[dvblast-devel] tsdecrypt

[JULIAN GARDNER]

tried and no difference, if i look at the output of dvblast "-x text" i see the pmt decoded and the 3 pids needed for each audio/video, but these are not added into the system, the CAT pids are only added when the -W command is on the command like

joolz


>________________________________
> From: Doychin Dokov <dokov at silistra.tv>
>To: Mailing list for DVBlast developers <dvblast-devel at videolan.org> 
>Sent: Tuesday, 24 January 2012, 15:01
>Subject: [dvblast-devel]  tsdecrypt
> 
>
>
>Try also -C -Y, though I think -Y implies -C.
>
>
>The "ENABLE" part of the config is actually "ALWAYS ON". If 1, this makes dvblast restart the CI module (if present) if the service fails to decrypt.
>
>
>
>
>2012/1/24 JULIAN GARDNER <joolzg at btinternet.com>
>
>OK tried and nothing, i always thought the format of the conf file was
>>
>>
>>ip ENABLE sid
>>
>>
>>
>>I have tried your idea and again no decode, tsdecrypt does not show any ecm/emm coming in
>>
>>
>>
>>joolz
>>
>>
>>
>>>________________________________
>>> From: Doychin Dokov <dokov at silistra.tv>
>>>To: JULIAN GARDNER <joolzg at btinternet.com>; Mailing list for DVBlast developers <dvblast-devel at videolan.org> 
>>>Sent: Tuesday, 24 January 2012, 14:53
>>>Subject: Re: [dvblast-devel] tsdecrypt
>>> 
>>>
>>>
>>>You don't need -M 930 in your tsdecrypt command line as well, since you are feeding a single service to it.
>>>
>>>
>>>2012/1/24 JULIAN GARDNER <joolzg at btinternet.com>
>>>
>>>just did a pull for your changes
>>>>
>>>>
>>>>dvb.conf contains
>>>>224.10.0.3:1234/udp 1 930
>>>>
>>>>
>>>>
>>>>Test cases
>>>>dvblast -f x -s y -c dvb.conf                 NOT WORKINGdvblast -f x ls y -c dvb.conf -Y            NOT WORKING 
>>>>dvblast -f x ls y -c dvb.conf -Y -W      NOT WORKING
>>>>dvblast -f x ls y -c dvb.conf -W           NOT WORKING
>>>>
>>>> All the above cases dont seem to add int the CA pids from the PMT
>>>>
>>>>224.10.0.3:1234/udp 1 930 1,49,55,80,92,130,938,939
>>>>
>>>>if i add these missing pids, even the audio video pids, to the dvb.conf file it works, no -Y or  -W needed.
>>>>
>>>>am i doing something wrong? i have -M 930 in my tsdecrypt command line as well
>>>>
>>>>
>>>>joolz
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>________________________________
>>>>> From: Georgi Chorbadzhiyski <gf at unixsol.org>
>>>>>To: Mailing list for DVBlast developers <dvblast-devel at videolan.org> 
>>>>>Cc: JULIAN GARDNER <joolzg at btinternet.com> 
>>>>>Sent: Tuesday, 24 January 2012, 14:33
>>>>>Subject: Re: [dvblast-devel] tsdecrypt
>>>>> 
>>>>>Around 01/24/2012 03:18 PM, Georgi Chorbadzhiyski scribbled:
>>>>>> Around 01/24/2012 03:16 PM, JULIAN GARDNER scribbled:
>>>>>>> with -Y -W no change
>>>>>> 
>>>>>> If you remove the whole line:
>>>>>> 
>>>>>> if ( b_enable_ecm && i_tag == 0x9 ) continue;
>>>>>> 
>>>>>> does it work?
>>>>>
>>>>>Ok, I think you were not applying the test patch. Without the patch
>>>>>CA descriptors were missing, with the patch CA descriptors are in PMT.
>>>>>I pushed the commit to dvblast repo so you can update it.
>>>>>
>>>>>I have tested using:
>>>>>
>>>>>./dvblast \
>>>>>    --ecm-passthrough \
>>>>>    --emm-passthrough \
>>>>>    --epg-passthrough \
>>>>>    --udp \
>>>>>    --rtp-input 239.78.78.1:5000/udp \
>>>>>    --config-file
 dvblast.conf
>>>>>
>>>>>in dvblast.conf I have one service only:
>>>>>
>>>>>239.78.78.2:5000/udp    1   1815
>>>>>
>>>>>this service is encrypted, and with the patch CA descriptors in PMT
>>>>>are there so tsdecrypt works.
>>>>>
>>>>>-- 
>>>>>Georgi Chorbadzhiyski
>>>>>http://georgi.unixsol.org/
>>>>>
>>>>>
>>>>>
>>>>_______________________________________________
>>>>dvblast-devel mailing list
>>>>dvblast-devel at videolan.org
>>>>http://mailman.videolan.org/listinfo/dvblast-devel
>>>>
>>>>
>>>
>>>
>>>
>
>
>_______________________________________________
>dvblast-devel mailing list
>dvblast-devel at videolan.org
>http://mailman.videolan.org/listinfo/dvblast-devel
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20120124/8836fed9/attachment.html>