[dvblast-devel] tsdecrypt

[Doychin Dokov]

Try also -C -Y, though I think -Y implies -C.

The "ENABLE" part of the config is actually "ALWAYS ON". If 1, this makes
dvblast restart the CI module (if present) if the service fails to decrypt.


2012/1/24 JULIAN GARDNER <joolzg at btinternet.com>

> OK tried and nothing, i always thought the format of the conf file was
>
> ip ENABLE sid
>
> I have tried your idea and again no decode, tsdecrypt does not show any
> ecm/emm coming in
>
> joolz
>
>   ------------------------------
> *From:* Doychin Dokov <dokov at silistra.tv>
> *To:* JULIAN GARDNER <joolzg at btinternet.com>; Mailing list for DVBlast
> developers <dvblast-devel at videolan.org>
> *Sent:* Tuesday, 24 January 2012, 14:53
> *Subject:* Re: [dvblast-devel] tsdecrypt
>
> You don't need -M 930 in your tsdecrypt command line as well, since you
> are feeding a single service to it.
>
> 2012/1/24 JULIAN GARDNER <joolzg at btinternet.com>
>
> just did a pull for your changes
>
> dvb.conf contains
> 224.10.0.3:1234/udp 1 930
>
> Test cases
> dvblast -f x -s y -c dvb.conf                 NOT WORKING
> dvblast -f x ls y -c dvb.conf -Y            NOT WORKING
> dvblast -f x ls y -c dvb.conf -Y -W      NOT WORKING
> dvblast -f x ls y -c dvb.conf -W           NOT WORKING
>
>   All the above cases dont seem to add int the CA pids from the PMT
> 224.10.0.3:1234/udp 1 930 1,49,55,80,92,130,938,939
>
> if i add these missing pids, even the audio video pids, to the dvb.conf
> file it works, no -Y or  -W needed.
>
> am i doing something wrong? i have -M 930 in my tsdecrypt command line as
> well
>
>
> joolz
>
>
>
>
>   ------------------------------
> *From:* Georgi Chorbadzhiyski <gf at unixsol.org>
> *To:* Mailing list for DVBlast developers <dvblast-devel at videolan.org>
> *Cc:* JULIAN GARDNER <joolzg at btinternet.com>
> *Sent:* Tuesday, 24 January 2012, 14:33
> *Subject:* Re: [dvblast-devel] tsdecrypt
>
> Around 01/24/2012 03:18 PM, Georgi Chorbadzhiyski scribbled:
> > Around 01/24/2012 03:16 PM, JULIAN GARDNER scribbled:
> >> with -Y -W no change
> >
> > If you remove the whole line:
> >
> > if ( b_enable_ecm && i_tag == 0x9 ) continue;
> >
> > does it work?
>
> Ok, I think you were not applying the test patch. Without the patch
> CA descriptors were missing, with the patch CA descriptors are in PMT.
> I pushed the commit to dvblast repo so you can update it.
>
> I have tested using:
>
> ./dvblast \
>     --ecm-passthrough \
>     --emm-passthrough \
>     --epg-passthrough \
>     --udp \
>     --rtp-input 239.78.78.1:5000/udp \
>     --config-file dvblast.conf
>
> in dvblast.conf I have one service only:
>
> 239.78.78.2:5000/udp    1  1815
>
> this service is encrypted, and with the patch CA descriptors in PMT
> are there so tsdecrypt works.
>
> --
> Georgi Chorbadzhiyski
> http://georgi.unixsol.org/
>
>
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20120124/8033838f/attachment-0001.html>