[vlc] Re: DVB with VLC

[Benjamin PRACHT]

On Mon, Jan 03, 2005, Vincent Derrien wrote :
> Hi,
> 
> I want to stream dvb with VLC, but it can't work.
> 
> I've a Hauppauge Nova-S card :
> > lspci -v
> 0000:02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
>         Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / 
> Hauppauge WinTV-NOVA-CI DVB card
> 
> There is the VLC command I'm using :
> vlc -vvv dvb: \
>         --program 12240 \
>         --dvb-frequency 12610000 \
>         --dvb-srate 22000000 \
>         --dvb-voltage 13 \
>         --dvb-adapter 0 \
>         --dvb-satno 1 \
>         --dvb-budget-mode \
>         --sout-all \
>         --ts-es-id-pid \
>         --ts-silent \
>         --sout udp:10.22.0.10 \
>         --ttl 12
> 
> And the VLC output :
> ...
> [00000250] dvb access debug: Opening device /dev/dvb/adapter0/frontend0
> [00000250] dvb access debug: Frontend Info:
> [00000250] dvb access debug:   name = STV0299/TSA5059/SL1935 based
> [00000250] dvb access debug:   type = QPSK (DVB-S)
> [00000250] dvb access debug:   frequency_min = 950000 (kHz)
> [00000250] dvb access debug:   frequency_max = 2150000 (kHz)
> [00000250] dvb access debug:   frequency_stepsize = 125
> [00000250] dvb access debug:   frequency_tolerance = 32000
> [00000250] dvb access debug:   symbol_rate_min = 1000000 (kHz)
> [00000250] dvb access debug:   symbol_rate_max = 45000000 (kHz)
> [00000250] dvb access debug:   symbol_rate_tolerance (ppm) = 500
> [00000250] dvb access debug:   notifier_delay (ms) = 0
> [00000250] dvb access debug: Frontend Info capability list:
> [00000250] dvb access debug:   inversion auto
> [00000250] dvb access debug:   forward error correction 1/2
> [00000250] dvb access debug:   forward error correction 2/3
> [00000250] dvb access debug:   forward error correction 3/4
> [00000250] dvb access debug:   forward error correction 5/6
> [00000250] dvb access debug:   forward error correction 7/8
> [00000250] dvb access debug:   forward error correction auto
> [00000250] dvb access debug:   card can do QPSK
> [00000250] dvb access debug: End of capability list
> [00000250] dvb access debug: trying to tune the frontend...
> [00000250] dvb access debug: using inversion=2
> [00000250] dvb access debug: using fec=9
> [00000250] dvb access debug: using voltage=13
> [00000250] dvb access debug: using tone=1
> [00000250] dvb access error: ioctl FE_SET_VOLTAGE failed, voltage=0 (-1) 
> Operation not permitted

Looks as if you don't have the required permissions to write on the
device...

> [00000250] dvb access error: DVB-S: tuning failed
> [00000250] access_file access warning: cannot stat() file `' (No such 
> file or directory)
> [00000250] main access warning: no access2 module matching "dvb" could 
> be loaded
> [00000239] main input error: no suitable access module for `dvb:'
> ...
> 
> Do you have an idea for this problem ?
> 
> Thanks in advance.
> 
> Regards,
> 
> -- 
> This is the vlc mailing-list, see http://www.videolan.org/vlc/
> To unsubscribe, please read http://www.videolan.org/support/lists.html
> 
-- 
BigBen

-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/support/lists.html