[dvblast-devel] A little question about 3.0E

[Doychin Dokov]

You can manually select the PIDs wanted by adding them to the config file
at the end of the line, like

239.1.2.3:3001   1   500   501,502



2014-10-09 4:37 GMT+03:00 JULIAN GARDNER <joolzg at btinternet.com>:

>
>
>
>
>
>
>
> >________________________________
> > From: JULIAN GARDNER <joolzg at btinternet.com>
> >To: dvblast <dvblast-devel at videolan.org>
> >Sent: Thursday, 9 October 2014, 2:58
> >Subject: [dvblast-devel] A little question about 3.0E
> >
> >
> >
> >I am looking at 12537/13960/V
> >
> >dvb.conf
> ># MEGA
> >224.10.10.10:1234/udp 1 500
> ># SKAI
> >224.10.10.20:1234/udp 1 600
> ># STAR
> >224.10.10.30:1234/udp 1 700
> >
> >Problem is on iftop shows these 3 channel EACH running at over 89Mb/s
> >
> >If i look at 12734/16751
> >
> >dvb.conf
> ># Vouli
> >224.20.10.10:1234/udp 1 30
> >
> >iftop gives 3.1Mb
> >
> >Now the 1st 3 channels when dumped shows 95% of the data is 0x1FFF
> padding pids.
> >
> >Any ideas, or is there a way of removnig all the padding before being
> streamed out
> >
> >joolz
>
>
> I think i found the problem.
>
> If i check the pmt, the ca says this
>
> desc 09 ca casysd=0x2600 pid=8191
>
> So is there a way to disable the CA system and the adding of the pids
>
> joolz
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> https://mailman.videolan.org/listinfo/dvblast-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20141009/a7274875/attachment.html>