[x265] [PATCH] Edge Aware Quad Tree Establishment
Srikanth Kurapati
srikanth.kurapati at multicorewareinc.com
Tue Jan 7 03:43:44 CET 2020
Please ignore this email. I will resend the final one immediately.
On Mon, Jan 6, 2020 at 4:02 PM <srikanth.kurapati at multicorewareinc.com>
wrote:
> # HG changeset patch
> # User Srikanth Kurapati
> # Date 1577432829 -19800
> # Fri Dec 27 13:17:09 2019 +0530
> # Node ID 99c608bd88538ca77556fed672bc6302625dfdf0
> # Parent 19f6ed1659197aaa4bd78b69eb58139e879230d9
> Edge Aware Quad Tree Establishment.
>
> This patch does the following:
> 1. Terminates recursion using edge information.
> 2. Adds modes for "--rskip". Modes 0,1 for current usage and 2 for edge
> based rskip.
> 3. Adds option "edge-threshold" to decide recursion skip using CU edge
> density.
> 4. Re uses edge information when already available in encoder.
>
> diff -r 19f6ed165919 -r 99c608bd8853 doc/reST/cli.rst
> --- a/doc/reST/cli.rst Mon Dec 30 11:58:44 2019 +0530
> +++ b/doc/reST/cli.rst Fri Dec 27 13:17:09 2019 +0530
> @@ -842,15 +842,20 @@
> Measure 2Nx2N merge candidates first; if no residual is found,
> additional modes at that depth are not analysed. Default disabled
>
> -.. option:: --rskip, --no-rskip
> -
> - This option determines early exit from CU depth recursion. When a
> skip CU is
> - found, additional heuristics (depending on rd-level) are used to
> decide whether
> - to terminate recursion. In rdlevels 5 and 6, comparison with
> inter2Nx2N is used,
> - while at rdlevels 4 and neighbour costs are used to skip recursion.
> - Provides minimal quality degradation at good performance gains
> when enabled.
> -
> - Default: enabled, disabled for :option:`--tune grain`
> +.. option:: --rskip <0|1|2>
> +
> + This option determines early exit from CU depth recursion when
> enabled. When a skip CU is
> + found, additional heuristics (depending on rd-level and rskip
> mode) are used to decide whether
> + to terminate recursion. In rdlevels 5 and 6, comparison with
> inter2Nx2N is used,
> + while at rdlevels 4 and below, neighbour costs are used to skip
> recursion in mode 1, and CU edge density in mode 2.
> + Provides minimal quality degradation at good performance gains
> when enabled. R-skip mode 0 means disabled.
> +
> + Default: 1, disabled when :option:`--tune grain` is used.
> +
> +.. option:: --edge-threshold <0..100>
> +
> + Denotes the minimum percentage of edge density in the CU, below
> which the recursion is skipped.
> + Default: 5, requires :option:`--rskip mode 2` to be enabled.
>
> .. option:: --splitrd-skip, --no-splitrd-skip
>
> diff -r 19f6ed165919 -r 99c608bd8853 source/CMakeLists.txt
> --- a/source/CMakeLists.txt Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/CMakeLists.txt Fri Dec 27 13:17:09 2019 +0530
> @@ -29,7 +29,7 @@
> option(STATIC_LINK_CRT "Statically link C runtime for release builds" OFF)
> mark_as_advanced(FPROFILE_USE FPROFILE_GENERATE NATIVE_BUILD)
> # X265_BUILD must be incremented each time the public API is changed
> -set(X265_BUILD 184)
> +set(X265_BUILD 185)
> configure_file("${PROJECT_SOURCE_DIR}/x265.def.in"
> "${PROJECT_BINARY_DIR}/x265.def")
> configure_file("${PROJECT_SOURCE_DIR}/x265_config.h.in"
> diff -r 19f6ed165919 -r 99c608bd8853 source/common/common.h
> --- a/source/common/common.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/common/common.h Fri Dec 27 13:17:09 2019 +0530
> @@ -129,6 +129,7 @@
> typedef uint64_t sum2_t;
> typedef uint64_t pixel4;
> typedef int64_t ssum2_t;
> +#define SHIFT_TO_BITPLANE 9
> #define HISTOGRAM_BINS 1024
> #define SHIFT 1
> #else
> @@ -137,6 +138,7 @@
> typedef uint32_t sum2_t;
> typedef uint32_t pixel4;
> typedef int32_t ssum2_t; // Signed sum
> +#define SHIFT_TO_BITPLANE 7
> #define HISTOGRAM_BINS 256
> #define SHIFT 0
> #endif // if HIGH_BIT_DEPTH
> @@ -272,6 +274,9 @@
> #define MAX_TR_SIZE (1 << MAX_LOG2_TR_SIZE)
> #define MAX_TS_SIZE (1 << MAX_LOG2_TS_SIZE)
>
> +#define RDCOST_BASED_RSKIP 1
> +#define EDGE_BASED_RSKIP 2
> +
> #define COEF_REMAIN_BIN_REDUCTION 3 // indicates the level at which the
> VLC
> // transitions from Golomb-Rice to
> TU+EG(k)
>
> diff -r 19f6ed165919 -r 99c608bd8853 source/common/frame.cpp
> --- a/source/common/frame.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/common/frame.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -61,6 +61,7 @@
> m_edgePic = NULL;
> m_gaussianPic = NULL;
> m_thetaPic = NULL;
> + m_edgeBitPlane = NULL;
> }
>
> bool Frame::create(x265_param *param, float* quantOffsets)
> @@ -115,6 +116,18 @@
> m_thetaPic = X265_MALLOC(pixel, m_stride * (maxHeight +
> (m_lumaMarginY * 2)));
> }
>
> + if (param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
> + {
> + uint32_t numCuInWidth = (param->sourceWidth + param->maxCUSize -
> 1) / param->maxCUSize;
> + uint32_t numCuInHeight = (param->sourceHeight + param->maxCUSize
> - 1) / param->maxCUSize;
> + uint32_t lumaMarginX = param->maxCUSize + 32;
> + uint32_t lumaMarginY = param->maxCUSize + 16;
> + uint64_t stride = (numCuInWidth * param->maxCUSize) +
> (lumaMarginX << 1);
> + uint32_t maxHeight = numCuInHeight * param->maxCUSize;
> + m_bitPlaneSize = stride * (maxHeight + (lumaMarginY * 2));
> + CHECKED_MALLOC_ZERO(m_edgeBitPlane, pixel, m_bitPlaneSize);
> + }
> +
> if (m_fencPic->create(param, !!m_param->bCopyPicToFrame) &&
> m_lowres.create(param, m_fencPic, param->rc.qgSize))
> {
> X265_CHECK((m_reconColCount == NULL), "m_reconColCount was
> initialized");
> @@ -267,4 +280,9 @@
> X265_FREE(m_gaussianPic);
> X265_FREE(m_thetaPic);
> }
> +
> + if (m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
> + {
> + X265_FREE(m_edgeBitPlane);
> + }
> }
> diff -r 19f6ed165919 -r 99c608bd8853 source/common/frame.h
> --- a/source/common/frame.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/common/frame.h Fri Dec 27 13:17:09 2019 +0530
> @@ -137,6 +137,8 @@
> pixel* m_gaussianPic;
> pixel* m_thetaPic;
>
> + pixel* m_edgeBitPlane;
> + uint64_t m_bitPlaneSize;
> Frame();
>
> bool create(x265_param *param, float* quantOffsets);
> diff -r 19f6ed165919 -r 99c608bd8853 source/common/param.cpp
> --- a/source/common/param.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/common/param.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -198,6 +198,7 @@
> param->bEnableWeightedBiPred = 0;
> param->bEnableEarlySkip = 1;
> param->bEnableRecursionSkip = 1;
> + param->edgeThreshold = 5.0;
> param->bEnableAMP = 0;
> param->bEnableRectInter = 0;
> param->rdLevel = 3;
> @@ -694,7 +695,8 @@
> OPT("ref") p->maxNumReferences = atoi(value);
> OPT("fast-intra") p->bEnableFastIntra = atobool(value);
> OPT("early-skip") p->bEnableEarlySkip = atobool(value);
> - OPT("rskip") p->bEnableRecursionSkip = atobool(value);
> + OPT("rskip") p->bEnableRecursionSkip = atoi(value);
> + OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0;
> OPT("me")p->searchMethod = parseName(value, x265_motion_est_names,
> bError);
> OPT("subme") p->subpelRefine = atoi(value);
> OPT("merange") p->searchRange = atoi(value);
> @@ -911,7 +913,7 @@
> OPT("max-merge") p->maxNumMergeCand = (uint32_t)atoi(value);
> OPT("temporal-mvp") p->bEnableTemporalMvp = atobool(value);
> OPT("early-skip") p->bEnableEarlySkip = atobool(value);
> - OPT("rskip") p->bEnableRecursionSkip = atobool(value);
> + OPT("rskip") p->bEnableRecursionSkip = atoi(value);
> OPT("rdpenalty") p->rdPenalty = atoi(value);
> OPT("tskip") p->bEnableTransformSkip = atobool(value);
> OPT("no-tskip-fast") p->bEnableTSkipFast = atobool(value);
> @@ -1213,6 +1215,7 @@
> }
> }
> OPT("hist-threshold") p->edgeTransitionThreshold = atof(value);
> + OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0;
> OPT("lookahead-threads") p->lookaheadThreads = atoi(value);
> OPT("opt-cu-delta-qp") p->bOptCUDeltaQP = atobool(value);
> OPT("multi-pass-opt-analysis") p->analysisMultiPassRefine =
> atobool(value);
> @@ -1579,9 +1582,13 @@
> CHECK(param->rdLevel < 1 || param->rdLevel > 6,
> "RD Level is out of range");
> CHECK(param->rdoqLevel < 0 || param->rdoqLevel > 2,
> - "RDOQ Level is out of range");
> + "RDOQ Level is out of range");
> CHECK(param->dynamicRd < 0 || param->dynamicRd >
> x265_ADAPT_RD_STRENGTH,
> - "Dynamic RD strength must be between 0 and 4");
> + "Dynamic RD strength must be between 0 and 4");
> + CHECK(param->bEnableRecursionSkip > 2 || param->bEnableRecursionSkip
> < 0,
> + "Invalid Recursion skip mode. Valid modes 0,1,2");
> + CHECK(param->edgeThreshold < 0 || param->edgeThreshold > 100,
> + "Percentage Edge threshold for a CU should be integer between 0
> to 100");
> CHECK(param->bframes && param->bframes >= param->lookaheadDepth &&
> !param->rc.bStatRead,
> "Lookahead depth must be greater than the max consecutive
> bframe count");
> CHECK(param->bframes < 0,
> @@ -1887,7 +1894,11 @@
> TOOLVAL(param->psyRdoq, "psy-rdoq=%.2lf");
> TOOLOPT(param->bEnableRdRefine, "rd-refine");
> TOOLOPT(param->bEnableEarlySkip, "early-skip");
> - TOOLOPT(param->bEnableRecursionSkip, "rskip");
> + TOOLVAL(param->bEnableRecursionSkip, "rskip mode=%d");
> + if (param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
> + {
> + TOOLVAL(param->edgeThreshold, "rskip-threshold=%.2lf");
> + }
> TOOLOPT(param->bEnableSplitRdSkip, "splitrd-skip");
> TOOLVAL(param->noiseReductionIntra, "nr-intra=%d");
> TOOLVAL(param->noiseReductionInter, "nr-inter=%d");
> @@ -2046,6 +2057,10 @@
> s += sprintf(s, " selective-sao=%d", p->selectiveSAO);
> BOOL(p->bEnableEarlySkip, "early-skip");
> BOOL(p->bEnableRecursionSkip, "rskip");
> + if (p->bEnableRecursionSkip == EDGE_BASED_RSKIP)
> + {
> + s += sprintf(s, " edge-threshold=%lf", p->edgeThreshold);
> + }
> BOOL(p->bEnableFastIntra, "fast-intra");
> BOOL(p->bEnableTSkipFast, "tskip-fast");
> BOOL(p->bCULossless, "cu-lossless");
> @@ -2350,6 +2365,7 @@
> dst->rdLevel = src->rdLevel;
> dst->bEnableEarlySkip = src->bEnableEarlySkip;
> dst->bEnableRecursionSkip = src->bEnableRecursionSkip;
> + dst->edgeThreshold = src->edgeThreshold;
> dst->bEnableFastIntra = src->bEnableFastIntra;
> dst->bEnableTSkipFast = src->bEnableTSkipFast;
> dst->bCULossless = src->bCULossless;
> diff -r 19f6ed165919 -r 99c608bd8853 source/common/pixel.cpp
> --- a/source/common/pixel.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/common/pixel.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -876,6 +876,18 @@
> }
> }
>
> +static void planecopy_pp_shr_c(const pixel* src, intptr_t srcStride,
> pixel* dst, intptr_t dstStride, int width, int height, int shift)
> +{
> + for (int r = 0; r < height; r++)
> + {
> + for (int c = 0; c < width; c++)
> + dst[c] = (pixel)((src[c] >> shift));
> +
> + dst += dstStride;
> + src += srcStride;
> + }
> +}
> +
> static void planecopy_sp_shl_c(const uint16_t* src, intptr_t srcStride,
> pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t
> mask)
> {
> for (int r = 0; r < height; r++)
> @@ -1316,6 +1328,7 @@
> p.planecopy_cp = planecopy_cp_c;
> p.planecopy_sp = planecopy_sp_c;
> p.planecopy_sp_shl = planecopy_sp_shl_c;
> + p.planecopy_pp_shr = planecopy_pp_shr_c;
> #if HIGH_BIT_DEPTH
> p.planeClipAndMax = planeClipAndMax_c;
> #endif
> diff -r 19f6ed165919 -r 99c608bd8853 source/common/primitives.h
> --- a/source/common/primitives.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/common/primitives.h Fri Dec 27 13:17:09 2019 +0530
> @@ -204,6 +204,7 @@
> typedef void (*sign_t)(int8_t *dst, const pixel *src1, const pixel *src2,
> const int endX);
> typedef void (*planecopy_cp_t) (const uint8_t* src, intptr_t srcStride,
> pixel* dst, intptr_t dstStride, int width, int height, int shift);
> typedef void (*planecopy_sp_t) (const uint16_t* src, intptr_t srcStride,
> pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t
> mask);
> +typedef void (*planecopy_pp_t) (const pixel* src, intptr_t srcStride,
> pixel* dst, intptr_t dstStride, int width, int height, int shift);
> typedef pixel (*planeClipAndMax_t)(pixel *src, intptr_t stride, int
> width, int height, uint64_t *outsum, const pixel minPix, const pixel
> maxPix);
>
> typedef void (*cutree_propagate_cost) (int* dst, const uint16_t*
> propagateIn, const int32_t* intraCosts, const uint16_t* interCosts, const
> int32_t* invQscales, const double* fpsFactor, int len);
> @@ -358,6 +359,7 @@
> planecopy_cp_t planecopy_cp;
> planecopy_sp_t planecopy_sp;
> planecopy_sp_t planecopy_sp_shl;
> + planecopy_pp_t planecopy_pp_shr;
> planeClipAndMax_t planeClipAndMax;
>
> weightp_sp_t weight_sp;
> diff -r 19f6ed165919 -r 99c608bd8853 source/encoder/analysis.cpp
> --- a/source/encoder/analysis.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/encoder/analysis.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -1313,14 +1313,22 @@
> if (md.bestMode && m_param->bEnableRecursionSkip &&
> !bCtuInfoCheck && !(m_param->bAnalysisType == AVC_INFO &&
> m_param->analysisReuseLevel == 7 && (m_modeFlag[0] || m_modeFlag[1])))
> {
> skipRecursion = md.bestMode->cu.isSkipped(0);
> - if (mightSplit && depth >= minDepth && !skipRecursion)
> + if (mightSplit && !skipRecursion)
> {
> - if (depth)
> - skipRecursion = recursionDepthCheck(parentCTU,
> cuGeom, *md.bestMode);
> - if (m_bHD && !skipRecursion && m_param->rdLevel == 2 &&
> md.fencYuv.m_size != MAX_CU_SIZE)
> - skipRecursion = complexityCheckCU(*md.bestMode);
> + if (depth >= minDepth && m_param->bEnableRecursionSkip ==
> RDCOST_BASED_RSKIP)
> + {
> + if (depth)
> + skipRecursion = recursionDepthCheck(parentCTU,
> cuGeom, *md.bestMode);
> + if (m_bHD && !skipRecursion && m_param->rdLevel == 2
> && md.fencYuv.m_size != MAX_CU_SIZE)
> + skipRecursion = complexityCheckCU(*md.bestMode);
> + }
> + else if (m_param->bEnableRecursionSkip ==
> EDGE_BASED_RSKIP)
> + {
> + skipRecursion = edgeRecursionSkip(parentCTU, depth);
> + }
> }
> }
> +
> if (m_param->bAnalysisType == AVC_INFO && md.bestMode &&
> cuGeom.numPartitions <= 16 && m_param->analysisReuseLevel == 7)
> skipRecursion = true;
> /* Step 2. Evaluate each of the 4 split sub-blocks in series */
> @@ -3543,6 +3551,33 @@
> return false;
> }
>
> +bool Analysis::edgeRecursionSkip(const CUData& ctu, int depth)
> +{
> + int cuLen = m_param->maxCUSize >> depth;
> + if (cuLen >= RSKIP2_MIN_CUSIZE)
> + {
> + uint8_t blockType = g_log2Size[cuLen] - 2;
> + int shift = g_log2Size[cuLen] * 2;
> + intptr_t stride = m_frame->m_fencPic->m_stride;
> + pixel* edgePic = m_frame->m_edgeBitPlane +
> m_frame->m_fencPic->m_lumaMarginY * m_frame->m_fencPic->m_stride +
> m_frame->m_fencPic->m_lumaMarginX;
> + intptr_t blockOffsetLuma = ctu.m_cuPelX + ctu.m_cuPelY * stride;
> + uint64_t sum_ss = primitives.cu[blockType].var(edgePic +
> blockOffsetLuma, stride);
> + uint32_t sum = (uint32_t)sum_ss;
> + uint32_t ss = (uint32_t)(sum_ss >> 32);
> + double pixelCount = pow(2.0, shift);
> + double cuEdgeVariance = (ss - (sum * sum / pixelCount)) /
> pixelCount;
> +
> + if (cuEdgeVariance > m_param->edgeThreshold)
> + return false;
> + else
> + return true;
> + }
> + else
> + {
> + return true;
> + }
> +}
> +
> uint32_t Analysis::calculateCUVariance(const CUData& ctu, const CUGeom&
> cuGeom)
> {
> uint32_t cuVariance = 0;
> @@ -3566,7 +3601,6 @@
> cnt++;
> }
> }
> -
> return cuVariance / cnt;
> }
>
> diff -r 19f6ed165919 -r 99c608bd8853 source/encoder/analysis.h
> --- a/source/encoder/analysis.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/encoder/analysis.h Fri Dec 27 13:17:09 2019 +0530
> @@ -36,6 +36,8 @@
> #include "entropy.h"
> #include "search.h"
>
> +#define RSKIP2_MIN_CUSIZE 32 /* CU size until which the cu edge variance
> will be computed. */
> +
> namespace X265_NS {
> // private namespace
>
> @@ -52,7 +54,7 @@
> splitRefs = 0;
> mvCost[0] = 0; // L0
> mvCost[1] = 0; // L1
> - sa8dCost = 0;
> + sa8dCost = 0;
> }
> };
>
> @@ -120,7 +122,6 @@
>
> Mode& compressCTU(CUData& ctu, Frame& frame, const CUGeom& cuGeom,
> const Entropy& initialContext);
> int32_t loadTUDepth(CUGeom cuGeom, CUData parentCTU);
> -
> protected:
> /* Analysis data for save/load mode, writes/reads data based on
> absPartIdx */
> x265_analysis_inter_data* m_reuseInterDataCTU;
> @@ -192,6 +193,7 @@
> uint32_t topSkipMinDepth(const CUData& parentCTU, const CUGeom&
> cuGeom);
> bool recursionDepthCheck(const CUData& parentCTU, const CUGeom&
> cuGeom, const Mode& bestMode);
> bool complexityCheckCU(const Mode& bestMode);
> + bool edgeRecursionSkip(const CUData& parentCTU, int depth);
>
> /* generate residual and recon pixels for an entire CTU recursively
> (RD0) */
> void encodeResidue(const CUData& parentCTU, const CUGeom& cuGeom);
> diff -r 19f6ed165919 -r 99c608bd8853 source/encoder/encoder.cpp
> --- a/source/encoder/encoder.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/encoder/encoder.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -1351,9 +1351,9 @@
> int32_t numBytes = m_param->sourceBitDepth > 8 ? 2 : 1;
> memset(m_edgePic, 0, bufSize * numBytes);
>
> - if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height,
> pic->width, false))
> - {
> - x265_log(m_param, X265_LOG_ERROR, "Failed edge computation!");
> + if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height,
> pic->width, false, 1))
> + {
> + x265_log(m_param, X265_LOG_ERROR, "Failed to compute edge!");
> return false;
> }
>
> @@ -1668,6 +1668,13 @@
> }
> }
> }
> + if (m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP &&
> m_param->bHistBasedSceneCut)
> + {
> + pixel* src = m_edgePic;
> + pixel* edgePic = inFrame->m_edgeBitPlane +
> inFrame->m_fencPic->m_lumaMarginY * inFrame->m_fencPic->m_stride +
> inFrame->m_fencPic->m_lumaMarginX;
> + primitives.planecopy_pp_shr(src,
> inFrame->m_fencPic->m_picWidth, edgePic, inFrame->m_fencPic->m_stride,
> + inFrame->m_fencPic->m_picWidth,
> inFrame->m_fencPic->m_picHeight, 0);
> + }
> }
> else
> {
> diff -r 19f6ed165919 -r 99c608bd8853 source/encoder/frameencoder.cpp
> --- a/source/encoder/frameencoder.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/encoder/frameencoder.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -130,7 +130,7 @@
> {
> rowSum += sliceGroupSizeAccu;
> m_sliceBaseRow[++sidx] = i;
> - }
> + }
> }
> X265_CHECK(sidx < m_param->maxSlices, "sliceID check failed!");
> m_sliceBaseRow[0] = 0;
> @@ -268,6 +268,20 @@
> curFrame->m_encData->m_jobProvider = this;
> curFrame->m_encData->m_slice->m_mref = m_mref;
>
> + if (!m_param->bHistBasedSceneCut && m_param->rc.aqMode !=
> X265_AQ_EDGE && m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
> + {
> + int height = curFrame->m_fencPic->m_picHeight;
> + int width = curFrame->m_fencPic->m_picWidth;
> + intptr_t stride = curFrame->m_fencPic->m_stride;
> + pixel* edgePic = curFrame->m_edgeBitPlane +
> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
> curFrame->m_fencPic->m_lumaMarginX;
> +
> + if (!computeEdge(edgePic, curFrame->m_fencPic->m_picOrg[0], NULL,
> stride, height, width, false, 1))
> + {
> + x265_log(m_param, X265_LOG_ERROR, " Failed to compute edge
> !");
> + return false;
> + }
> + }
> +
> if (!m_cuGeoms)
> {
> if (!initializeGeoms())
> diff -r 19f6ed165919 -r 99c608bd8853 source/encoder/slicetype.cpp
> --- a/source/encoder/slicetype.cpp Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/encoder/slicetype.cpp Fri Dec 27 13:17:09 2019 +0530
> @@ -87,7 +87,7 @@
>
> namespace X265_NS {
>
> -bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta,
> intptr_t stride, int height, int width, bool bcalcTheta)
> +bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta,
> intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel)
> {
> intptr_t rowOne = 0, rowTwo = 0, rowThree = 0, colOne = 0, colTwo =
> 0, colThree = 0;
> intptr_t middle = 0, topLeft = 0, topRight = 0, bottomLeft = 0,
> bottomRight = 0;
> @@ -141,7 +141,7 @@
> theta = 180 + theta;
> edgeTheta[middle] = (pixel)theta;
> }
> - edgePic[middle] = (pixel)(gradientMagnitude >=
> edgeThreshold ? edgeThreshold : blackPixel);
> + edgePic[middle] = (pixel)(gradientMagnitude >=
> EDGE_THRESHOLD ? whitePixel : blackPixel);
> }
> }
> return true;
> @@ -519,6 +519,14 @@
> if (param->rc.aqMode == X265_AQ_EDGE)
> edgeFilter(curFrame, param);
>
> + if (param->rc.aqMode == X265_AQ_EDGE &&
> !param->bHistBasedSceneCut && param->bEnableRecursionSkip ==
> EDGE_BASED_RSKIP)
> + {
> + pixel* src = curFrame->m_edgePic +
> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
> curFrame->m_fencPic->m_lumaMarginX;
> + pixel* dst = curFrame->m_edgeBitPlane +
> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
> curFrame->m_fencPic->m_lumaMarginX;
> + primitives.planecopy_pp_shr(src,
> curFrame->m_fencPic->m_stride, dst,
> + curFrame->m_fencPic->m_stride,
> curFrame->m_fencPic->m_picWidth, curFrame->m_fencPic->m_picHeight,
> SHIFT_TO_BITPLANE);
> + }
> +
> if (param->rc.aqMode == X265_AQ_AUTO_VARIANCE ||
> param->rc.aqMode == X265_AQ_AUTO_VARIANCE_BIASED || param->rc.aqMode ==
> X265_AQ_EDGE)
> {
> double bit_depth_correction = 1.f / (1 << (2 *
> (X265_DEPTH - 8)));
> diff -r 19f6ed165919 -r 99c608bd8853 source/encoder/slicetype.h
> --- a/source/encoder/slicetype.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/encoder/slicetype.h Fri Dec 27 13:17:09 2019 +0530
> @@ -44,9 +44,9 @@
> #define EDGE_INCLINATION 45
>
> #if HIGH_BIT_DEPTH
> -#define edgeThreshold 1023.0
> +#define EDGE_THRESHOLD 1023.0
> #else
> -#define edgeThreshold 255.0
> +#define EDGE_THRESHOLD 255.0
> #endif
> #define PI 3.14159265
>
> @@ -101,7 +101,7 @@
> protected:
>
> uint32_t acEnergyCu(Frame* curFrame, uint32_t blockX, uint32_t
> blockY, int csp, uint32_t qgSize);
> - uint32_t edgeDensityCu(Frame*curFrame, uint32_t &avgAngle, uint32_t
> blockX, uint32_t blockY, uint32_t qgSize);
> + uint32_t edgeDensityCu(Frame* curFrame, uint32_t &avgAngle, uint32_t
> blockX, uint32_t blockY, uint32_t qgSize);
> uint32_t lumaSumCu(Frame* curFrame, uint32_t blockX, uint32_t blockY,
> uint32_t qgSize);
> uint32_t weightCostLuma(Lowres& fenc, Lowres& ref, WeightParam& wp);
> bool allocWeightedRef(Lowres& fenc);
> @@ -265,7 +265,6 @@
> CostEstimateGroup& operator=(const CostEstimateGroup&);
> };
>
> -bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta,
> intptr_t stride, int height, int width, bool bcalcTheta);
> -
> +bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta,
> intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel =
> EDGE_THRESHOLD);
> }
> #endif // ifndef X265_SLICETYPE_H
> diff -r 19f6ed165919 -r 99c608bd8853 source/test/regression-tests.txt
> --- a/source/test/regression-tests.txt Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/test/regression-tests.txt Fri Dec 27 13:17:09 2019 +0530
> @@ -161,6 +161,8 @@
> Island_960x540_24.yuv,--no-cutree --aq-mode 0 --bitrate 6000
> --scenecut-aware-qp
> sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut
> --hist-threshold 0.02 --frame-dup --dup-threshold 60 --hrd --bitrate 10000
> --vbv-bufsize 15000 --vbv-maxrate 12000
> sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut
> --hist-threshold 0.02
> +crowd_run_1080p50.yuv, --rskip 2 --edge-threshold 5 --hist-scenecut
> --hist-threshold 0.1 --aq-mode 4
> +crowd_run_1080p50.yuv, --preset slow --rskip 2 --edge-threshold 5
> --hist-scenecut --hist-threshold 0.1 --aq-mode 4
>
> # Main12 intraCost overflow bug test
> 720p50_parkrun_ter.y4m,--preset medium
> diff -r 19f6ed165919 -r 99c608bd8853 source/x265.h
> --- a/source/x265.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/x265.h Fri Dec 27 13:17:09 2019 +0530
> @@ -1859,6 +1859,9 @@
>
> /* Enable HME search ranges for L0, L1 and L2 respectively. */
> int hmeRange[3];
> +
> + /* Edge variance threshold for quad tree establishment. */
> + double edgeThreshold;
> } x265_param;
>
> /* x265_param_alloc:
> diff -r 19f6ed165919 -r 99c608bd8853 source/x265cli.h
> --- a/source/x265cli.h Mon Dec 30 11:58:44 2019 +0530
> +++ b/source/x265cli.h Fri Dec 27 13:17:09 2019 +0530
> @@ -105,8 +105,8 @@
> { "amp", no_argument, NULL, 0 },
> { "no-early-skip", no_argument, NULL, 0 },
> { "early-skip", no_argument, NULL, 0 },
> - { "no-rskip", no_argument, NULL, 0 },
> - { "rskip", no_argument, NULL, 0 },
> + { "rskip", required_argument, NULL, 0 },
> + { "edge-threshold", required_argument, NULL, 0 },
> { "no-fast-cbf", no_argument, NULL, 0 },
> { "fast-cbf", no_argument, NULL, 0 },
> { "no-tskip", no_argument, NULL, 0 },
> @@ -451,7 +451,8 @@
> H0(" --[no-]ssim-rd Enable ssim rate distortion
> optimization, 0 to disable. Default %s\n", OPT(param->bSsimRd));
> H0(" --[no-]rd-refine Enable QP based RD refinement
> for rd levels 5 and 6. Default %s\n", OPT(param->bEnableRdRefine));
> H0(" --[no-]early-skip Enable early SKIP detection.
> Default %s\n", OPT(param->bEnableEarlySkip));
> - H0(" --[no-]rskip Enable early exit from
> recursion. Default %s\n", OPT(param->bEnableRecursionSkip));
> + H0(" --rskip <mode> Enable or disable early exit
> from recursion. Mode 0: Disabled. Mode 1: exit using rdcost. Mode 2: exit
> using edge density. Default %s\n", OPT(param->bEnableRecursionSkip));
> + H1(" --edge-threshold Threshold in terms of percentage
> for edge density in CUs to terminate the recursion depth. Applicable only
> for rskip mode 2. Default %s\n", OPT(param->edgeThreshold));
> H1(" --[no-]tskip-fast Enable fast intra transform
> skipping. Default %s\n", OPT(param->bEnableTSkipFast));
> H1(" --[no-]splitrd-skip Enable skipping split RD
> analysis when sum of split CU rdCost larger than one split CU rdCost for
> Intra CU. Default %s\n", OPT(param->bEnableSplitRdSkip));
> H1(" --nr-intra <integer> An integer value in range of 0
> to 2000, which denotes strength of noise reduction in intra CUs. Default
> 0\n");
>
--
*With Regards,*
*Srikanth Kurapati.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/x265-devel/attachments/20200107/94102c60/attachment-0001.html>
More information about the x265-devel
mailing list