[vlc] Re: New Streaming Problem

[Danislav Kostov]

Hi! 1st: very very very nice software... and the mailings help a lot.

Benjamin wrote:
There is absolutely no  way to transcode to MPEG4 using a  VIA C3. It is
very  far  to  be  powerful  enough.  Our  tests  show  that  real  time
fullescreen MPEG4 transcoding would at least require a PIV 1.6 GHz.

For the VIA is true, but PIV 1.GHz is not the minimum.
I'v tested real time MPEG4 (720*576) trans with Athlon 1700+, 256 MB,
Ati7000... and it's OK. No missed frames or other problems,....so:
GUYS, test it yourself, like the english says "suck-and-see" :-)))

Best wishes,
Dani, Sofia, Bulgaria.

-----Original Message-----
From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of
Benjamin PRACHT
Sent: Thursday, March 25, 2004 4:45 PM
To: vlc at videolan.org
Subject: [vlc] Re: New Streaming Problem

There is absolutely no  way to transcode to MPEG4 using a  VIA C3. It is
very  far  to  be  powerful  enough.  Our  tests  show  that  real  time
fullescreen MPEG4 transcoding would at least require a PIV 1.6 GHz.

Using a hardware MPEG4 encoding card could be an alternative.

-- 
$(echo "BigBen")

Oui je quote, et alors ?

-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>

-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/support/lists.html
If you are in trouble, please contact <postmaster at videolan.org>