[dvblast-devel] wishlist

[Nuno Mota]

I always use -S 1-4 and -k 1, as I only have four satellites in a
multiswitch.

I always though -k 2 would provide me access to sat 5 to 8. -k 3 satellite
9 to 12 and so on.




2015-11-09 8:41 GMT+00:00 Dan Lita <dan.lita at b1tv.ro>:

> On 11/9/2015 10:26 AM, Zoran Turalija wrote:
>
>> On Sun, Nov 08, 2015 at 08:35:40PM +0200, Dan Lita wrote:
>>
>>> raw diseqc is when you specify yourself the command string like this one:
>>>
>>> e0 31 6b 0a
>>>
>>> or this one:
>>> e0 10 39 F6
>>>
>>>
>>>
>>> I'm using now:
>>>
>>> scan-s2 -a 1 -X -x 2 -S 6 -o zap 'jtv' > channels.conf -s 1
>>> and immediately then:
>>> dvblast -a 1 -n 0  -c jtv  -f 12694000 -s 3333000  -v 13 -u -U -t 1
>>>
>>> I never managed to do this directly from dvblast since S=6 equivalent in
>>> -k
>>> dvblast cannot be 6 ... (1-4 interval)
>>> I have a 10 port diseqc switch which uses uncommited=6 to switch
>>> correctly.
>>> scan-s2 allows me to send that command.
>>>
>> Regarding uncommitted support >4...
>>
>> You can try this totally untested patch (unfortunately, I cannot check
>> nor test it):
>>
>> diff --git a/dvb.c b/dvb.c
>> index d1c8409..b711670 100644
>> --- a/dvb.c
>> +++ b/dvb.c
>> @@ -548,12 +548,10 @@ static int FrontendDoDiseqc(void)
>>                             | (fe_voltage == SEC_VOLTAGE_13 ? 0 : 2)
>>                             | (fe_tone == SEC_TONE_ON ? 1 : 0);
>>   -        if ( i_uncommitted > 0 && i_uncommitted < 5 )
>> +        if ( i_uncommitted > 0 && i_uncommitted < 17 )
>>           {
>>              uncmd.msg[3] = 0xf0 /* reset bits */
>> -                             | ((i_uncommitted - 1) << 2)
>> -                             | (fe_voltage == SEC_VOLTAGE_13 ? 0 : 2)
>> -                             | (fe_tone == SEC_TONE_ON ? 1 : 0);
>> +                             | (i_uncommitted - 1);
>>              if( ioctl( i_frontend, FE_DISEQC_SEND_MASTER_CMD, &uncmd ) <
>> 0 )
>>              {
>>                  msg_Err( NULL, "ioctl FE_SEND_MASTER_CMD failed (%s)",
>>
>>
>> raw diseqc or better multiple raw diseqc introduction may solve these
>>> problems.
>>>
>> Patch welcome...
>>
>>
>> Thank you,
> I'll try the patch today.
>
> Dan
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> https://mailman.videolan.org/listinfo/dvblast-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20151109/f8bda632/attachment.html>