[streaming] Re: Problems with sky2pc

daniela at easyband.com.br daniela at easyband.com.br
Fri Jul 16 01:55:39 CEST 2004


In fact i get no errors! What i still don´t know if it´s right is my dvbrc
file. The only information I got from my company is this:
Transponder Freq: 12139 Mhz
LNB Freq : 10750 Mhz
LOF1: 10750 Mhz
LOF2: 10750 Mhz
LNB Selection: 22 Khz
Switch: 1171 Mhz
Symbol Rate: 7324 K/s
FEC: auto
Step Size: 5
Polaridade: Horizontal
DISEQ: None
Pids: 3c, 64, 65, 66 ,6e, 78, 8z

I really don´t know for example what is the FMAX and FMIN based on this
values I have. And how do i configure this PIDs in the channels.  How do I
configure the FEC as auto?
Is there anywhere where i could find the .dvbrc specification?
I really hope to hear from you soom,

Despite of this, i don´t know what more can be wrong!
Does the dvb drivers creat any interface, like eth1? I just have my
conventional net card, and i don´t know if it´s normal.
Thanks for your answer.
Daniela
>
> Le 7 juil. 04, à 14:42, <daniela at easyband.com.br> a écrit :
>
>>
>> What i think is ok. Then when i type: vls -vv -d udp:192.168.0.10
>> dvb:"CH1" --ttl 12 i got nothing!
>>
>>
>> VideoLAN Server v 0.5.6 (Jun 15 2004) - (c)1999-2003 VideoLAN
>> 2004-07-07 09:10:21 [INFO/Vls]  Module "channel:file" registered
>> 2004-07-07 09:10:21 [INFO/Vls]  Module "channel:network" registered
>> 2004-07-07 09:10:21 [INFO/Vls]  Module "mpegreader:file" registered
>> 2004-07-07 09:10:21 [INFO/Vls]  Module "mpegconverter:ts2ts"
>> registered 2004-07-07 09:10:21 [INFO/Vls]  Module
>> "mpegconverter:ps2ts" registered 2004-07-07 09:10:21 [INFO/Vls]
>> Module "input:local" registered
>> 2004-07-07 09:10:21 [INFO/Vls]  Module "input:video" registered
>> 2004-07-07 09:10:21 [INFO/Vls]  Browsing modules in directory "."
>> 2004-07-07 09:10:22 [INFO/Vls]  Browsing modules in directory
>> "/usr/local/lib/videolan/vls"
>> 2004-07-07 09:10:22 [INFO/Vls]  Module "mpegreader:dvd" registered
>> 2004-07-07 09:10:22 [INFO/Vls]  Module "input:dvb" registered
>> 2004-07-07 09:10:22 [INFO/Vls]  Module "mpegreader:dvb" registered
>> 2004-07-07 09:10:22 [INFO/Vls]  Channel 'output1' created
>> 2004-07-07 09:10:22 [INFO/Vls]  Starting input 'input1'
>> 2004-07-07 09:10:24 [INFO/input1]  DVB-S Card registered without
>> decoder
>>
>> Using default /root/.dvbrc
>>
>> Reading original format . done
>> 2004-07-07 09:10:24 [INFO/input1]  Added program 'CH1'
>> 2004-07-07 09:10:24 [INFO/Vls]  Input 'input1' sucessfully initialised
>> 2004-07-07 09:10:24 [INFO/Vls]  Executing command1 : 'start CH1
>> output1 input1 '
>>
>> The dmesg says:
>> ...
>>
>> Linux video capture interface: v1.00
>> PCI: Enabling device 00:0d.0 (0004 -> 0007)
>> PCI: Found IRQ 11 for device 00:0d.0
>> PCI: Sharing IRQ 11 with 01:00.0
>> skystar2.c: FlexCopIIB(rev.195) chip found
>> skystar2.c: the chip has 38 hardware filters
>> DVB: registering new adapter (Technisat SkyStar2 driver).
>> DVB: registering frontend 0:0 (Zarlink MT312)...
>>
>> I think everything is ok, but...
>> Does anyone have a clue? Thanks in advance,
>> Daniela
>>
>
> Do you get any other message, after that ? (Time out, read error ?).
> Which kernel, which DVB drivers, which libdvb (has to be 0.2.2)
>
> --
> BigBen
>
> --
> This is the streaming mailing-list, see
> http://www.videolan.org/streaming/ To unsubscribe, please read
> http://www.videolan.org/support/lists.html If you are in trouble, please
> contact <postmaster at videolan.org>



-- 
This is the streaming mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>



More information about the streaming mailing list