[dvblast-devel] tsdecrypt

[JULIAN GARDNER]

nope on the incoming ip stream from dvblast

the ECM pid seems missing, tsdecrypt shows ecm pid as 0x0000

joolz




>________________________________
> From: Georgi Chorbadzhiyski <gf at unixsol.org>
>To: JULIAN GARDNER <joolzg at btinternet.com>; Mailing list for DVBlast developers <dvblast-devel at videolan.org> 
>Sent: Tuesday, 24 January 2012, 13:37
>Subject: Re: [dvblast-devel] tsdecrypt
> 
>Around 01/24/2012 02:33 PM, JULIAN GARDNER scribbled:
>> Anybody managed top get this working with dvblast, seems we are not sending all the pids that are needed.
>> 
>> im playing with a boxer card, caid 0500, and i see the 2 pids from the CAT being added to the stream,. but the ones in the PMT are not being added.
>> 
>> Ive tried /emm/ecm and -Y -W but still missing pids
>
>Well, I have got it working :) you are missing pids where? If you are looking
>at the output, the default for tsdecrypt is to filter the output. See these
>options in the man page:
>
>-p, --output-filter
>    Enable output filtering. When output filter is enabled only PAT/PMT/SDT and
>data packets are left in the output. Everything else not mentioned in PMT like
>NIT, EIT, TDT tables and unknown pids is removed.
>
>-y, --output-nit-pass
>    Pass throught NIT packets when output filtering is enabled.
>
>-w, --output-eit-pass
>    Pass throught EIT (EPG) packets when output filtering is enabled.
>
>-x, --output-tdt-pass
>    Pass throught TDT/TOT packets when output filtering is enabled.
>
>
>-- 
>Georgi Chorbadzhiyski
>http://georgi.unixsol.org/
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20120124/1098cb11/attachment-0001.html>