[vlc] Re: DVB-S tuning problems

[Jean Paul QUILES]

Use a playlist :
At least 1entry by transponder
better but heavy :1 entry by channel

i did like this to tune DVB-T , i think the same way will work for DVB-S


2005/11/7, Alexander Abraham <tuxifluxi at yahoo.de>:
> Hello @ll,
>
> i not able to tune in some transponders. This problem regards following
> tuning situation...
>
> vlc --color dvb: --dvb-frequency=11836000 --dvb-srate=27500000
> --dvb-voltage=18 --dvb-fec 3 --dvb-satno 2
> --> works :)
>
> now changing to --dvb-frequency=12669000 --dvb-srate=22000000
> --dvb-voltage=13 --dvb-fec 5 --dvb-satno 2
> --> does not work :( via gui. I have to close vlc and have to start this
> transponder via commandline.
>
> I think i am not able to change to another transponder which has another
> dvb-srate and/or dvb-fec. Also i am not able to change my LNBs with a
> DiSEqC command via gui, only commandline is working.
>
> Could someone give me a hint?
>
> OS: Debian
> Kernel: 2.6.14-1-k7
> VLC: 0.8.4-svn20040920
> DVB-S card: KNC ONE TV Station DVB-S
>
> My hardware is ok, i tested the system with the delivered software from
> KNC under Windows.
>
> Thank you for any help,
> Alexander Abraham
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
>
> --
> This is the vlc mailing-list, see http://www.videolan.org/vlc/
> To unsubscribe, please read http://www.videolan.org/support/lists.html
>
>

-- 
This is the vlc mailing-list, see http://www.videolan.org/vlc/
To unsubscribe, please read http://www.videolan.org/support/lists.html