[vlc] KNC-1 Astra 19.2 tuning problem

Zoilo Gomez zoilo at xs4all.nl
Thu Oct 18 20:57:27 CEST 2007


What a difference Christophe !! All channels are now working great, 
thank you!

But how is it possible that many channels were working fine, even with 
wrong symbol rate settings? This is what sent me into the wrong 
direction, believing that it had something to do with my disk set-up.

Z.


Christophe Massiot wrote:
> On Wed, Oct 17, 2007, Zoilo Gomez wrote:
>   
>> I have a very strange problem ...
>>
>> Using vlc (0.8.6c) with a KNC1 TV-Star DVB-S card on Astra1 (19E2) , I 
>> cannot lock to any channels in the lower band (below 11.700 GHz), and 
>> also not to any channel above 12.500 GHz (approximately). All 
>> transponders in between are fine. Also all transponders on Hotbird, 
>> Astra2 and Astra3 are without problem. Only the lower band, and the 
>> upper half of the upper band on Astra1 are giving me problems.
>>
>> However szap has no problem to lock to any of these channels on Astra 1 !
>>
>> Even more strange: whenever I use szap to lock to the channel, then quit 
>> and quickly (within a few seconds) start vlc on the same channel, then 
>> it works fine !
>>
>> Does anyone have an idea what could possibly be causing this ?? Why is 
>> vlc having locking problems, where szap does not?
>>     
>
> Are you supplying VLC with the correct symbol rate
> (--dvb-srate=22000000) ?
>   




More information about the vlc mailing list