[x265] [PATCH] Edge Aware Quad Tree Establishment
Srikanth Kurapati
srikanth.kurapati at multicorewareinc.com
Mon Feb 10 10:35:19 CET 2020
Thank you. @Aruna Matheswaran <aruna at multicorewareinc.com> please push the
above patch to the repo.
On Mon, Feb 10, 2020 at 3:00 PM Kavitha Sampath <
kavitha at multicorewareinc.com> wrote:
> Looks good to me.
>
> On Fri, Feb 7, 2020 at 3:37 PM <srikanth.kurapati at multicorewareinc.com>
> wrote:
>
>> # HG changeset patch
>> # User Srikanth Kurapati
>> # Date 1580280547 -19800
>> # Wed Jan 29 12:19:07 2020 +0530
>> # Node ID 30d303b38c7bd1733aedd01a3f738fb08ec1488c
>> # Parent fdbd4e4a2aff93bfc14b10efcd9e681a7ebae311
>> Edge Aware Quad Tree Establishment.
>>
>> This patch does the following:
>> 1. Terminates recursion for quadtree establishment using edge information.
>> 2. Adds modes for option "--rskip". Modes 0,1 for current usage and 2,3
>> for edge
>> based recursion skip.
>> 3. Adds option "edge-threshold" to decide recursion skip using CU edge
>> density.
>> 4. Re uses edge information when already available in encoder.
>>
>> diff -r fdbd4e4a2aff -r 30d303b38c7b doc/reST/cli.rst
>> --- a/doc/reST/cli.rst Sat Jan 25 18:08:03 2020 +0530
>> +++ b/doc/reST/cli.rst Wed Jan 29 12:19:07 2020 +0530
>> @@ -842,15 +842,31 @@
>> Measure 2Nx2N merge candidates first; if no residual is found,
>> additional modes at that depth are not analysed. Default disabled
>>
>> -.. option:: --rskip, --no-rskip
>> -
>> - This option determines early exit from CU depth recursion. When a
>> skip CU is
>> - found, additional heuristics (depending on rd-level) are used to
>> decide whether
>> - to terminate recursion. In rdlevels 5 and 6, comparison with
>> inter2Nx2N is used,
>> - while at rdlevels 4 and neighbour costs are used to skip
>> recursion.
>> - Provides minimal quality degradation at good performance gains
>> when enabled.
>> -
>> - Default: enabled, disabled for :option:`--tune grain`
>> +.. option:: --rskip <0|1|2|3>
>> +
>> + This option determines early exit from CU depth recursion in
>> modes 1, 2 and 3. When a skip CU is
>> + found, additional heuristics (depending on RD level and rskip
>> mode) are used to decide whether
>> + to terminate recursion. The following table summarizes the
>> behavior.
>> +
>> +
>> +----------+------------+----------------------------------------------------------------+
>> + | RD Level | Rskip Mode | Skip Recursion Heuristic
>> |
>> +
>> +==========+============+================================================================+
>> + | 0 - 4 | 1 | Neighbour costs.
>> |
>> +
>> +----------+------------+----------------------------------------------------------------+
>> + | 5 - 6 | 1 | Comparison with inter2Nx2N.
>> |
>> +
>> +----------+------------+----------------------------------------------------------------+
>> + | 0 - 6 | 2 | CU edge denstiy.
>> |
>> +
>> +----------+------------+----------------------------------------------------------------+
>> + | 0 - 6 | 3 | CU edge denstiy with forceful skip
>> for lower levels of CTU. |
>> +
>> +----------+------------+----------------------------------------------------------------+
>> +
>> + Provides minimal quality degradation at good performance gains
>> for non-zero modes.
>> + :option:`--rskip mode 0` means disabled. Default: 1, disabled
>> when :option:`--tune grain` is used.
>> +
>> +.. option:: --edge-threshold <0..100>
>> +
>> + Denotes the minimum expected edge-density percentage within the
>> CU, below which the recursion is skipped.
>> + Default: 5, requires :option:`--rskip mode 2|3` to be enabled.
>>
>> .. option:: --splitrd-skip, --no-splitrd-skip
>>
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/CMakeLists.txt
>> --- a/source/CMakeLists.txt Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/CMakeLists.txt Wed Jan 29 12:19:07 2020 +0530
>> @@ -29,7 +29,7 @@
>> option(STATIC_LINK_CRT "Statically link C runtime for release builds"
>> OFF)
>> mark_as_advanced(FPROFILE_USE FPROFILE_GENERATE NATIVE_BUILD)
>> # X265_BUILD must be incremented each time the public API is changed
>> -set(X265_BUILD 188)
>> +set(X265_BUILD 189)
>> configure_file("${PROJECT_SOURCE_DIR}/x265.def.in"
>> "${PROJECT_BINARY_DIR}/x265.def")
>> configure_file("${PROJECT_SOURCE_DIR}/x265_config.h.in"
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/common/common.h
>> --- a/source/common/common.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/common/common.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -129,6 +129,7 @@
>> typedef uint64_t sum2_t;
>> typedef uint64_t pixel4;
>> typedef int64_t ssum2_t;
>> +#define SHIFT_TO_BITPLANE 9
>> #define HISTOGRAM_BINS 1024
>> #define SHIFT 1
>> #else
>> @@ -137,6 +138,7 @@
>> typedef uint32_t sum2_t;
>> typedef uint32_t pixel4;
>> typedef int32_t ssum2_t; // Signed sum
>> +#define SHIFT_TO_BITPLANE 7
>> #define HISTOGRAM_BINS 256
>> #define SHIFT 0
>> #endif // if HIGH_BIT_DEPTH
>> @@ -272,6 +274,9 @@
>> #define MAX_TR_SIZE (1 << MAX_LOG2_TR_SIZE)
>> #define MAX_TS_SIZE (1 << MAX_LOG2_TS_SIZE)
>>
>> +#define RDCOST_BASED_RSKIP 1
>> +#define EDGE_BASED_RSKIP 2
>> +
>> #define COEF_REMAIN_BIN_REDUCTION 3 // indicates the level at which
>> the VLC
>> // transitions from Golomb-Rice to
>> TU+EG(k)
>>
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/common/frame.cpp
>> --- a/source/common/frame.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/common/frame.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -61,6 +61,8 @@
>> m_edgePic = NULL;
>> m_gaussianPic = NULL;
>> m_thetaPic = NULL;
>> + m_edgeBitPlane = NULL;
>> + m_edgeBitPic = NULL;
>> }
>>
>> bool Frame::create(x265_param *param, float* quantOffsets)
>> @@ -115,6 +117,19 @@
>> m_thetaPic = X265_MALLOC(pixel, m_stride * (maxHeight +
>> (m_lumaMarginY * 2)));
>> }
>>
>> + if (param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + {
>> + uint32_t numCuInWidth = (param->sourceWidth + param->maxCUSize -
>> 1) / param->maxCUSize;
>> + uint32_t numCuInHeight = (param->sourceHeight + param->maxCUSize
>> - 1) / param->maxCUSize;
>> + uint32_t lumaMarginX = param->maxCUSize + 32;
>> + uint32_t lumaMarginY = param->maxCUSize + 16;
>> + uint32_t stride = (numCuInWidth * param->maxCUSize) +
>> (lumaMarginX << 1);
>> + uint32_t maxHeight = numCuInHeight * param->maxCUSize;
>> + uint32_t bitPlaneSize = stride * (maxHeight + (lumaMarginY * 2));
>> + CHECKED_MALLOC_ZERO(m_edgeBitPlane, pixel, bitPlaneSize);
>> + m_edgeBitPic = m_edgeBitPlane + lumaMarginY * stride +
>> lumaMarginX;
>> + }
>> +
>> if (m_fencPic->create(param, !!m_param->bCopyPicToFrame) &&
>> m_lowres.create(param, m_fencPic, param->rc.qgSize))
>> {
>> X265_CHECK((m_reconColCount == NULL), "m_reconColCount was
>> initialized");
>> @@ -267,4 +282,10 @@
>> X265_FREE(m_gaussianPic);
>> X265_FREE(m_thetaPic);
>> }
>> +
>> + if (m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + {
>> + X265_FREE_ZERO(m_edgeBitPlane);
>> + m_edgeBitPic = NULL;
>> + }
>> }
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/common/frame.h
>> --- a/source/common/frame.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/common/frame.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -99,7 +99,7 @@
>> float* m_quantOffsets; // points to
>> quantOffsets in x265_picture
>> x265_sei m_userSEI;
>> uint32_t m_picStruct; // picture structure
>> SEI message
>> - x265_dolby_vision_rpu m_rpu;
>> + x265_dolby_vision_rpu m_rpu;
>>
>> /* Frame Parallelism - notification between FrameEncoders of
>> available motion reference rows */
>> ThreadSafeInteger* m_reconRowFlag; // flag of CTU rows
>> completely reconstructed and extended for motion reference
>> @@ -137,6 +137,10 @@
>> pixel* m_gaussianPic;
>> pixel* m_thetaPic;
>>
>> + /* edge bit plane for rskips 2 and 3 */
>> + pixel* m_edgeBitPlane;
>> + pixel* m_edgeBitPic;
>> +
>> Frame();
>>
>> bool create(x265_param *param, float* quantOffsets);
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/common/param.cpp
>> --- a/source/common/param.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/common/param.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -199,6 +199,7 @@
>> param->bEnableWeightedBiPred = 0;
>> param->bEnableEarlySkip = 1;
>> param->bEnableRecursionSkip = 1;
>> + param->edgeThreshold = 0.05f;
>> param->bEnableAMP = 0;
>> param->bEnableRectInter = 0;
>> param->rdLevel = 3;
>> @@ -702,8 +703,9 @@
>> OPT("ref") p->maxNumReferences = atoi(value);
>> OPT("fast-intra") p->bEnableFastIntra = atobool(value);
>> OPT("early-skip") p->bEnableEarlySkip = atobool(value);
>> - OPT("rskip") p->bEnableRecursionSkip = atobool(value);
>> - OPT("me")p->searchMethod = parseName(value, x265_motion_est_names,
>> bError);
>> + OPT("rskip") p->bEnableRecursionSkip = atoi(value);
>> + OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0f;
>> + OPT("me") p->searchMethod = parseName(value, x265_motion_est_names,
>> bError);
>> OPT("subme") p->subpelRefine = atoi(value);
>> OPT("merange") p->searchRange = atoi(value);
>> OPT("rect") p->bEnableRectInter = atobool(value);
>> @@ -919,7 +921,7 @@
>> OPT("max-merge") p->maxNumMergeCand = (uint32_t)atoi(value);
>> OPT("temporal-mvp") p->bEnableTemporalMvp = atobool(value);
>> OPT("early-skip") p->bEnableEarlySkip = atobool(value);
>> - OPT("rskip") p->bEnableRecursionSkip = atobool(value);
>> + OPT("rskip") p->bEnableRecursionSkip = atoi(value);
>> OPT("rdpenalty") p->rdPenalty = atoi(value);
>> OPT("tskip") p->bEnableTransformSkip = atobool(value);
>> OPT("no-tskip-fast") p->bEnableTSkipFast = atobool(value);
>> @@ -1221,6 +1223,7 @@
>> }
>> }
>> OPT("hist-threshold") p->edgeTransitionThreshold = atof(value);
>> + OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0f;
>> OPT("lookahead-threads") p->lookaheadThreads = atoi(value);
>> OPT("opt-cu-delta-qp") p->bOptCUDeltaQP = atobool(value);
>> OPT("multi-pass-opt-analysis") p->analysisMultiPassRefine =
>> atobool(value);
>> @@ -1596,9 +1599,16 @@
>> CHECK(param->rdLevel < 1 || param->rdLevel > 6,
>> "RD Level is out of range");
>> CHECK(param->rdoqLevel < 0 || param->rdoqLevel > 2,
>> - "RDOQ Level is out of range");
>> + "RDOQ Level is out of range");
>> CHECK(param->dynamicRd < 0 || param->dynamicRd >
>> x265_ADAPT_RD_STRENGTH,
>> - "Dynamic RD strength must be between 0 and 4");
>> + "Dynamic RD strength must be between 0 and 4");
>> + CHECK(param->bEnableRecursionSkip > 3 || param->bEnableRecursionSkip
>> < 0,
>> + "Invalid Recursion skip mode. Valid modes 0,1,2,3");
>> + if (param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + {
>> + CHECK(param->edgeThreshold < 0.0f || param->edgeThreshold > 1.0f,
>> + "Minimum edge density percentage for a CU should be an
>> integer between 0 to 100");
>> + }
>> CHECK(param->bframes && param->bframes >= param->lookaheadDepth &&
>> !param->rc.bStatRead,
>> "Lookahead depth must be greater than the max consecutive
>> bframe count");
>> CHECK(param->bframes < 0,
>> @@ -1908,7 +1918,9 @@
>> TOOLVAL(param->psyRdoq, "psy-rdoq=%.2lf");
>> TOOLOPT(param->bEnableRdRefine, "rd-refine");
>> TOOLOPT(param->bEnableEarlySkip, "early-skip");
>> - TOOLOPT(param->bEnableRecursionSkip, "rskip");
>> + TOOLVAL(param->bEnableRecursionSkip, "rskip mode=%d");
>> + if (param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + TOOLVAL(param->edgeThreshold, "rskip-threshold=%.2f");
>> TOOLOPT(param->bEnableSplitRdSkip, "splitrd-skip");
>> TOOLVAL(param->noiseReductionIntra, "nr-intra=%d");
>> TOOLVAL(param->noiseReductionInter, "nr-inter=%d");
>> @@ -2067,6 +2079,9 @@
>> s += sprintf(s, " selective-sao=%d", p->selectiveSAO);
>> BOOL(p->bEnableEarlySkip, "early-skip");
>> BOOL(p->bEnableRecursionSkip, "rskip");
>> + if (p->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + s += sprintf(s, " edge-threshold=%f", p->edgeThreshold);
>> +
>> BOOL(p->bEnableFastIntra, "fast-intra");
>> BOOL(p->bEnableTSkipFast, "tskip-fast");
>> BOOL(p->bCULossless, "cu-lossless");
>> @@ -2374,6 +2389,7 @@
>> dst->rdLevel = src->rdLevel;
>> dst->bEnableEarlySkip = src->bEnableEarlySkip;
>> dst->bEnableRecursionSkip = src->bEnableRecursionSkip;
>> + dst->edgeThreshold = src->edgeThreshold;
>> dst->bEnableFastIntra = src->bEnableFastIntra;
>> dst->bEnableTSkipFast = src->bEnableTSkipFast;
>> dst->bCULossless = src->bCULossless;
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/common/pixel.cpp
>> --- a/source/common/pixel.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/common/pixel.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -876,6 +876,18 @@
>> }
>> }
>>
>> +static void planecopy_pp_shr_c(const pixel* src, intptr_t srcStride,
>> pixel* dst, intptr_t dstStride, int width, int height, int shift)
>> +{
>> + for (int r = 0; r < height; r++)
>> + {
>> + for (int c = 0; c < width; c++)
>> + dst[c] = (pixel)((src[c] >> shift));
>> +
>> + dst += dstStride;
>> + src += srcStride;
>> + }
>> +}
>> +
>> static void planecopy_sp_shl_c(const uint16_t* src, intptr_t srcStride,
>> pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t
>> mask)
>> {
>> for (int r = 0; r < height; r++)
>> @@ -1316,6 +1328,7 @@
>> p.planecopy_cp = planecopy_cp_c;
>> p.planecopy_sp = planecopy_sp_c;
>> p.planecopy_sp_shl = planecopy_sp_shl_c;
>> + p.planecopy_pp_shr = planecopy_pp_shr_c;
>> #if HIGH_BIT_DEPTH
>> p.planeClipAndMax = planeClipAndMax_c;
>> #endif
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/common/primitives.h
>> --- a/source/common/primitives.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/common/primitives.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -204,6 +204,7 @@
>> typedef void (*sign_t)(int8_t *dst, const pixel *src1, const pixel
>> *src2, const int endX);
>> typedef void (*planecopy_cp_t) (const uint8_t* src, intptr_t srcStride,
>> pixel* dst, intptr_t dstStride, int width, int height, int shift);
>> typedef void (*planecopy_sp_t) (const uint16_t* src, intptr_t srcStride,
>> pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t
>> mask);
>> +typedef void (*planecopy_pp_t) (const pixel* src, intptr_t srcStride,
>> pixel* dst, intptr_t dstStride, int width, int height, int shift);
>> typedef pixel (*planeClipAndMax_t)(pixel *src, intptr_t stride, int
>> width, int height, uint64_t *outsum, const pixel minPix, const pixel
>> maxPix);
>>
>> typedef void (*cutree_propagate_cost) (int* dst, const uint16_t*
>> propagateIn, const int32_t* intraCosts, const uint16_t* interCosts, const
>> int32_t* invQscales, const double* fpsFactor, int len);
>> @@ -358,6 +359,7 @@
>> planecopy_cp_t planecopy_cp;
>> planecopy_sp_t planecopy_sp;
>> planecopy_sp_t planecopy_sp_shl;
>> + planecopy_pp_t planecopy_pp_shr;
>> planeClipAndMax_t planeClipAndMax;
>>
>> weightp_sp_t weight_sp;
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/encoder/analysis.cpp
>> --- a/source/encoder/analysis.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/encoder/analysis.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -1317,12 +1317,21 @@
>> if (md.bestMode && m_param->bEnableRecursionSkip &&
>> !bCtuInfoCheck && !(m_param->bAnalysisType == AVC_INFO &&
>> m_param->analysisLoadReuseLevel == 7 && (m_modeFlag[0] || m_modeFlag[1])))
>> {
>> skipRecursion = md.bestMode->cu.isSkipped(0);
>> - if (mightSplit && depth >= minDepth && !skipRecursion)
>> + if (mightSplit && !skipRecursion)
>> {
>> - if (depth)
>> - skipRecursion = recursionDepthCheck(parentCTU,
>> cuGeom, *md.bestMode);
>> - if (m_bHD && !skipRecursion && m_param->rdLevel == 2 &&
>> md.fencYuv.m_size != MAX_CU_SIZE)
>> + if (depth >= minDepth && m_param->bEnableRecursionSkip
>> == RDCOST_BASED_RSKIP)
>> + {
>> + if (depth)
>> + skipRecursion = recursionDepthCheck(parentCTU,
>> cuGeom, *md.bestMode);
>> + if (m_bHD && !skipRecursion && m_param->rdLevel == 2
>> && md.fencYuv.m_size != MAX_CU_SIZE)
>> + skipRecursion = complexityCheckCU(*md.bestMode);
>> + }
>> + else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 &&
>> m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + {
>> skipRecursion = complexityCheckCU(*md.bestMode);
>> + }
>> + else if (m_param->bEnableRecursionSkip >
>> EDGE_BASED_RSKIP)
>> + skipRecursion = true;
>> }
>> }
>> if (m_param->bAnalysisType == AVC_INFO && md.bestMode &&
>> cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
>> @@ -2015,8 +2024,12 @@
>> checkInter_rd5_6(md.pred[PRED_2Nx2N], cuGeom, SIZE_2Nx2N,
>> refMasks);
>> checkBestMode(md.pred[PRED_2Nx2N], cuGeom.depth);
>>
>> - if (m_param->bEnableRecursionSkip && depth &&
>> m_modeDepth[depth - 1].bestMode)
>> + if (m_param->bEnableRecursionSkip == RDCOST_BASED_RSKIP &&
>> depth && m_modeDepth[depth - 1].bestMode)
>> skipRecursion = md.bestMode &&
>> !md.bestMode->cu.getQtRootCbf(0);
>> + else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 &&
>> m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + skipRecursion = md.bestMode &&
>> complexityCheckCU(*md.bestMode);
>> + else if (m_param->bEnableRecursionSkip > EDGE_BASED_RSKIP)
>> + skipRecursion = true;
>> }
>> if (m_param->bAnalysisType == AVC_INFO && md.bestMode &&
>> cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
>> skipRecursion = true;
>> @@ -3525,27 +3538,47 @@
>>
>> bool Analysis::complexityCheckCU(const Mode& bestMode)
>> {
>> - uint32_t mean = 0;
>> - uint32_t homo = 0;
>> - uint32_t cuSize = bestMode.fencYuv->m_size;
>> - for (uint32_t y = 0; y < cuSize; y++) {
>> - for (uint32_t x = 0; x < cuSize; x++) {
>> - mean += (bestMode.fencYuv->m_buf[0][y * cuSize + x]);
>> + if (m_param->bEnableRecursionSkip == RDCOST_BASED_RSKIP)
>> + {
>> + uint32_t mean = 0;
>> + uint32_t homo = 0;
>> + uint32_t cuSize = bestMode.fencYuv->m_size;
>> + for (uint32_t y = 0; y < cuSize; y++) {
>> + for (uint32_t x = 0; x < cuSize; x++) {
>> + mean += (bestMode.fencYuv->m_buf[0][y * cuSize + x]);
>> + }
>> }
>> + mean = mean / (cuSize * cuSize);
>> + for (uint32_t y = 0; y < cuSize; y++) {
>> + for (uint32_t x = 0; x < cuSize; x++) {
>> + homo += abs(int(bestMode.fencYuv->m_buf[0][y * cuSize +
>> x] - mean));
>> + }
>> + }
>> + homo = homo / (cuSize * cuSize);
>> +
>> + if (homo < (.1 * mean))
>> + return true;
>> +
>> + return false;
>> }
>> - mean = mean / (cuSize * cuSize);
>> - for (uint32_t y = 0 ; y < cuSize; y++){
>> - for (uint32_t x = 0 ; x < cuSize; x++){
>> - homo += abs(int(bestMode.fencYuv->m_buf[0][y * cuSize + x] -
>> mean));
>> - }
>> + else
>> + {
>> + int blockType = bestMode.cu.m_log2CUSize[0] - 2;
>> + int shift = bestMode.cu.m_log2CUSize[0] * 2;
>> + intptr_t stride = m_frame->m_fencPic->m_stride;
>> + intptr_t blockOffsetLuma = bestMode.cu.m_cuPelX +
>> bestMode.cu.m_cuPelY * stride;
>> + uint64_t sum_ss = primitives.cu[blockType].var(m_frame->m_edgeBitPic
>> + blockOffsetLuma, stride);
>> + uint32_t sum = (uint32_t)sum_ss;
>> + uint32_t ss = (uint32_t)(sum_ss >> 32);
>> + uint32_t pixelCount = 1 << shift;
>> + double cuEdgeVariance = (ss - ((double)sum * sum / pixelCount))
>> / pixelCount;
>> +
>> + if (cuEdgeVariance > (double)m_param->edgeThreshold)
>> + return false;
>> + else
>> + return true;
>> }
>> - homo = homo / (cuSize * cuSize);
>> -
>> - if (homo < (.1 * mean))
>> - return true;
>> -
>> - return false;
>> -}
>> + }
>>
>> uint32_t Analysis::calculateCUVariance(const CUData& ctu, const CUGeom&
>> cuGeom)
>> {
>> @@ -3570,7 +3603,6 @@
>> cnt++;
>> }
>> }
>> -
>> return cuVariance / cnt;
>> }
>>
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/encoder/analysis.h
>> --- a/source/encoder/analysis.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/encoder/analysis.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -52,7 +52,7 @@
>> splitRefs = 0;
>> mvCost[0] = 0; // L0
>> mvCost[1] = 0; // L1
>> - sa8dCost = 0;
>> + sa8dCost = 0;
>> }
>> };
>>
>> @@ -120,7 +120,6 @@
>>
>> Mode& compressCTU(CUData& ctu, Frame& frame, const CUGeom& cuGeom,
>> const Entropy& initialContext);
>> int32_t loadTUDepth(CUGeom cuGeom, CUData parentCTU);
>> -
>> protected:
>> /* Analysis data for save/load mode, writes/reads data based on
>> absPartIdx */
>> x265_analysis_inter_data* m_reuseInterDataCTU;
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/encoder/encoder.cpp
>> --- a/source/encoder/encoder.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/encoder/encoder.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -1343,9 +1343,9 @@
>> int32_t numBytes = m_param->sourceBitDepth > 8 ? 2 : 1;
>> memset(m_edgePic, 0, bufSize * numBytes);
>>
>> - if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height,
>> pic->width, false))
>> - {
>> - x265_log(m_param, X265_LOG_ERROR, "Failed edge computation!");
>> + if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height,
>> pic->width, false, 1))
>> + {
>> + x265_log(m_param, X265_LOG_ERROR, "Failed to compute edge!");
>> return false;
>> }
>>
>> @@ -1660,6 +1660,12 @@
>> }
>> }
>> }
>> + if (m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP &&
>> m_param->bHistBasedSceneCut)
>> + {
>> + pixel* src = m_edgePic;
>> + primitives.planecopy_pp_shr(src,
>> inFrame->m_fencPic->m_picWidth, inFrame->m_edgeBitPic,
>> inFrame->m_fencPic->m_stride,
>> + inFrame->m_fencPic->m_picWidth,
>> inFrame->m_fencPic->m_picHeight, 0);
>> + }
>> }
>> else
>> {
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/encoder/frameencoder.cpp
>> --- a/source/encoder/frameencoder.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/encoder/frameencoder.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -130,7 +130,7 @@
>> {
>> rowSum += sliceGroupSizeAccu;
>> m_sliceBaseRow[++sidx] = i;
>> - }
>> + }
>> }
>> X265_CHECK(sidx < m_param->maxSlices, "sliceID check failed!");
>> m_sliceBaseRow[0] = 0;
>> @@ -268,6 +268,19 @@
>> curFrame->m_encData->m_jobProvider = this;
>> curFrame->m_encData->m_slice->m_mref = m_mref;
>>
>> + if (!m_param->bHistBasedSceneCut && m_param->rc.aqMode !=
>> X265_AQ_EDGE && m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
>> + {
>> + int height = curFrame->m_fencPic->m_picHeight;
>> + int width = curFrame->m_fencPic->m_picWidth;
>> + intptr_t stride = curFrame->m_fencPic->m_stride;
>> +
>> + if (!computeEdge(curFrame->m_edgeBitPic,
>> curFrame->m_fencPic->m_picOrg[0], NULL, stride, height, width, false, 1))
>> + {
>> + x265_log(m_param, X265_LOG_ERROR, " Failed to compute edge
>> !");
>> + return false;
>> + }
>> + }
>> +
>> if (!m_cuGeoms)
>> {
>> if (!initializeGeoms())
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/encoder/slicetype.cpp
>> --- a/source/encoder/slicetype.cpp Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/encoder/slicetype.cpp Wed Jan 29 12:19:07 2020 +0530
>> @@ -87,7 +87,7 @@
>>
>> namespace X265_NS {
>>
>> -bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta,
>> intptr_t stride, int height, int width, bool bcalcTheta)
>> +bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta,
>> intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel)
>> {
>> intptr_t rowOne = 0, rowTwo = 0, rowThree = 0, colOne = 0, colTwo =
>> 0, colThree = 0;
>> intptr_t middle = 0, topLeft = 0, topRight = 0, bottomLeft = 0,
>> bottomRight = 0;
>> @@ -141,7 +141,7 @@
>> theta = 180 + theta;
>> edgeTheta[middle] = (pixel)theta;
>> }
>> - edgePic[middle] = (pixel)(gradientMagnitude >=
>> edgeThreshold ? edgeThreshold : blackPixel);
>> + edgePic[middle] = (pixel)(gradientMagnitude >=
>> EDGE_THRESHOLD ? whitePixel : blackPixel);
>> }
>> }
>> return true;
>> @@ -519,6 +519,13 @@
>> if (param->rc.aqMode == X265_AQ_EDGE)
>> edgeFilter(curFrame, param);
>>
>> + if (param->rc.aqMode == X265_AQ_EDGE &&
>> !param->bHistBasedSceneCut && param->bEnableRecursionSkip >=
>> EDGE_BASED_RSKIP)
>> + {
>> + pixel* src = curFrame->m_edgePic +
>> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
>> curFrame->m_fencPic->m_lumaMarginX;
>> + primitives.planecopy_pp_shr(src,
>> curFrame->m_fencPic->m_stride, curFrame->m_edgeBitPic,
>> + curFrame->m_fencPic->m_stride,
>> curFrame->m_fencPic->m_picWidth, curFrame->m_fencPic->m_picHeight,
>> SHIFT_TO_BITPLANE);
>> + }
>> +
>> if (param->rc.aqMode == X265_AQ_AUTO_VARIANCE ||
>> param->rc.aqMode == X265_AQ_AUTO_VARIANCE_BIASED || param->rc.aqMode ==
>> X265_AQ_EDGE)
>> {
>> double bit_depth_correction = 1.f / (1 << (2 *
>> (X265_DEPTH - 8)));
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/encoder/slicetype.h
>> --- a/source/encoder/slicetype.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/encoder/slicetype.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -44,9 +44,9 @@
>> #define EDGE_INCLINATION 45
>>
>> #if HIGH_BIT_DEPTH
>> -#define edgeThreshold 1023.0
>> +#define EDGE_THRESHOLD 1023.0
>> #else
>> -#define edgeThreshold 255.0
>> +#define EDGE_THRESHOLD 255.0
>> #endif
>> #define PI 3.14159265
>>
>> @@ -101,7 +101,7 @@
>> protected:
>>
>> uint32_t acEnergyCu(Frame* curFrame, uint32_t blockX, uint32_t
>> blockY, int csp, uint32_t qgSize);
>> - uint32_t edgeDensityCu(Frame*curFrame, uint32_t &avgAngle, uint32_t
>> blockX, uint32_t blockY, uint32_t qgSize);
>> + uint32_t edgeDensityCu(Frame* curFrame, uint32_t &avgAngle, uint32_t
>> blockX, uint32_t blockY, uint32_t qgSize);
>> uint32_t lumaSumCu(Frame* curFrame, uint32_t blockX, uint32_t
>> blockY, uint32_t qgSize);
>> uint32_t weightCostLuma(Lowres& fenc, Lowres& ref, WeightParam& wp);
>> bool allocWeightedRef(Lowres& fenc);
>> @@ -265,7 +265,6 @@
>> CostEstimateGroup& operator=(const CostEstimateGroup&);
>> };
>>
>> -bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta,
>> intptr_t stride, int height, int width, bool bcalcTheta);
>> -
>> +bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta,
>> intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel =
>> EDGE_THRESHOLD);
>> }
>> #endif // ifndef X265_SLICETYPE_H
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/test/regression-tests.txt
>> --- a/source/test/regression-tests.txt Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/test/regression-tests.txt Wed Jan 29 12:19:07 2020 +0530
>> @@ -162,7 +162,11 @@
>> sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut
>> --hist-threshold 0.02 --frame-dup --dup-threshold 60 --hrd --bitrate 10000
>> --vbv-bufsize 15000 --vbv-maxrate 12000
>> sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut
>> --hist-threshold 0.02
>> sintel_trailer_2k_1920x1080_24.yuv, --preset ultrafast --hist-scenecut
>> --hist-threshold 0.02
>> -
>> +crowd_run_1080p50.yuv, --preset faster --ctu 32 --rskip 2
>> --edge-threshold 5
>> +crowd_run_1080p50.yuv, --preset fast --ctu 64 --rskip 2 --edge-threshold
>> 5 --aq-mode 4
>> +crowd_run_1080p50.yuv, --preset slow --ctu 32 --rskip 2 --edge-threshold
>> 5 --hist-scenecut --hist-threshold 0.1
>> +crowd_run_1080p50.yuv, --preset slower --ctu 16 --rskip 2
>> --edge-threshold 5 --hist-scenecut --hist-threshold 0.1 --aq-mode 4
>> +
>> # Main12 intraCost overflow bug test
>> 720p50_parkrun_ter.y4m,--preset medium
>>
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/x265.h
>> --- a/source/x265.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/x265.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -1255,9 +1255,9 @@
>> * skip blocks. Default is disabled */
>> int bEnableEarlySkip;
>>
>> - /* Enable early CU size decisions to avoid recursing to higher
>> depths.
>> + /* Enable early CU size decisions to avoid recursing to higher
>> depths.
>> * Default is enabled */
>> - int bEnableRecursionSkip;
>> + int bEnableRecursionSkip;
>>
>> /* Use a faster search method to find the best intra mode. Default
>> is 0 */
>> int bEnableFastIntra;
>> @@ -1857,7 +1857,7 @@
>> double edgeTransitionThreshold;
>>
>> /* Enables histogram based scenecut detection algorithm to detect
>> scenecuts. Default disabled */
>> - int bHistBasedSceneCut;
>> + int bHistBasedSceneCut;
>>
>> /* Enable HME search ranges for L0, L1 and L2 respectively. */
>> int hmeRange[3];
>> @@ -1874,7 +1874,7 @@
>> * analysis information stored in analysis-save. Higher the refine
>> level higher
>> * the information stored. Default is 5 */
>> int analysisSaveReuseLevel;
>> -
>> +
>> /* A value between 1 and 10 (both inclusive) determines the level of
>> * analysis information reused in analysis-load. Higher the refine
>> level higher
>> * the information reused. Default is 5 */
>> @@ -1901,6 +1901,9 @@
>> * info is available from the corresponding analysis-save. */
>>
>> int confWinBottomOffset;
>> +
>> + /* Edge variance threshold for quad tree establishment. */
>> + float edgeThreshold;
>> } x265_param;
>>
>> /* x265_param_alloc:
>> diff -r fdbd4e4a2aff -r 30d303b38c7b source/x265cli.h
>> --- a/source/x265cli.h Sat Jan 25 18:08:03 2020 +0530
>> +++ b/source/x265cli.h Wed Jan 29 12:19:07 2020 +0530
>> @@ -105,8 +105,8 @@
>> { "amp", no_argument, NULL, 0 },
>> { "no-early-skip", no_argument, NULL, 0 },
>> { "early-skip", no_argument, NULL, 0 },
>> - { "no-rskip", no_argument, NULL, 0 },
>> - { "rskip", no_argument, NULL, 0 },
>> + { "rskip", required_argument, NULL, 0 },
>> + { "edge-threshold", required_argument, NULL, 0 },
>> { "no-fast-cbf", no_argument, NULL, 0 },
>> { "fast-cbf", no_argument, NULL, 0 },
>> { "no-tskip", no_argument, NULL, 0 },
>> @@ -457,7 +457,9 @@
>> H0(" --[no-]ssim-rd Enable ssim rate distortion
>> optimization, 0 to disable. Default %s\n", OPT(param->bSsimRd));
>> H0(" --[no-]rd-refine Enable QP based RD refinement
>> for rd levels 5 and 6. Default %s\n", OPT(param->bEnableRdRefine));
>> H0(" --[no-]early-skip Enable early SKIP detection.
>> Default %s\n", OPT(param->bEnableEarlySkip));
>> - H0(" --[no-]rskip Enable early exit from
>> recursion. Default %s\n", OPT(param->bEnableRecursionSkip));
>> + H0(" --rskip <mode> Set mode for early exit from
>> recursion. Mode 1: exit using rdcost. Mode 2: exit using edge density. Mode
>> 3: exit using edge density with forceful skip for small sized CU's."
>> + " Mode 0: disabled. Default
>> %s\n", OPT(param->bEnableRecursionSkip));
>> + H1(" --edge-threshold Threshold in terms of
>> percentage for minimum edge density in CUs to terminate the recursion
>> depth. Applicable only for rskip modes 2 and 3. Default %s\n",
>> OPT(param->edgeThreshold));
>> H1(" --[no-]tskip-fast Enable fast intra transform
>> skipping. Default %s\n", OPT(param->bEnableTSkipFast));
>> H1(" --[no-]splitrd-skip Enable skipping split RD
>> analysis when sum of split CU rdCost larger than one split CU rdCost for
>> Intra CU. Default %s\n", OPT(param->bEnableSplitRdSkip));
>> H1(" --nr-intra <integer> An integer value in range of 0
>> to 2000, which denotes strength of noise reduction in intra CUs. Default
>> 0\n");
>> _______________________________________________
>> x265-devel mailing list
>> x265-devel at videolan.org
>> https://mailman.videolan.org/listinfo/x265-devel
>>
>
>
> --
> Regards,
> Kavitha
> _______________________________________________
> x265-devel mailing list
> x265-devel at videolan.org
> https://mailman.videolan.org/listinfo/x265-devel
>
--
*With Regards,*
*Srikanth Kurapati.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/x265-devel/attachments/20200210/8e1455fc/attachment-0001.html>
More information about the x265-devel
mailing list