[vlc] DVB-T in Cologne/Germany

[Guido Flohr]

Hi,

I'm trying to stream DVB-T.  Using dvbstream with xine works like a charm

	dvbstream -bw 8 -gi 4 -qam 16 -f 650000 337 338 \
-o - | xine stdin:/

but I am not able to "translate" the dvbstream calling syntax to vlc syntax.

The data for RTL Television in Cologne is for instance: channel 43 (650 
MHz), modulation 16-QAM, error protection 2/3, guard interval 1/4, PID 337.

The corresponding output of dvbstream is:

   guido at thecomputer:~> dvbstream -bw 8 -gi 4 -qam 16 -f 650000 -v 337 \
     -a 338 -o - >/dev/null
   dvbstream v0.4pre3 - (C) Dave Chapman 2001
   Released under the GPL.
   Latest version available from http://www.linuxstb.org/
   Using DVB card "DST TERR"
   tuning DVB-T (in United Kingdom) to 650000000 Hz
   polling....
   Getting frontend event
   FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI 
FE_HAS_SYNC
   Event:  Frequency: 10602539
           SymbolRate: 0
           FEC_inner:  2

   Bit error rate: 0
   Signal strength: 10496
   SNR: 20224
   FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI 
FE_HAS_SYNC
   Output to stdout
   Streaming 2 streams
   Caught signal 2 - closing cleanly.

How can I achieve the same with vlc?

Thanks for your help!

Guido

-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>