[vlc] DVB with VLC

[Vincent Derrien]

Hi,

I want to stream dvb with VLC, but it can't work.

I've a Hauppauge Nova-S card :
 > lspci -v
0000:02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
         Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / 
Hauppauge WinTV-NOVA-CI DVB card

There is the VLC command I'm using :
vlc -vvv dvb: \
         --program 12240 \
         --dvb-frequency 12610000 \
         --dvb-srate 22000000 \
         --dvb-voltage 13 \
         --dvb-adapter 0 \
         --dvb-satno 1 \
         --dvb-budget-mode \
         --sout-all \
         --ts-es-id-pid \
         --ts-silent \
         --sout udp:10.22.0.10 \
         --ttl 12

And the VLC output :
...
[00000250] dvb access debug: Opening device /dev/dvb/adapter0/frontend0
[00000250] dvb access debug: Frontend Info:
[00000250] dvb access debug:   name = STV0299/TSA5059/SL1935 based
[00000250] dvb access debug:   type = QPSK (DVB-S)
[00000250] dvb access debug:   frequency_min = 950000 (kHz)
[00000250] dvb access debug:   frequency_max = 2150000 (kHz)
[00000250] dvb access debug:   frequency_stepsize = 125
[00000250] dvb access debug:   frequency_tolerance = 32000
[00000250] dvb access debug:   symbol_rate_min = 1000000 (kHz)
[00000250] dvb access debug:   symbol_rate_max = 45000000 (kHz)
[00000250] dvb access debug:   symbol_rate_tolerance (ppm) = 500
[00000250] dvb access debug:   notifier_delay (ms) = 0
[00000250] dvb access debug: Frontend Info capability list:
[00000250] dvb access debug:   inversion auto
[00000250] dvb access debug:   forward error correction 1/2
[00000250] dvb access debug:   forward error correction 2/3
[00000250] dvb access debug:   forward error correction 3/4
[00000250] dvb access debug:   forward error correction 5/6
[00000250] dvb access debug:   forward error correction 7/8
[00000250] dvb access debug:   forward error correction auto
[00000250] dvb access debug:   card can do QPSK
[00000250] dvb access debug: End of capability list
[00000250] dvb access debug: trying to tune the frontend...
[00000250] dvb access debug: using inversion=2
[00000250] dvb access debug: using fec=9
[00000250] dvb access debug: using voltage=13
[00000250] dvb access debug: using tone=1
[00000250] dvb access error: ioctl FE_SET_VOLTAGE failed, voltage=0 (-1) 
Operation not permitted
[00000250] dvb access error: DVB-S: tuning failed
[00000250] access_file access warning: cannot stat() file `' (No such 
file or directory)
[00000250] main access warning: no access2 module matching "dvb" could 
be loaded
[00000239] main input error: no suitable access module for `dvb:'
...

Do you have an idea for this problem ?

Thanks in advance.

Regards,

-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/support/lists.html