VlC-0.4.4 and VLS-0.3.3 problems report

Jean-Paul Saman jpsaman at wxs.nl
Sun Aug 25 20:47:29 CEST 2002


Liu, Haining wrote:
> Hi, All,
> 
> First of all, I have carefully read all the posts on both lists, and still can't figure out why I meet these problems. My problems appear on RH7.2-3 linux
> 
> i) Let me explain what happened to VLC at first. I installed most updated libdvdcss, make install as instructed, then I configure vlc-0.4.4.( I tried with 1)default; 2)turn on the "--enable-dvd" ), Then when I tried to use VLC directly read from my DVD drive, it failed, prompt "module error: requested access module 'dvd' unavailable\input error: no suitable access plug-in for 'dvd/:/mnt/cdrom at 1,1" ( I am pretty sure I have enabled my wrting rights to the drive). So I switched to File option, I tried to open Vob files directly. However, I can play open one of my 3 DVDs ( named "exclusive"). The other two don't work ( They are "The Thomas Crown affair" and "Toy story"). The errow message is "input error: read()failed (Input/output error)". Sometime VLC can show a picture window with several green blocks and then freeze. All these disks work well on my Win2K/Win98 boxes.
> 
If you do this: 'dvd/:/mnt/cdrom at 1,1" then VLC expects a unmounted 
device rather then a mount point. This will just fail. You should do:
dvd:/dev/dvd or dvd:/dev/hdc (or on whatever device your DVD drive is 
located.)

If that works, then experiment with starting a chapter/title right away.

> 
> ii)When I tried streaming DVD from VLS, I changed the corresponding parts of input.cfg and vls.cfg. I can't stream none of these 3 DVDs from VLS. The error message is"Error: -1, Info: Unable to start program film (my name to the disk), Info: Error: Module mpegreader: ps2ts not present". Then I copied VoB files to the disk. Still I can only stream the "exclusive", I can't stream none of the other two. A lot of Error message such as "Time discontinuity in PS stream, Looping in Synch !!!!!...." and nothing will appear on clients. 
> 
> iii) I can't get "AC-3 pass through" optiong work when working on Windows. I try to let my USB Yamaha pc audio create surrounding effect. So how can I do it?
> 
> 
> I've raised too many questions. thanks for advice and help in advance.
> 
> Haining
> 



Good luck,
Jean-Paul Saman


-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/lists.html
If you are in trouble, please contact <postmaster at videolan.org>



More information about the vlc mailing list