form of
> IP address or FQDN */ + /* By calling vlc_getaaddrinfo() you get it
> in IP form either way */ + /*
> */ + /* Case 1:
> amt://<source-ip-address>@<multicast-group-ip-address> */ + /*
> */ +
> /* sys->mcastSrc = <source-ip-address>
> */ + /* sys->mcastSrcAddr = inet_pton( sys->mcastSrc )
> */ + /*
> */ + /* sys->mcastGroup =
> <multicast-group-ip-address> */ + /*
> sys->mcastGroupAddr = inet_pton( sys->mcastGroup ) */ + /*
> */ +
> /* Case 2: amt://<multicast-group-ip-address>
> */ + /*
> */ + /* sys->mcastSrc = MCAST_ANYCAST = "0.0.0.0"
> */ + /* sys->mcastSrcAddr = inet_pton( sys->mcastSrc
> ) = 0 */ + /*
> */ + /* sys->mcastGroup =
> <multicast-group-ip-address> */ + /*
> sys->mcastGroupAddr = inet_pton( sys->mcastGroup ) */ + /*
> */ +
> + /* If UDP port provided then assign port to stream */
> + if( url.i_port > 0 )
> + i_bind_port = url.i_port;
> +
> + msg_Dbg( p_access, "Opening multicast: %s:%d local=%s:%d",
> url.psz_host, i_server_port, url.psz_path, i_bind_port ); +
> + /* Initialize hints prior to call to vlc_getaddrinfo with either IP
> address or FQDN */ + memset( &hints, 0, sizeof( hints ));
> + hints.ai_family = AF_INET; /* Setting to AF_UNSPEC accepts both IPv4
> and IPv6 */ + hints.ai_socktype = SOCK_DGRAM;
> +
> + /* Retrieve list of multicast addresses matching the multicast group
> identifier */ + response = vlc_getaddrinfo( url.psz_host, AMT_PORT,
> &hints, &serverinfo ); +
> + /* If an error returned print reason and exit */
> + if( response != 0 )
> + {
> + msg_Err( p_access, "Could not find multicast group %s, reason: %s",
> url.psz_host, gai_strerror(response) ); + VLC_ret = VLC_EGENERIC;
> + goto cleanup;
> + }
> +
> + /* Convert binary socket address to string */
> + server_addr = (struct sockaddr_in *) serverinfo->ai_addr;
> + if( unlikely( inet_ntop(AF_INET, &(server_addr->sin_addr), ip_buffer,
> INET_ADDRSTRLEN) == NULL ) ) + {
> + int errConv = errno;
> + msg_Err(p_access, "Could not convert binary socket address to
> string: %s", gai_strerror(errConv)); + goto cleanup;
> + }
> +
> + /* Store the binary socket representation of multicast group address */
> + sys->mcastGroupAddr = *server_addr;
> +
> + /* Release the allocated memory */
> + freeaddrinfo( serverinfo );
> + serverinfo = NULL;
> +
> + /* Store string representation */
> + sys->mcastGroup = strdup( ip_buffer );
You really should not do that; there are no reasons why you need to keep this
as a string. This is not the first time this problem is raised in this very
patchset, nor is this the only occurence.
> + if( unlikely( sys->mcastGroup == NULL ) )
> + {
> + VLC_ret = VLC_ENOMEM;
> + goto cleanup;
> + }
> +
> + msg_Dbg( p_access, "Setting multicast group address to %s",
> sys->mcastGroup); +
> + /* Extract the source from the URL, or the multicast group when no
> source is provided */
> + if ( !( psz_strtok_r = strtok_r( psz_name, "@",
> &saveptr ) ) ) + {
DO NOT use assignment as expression unless syntactically unavoidable.
> + msg_Err( p_access, "Could not parse location %s", psz_name);
> + VLC_ret = VLC_EGENERIC;
> + goto cleanup;
> + }
> +
> + /* Store the string representation */
> + sys->mcastSrc = strdup( psz_strtok_r );
> + if( unlikely( sys->mcastSrc == NULL ) )
> + {
> + VLC_ret = VLC_ENOMEM;
> + goto cleanup;
> + }
> +
> + /* If strings are equal then no multicast source has been specified, so
> try anycast */ + if( strcmp( url.psz_host, sys->mcastSrc ) == 0 )
> + {
> + free( sys->mcastSrc );
> + sys->mcastSrc = strdup(MCAST_ANYCAST);
> + sys->mcastSrcAddr.sin_addr.s_addr = 0;
> + msg_Dbg( p_access, "No multicast source address specified, trying
> ASM..."); + }
> +
> + /* retrieve list of source addresses matching the multicast source
> identifier */ + response = vlc_getaddrinfo( sys->mcastSrc, AMT_PORT,
> &hints, &serverinfo ); +
> + /* If an error returned print reason and exit */
> + if( response != 0 )
> + {
> + msg_Err( p_access, "Could not find multicast source %s, reason:
> %s", sys->mcastSrc, gai_strerror(response) ); + VLC_ret =
> VLC_EGENERIC;
> + goto cleanup;
> + }
> +
> + /* Convert binary socket address to string */
> + server_addr = (struct sockaddr_in *) serverinfo->ai_addr;
> + if( unlikely( inet_ntop(AF_INET, &(server_addr->sin_addr), ip_buffer,
> INET_ADDRSTRLEN) == NULL ) ) + {
> + int errConv = errno;
> + msg_Err(p_access, "Could not binary socket address to string: %s",
> gai_strerror(errConv)); + goto cleanup;
> + }
> +
> + /* Store the binary socket representation of multicast source address
> */ + sys->mcastSrcAddr = *server_addr;
> +
> + /* free the original source address buffer (IP or FQDN) and assign it
> just the IP address */ + free( sys->mcastSrc );
> +
> + /* Store string representation */
> + sys->mcastSrc = strdup( ip_buffer );
> + if( unlikely( sys->mcastSrc == NULL ) )
> + {
> + VLC_ret = VLC_ENOMEM;
> + goto cleanup;
> + }
> +
> + msg_Dbg( p_access, "Setting multicast source address to %s",
> sys->mcastSrc); +
> + /* Pull the AMT relay address from the settings */
> + sys->relay = var_InheritString( p_access, "amt-relay" );
> + if( unlikely( sys->relay == NULL ) )
> + {
> + msg_Err( p_access, "No relay anycast or unicast address specified."
> ); + VLC_ret = VLC_EGENERIC;
> + goto cleanup;
> + }
> +
> + msg_Dbg( p_access, "Addresses: mcastGroup: %s mcastSrc: %s relay: %s",
> \ + sys->mcastGroup, sys->mcastSrc, sys->relay);
> +
> + /* Native multicast file descriptor */
> + sys->fd = net_OpenDgram( p_access, sys->mcastGroup, i_bind_port,
> + sys->mcastSrc, i_server_port, IPPROTO_UDP );
> + if( sys->fd == -1 )
> + {
> + msg_Err( p_access, "cannot open socket" );
> + sys->sAMT = -1;
> + sys->sQuery = -1;
> + VLC_ret = VLC_EGENERIC;
> + goto cleanup;
> + }
> +
> + sys->timeout = var_InheritInteger( p_access, "amt-native-timeout");
> + if( sys->timeout > 0)
> + sys->timeout *= 1000;
> +
> + sys->amtTimeout = var_InheritInteger( p_access, "amt-timeout" );
> + if( sys->amtTimeout > 0)
> + sys->amtTimeout *= 1000;
> +
> + sys->tryAMT = false;
> + sys->threadReady = false;
> +
> +cleanup: /* fall through */
> +
> + /* release the allocated memory */
> + free( psz_name );
> + vlc_UrlClean( &url );
> + if( serverinfo )
> + freeaddrinfo( serverinfo );
> +
> + /* if an error occurred free the memory */
> + if ( VLC_ret != VLC_SUCCESS )
> + {
> + msg_Dbg( p_access, "Open(): Before free( sys-> sys->Addr ) #4" );
> + free( sys->mcastGroup );
> + free( sys->mcastSrc );
> + }
> +
> + return VLC_ret;
> +}
> +
> +/**************************************************************************
> *** + * Close: Cancel thread and free data structures
> +
> ***************************************************************************
> **/ +static void Close( vlc_object_t *p_this )
> +{
> + stream_t *p_access = (stream_t*)p_this;
> + access_sys_t *sys = p_access->p_sys;
> +
> + msg_Dbg( p_access, "Closing AMT plugin" );
> +
> + /* If using AMT tunneling send leave message and free the relay
> addresses */ + if ( sys->tryAMT )
> + {
> + /* Prepare socket options */
> + if( sys->mcastSrcAddr.sin_addr.s_addr )
> + amt_leaveSSM_group( p_access );
> + else
> + amt_leaveASM_group( p_access );
> +
> + /* Send IGMP leave message */
> + amt_send_mem_update( p_access, sys->relayDisco, true );
> +
> + free( sys->relay );
> + }
> +
> + /* If overflow block allocated then free the memory */
> + if( sys->overflow_block )
> + block_Release( sys->overflow_block );
> +
> + /* If membership thread spawned cancel it */
> + if( sys->threadReady )
> + {
> + msg_Dbg( p_access, "Canceling IGMP membership thread" );
> + sys->threadReady = false;
> + vlc_cancel( sys->updateThread );
> + vlc_join( sys->updateThread, NULL );
> + }
> +
> + if( sys->mcastGroup )
> + free( sys->mcastGroup );
> + if( sys->mcastSrc )
> + free( sys->mcastSrc );
> +
> + net_Close( sys->fd );
> + if( sys->sAMT != -1 )
> + net_Close( sys->sAMT );
> + if( sys->sQuery != -1 )
> + net_Close( sys->sQuery );
> +
> + msg_Dbg( p_access, "Exiting AMT plugin" );
> +}
> +
> +/**************************************************************************
> *** + * Control: Define stream controls
> +
> ***************************************************************************
> **/ +static int Control( stream_t *p_access, int i_query, va_list args ) +{
> + switch( i_query )
> + {
> + case STREAM_CAN_SEEK:
> + case STREAM_CAN_FASTSEEK:
> + case STREAM_CAN_PAUSE:
> + case STREAM_CAN_CONTROL_PACE:
> + *va_arg( args, bool * ) = false;
> + break;
> +
> + case STREAM_GET_PTS_DELAY:
> + *va_arg( args, vlc_tick_t * ) =
> + VLC_TICK_FROM_MS(var_InheritInteger( p_access,
> "network-caching" )); + break;
> +
> + default:
> + return VLC_EGENERIC;
> + }
> +
> + return VLC_SUCCESS;
> +}
> +
> +/**************************************************************************
> *** + * BlockUDP: Responsible for returning the multicast payload
> + * BlockUDP: Sections of code are based upon BlockUDP code in udp.c
> + *
> + * Default MTU based on number of MPEG-2 transports carried in a 1500 byte
> Ethernet frame + * however the code is able to receive maximal IPv4 UDP
> frames and then adjusts the MTU +
> ***************************************************************************
> **/ +static block_t *BlockUDP(stream_t *p_access, bool *restrict eof)
> +{
> + access_sys_t *sys = p_access->p_sys;
> + ssize_t len = 0, shift = 0, tunnel = IP_HDR_LEN + UDP_HDR_LEN +
> AMT_HDR_LEN; +
> + /* Allocate anticipated MTU buffer for holding the UDP packet suitable
> for native or AMT tunneled multicast */ + block_t *pkt = block_Alloc(
> sys->mtu + tunnel );
> + if ( unlikely( pkt == NULL ) )
> + return NULL;
> +
> + /* Structure initialized to hold anticipated MTU buffer along with
> protective overflow buffer */ + struct iovec iov[] = {{
> + .iov_base = pkt->p_buffer,
> + .iov_len = sys->mtu + tunnel,
> + },{
> + .iov_base = sys->overflow_block->p_buffer,
> + .iov_len = sys->overflow_block->i_buffer,
> + }};
> +
> + /* References the two element array above to be passed into recvmsg */
> + struct msghdr msg = {
> + .msg_iov = iov,
> + .msg_iovlen = 2,
> + };
> +
> + struct pollfd ufd[1];
> +
> + if( sys->tryAMT )
> + ufd[0].fd = sys->sAMT; /* AMT tunneling file descriptor */
> + else
> + ufd[0].fd = sys->fd; /* Native multicast file descriptor */
> + ufd[0].events = POLLIN;
> +
> + switch (vlc_poll_i11e(ufd, 1, sys->timeout))
> + {
> + case 0:
> + if( !sys->tryAMT )
> + {
> + msg_Err(p_access, "Native multicast receive time-out");
> + if( !open_amt_tunnel( p_access ) )
> + goto error;
> + break;
> + }
> + else
> + {
> + *eof = true;
> + }
> + /* fall through */
> + case -1:
> + goto error;
> + }
> +
> + /* If using AMT tunneling perform basic checks and point to beginning
> of the payload */
> + if( sys->tryAMT )
> + {
> + len = recvmsg( sys->sAMT, &msg, 0 );
Why do you use recvmsg()?
> +
> + /* Check for the integrity of the received AMT packet */
> + if( len < 0 || *(pkt->p_buffer) != AMT_MULT_DATA )
> + goto error;
> +
> + /* Set the offet to the first byte of the payload */
> + shift += tunnel;
> +
> + /* If the length received is less than the AMT tunnel header then
> it's truncated */ + if( len < tunnel )
> + {
> + msg_Err(p_access, "%zd bytes packet truncated (MTU was %zd)",
> len, sys->mtu); + pkt->i_flags |= BLOCK_FLAG_CORRUPTED;
> + }
> +
> + /* Otherwise subtract the length of the AMT encapsulation from the
> packet received */ + else
> + {
> + len -= tunnel;
> + }
> + }
> + /* Otherwise pull native multicast */
> + else
> + {
> + len = recvmsg(sys->fd, &msg, 0);
> + }
> +
> + /* If the payload length is greater than the MTU then the overflow
> buffer was utilized */ + if ( unlikely( len > sys->mtu ) )
> + {
> + msg_Warn(p_access, "%zd bytes packet received (MTU was %zd),
> adjusting mtu", len, sys->mtu); +
> + block_t *gather_block = sys->overflow_block;
> +
> + /* Allocate a new overflow buffer based on the received payload
> length */ + sys->overflow_block = block_Alloc(MAX_IPV4_UDP - len);
> +
> + /* Set number of bytes consumed in the overflow block */
> + gather_block->i_buffer = len - sys->mtu;
> +
> + /* Chain the anticipated packet and overflow buffers, copy into a
> single buffer and free the chain */ + pkt->p_next = gather_block;
> + pkt = block_ChainGather( pkt );
> +
> + /* Adjust the anticipated MTU to match the payload received */
> + sys->mtu = len;
> + }
> +
> + /* Set the offset to payload start */
> + pkt->p_buffer += shift;
> + pkt->i_buffer -= shift;
> +
> + return pkt;
> +
> +error:
> + block_Release( pkt );
> + return NULL;
> +}
> +
> +/**************************************************************************
> *** + * open_amt_tunnel: Create an AMT tunnel to the AMT relay
> +
> ***************************************************************************
> **/ +static bool open_amt_tunnel( stream_t *p_access )
> +{
> + struct addrinfo hints, *serverinfo, *server;
> + access_sys_t *sys = p_access->p_sys;
> +
> + memset( &hints, 0, sizeof( hints ));
> + hints.ai_family = AF_INET; /* Setting to AF_UNSPEC accepts both IPv4
> and IPv6 */ + hints.ai_socktype = SOCK_DGRAM;
> +
> + msg_Dbg( p_access, "Attempting AMT to %s...", sys->relay);
> + sys->tryAMT = true;
> +
> + /* Retrieve list of addresses matching the AMT relay */
> + int response = vlc_getaddrinfo( sys->relay, AMT_PORT, &hints,
> &serverinfo ); +
> + /* If an error returned print reason and exit */
> + if( response != 0 )
> + {
> + msg_Err( p_access, "Could not find relay %s, reason: %s",
> sys->relay, gai_strerror(response) ); + goto error;
> + }
> +
> + /* Iterate through the list of sockets to find one that works */
> + for (server = serverinfo; server != NULL; server = server->ai_next)
> + {
> + struct sockaddr_in *server_addr = (struct sockaddr_in *)
> server->ai_addr; + char relay_ip[INET_ADDRSTRLEN];
> +
> + /* Convert to binary representation */
> + if( unlikely( inet_ntop(AF_INET, &(server_addr->sin_addr),
> relay_ip, INET_ADDRSTRLEN) == NULL ) ) + {
> + int errConv = errno;
> + msg_Err(p_access, "Could not convert relay ip to binary
> representation: %s", gai_strerror(errConv)); + goto error;
> + }
> +
> + /* Store string representation */
> + memcpy(sys->relayDisco, relay_ip, INET_ADDRSTRLEN);
> + if( unlikely( sys->relayDisco == NULL ) )
> + {
> + goto error;
> + }
> +
> + msg_Dbg( p_access, "Trying AMT Server: %s", sys->relayDisco);
> +
> + /* Store the binary representation */
> + sys->relayDiscoAddr.sin_addr = server_addr->sin_addr;
> +
> + /* If can't open socket try any others in list */
> + if( amt_sockets_init( p_access ) != 0 )
> + msg_Err( p_access, "Error initializing socket to %s", relay_ip
> ); +
> + /* Otherwise negotiate with AMT relay and confirm you can pull a
> UDP packet */ + else
> + {
> + amt_send_relay_discovery_msg( p_access, relay_ip );
> + msg_Dbg( p_access, "Sent relay AMT discovery message to %s",
> relay_ip ); +
> + if( !amt_rcv_relay_adv( p_access ) )
> + {
> + msg_Err( p_access, "Error receiving AMT relay advertisement
> msg from %s, skipping", relay_ip ); + goto error;
> + }
> + msg_Dbg( p_access, "Received AMT relay advertisement from %s",
> relay_ip ); +
> + amt_send_relay_request( p_access, relay_ip );
> + msg_Dbg( p_access, "Sent AMT relay request message to %s",
> relay_ip ); +
> + if( !amt_rcv_relay_mem_query( p_access ) )
> + {
> + msg_Err( p_access, "Could not receive AMT relay membership
> query from %s, reason: %s", relay_ip, vlc_strerror(errno)); +
> goto error;
> + }
> + msg_Dbg( p_access, "Received AMT relay membership query from
> %s", relay_ip ); +
> + /* If single source multicast send SSM join */
> + if( sys->mcastSrcAddr.sin_addr.s_addr )
> + {
> + if( amt_joinSSM_group( p_access ) != 0 )
> + {
> + msg_Err( p_access, "Error joining SSM %s",
> vlc_strerror(errno) ); + goto error;
> + }
> + msg_Dbg( p_access, "Joined SSM src: %s group: %s",
> sys->mcastSrc, sys->mcastGroup ); + }
> +
> + /* If any source multicast send ASM join */
> + else {
> + if( amt_joinASM_group( p_access ) != 0 )
> + {
> + msg_Err( p_access, "Error joining ASM %s",
> vlc_strerror(errno) ); + goto error;
> + }
> + msg_Dbg( p_access, "Joined ASM group: %s", sys->mcastGroup
> ); + }
> +
> + bool eof=false;
> + block_t *pkt;
> +
> + /* Confirm that you can pull a UDP packet from the socket */
> + if ( !(pkt = BlockUDP( p_access, &eof )) )
> + msg_Err( p_access, "Unable to receive UDP packet from AMT
> relay %s for multicast group %s", relay_ip, sys->mcastGroup ); +
> else
> + {
> + block_Release( pkt );
> + msg_Dbg( p_access, "Got UDP packet from multicast group %s
> via AMT relay %s, continuing...", sys->mcastGroup, relay_ip ); +
> break; /* found an active server sending UDP packets, so exit loop */
> + }
> + }
> + }
> +
> + /* if server is NULL then no AMT relay is responding */
> + if (server == NULL)
> + {
> + msg_Err( p_access, "No AMT servers responding" );
> + goto error;
> + }
> +
> + sys->queryTime = vlc_tick_now() / CLOCK_FREQ;
> +
> + /* release the allocated memory */
> + freeaddrinfo( serverinfo );
> + return true;
> +
> +error:
> + sys->threadReady = false;
> + if( serverinfo )
> + freeaddrinfo( serverinfo );
> + return false;
> +}
> +
> +/**
> + * Calculate checksum
> + * */
> +static unsigned short get_checksum( unsigned short *buffer, int nLen )
> +{
> + int nleft = nLen;
> + int sum = 0;
> + unsigned short *w = buffer;
> + unsigned short answer = 0;
> +
> + while (nleft > 1)
> + {
> + sum += *w++;
> + nleft -= 2;
> + }
> + if (nleft == 1)
> + {
> + *(unsigned char*)(&answer) = *(unsigned char*)w;
> + sum += answer;
> + }
> + sum = (sum >> 16) + (sum & 0xffff);
> + answer = ~sum;
> + return (answer);
> +}
> +
> +/**
> + * Make IGMP Membership report
> + * */
> +static void make_report( amt_igmpv3_membership_report_t *mr )
> +{
> + mr->type = AMT_IGMPV3_MEMBERSHIP_REPORT_TYPEID;
> + mr->resv = 0;
> + mr->checksum = 0;
> + mr->resv2 = 0;
> + mr->nGroupRecord = htons(1);
> +}
> +
> +/**
> + * Make IP header
> + * */
> +static void make_ip_header( amt_ip_alert_t *p_ipHead )
> +{
> + p_ipHead->ver_ihl = 0x46;
> + p_ipHead->tos = 0xc0;
> + p_ipHead->tot_len = htons( IP_HDR_IGMP_LEN + IGMP_REPORT_LEN );
> + p_ipHead->id = 0x00;
> + p_ipHead->frag_off = 0x0000;
> + p_ipHead->ttl = 0x01;
> + p_ipHead->protocol = 0x02;
> + p_ipHead->check = 0;
> + p_ipHead->srcAddr = INADDR_ANY;
> + p_ipHead->options = 0x0000;
> +}
> +
> +/** Create relay discovery socket, query socket, UDP socket and
> + * fills in relay anycast address for discovery
> + * return 0 if successful, -1 if not
> + */
> +static int amt_sockets_init( stream_t *p_access )
> +{
> + struct sockaddr_in rcvAddr;
> + access_sys_t *sys = p_access->p_sys;
> + memset( &rcvAddr, 0, sizeof(struct sockaddr_in) );
> + int enable = 0, res = 0;
> +
> + /* Relay anycast address for discovery */
> + sys->relayDiscoAddr.sin_family = AF_INET;
> + sys->relayDiscoAddr.sin_port = htons( AMT_PORT );
> +
> + /* create UDP socket */
> + sys->sAMT = vlc_socket( AF_INET, SOCK_DGRAM, IPPROTO_UDP, true );
> + if( sys->sAMT == -1 )
> + {
> + msg_Err( p_access, "Failed to create UDP socket" );
> + goto error;
> + }
> +
> + res = setsockopt(sys->sAMT, IPPROTO_IP, IP_PKTINFO, &enable,
> sizeof(enable)); + if(res < 0)
> + {
> + msg_Err( p_access, "Couldn't set socket options for IPPROTO_IP,
> IP_PKTINFO\n %s", vlc_strerror(errno)); + goto error;
I am pretty damn sure that I already rejected that in previous review.
>
> + }
> +
> + res = setsockopt(sys->sAMT, SOL_SOCKET, SO_REUSEADDR, &enable,
> sizeof(enable)); + if(res < 0)
> + {
> + msg_Err( p_access, "Couldn't make socket reusable");
> + goto error;
> + }
> +
> + rcvAddr.sin_family = AF_INET;
> + rcvAddr.sin_port = htons( 0 );
> + rcvAddr.sin_addr.s_addr = INADDR_ANY;
> +
> + if( bind(sys->sAMT, (struct sockaddr *)&rcvAddr, sizeof(rcvAddr) ) != 0
> ) + {
> + msg_Err( p_access, "Failed to bind UDP socket error: %s",
> vlc_strerror(errno) ); + goto error;
> + }
> +
> + sys->sQuery = vlc_socket( AF_INET, SOCK_DGRAM, IPPROTO_UDP, true );
> + if( sys->sQuery == -1 )
> + {
> + msg_Err( p_access, "Failed to create query socket" );
> + goto error;
> + }
> +
> + /* bind socket to local address */
> + sys->stLocalAddr.sin_family = AF_INET;
> + sys->stLocalAddr.sin_port = htons( 0 );
> + sys->stLocalAddr.sin_addr.s_addr = INADDR_ANY;
> +
> + if( bind(sys->sQuery, (struct sockaddr *)&sys->stLocalAddr,
> sizeof(struct sockaddr) ) != 0 ) + {
> + msg_Err( p_access, "Failed to bind query socket" );
> + goto error;
> + }
> +
> + sys->stSvrAddr.sin_family = AF_INET;
> + sys->stSvrAddr.sin_port = htons( 9124 );
> + res = inet_pton( AF_INET, LOCAL_LOOPBACK, &sys->stSvrAddr.sin_addr );
> + if( res != 1 )
> + {
> + msg_Err( p_access, "Could not convert loopback address" );
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + if( sys->sAMT != -1 )
> + {
> + net_Close( sys->sAMT );
> + sys->sAMT = -1;
> + }
> +
> + if( sys->sQuery != -1 )
> + {
> + net_Close( sys->sQuery );
> + sys->sQuery = -1;
> + }
> + return -1;
> +}
> +
> +/**
> + * Send a relay discovery message, before 3-way handshake
> + * */
> +static void amt_send_relay_discovery_msg( stream_t *p_access, char
> *relay_ip ) +{
> + char chaSendBuffer[AMT_DISCO_MSG_LEN];
> + unsigned int ulNonce;
> + int nRet;
> + access_sys_t *sys = p_access->p_sys;
> +
> + /* initialize variables */
> + memset( chaSendBuffer, 0, sizeof(chaSendBuffer) );
> + ulNonce = 0;
> + nRet = 0;
> +
> + /*
> + * create AMT discovery message format
> + * +---------------------------------------------------+
> + * | Msg Type(1Byte)| Reserved (3 byte)| nonce (4byte) |
> + * +---------------------------------------------------+
> + */
> +
> + chaSendBuffer[0] = AMT_RELAY_DISCO;
> + chaSendBuffer[1] = 0;
> + chaSendBuffer[2] = 0;
> + chaSendBuffer[3] = 0;
> +
> + /* create nonce and copy into send buffer */
> + srand( (unsigned int)time(NULL) );
> + ulNonce = htonl( rand() );
> + memcpy( &chaSendBuffer[4], &ulNonce, sizeof(ulNonce) );
> + sys->glob_ulNonce = ulNonce;
> +
> + /* send it */
> + nRet = sendto( sys->sAMT, chaSendBuffer, sizeof(chaSendBuffer), 0,\
> + (struct sockaddr *)&sys->relayDiscoAddr, sizeof(struct
> sockaddr) ); +
> + if( nRet < 0)
> + msg_Err( p_access, "Sendto failed to %s with error %d.", relay_ip,
> errno); +}
> +
> +/**
> + * Send relay request message, stage 2 of handshake
> + * */
> +static void amt_send_relay_request( stream_t *p_access, char *relay_ip )
> +{
> + char chaSendBuffer[AMT_REQUEST_MSG_LEN];
> + uint32_t ulNonce;
> + int nRet;
> + access_sys_t *sys = p_access->p_sys;
> +
> + memset( chaSendBuffer, 0, sizeof(chaSendBuffer) );
> +
> + ulNonce = 0;
> + nRet = 0;
> +
> + /*
> + * create AMT request message format
> + * +-----------------------------------------------------------------+
> + * | Msg Type(1Byte)| Reserved(1byte)|P flag(1byte)|Reserved (2 byte)|
> + * +-----------------------------------------------------------------+
> + * | nonce (4byte) |
> + * +-----------------------------------------------------------------+
> + *
> + * The P flag is set to indicate which group membership protocol the
> + * gateway wishes the relay to use in the Membership Query response:
> +
> + * Value Meaning
> +
> + * 0 The relay MUST respond with a Membership Query message that
> + * contains an IPv4 packet carrying an IGMPv3 General Query
> + * message.
> + * 1 The relay MUST respond with a Membership Query message that
> + * contains an IPv6 packet carrying an MLDv2 General Query
> + * message.
> + *
> + */
> +
> + chaSendBuffer[0] = AMT_REQUEST;
> + chaSendBuffer[1] = 0;
> + chaSendBuffer[2] = 0;
> + chaSendBuffer[3] = 0;
> +
> + ulNonce = sys->glob_ulNonce;
> + memcpy( &chaSendBuffer[4], &ulNonce, sizeof(uint32_t) );
> +
> + nRet = send( sys->sAMT, chaSendBuffer, sizeof(chaSendBuffer), 0 );
> +
> + if( nRet < 0 )
> + msg_Err(p_access, "Error sending relay request to %s error: %s",
> relay_ip, vlc_strerror(errno) ); +}
> +
> +/*
> +* create AMT request message format
> +*
> +--------------------------------------------------------------------------
> --------+ +* | Msg Type(1 byte)| Reserved (1 byte)| MAC (6 byte)| nonce (4
> byte) | IGMP packet | +*
> +--------------------------------------------------------------------------
> --------+ +*/
> +static void amt_send_mem_update( stream_t *p_access, char *relay_ip, bool
> leave) +{
> + int sendBufSize = IP_HDR_IGMP_LEN + MAC_LEN + NONCE_LEN +
> AMT_HDR_LEN; + char pSendBuffer[ sendBufSize + IGMP_REPORT_LEN
> ];
> + uint32_t ulNonce = 0;
> + access_sys_t *sys = p_access->p_sys;
> +
> + memset( pSendBuffer, 0, sizeof(pSendBuffer) );
> +
> + pSendBuffer[0] = AMT_MEM_UPD;
> +
> + /* copy relay MAC response */
> + memcpy( &pSendBuffer[2], sys->relay_mem_query_msg.uchaMAC, MAC_LEN );
> +
> + /* copy nonce */
> + ulNonce = ntohl(sys->glob_ulNonce);
> + memcpy( &pSendBuffer[8], &ulNonce, NONCE_LEN );
> +
> + /* make IP header for IGMP packet */
> + amt_ip_alert_t p_ipHead;
> + memset( &p_ipHead, 0, IP_HDR_IGMP_LEN );
> + make_ip_header( &p_ipHead );
> +
> + struct sockaddr_in temp;
> + int res = inet_pton( AF_INET, MCAST_ALLHOSTS, &(temp.sin_addr) );
> + if( res != 1 )
> + {
> + msg_Err(p_access, "Could not convert all hosts multicast address:
> %s", gai_strerror(errno) ); + return;
> + }
> + p_ipHead.destAddr = temp.sin_addr.s_addr;
> + p_ipHead.check = get_checksum( (unsigned short*)&p_ipHead,
> IP_HDR_IGMP_LEN ); +
> + amt_igmpv3_groupRecord_t groupRcd;
> + groupRcd.auxDatalen = 0;
> + groupRcd.ssm = sys->mcastGroupAddr.sin_addr.s_addr;
> +
> + if( sys->mcastSrcAddr.sin_addr.s_addr )
> + {
> + groupRcd.type = leave ? AMT_IGMP_BLOCK:AMT_IGMP_INCLUDE;
> + groupRcd.nSrc = htons(1);
> + groupRcd.srcIP[0] = sys->mcastSrcAddr.sin_addr.s_addr;
> +
> + } else {
> + groupRcd.type = leave ?
> AMT_IGMP_INCLUDE_CHANGE:AMT_IGMP_EXCLUDE_CHANGE; + groupRcd.nSrc =
> htons(0);
> + }
> +
> + /* make IGMP membership report */
> + amt_igmpv3_membership_report_t p_igmpMemRep;
> + make_report( &p_igmpMemRep );
> +
> + memcpy(&p_igmpMemRep.grp[0], &groupRcd, (int)sizeof(groupRcd) );
> + p_igmpMemRep.checksum = get_checksum( (unsigned short*)&p_igmpMemRep,
> IGMP_REPORT_LEN ); +
> + amt_membership_update_msg_t memUpdateMsg;
> + memset(&memUpdateMsg, 0, sizeof(memUpdateMsg));
> + memcpy(&memUpdateMsg.ipHead, &p_ipHead, sizeof(p_ipHead) );
> + memcpy(&memUpdateMsg.memReport, &p_igmpMemRep, sizeof(p_igmpMemRep) );
> +
> + memcpy( &pSendBuffer[12], &memUpdateMsg, sizeof(memUpdateMsg) );
> +
> + send( sys->sAMT, pSendBuffer, sizeof(pSendBuffer), 0 );
> +
> + msg_Dbg( p_access, "AMT relay membership report sent to %s", relay_ip
> ); +}
> +
> +/**
> + * Receive relay advertisement message
> + *
> + *
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | V=0 |Type=2 | Reserved |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | Discovery Nonce |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * | |
> + * ~ Relay Address (IPv4 or IPv6) ~
> + * | |
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + * */
> +static bool amt_rcv_relay_adv( stream_t *p_access )
> +{
> + char pkt[RELAY_ADV_MSG_LEN];
> + access_sys_t *sys = p_access->p_sys;
> +
> + memset( pkt, 0, RELAY_ADV_MSG_LEN );
> +
> + struct pollfd ufd[1];
> +
> + ufd[0].fd = sys->sAMT;
> + ufd[0].events = POLLIN;
> +
> + switch( vlc_poll_i11e(ufd, 1, sys->timeout) )
> + {
> + case 0:
> + msg_Err(p_access, "AMT relay advertisement receive time-out");
> + /* fall through */
> + case -1:
> + return false;
> + }
> +
> + struct sockaddr temp;
> + uint32_t temp_size = sizeof( struct sockaddr );
> + ssize_t len = recvfrom( sys->sAMT, &pkt, RELAY_ADV_MSG_LEN, 0, &temp,
> &temp_size ); +
> + if (len < 0)
> + {
> + msg_Err(p_access, "Received message length less than zero");
> + return false;
> + }
> +
> + memcpy( &sys->relay_adv_msg.type, &pkt[0], MSG_TYPE_LEN );
> + if( sys->relay_adv_msg.type != AMT_RELAY_ADV )
> + {
> + msg_Err( p_access, "Received message not an AMT relay
> advertisement, ignoring. "); + return false;
> + }
> +
> + memcpy( &sys->relay_adv_msg.ulRcvNonce, &pkt[NONCE_LEN], NONCE_LEN );
> + if( sys->glob_ulNonce != sys->relay_adv_msg.ulRcvNonce )
> + {
> + msg_Err( p_access, "Discovery nonces differ! currNonce:%x rcvd%x",
> sys->glob_ulNonce, ntohl(sys->relay_adv_msg.ulRcvNonce) ); + return
> false;
> + }
> +
> + memcpy( &sys->relay_adv_msg.ipAddr, &pkt[8], 4 );
> +
> + memset( &sys->relayAddr, 0, sizeof(sys->relayAddr) );
> + sys->relayAddr.sin_family = AF_INET;
> + sys->relayAddr.sin_addr.s_addr = sys->relay_adv_msg.ipAddr;
> + sys->relayAddr.sin_port = htons( AMT_PORT );
> +
> + int nRet = connect( sys->sAMT, (struct sockaddr *)&sys->relayAddr,
> sizeof(sys->relayAddr) );
> + if( nRet < 0 )
> + {
> + msg_Err( p_access, "Error connecting AMT UDP socket: %s",
> vlc_strerror(errno) ); + return false;
> + }
> +
> + return true;
> +}
> +
> +/**
> + * Receive relay membership query message
> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + | V=0 |Type=4 | Reserved |L|G| Response MAC |
> + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +
> + | |
> + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + | Request Nonce |
> + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + | |
> + | Encapsulated General Query Message |
> + ~ IPv4:IGMPv3(Membership Query) ~
> + | IPv6:MLDv2(Listener Query) |
> + | |
> + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + | Gateway Port Number | |
> + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +
> + | |
> + + +
> + | Gateway IP Address (IPv4 or IPv6) |
> + + +
> + | |
> + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + | |
> + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> + */
> +static bool amt_rcv_relay_mem_query( stream_t *p_access )
> +{
> + char pkt[RELAY_QUERY_MSG_LEN];
> + memset( pkt, 0, RELAY_QUERY_MSG_LEN );
> + struct pollfd ufd[1];
> + access_sys_t *sys = p_access->p_sys;
> +
> + ufd[0].fd = sys->sAMT;
> + ufd[0].events = POLLIN;
> +
> + switch( vlc_poll_i11e(ufd, 1, sys->timeout) )
> + {
> + case 0:
> + msg_Err(p_access, "AMT relay membership query receive
> time-out"); + /* fall through */
> + case -1:
> + return false;
> + }
> +
> + ssize_t len = recv( sys->sAMT, &pkt, RELAY_QUERY_MSG_LEN, 0 );
> +
> + if (len < 0)
> + {
> + msg_Err(p_access, "length less than zero");
> + return false;
> + }
> +
> + memcpy( &sys->relay_mem_query_msg.type, &pkt[0], MSG_TYPE_LEN );
Potentially undefined read. Ditto below.
> + /* pkt[1] is reserved */
> + memcpy( &sys->relay_mem_query_msg.uchaMAC[0], &pkt[AMT_HDR_LEN],
> MAC_LEN ); + memcpy( &sys->relay_mem_query_msg.ulRcvedNonce,
> &pkt[AMT_HDR_LEN + MAC_LEN], NONCE_LEN )
> + if(
> sys->relay_mem_query_msg.ulRcvedNonce != sys->glob_ulNonce )
> + {
> + msg_Warn( p_access, "Nonces are different rcvd: %x glob: %x",
> sys->relay_mem_query_msg.ulRcvedNonce, sys->glob_ulNonce );
> + return
> false;
> + }
> +
> + size_t shift = AMT_HDR_LEN + MAC_LEN + NONCE_LEN;
> + memcpy( &sys->relay_ip_hdr, &pkt[shift], IP_HDR_IGMP_LEN );
> +
> + shift += IP_HDR_IGMP_LEN;
> + sys->relay_igmp_query.type = pkt[shift];
> + shift++; assert( shift < RELAY_QUERY_MSG_LEN);
> + sys->relay_igmp_query.max_resp_code = pkt[shift];
> + shift++; assert( shift < RELAY_QUERY_MSG_LEN);
> + memcpy( &sys->relay_igmp_query.checksum, &pkt[shift], 2 );
> + shift += 2; assert( shift < RELAY_QUERY_MSG_LEN);
> + memcpy( &sys->relay_igmp_query.ssmIP, &pkt[shift], 4 );
> + shift += 4; assert( shift < RELAY_QUERY_MSG_LEN);
> + sys->relay_igmp_query.s_qrv = pkt[shift];
> + shift++; assert( shift < RELAY_QUERY_MSG_LEN);
> + if( pkt[shift] == 0 )
> + sys->relay_igmp_query.qqic = 125;
> + else
> + sys->relay_igmp_query.qqic = pkt[shift];
> +
> + shift++; assert( shift < RELAY_QUERY_MSG_LEN);
> + memcpy( &sys->relay_igmp_query.nSrc, &pkt[shift], 2 );
> + /* if a membership thread exists cancel it */
> + if( sys->threadReady )
> + {
> + msg_Dbg( p_access, "Canceling existing AMT relay membership update
> thread"); +
> + sys->threadReady = false;
> + vlc_cancel( sys->updateThread );
> + vlc_join( sys->updateThread, NULL );
> + }
> +
> + msg_Dbg( p_access, "Spawning AMT relay membership update thread");
> +
> + if( vlc_clone( &sys->updateThread, amt_mem_upd, p_access,
> VLC_THREAD_PRIORITY_LOW) ) + {
> + msg_Err( p_access, "Could not create AMT relay membership update
> thread" ); + return false;
> + }
> +
> + /* set theadReady to true, thread will send periodic membership updates
> until false */ + sys->threadReady = true;
> + return true;
> +}
> +
> +/**
> + * Join SSM group based on input addresses, or use the defaults
> + * */
> +static int amt_joinSSM_group( stream_t *p_access )
> +{
> + struct ip_mreq_source imr;
> + access_sys_t *sys = p_access->p_sys;
> +
> + imr.imr_multiaddr.s_addr = sys->mcastGroupAddr.sin_addr.s_addr;
> + imr.imr_sourceaddr.s_addr = sys->mcastSrcAddr.sin_addr.s_addr;
> + imr.imr_interface.s_addr = INADDR_ANY;
> +
> + return setsockopt( sys->sAMT, IPPROTO_IP, IP_ADD_SOURCE_MEMBERSHIP,
> (char *)&imr, sizeof(imr) ); +}
> +
> +static int amt_joinASM_group( stream_t *p_access )
> +{
> + struct ip_mreq imr;
> + access_sys_t *sys = p_access->p_sys;
> +
> + imr.imr_multiaddr.s_addr = sys->mcastGroupAddr.sin_addr.s_addr;
> + imr.imr_interface.s_addr = INADDR_ANY;
> +
> + return setsockopt( sys->sAMT, IPPROTO_IP, IP_ADD_MEMBERSHIP, (char
> *)&imr, sizeof(imr) ); +}
> +
> +/**
> + * Leave SSM group that was joined earlier.
> + * */
> +static int amt_leaveSSM_group( stream_t *p_access )
> +{
> + struct ip_mreq_source imr;
> + access_sys_t *sys = p_access->p_sys;
> +
> + imr.imr_multiaddr.s_addr = sys->mcastGroupAddr.sin_addr.s_addr;
> + imr.imr_sourceaddr.s_addr = sys->mcastSrcAddr.sin_addr.s_addr;
> + imr.imr_interface.s_addr = INADDR_ANY;
> +
> + return setsockopt( sys->sAMT, IPPROTO_IP, IP_DROP_SOURCE_MEMBERSHIP,
> (char *)&imr, sizeof(imr) ); +}
> +
> +/**
> + * Leave ASM group that was joined earlier.
> + * */
> +static int amt_leaveASM_group( stream_t *p_access )
> +{
> + struct ip_mreq imr;
> + access_sys_t *sys = p_access->p_sys;
> +
> + imr.imr_multiaddr.s_addr = sys->mcastGroupAddr.sin_addr.s_addr;
> + imr.imr_interface.s_addr = INADDR_ANY;
> +
> + return setsockopt( sys->sAMT, IPPROTO_IP, IP_DROP_MEMBERSHIP, (char
> *)&imr, sizeof(imr) ); +}
> +
> +/* A thread is spawned since IGMP membership updates need to issued
> periodically in order to continue to receive multicast */ +/* Simple timers
> are not suitable for this requirement since the parent is otherwise
> occupied in receiving UDP packet flow */
That looks like complete nonsense.
> +static void *amt_mem_upd( void
> *data )
> +{
> + stream_t *p_access = (stream_t*) data;
> + access_sys_t *sys = p_access->p_sys;
> +
> + msg_Dbg( p_access, "AMT relay membership update thread started" );
> +
> + /* thread sends periodic AMT membership updates until Close() which
> terminates thread */ + while ( true )
> + {
> + amt_send_mem_update( p_access, sys->relayDisco, false );
> + vlc_tick_sleep( (vlc_tick_t)sys->relay_igmp_query.qqic * CLOCK_FREQ
> ); + }
> +
> + return NULL;
> +}
--
Rémi Denis-Courmont
http://www.remlab.net/
More information about the vlc-devel
mailing list