[dvblast-devel] A little question about 3.0E

[Georgi Chorbadzhiyski]

On 10/09/2014 09:14 AM, JULIAN GARDNER wrote:
>>> I think i found the problem.
>>> If i check the pmt, the ca says this
>>> desc 09 ca casysd=0x2600 pid=8191
>>> So is there a way to disable the CA system and the adding of the pids
> 
> Thanks for that, but i dont like these manualy systems.
> It turns out that the -Y command is the culprit, so i have changed the dvblast code to not add a 0x1ffff pid when it comes from the ca system.
> solved all the problems,

Could you post the working patch please?

CAID 0x2600 is BISS /no need for a pid/ if I recall correctly and ignoring 0x1fff
pid is not a bad idea.

-- 
Georgi Chorbadzhiyski | http://georgi.unixsol.org/ | http://github.com/gfto/