[dvblast-devel] Streaming dvb-c with CI modules

[Kompan Kolia]

I am use dvblast with DVB-S/S2 card ...
If acces card properly activated, dvblast decoded stream automaticaly.
In dvblast conf file you choose only multicast group and other parametrs.

DVBLAST don`t have special swith decode/no decode .

You can see some strings in output of dvblast, like this:
debug: CI slot 0 is active
debug: opening ResourceManager session (1)
debug: opening ApplicationInformation session (2)
info: CAM: DREcrypt NP4+ , 01, 4A60, 0001
debug: opening ConditionalAccess session (3)
debug: CA system IDs supported by the application :
debug: - 0x4ae0
debug: - 0x4ae1
debug: - 0x4ae5
debug: adding first CAPMT for SID 31020 on session 3


If you see it, than you CI module is activated.
DVBlast streams this stream in you network.



14.12.2011, 11:12, "Tran Hai Anh" <haianhtran1986 at gmail.com>:
> Anyone can help me?
>
> In my streaming project, all I have now are:
>         - NetUP Dual DVB-T-C-CI card.
>         - Linux server with Kernel 3.0.0-netup and drivers already
> (adapter0, ca0, demux0, frontend0/1, ...)
>         - DVB-C source with some channels are free, and some channels are
> encrypted.
>         - The free channels are tuned out succesfully with dvblast command:
>         Dvblast -a 0 -n 1 -f 802000000 -s 6956000 -m qam_64 -u -c
> channels.conf
>         In the config file "channels.conf", I have:
>                 :channel 1 - Free
>                 239.10.1.1:5500/udp 1 201
>                 :channel 2 - Encrypted
>                 239.10.1.2:5500/udp 1 202
>
> My question is: with encrypted channels, how can I configure the CA modules
> to decrypt these channels in "channels.conf" file?
> Any one ever worked same project? Please suggest me some idea.
>
> Thanks very much!
>
> -----Original Message-----
> From: Tran Hai Anh [mailto:haianhtran1986 at gmail.com]
> Sent: Tuesday, December 13, 2011 9:10 AM
> To: 'Mailing list for DVBlast developers'
> Subject: RE: [dvblast-devel] Streaming dvb-c with CI modules
>
> Dear,
>
> I'm using NetUP Dual DVB-T-C-CI card and drivers provided by NetUP. Please
> reference at this page: http://www.netup.tv/en-EN/dual_dvb-t-c-ci_card.php
> I'm also using dvblast for streaming output.
>
> Thanks!
>
> -----Original Message-----
> From: dvblast-devel-bounces at videolan.org
> [mailto:dvblast-devel-bounces at videolan.org] On Behalf Of Georgi
> Chorbadzhiyski
> Sent: Monday, December 12, 2011 5:24 PM
> To: Mailing list for DVBlast developers
> Subject: Re: [dvblast-devel] Streaming dvb-c with CI modules
>
> Around 12/12/2011 10:58 AM, Tran Hai Anh scribbled:
>
>>  Could you please show me the way to work with CI modules? Which
>
> applications
>
>>  or commands do I need? Please let me know your experiences in this issues.
>
> What is the model of the card and what driver are you using?
>
> --
> Georgi Chorbadzhiyski
> http://georgi.unixsol.org/
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel