[dvblast-devel] tsdecrypt

[Doychin Dokov]

The problem is the output from dvblast, not the one for tsdecrypt. It does
not output the CA descriptors when -Y is used, which in turn makes
tsdecrypt unable to find out the ECM PID. That makes first time users
frustrated, because it's not working as expected.


2012/1/24 Georgi Chorbadzhiyski <gf at unixsol.org>

> Around 01/24/2012 02:33 PM, JULIAN GARDNER scribbled:
> > Anybody managed top get this working with dvblast, seems we are not
> sending all the pids that are needed.
> >
> > im playing with a boxer card, caid 0500, and i see the 2 pids from the
> CAT being added to the stream,. but the ones in the PMT are not being added.
> >
> > Ive tried /emm/ecm and -Y -W but still missing pids
>
> Well, I have got it working :) you are missing pids where? If you are
> looking
> at the output, the default for tsdecrypt is to filter the output. See these
> options in the man page:
>
> -p, --output-filter
>    Enable output filtering. When output filter is enabled only PAT/PMT/SDT
> and
> data packets are left in the output. Everything else not mentioned in PMT
> like
> NIT, EIT, TDT tables and unknown pids is removed.
>
> -y, --output-nit-pass
>    Pass throught NIT packets when output filtering is enabled.
>
> -w, --output-eit-pass
>    Pass throught EIT (EPG) packets when output filtering is enabled.
>
> -x, --output-tdt-pass
>    Pass throught TDT/TOT packets when output filtering is enabled.
>
>
> --
> Georgi Chorbadzhiyski
> http://georgi.unixsol.org/
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20120124/346cdbff/attachment.html>