[x265] [PATCH 1 of 2] hdr-opt: Replace --hdr-opt with --hdr10-opt
Aruna Matheswaran
aruna at multicorewareinc.com
Wed Jan 8 13:06:50 CET 2020
Pushed to default.
On Tue, Jan 7, 2020 at 5:44 PM Aruna Matheswaran <aruna at multicorewareinc.com>
wrote:
> # HG changeset patch
> # User Aruna Matheswaran <aruna at multicorewareinc.com>
> # Date 1578287653 -19800
> # Mon Jan 06 10:44:13 2020 +0530
> # Node ID 542653f9c733c0b41d33e204497bed1126455d17
> # Parent b82891180e7e9e13545791f739837d977d472d43
> hdr-opt: Replace --hdr-opt with --hdr10-opt
>
> This patch deprecates the existing option '--hdr-opt' as the name sounds
> generic
> even though the feature does QP optimizations only for HDR10 content and
> introduces '--hdr10-opt' as an alternate.
>
> This patch also fixes nits in a warning message.
>
> Note: '--hdr-opt' will be removed in the upcoming major release of x265.
>
> diff -r b82891180e7e -r 542653f9c733 doc/reST/cli.rst
> --- a/doc/reST/cli.rst Mon Jan 06 23:08:36 2020 +0530
> +++ b/doc/reST/cli.rst Mon Jan 06 10:44:13 2020 +0530
> @@ -2259,11 +2259,13 @@
> specified. Useful when there is a desire to signal 0 values for
> max-cll
> and max-fall. Default disabled.
>
> -.. option:: --hdr-opt, --no-hdr-opt
> -
> - Add luma and chroma offsets for HDR/WCG content.
> - Input video should be 10 bit 4:2:0. Applicable for HDR content. It
> is recommended
> - that AQ-mode be enabled along with this feature. Default disabled.
> +.. option:: --hdr10-opt, --no-hdr10-opt
> +
> + Enable block-level luma and chroma QP optimization for HDR10
> content
> + as suggested in ITU-T H-series Recommendations – Supplement 15.
> + Source video should have HDR10 characteristics such as 10-bit
> depth 4:2:0
> + with Bt.2020 color primaries and SMPTE ST.2084 transfer
> characteristics.
> + It is recommended that AQ-mode be enabled along with this feature.
> Default disabled.
>
> .. option:: --dhdr10-info <filename>
>
> diff -r b82891180e7e -r 542653f9c733 source/CMakeLists.txt
> --- a/source/CMakeLists.txt Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/CMakeLists.txt Mon Jan 06 10:44:13 2020 +0530
> @@ -29,7 +29,7 @@
> option(STATIC_LINK_CRT "Statically link C runtime for release builds" OFF)
> mark_as_advanced(FPROFILE_USE FPROFILE_GENERATE NATIVE_BUILD)
> # X265_BUILD must be incremented each time the public API is changed
> -set(X265_BUILD 186)
> +set(X265_BUILD 187)
> configure_file("${PROJECT_SOURCE_DIR}/x265.def.in"
> "${PROJECT_BINARY_DIR}/x265.def")
> configure_file("${PROJECT_SOURCE_DIR}/x265_config.h.in"
> diff -r b82891180e7e -r 542653f9c733 source/common/param.cpp
> --- a/source/common/param.cpp Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/common/param.cpp Mon Jan 06 10:44:13 2020 +0530
> @@ -322,7 +322,8 @@
> param->bOptRefListLengthPPS = 0;
> param->bOptCUDeltaQP = 0;
> param->bAQMotion = 0;
> - param->bHDROpt = 0;
> + param->bHDROpt = 0; /*DEPRECATED*/
> + param->bHDR10Opt = 0;
> param->analysisReuseLevel = 0; /*DEPRECATED*/
> param->analysisSaveReuseLevel = 0;
> param->analysisLoadReuseLevel = 0;
> @@ -1244,7 +1245,8 @@
> }
> }
> OPT("hdr") p->bEmitHDRSEI = atobool(value);
> - OPT("hdr-opt") p->bHDROpt = atobool(value);
> + OPT("hdr-opt") p->bHDR10Opt = atobool(value); /*DEPRECATED*/
> + OPT("hdr10-opt") p->bHDR10Opt = atobool(value);
> OPT("limit-sao") p->bLimitSAO = atobool(value);
> OPT("dhdr10-info") p->toneMapFile = strdup(value);
> OPT("dhdr10-opt") p->bDhdr10opt = atobool(value);
> @@ -2169,7 +2171,7 @@
> BOOL(p->bOptCUDeltaQP, "opt-cu-delta-qp");
> BOOL(p->bAQMotion, "aq-motion");
> BOOL(p->bEmitHDRSEI, "hdr");
> - BOOL(p->bHDROpt, "hdr-opt");
> + BOOL(p->bHDR10Opt, "hdr10-opt");
> BOOL(p->bDhdr10opt, "dhdr10-opt");
> BOOL(p->bEmitIDRRecoverySEI, "idr-recovery-sei");
> if (p->analysisSave)
> @@ -2495,7 +2497,8 @@
> dst->dynamicRd = src->dynamicRd;
> dst->bEmitHDRSEI = src->bEmitHDRSEI;
> dst->bEmitHRDSEI = src->bEmitHRDSEI;
> - dst->bHDROpt = src->bHDROpt;
> + dst->bHDROpt = src->bHDROpt; /*DEPRECATED*/
> + dst->bHDR10Opt = src->bHDR10Opt;
> dst->analysisReuseLevel = src->analysisReuseLevel;
> dst->analysisSaveReuseLevel = src->analysisSaveReuseLevel;
> dst->analysisLoadReuseLevel = src->analysisLoadReuseLevel;
> diff -r b82891180e7e -r 542653f9c733 source/encoder/encoder.cpp
> --- a/source/encoder/encoder.cpp Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/encoder/encoder.cpp Mon Jan 06 10:44:13 2020 +0530
> @@ -3281,7 +3281,7 @@
>
> pps->chromaQpOffset[0] = m_param->cbQpOffset;
> pps->chromaQpOffset[1] = m_param->crQpOffset;
> - pps->pps_slice_chroma_qp_offsets_present_flag = m_param->bHDROpt;
> + pps->pps_slice_chroma_qp_offsets_present_flag = m_param->bHDR10Opt;
>
> pps->bConstrainedIntraPred = m_param->bEnableConstrainedIntra;
> pps->bUseWeightPred = m_param->bEnableWeightedPred;
> @@ -3747,7 +3747,7 @@
>
> if (!p->rc.bStatWrite && !p->rc.bStatRead &&
> (p->analysisMultiPassRefine || p->analysisMultiPassDistortion))
> {
> - x265_log(p, X265_LOG_WARNING, "analysis-multi-pass/distortion is
> enabled only when rc multi pass is enabled. Disabling
> multi-pass-opt-analysis and multi-pass-opt-distortion");
> + x265_log(p, X265_LOG_WARNING, "analysis-multi-pass/distortion is
> enabled only when rc multi pass is enabled. Disabling
> multi-pass-opt-analysis and multi-pass-opt-distortion\n");
> p->analysisMultiPassRefine = 0;
> p->analysisMultiPassDistortion = 0;
> }
> @@ -4072,21 +4072,21 @@
> x265_log(p, X265_LOG_WARNING, "maxSlices can not be more than
> min(rows, MAX_NAL_UNITS-1), force set to %d\n", slicesLimit);
> p->maxSlices = slicesLimit;
> }
> - if (p->bHDROpt)
> + if (p->bHDR10Opt)
> {
> if (p->internalCsp != X265_CSP_I420 || p->internalBitDepth != 10
> || p->vui.colorPrimaries != 9 ||
> p->vui.transferCharacteristics != 16 || p->vui.matrixCoeffs
> != 9)
> {
> - x265_log(p, X265_LOG_ERROR, "Recommended Settings for HDR:
> colour primaries should be BT.2020,\n"
> + x265_log(p, X265_LOG_ERROR, "Recommended Settings for
> HDR10-opt: colour primaries should be BT.2020,\n"
> "
> transfer characteristics should be SMPTE ST.2084,\n"
> "
> matrix coeffs should be BT.2020,\n"
> "
> the input video should be 10 bit 4:2:0\n"
> - "
> Disabling offset tuning for HDR videos\n");
> - p->bHDROpt = 0;
> + "
> Disabling hdr10-opt.\n");
> + p->bHDR10Opt = 0;
> }
> }
>
> - if (m_param->toneMapFile || p->bHDROpt || p->bEmitHDRSEI)
> + if (m_param->toneMapFile || p->bHDR10Opt || p->bEmitHDRSEI)
> {
> if (!p->bRepeatHeaders)
> {
> diff -r b82891180e7e -r 542653f9c733 source/encoder/frameencoder.cpp
> --- a/source/encoder/frameencoder.cpp Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/encoder/frameencoder.cpp Mon Jan 06 10:44:13 2020 +0530
> @@ -591,7 +591,7 @@
>
> /* Clip slice QP to 0-51 spec range before encoding */
> slice->m_sliceQp = x265_clip3(-QP_BD_OFFSET, QP_MAX_SPEC, qp);
> - if (m_param->bHDROpt)
> + if (m_param->bHDR10Opt)
> {
> int qpCb = x265_clip3(-12, 0, (int)floor((m_top->m_cB * ((-.46) *
> qp + 9.26)) + 0.5 ));
> int qpCr = x265_clip3(-12, 0, (int)floor((m_top->m_cR * ((-.46) *
> qp + 9.26)) + 0.5 ));
> diff -r b82891180e7e -r 542653f9c733 source/encoder/slicetype.cpp
> --- a/source/encoder/slicetype.cpp Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/encoder/slicetype.cpp Mon Jan 06 10:44:13 2020 +0530
> @@ -593,7 +593,7 @@
> qp_adj = strength *
> (X265_LOG2(X265_MAX(energy, 1)) - (modeOneConst + 2 * (X265_DEPTH - 8)));
> }
>
> - if (param->bHDROpt)
> + if (param->bHDR10Opt)
> {
> uint32_t sum = lumaSumCu(curFrame, blockX,
> blockY, param->rc.qgSize);
> uint32_t lumaAvg = sum / (loopIncr *
> loopIncr);
> diff -r b82891180e7e -r 542653f9c733 source/x265.h
> --- a/source/x265.h Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/x265.h Mon Jan 06 10:44:13 2020 +0530
> @@ -1653,7 +1653,7 @@
> int bEmitHDRSEI;
>
> /* Enable luma and chroma offsets for HDR/WCG content.
> - * Default is disabled */
> + * Default is disabled. Now deprecated.*/
> int bHDROpt;
>
> /* A value between 1 and 10 (both inclusive) determines the level of
> @@ -1893,6 +1893,9 @@
> * from the corresponding analysis-save. */
>
> int confWinBottomOffset;
> +
> + /* Block-level QP optimization for HDR10 content. Default is
> disabled.*/
> + int bHDR10Opt;
> } x265_param;
>
> /* x265_param_alloc:
> diff -r b82891180e7e -r 542653f9c733 source/x265cli.h
> --- a/source/x265cli.h Mon Jan 06 23:08:36 2020 +0530
> +++ b/source/x265cli.h Mon Jan 06 10:44:13 2020 +0530
> @@ -301,6 +301,8 @@
> { "no-hdr", no_argument, NULL, 0 },
> { "hdr-opt", no_argument, NULL, 0 },
> { "no-hdr-opt", no_argument, NULL, 0 },
> + { "hdr10-opt", no_argument, NULL, 0 },
> + { "no-hdr10-opt", no_argument, NULL, 0 },
> { "limit-sao", no_argument, NULL, 0 },
> { "no-limit-sao", no_argument, NULL, 0 },
> { "dhdr10-info", required_argument, NULL, 0 },
> @@ -635,7 +637,8 @@
> H0(" --max-cll <string> Specify content light level info
> SEI as \"cll,fall\" (HDR).\n");
> H0(" --[no-]cll Emit content light level info
> SEI. Default %s\n", OPT(param->bEmitCLL));
> H0(" --[no-]hdr Control dumping of HDR SEI
> packet. If max-cll or master-display has non-zero values, this is enabled.
> Default %s\n", OPT(param->bEmitHDRSEI));
> - H0(" --[no-]hdr-opt Add luma and chroma offsets for
> HDR/WCG content. Default %s\n", OPT(param->bHDROpt));
> + H0(" --[no-]hdr-opt Add luma and chroma offsets for
> HDR/WCG content. Default %s. Now deprecated.\n", OPT(param->bHDROpt));
> + H0(" --[no-]HDR10-opt Block-level QP optimization for
> HDR10 content. Default %s.\n", OPT(param->bHDR10Opt));
> H0(" --min-luma <integer> Minimum luma plane value of
> input source picture\n");
> H0(" --max-luma <integer> Maximum luma plane value of
> input source picture\n");
> H0("\nBitstream options:\n");
>
--
Regards,
*Aruna Matheswaran,*
Video Codec Engineer,
Media & AI analytics BU,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/x265-devel/attachments/20200108/75897cd3/attachment-0001.html>
More information about the x265-devel
mailing list