[vlc] Re: Transcoding to H264

[Mark Moriarty]

I just use vcodec=h264, and it works.  h264 ia pretty CPU-intensive -- try
using --sout-transcode-fps=a_reasonably _small_number, and/or limit the
video size.  (if you try to shovel 640x480 30 fps, you'll get to watch your
CPU peg, nothing come out)

  _____  

From: vlc-bounce at videolan.org [mailto:vlc-bounce at videolan.org] On Behalf Of
Michael S. Kazmier
Sent: Saturday, October 30, 2004 9:29 AM
To: vlc at videolan.org
Subject: [vlc] Transcoding to H264



Hello all, 

 

I built the latest CSV with the x264 trunk and all went well.  I was hoping
when I was finished I could do a "-sout '#transcode{vcodec=x264......."  But
no matter what name I put in there for the codec, it doesn't work.  I have
tried, x264, h264, etc.  I have also heard that Mencoder is the preferred
encoder for H264 but not having really any experience with mplayer, I have
not gone that direction.  Are there any "howto"s for the x264
implementation?

 

Thanks,

 

Mike

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 3690 bytes
Desc: not available
URL: <http://mailman.videolan.org/pipermail/vlc/attachments/20041030/4d2da0fb/attachment.bin>