[streaming] Re: unclas - Reloading VLS config from the Telnet Interface

[Michael Matthews]

I tried to get v4l working with the new vls cvs (last night) and vlc
.6.1. All I get is tv static and no sound on client. I am wondering how
the channel is set and volume/mute on card. If I set mute off using
v4lctl sound from the card comes through speaker however when vls starts
it is turned off. With this capture card you have to worry about sound
from the tuner and sound from the sound card(since sound is routed
through line-in). Anyway, any ideas??
settings to use v4l streamer:
v4lctl setchannel 1
v4lctl volume 65535
v4lctl volume mute off

I don't see equivilent in vls.cfg doc
BEGIN "tuner"
# --- Example:
Device        = "/dev/video0"     # Video4linux device (default is
/dev/video)
Channel       = "0"              # Channel Source: Webcam often 0
Frequency     = "7668"           # Frequency (Mhz) * 16
Norm          = "1"              # PAL=0, NTSC=1, SECAM=2
# Size possibilities: can be either:
  # - empty string : default size
  # - width x height
  # - subQCIF(128x96), QSIF(160x120), QCIF(176x144), SIF(320x240),
  #   CIF(352x288), VGA (640x480)
Size          = "SIF"
DeInterlace   = "0"
Compression   = "mpeg1"         # mpeg1 or mpeg4 [experimental]
Bitrate       = "500"            # Bitrate (approx.) in kbps
Quality       = "11.0"            # 1.0 (good) to 31.0 (bad)
AudioDevice   = "/dev/dsp"       # Sound device (try /dev/dsp<X>
AudioCompression = "mp2"         # mp2, mp3 or ogg
AudioBitrate  = "16"             # Audio bitrate in kbps
AudioFreq     = "16000"          # 16000, 22050, 24000, 32000, 44100,
48000
AudioChannel  = "2"              # 1=mono, 2=stereo
END



-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>