[x265] [PATCH] Edge Aware Quad Tree Establishment
Srikanth Kurapati
srikanth.kurapati at multicorewareinc.com
Wed Jan 22 13:31:35 CET 2020
This patch provided rskip=2 for rd levels 0 to 4. For rd levels 5 and 6 it
will be provided through a subsequent patch.
On Wed, Jan 22, 2020 at 5:53 PM Alex Giladi <alex.giladi at gmail.com> wrote:
> Why would rskip=2 not work on rd > 4?
> Is there a technical reason, or is there an implicit assumption that the
> users won't want to use rskip at rd > 4?
>
> On Wed, Jan 22, 2020, 04:00 Kavitha Sampath <kavitha at multicorewareinc.com>
> wrote:
>
>>
>>
>> On Tue, Jan 21, 2020 at 11:32 AM <srikanth.kurapati at multicorewareinc.com>
>> wrote:
>>
>>> # HG changeset patch
>>> # User Srikanth Kurapati
>>> # Date 1579584229 -19800
>>> # Tue Jan 21 10:53:49 2020 +0530
>>> # Node ID e0e0270ead4189a545821b00011c47d61e6b817a
>>> # Parent acc5d16999e2faf6e75ecc1df9a01c1953ebaf8c
>>> Edge Aware Quad Tree Establishment.
>>>
>>> This patch does the following:
>>> 1. Terminates recursion using edge information.
>>> 2. Adds modes for "--rskip". Modes 0,1 for current usage and 2 for edge
>>> based
>>> rskip for RD levels 0 to 4.
>>> 3. Adds option "edge-threshold" to decide recursion skip using CU edge
>>> density.
>>> 4. Re uses edge information when already available in encoder.
>>>
>>> diff -r acc5d16999e2 -r e0e0270ead41 doc/reST/cli.rst
>>> --- a/doc/reST/cli.rst Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/doc/reST/cli.rst Tue Jan 21 10:53:49 2020 +0530
>>> @@ -842,15 +842,20 @@
>>> Measure 2Nx2N merge candidates first; if no residual is found,
>>> additional modes at that depth are not analysed. Default disabled
>>>
>>> -.. option:: --rskip, --no-rskip
>>> -
>>> - This option determines early exit from CU depth recursion. When
>>> a skip CU is
>>> - found, additional heuristics (depending on rd-level) are used to
>>> decide whether
>>> - to terminate recursion. In rdlevels 5 and 6, comparison with
>>> inter2Nx2N is used,
>>> - while at rdlevels 4 and neighbour costs are used to skip
>>> recursion.
>>> - Provides minimal quality degradation at good performance gains
>>> when enabled.
>>> -
>>> - Default: enabled, disabled for :option:`--tune grain`
>>> +.. option:: --rskip <0|1|2>
>>> +
>>> + This option determines early exit from CU depth recursion in
>>> modes 1 and 2. When a skip CU is
>>> + found, additional heuristics (depending on RD level and rskip
>>> mode) are used to decide whether
>>> + to terminate recursion. In RD levels 5 and 6, comparison with
>>> inter2Nx2N is used,
>>> + while at RD levels 4 and below, neighbour costs are used to skip
>>> recursion in mode 1, and CU edge density in mode 2.
>>> + Provides minimal quality degradation at good performance gains
>>> for non-zero modes. :option:`--r-skip mode 0` means disabled.
>>> +
>>> + Default: 1, disabled when :option:`--tune grain` is used.
>>> +
>>> +.. option:: --edge-threshold <0..100>
>>> +
>>> + Denotes the minimum expected edge-density percentage within the
>>> CU, below which the recursion is skipped.
>>> + Default: 5, requires :option:`--rskip mode 2` to be enabled.
>>>
>> .. option:: --splitrd-skip, --no-splitrd-skip
>>>
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/CMakeLists.txt
>>> --- a/source/CMakeLists.txt Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/CMakeLists.txt Tue Jan 21 10:53:49 2020 +0530
>>> @@ -29,7 +29,7 @@
>>> option(STATIC_LINK_CRT "Statically link C runtime for release builds"
>>> OFF)
>>> mark_as_advanced(FPROFILE_USE FPROFILE_GENERATE NATIVE_BUILD)
>>> # X265_BUILD must be incremented each time the public API is changed
>>> -set(X265_BUILD 188)
>>> +set(X265_BUILD 189)
>>> configure_file("${PROJECT_SOURCE_DIR}/x265.def.in"
>>> "${PROJECT_BINARY_DIR}/x265.def")
>>> configure_file("${PROJECT_SOURCE_DIR}/x265_config.h.in"
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/common/common.h
>>> --- a/source/common/common.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/common/common.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -129,6 +129,7 @@
>>> typedef uint64_t sum2_t;
>>> typedef uint64_t pixel4;
>>> typedef int64_t ssum2_t;
>>> +#define SHIFT_TO_BITPLANE 9
>>> #define HISTOGRAM_BINS 1024
>>> #define SHIFT 1
>>> #else
>>> @@ -137,6 +138,7 @@
>>> typedef uint32_t sum2_t;
>>> typedef uint32_t pixel4;
>>> typedef int32_t ssum2_t; // Signed sum
>>> +#define SHIFT_TO_BITPLANE 7
>>> #define HISTOGRAM_BINS 256
>>> #define SHIFT 0
>>> #endif // if HIGH_BIT_DEPTH
>>> @@ -272,6 +274,9 @@
>>> #define MAX_TR_SIZE (1 << MAX_LOG2_TR_SIZE)
>>> #define MAX_TS_SIZE (1 << MAX_LOG2_TS_SIZE)
>>>
>>> +#define RDCOST_BASED_RSKIP 1
>>> +#define EDGE_BASED_RSKIP 2
>>> +
>>> #define COEF_REMAIN_BIN_REDUCTION 3 // indicates the level at which
>>> the VLC
>>> // transitions from Golomb-Rice
>>> to TU+EG(k)
>>>
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/common/frame.cpp
>>> --- a/source/common/frame.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/common/frame.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -61,6 +61,7 @@
>>> m_edgePic = NULL;
>>> m_gaussianPic = NULL;
>>> m_thetaPic = NULL;
>>> + m_edgeBitPlane = NULL;
>>> }
>>>
>>> bool Frame::create(x265_param *param, float* quantOffsets)
>>> @@ -115,6 +116,18 @@
>>> m_thetaPic = X265_MALLOC(pixel, m_stride * (maxHeight +
>>> (m_lumaMarginY * 2)));
>>> }
>>>
>>> + if (param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + {
>>> + uint32_t numCuInWidth = (param->sourceWidth + param->maxCUSize
>>> - 1) / param->maxCUSize;
>>> + uint32_t numCuInHeight = (param->sourceHeight +
>>> param->maxCUSize - 1) / param->maxCUSize;
>>> + uint32_t lumaMarginX = param->maxCUSize + 32;
>>> + uint32_t lumaMarginY = param->maxCUSize + 16;
>>> + uint32_t stride = (numCuInWidth * param->maxCUSize) +
>>> (lumaMarginX << 1);
>>> + uint32_t maxHeight = numCuInHeight * param->maxCUSize;
>>> + m_bitPlaneSize = stride * (maxHeight + (lumaMarginY * 2));
>>> + CHECKED_MALLOC_ZERO(m_edgeBitPlane, pixel, m_bitPlaneSize);
>>> + }
>>> +
>>> if (m_fencPic->create(param, !!m_param->bCopyPicToFrame) &&
>>> m_lowres.create(param, m_fencPic, param->rc.qgSize))
>>> {
>>> X265_CHECK((m_reconColCount == NULL), "m_reconColCount was
>>> initialized");
>>> @@ -267,4 +280,9 @@
>>> X265_FREE(m_gaussianPic);
>>> X265_FREE(m_thetaPic);
>>> }
>>> +
>>> + if (m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + {
>>> + X265_FREE(m_edgeBitPlane);
>>> + }
>>> }
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/common/frame.h
>>> --- a/source/common/frame.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/common/frame.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -137,6 +137,8 @@
>>> pixel* m_gaussianPic;
>>> pixel* m_thetaPic;
>>>
>>> + pixel* m_edgeBitPlane;
>>> + uint32_t m_bitPlaneSize;
>>> Frame();
>>>
>>> bool create(x265_param *param, float* quantOffsets);
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/common/param.cpp
>>> --- a/source/common/param.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/common/param.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -199,6 +199,7 @@
>>> param->bEnableWeightedBiPred = 0;
>>> param->bEnableEarlySkip = 1;
>>> param->bEnableRecursionSkip = 1;
>>> + param->edgeThreshold = 0.05f;
>>>
>> [KS] Are we going to have the same default threshold for both flows -
>> (a)histogram based scenecut =1 && aqmode=0 (b) histogram based scenecut =0
>> && aqmode=1
>> When the variance of the two flows can vary, shouldn't the thresholds
>> vary?
>> [KS] The docs isn't giving much guidance to users on how to set the
>> threshold for each of the flows you are handling
>>
>>> param->bEnableAMP = 0;
>>> param->bEnableRectInter = 0;
>>> param->rdLevel = 3;
>>> @@ -702,8 +703,9 @@
>>> OPT("ref") p->maxNumReferences = atoi(value);
>>> OPT("fast-intra") p->bEnableFastIntra = atobool(value);
>>> OPT("early-skip") p->bEnableEarlySkip = atobool(value);
>>> - OPT("rskip") p->bEnableRecursionSkip = atobool(value);
>>> - OPT("me")p->searchMethod = parseName(value, x265_motion_est_names,
>>> bError);
>>> + OPT("rskip") p->bEnableRecursionSkip = atoi(value);
>>> + OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0f;
>>> + OPT("me") p->searchMethod = parseName(value, x265_motion_est_names,
>>> bError);
>>> OPT("subme") p->subpelRefine = atoi(value);
>>> OPT("merange") p->searchRange = atoi(value);
>>> OPT("rect") p->bEnableRectInter = atobool(value);
>>> @@ -919,7 +921,7 @@
>>> OPT("max-merge") p->maxNumMergeCand = (uint32_t)atoi(value);
>>> OPT("temporal-mvp") p->bEnableTemporalMvp = atobool(value);
>>> OPT("early-skip") p->bEnableEarlySkip = atobool(value);
>>> - OPT("rskip") p->bEnableRecursionSkip = atobool(value);
>>> + OPT("rskip") p->bEnableRecursionSkip = atoi(value);
>>> OPT("rdpenalty") p->rdPenalty = atoi(value);
>>> OPT("tskip") p->bEnableTransformSkip = atobool(value);
>>> OPT("no-tskip-fast") p->bEnableTSkipFast = atobool(value);
>>> @@ -1221,6 +1223,7 @@
>>> }
>>> }
>>> OPT("hist-threshold") p->edgeTransitionThreshold = atof(value);
>>> + OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0f;
>>> OPT("lookahead-threads") p->lookaheadThreads = atoi(value);
>>> OPT("opt-cu-delta-qp") p->bOptCUDeltaQP = atobool(value);
>>> OPT("multi-pass-opt-analysis") p->analysisMultiPassRefine =
>>> atobool(value);
>>> @@ -1596,9 +1599,16 @@
>>> CHECK(param->rdLevel < 1 || param->rdLevel > 6,
>>> "RD Level is out of range");
>>> CHECK(param->rdoqLevel < 0 || param->rdoqLevel > 2,
>>> - "RDOQ Level is out of range");
>>> + "RDOQ Level is out of range");
>>> CHECK(param->dynamicRd < 0 || param->dynamicRd >
>>> x265_ADAPT_RD_STRENGTH,
>>> - "Dynamic RD strength must be between 0 and 4");
>>> + "Dynamic RD strength must be between 0 and 4");
>>> + CHECK(param->bEnableRecursionSkip > 2 ||
>>> param->bEnableRecursionSkip < 0,
>>> + "Invalid Recursion skip mode. Valid modes 0,1,2");
>>> + if (param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + {
>>> + CHECK(param->edgeThreshold < 0.0f || param->edgeThreshold >
>>> 1.0f,
>>> + "Minimum edge density percentage for a CU should be an
>>> integer between 0 to 100");
>>> + }
>>> CHECK(param->bframes && param->bframes >= param->lookaheadDepth &&
>>> !param->rc.bStatRead,
>>> "Lookahead depth must be greater than the max consecutive
>>> bframe count");
>>> CHECK(param->bframes < 0,
>>> @@ -1908,7 +1918,9 @@
>>> TOOLVAL(param->psyRdoq, "psy-rdoq=%.2lf");
>>> TOOLOPT(param->bEnableRdRefine, "rd-refine");
>>> TOOLOPT(param->bEnableEarlySkip, "early-skip");
>>> - TOOLOPT(param->bEnableRecursionSkip, "rskip");
>>> + TOOLVAL(param->bEnableRecursionSkip, "rskip mode=%d");
>>> + if (param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + TOOLVAL(param->edgeThreshold, "rskip-threshold=%.2f");
>>> TOOLOPT(param->bEnableSplitRdSkip, "splitrd-skip");
>>> TOOLVAL(param->noiseReductionIntra, "nr-intra=%d");
>>> TOOLVAL(param->noiseReductionInter, "nr-inter=%d");
>>> @@ -2067,6 +2079,9 @@
>>> s += sprintf(s, " selective-sao=%d", p->selectiveSAO);
>>> BOOL(p->bEnableEarlySkip, "early-skip");
>>> BOOL(p->bEnableRecursionSkip, "rskip");
>>> + if (p->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + s += sprintf(s, " edge-threshold=%f", p->edgeThreshold);
>>> +
>>> BOOL(p->bEnableFastIntra, "fast-intra");
>>> BOOL(p->bEnableTSkipFast, "tskip-fast");
>>> BOOL(p->bCULossless, "cu-lossless");
>>> @@ -2374,6 +2389,7 @@
>>> dst->rdLevel = src->rdLevel;
>>> dst->bEnableEarlySkip = src->bEnableEarlySkip;
>>> dst->bEnableRecursionSkip = src->bEnableRecursionSkip;
>>> + dst->edgeThreshold = src->edgeThreshold;
>>> dst->bEnableFastIntra = src->bEnableFastIntra;
>>> dst->bEnableTSkipFast = src->bEnableTSkipFast;
>>> dst->bCULossless = src->bCULossless;
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/common/pixel.cpp
>>> --- a/source/common/pixel.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/common/pixel.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -876,6 +876,18 @@
>>> }
>>> }
>>>
>>> +static void planecopy_pp_shr_c(const pixel* src, intptr_t srcStride,
>>> pixel* dst, intptr_t dstStride, int width, int height, int shift)
>>> +{
>>> + for (int r = 0; r < height; r++)
>>> + {
>>> + for (int c = 0; c < width; c++)
>>> + dst[c] = (pixel)((src[c] >> shift));
>>> +
>>> + dst += dstStride;
>>> + src += srcStride;
>>> + }
>>> +}
>>> +
>>> static void planecopy_sp_shl_c(const uint16_t* src, intptr_t srcStride,
>>> pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t
>>> mask)
>>> {
>>> for (int r = 0; r < height; r++)
>>> @@ -1316,6 +1328,7 @@
>>> p.planecopy_cp = planecopy_cp_c;
>>> p.planecopy_sp = planecopy_sp_c;
>>> p.planecopy_sp_shl = planecopy_sp_shl_c;
>>> + p.planecopy_pp_shr = planecopy_pp_shr_c;
>>> #if HIGH_BIT_DEPTH
>>> p.planeClipAndMax = planeClipAndMax_c;
>>> #endif
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/common/primitives.h
>>> --- a/source/common/primitives.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/common/primitives.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -204,6 +204,7 @@
>>> typedef void (*sign_t)(int8_t *dst, const pixel *src1, const pixel
>>> *src2, const int endX);
>>> typedef void (*planecopy_cp_t) (const uint8_t* src, intptr_t srcStride,
>>> pixel* dst, intptr_t dstStride, int width, int height, int shift);
>>> typedef void (*planecopy_sp_t) (const uint16_t* src, intptr_t
>>> srcStride, pixel* dst, intptr_t dstStride, int width, int height, int
>>> shift, uint16_t mask);
>>> +typedef void (*planecopy_pp_t) (const pixel* src, intptr_t srcStride,
>>> pixel* dst, intptr_t dstStride, int width, int height, int shift);
>>> typedef pixel (*planeClipAndMax_t)(pixel *src, intptr_t stride, int
>>> width, int height, uint64_t *outsum, const pixel minPix, const pixel
>>> maxPix);
>>>
>>> typedef void (*cutree_propagate_cost) (int* dst, const uint16_t*
>>> propagateIn, const int32_t* intraCosts, const uint16_t* interCosts, const
>>> int32_t* invQscales, const double* fpsFactor, int len);
>>> @@ -358,6 +359,7 @@
>>> planecopy_cp_t planecopy_cp;
>>> planecopy_sp_t planecopy_sp;
>>> planecopy_sp_t planecopy_sp_shl;
>>> + planecopy_pp_t planecopy_pp_shr;
>>> planeClipAndMax_t planeClipAndMax;
>>>
>>> weightp_sp_t weight_sp;
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/encoder/analysis.cpp
>>> --- a/source/encoder/analysis.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/encoder/analysis.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -1317,12 +1317,19 @@
>>> if (md.bestMode && m_param->bEnableRecursionSkip &&
>>> !bCtuInfoCheck && !(m_param->bAnalysisType == AVC_INFO &&
>>> m_param->analysisLoadReuseLevel == 7 && (m_modeFlag[0] || m_modeFlag[1])))
>>> {
>>> skipRecursion = md.bestMode->cu.isSkipped(0);
>>> - if (mightSplit && depth >= minDepth && !skipRecursion)
>>> + if (mightSplit && !skipRecursion)
>>> {
>>> - if (depth)
>>> - skipRecursion = recursionDepthCheck(parentCTU,
>>> cuGeom, *md.bestMode);
>>> - if (m_bHD && !skipRecursion && m_param->rdLevel == 2 &&
>>> md.fencYuv.m_size != MAX_CU_SIZE)
>>> - skipRecursion = complexityCheckCU(*md.bestMode);
>>> + if (depth >= minDepth && m_param->bEnableRecursionSkip
>>> == RDCOST_BASED_RSKIP)
>>> + {
>>> + if (depth)
>>> + skipRecursion = recursionDepthCheck(parentCTU,
>>> cuGeom, *md.bestMode);
>>> + if (m_bHD && !skipRecursion && m_param->rdLevel ==
>>> 2 && md.fencYuv.m_size != MAX_CU_SIZE)
>>> + skipRecursion = complexityCheckCU(*md.bestMode);
>>> + }
>>> + else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 &&
>>> m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + {
>>> + skipRecursion = edgeRecursionSkip(parentCTU,
>>> cuGeom);
>>> + }
>>> }
>>> }
>>> if (m_param->bAnalysisType == AVC_INFO && md.bestMode &&
>>> cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
>>> @@ -3547,6 +3554,25 @@
>>> return false;
>>> }
>>>
>>> +bool Analysis::edgeRecursionSkip(const CUData& ctu, const CUGeom&
>>> cuGeom)
>>> +{
>>> + int blockType = cuGeom.log2CUSize - 2;
>>> + int shift = cuGeom.log2CUSize * 2;
>>> + intptr_t stride = m_frame->m_fencPic->m_stride;
>>> + pixel* edgePic = m_frame->m_edgeBitPlane +
>>> m_frame->m_fencPic->m_lumaMarginY * m_frame->m_fencPic->m_stride +
>>> m_frame->m_fencPic->m_lumaMarginX;
>>>
>> [KS] edgePic's address is the same for every CU in a frame. Why are you
>> computing this initial offset every time?
>>
>> + intptr_t blockOffsetLuma = (ctu.m_cuPelX +
>>> g_zscanToPelX[cuGeom.absPartIdx]) + (ctu.m_cuPelY +
>>> g_zscanToPelY[cuGeom.absPartIdx]) * stride;
>>>
>> [KS] luma offset computation looks complex with g_zscanToPelX /Y
>> addition. Any specific reason for not using bestMode's data?
>>
>>
>>> + uint64_t sum_ss = primitives.cu[blockType].var(edgePic +
>>> blockOffsetLuma, stride);
>>> + uint32_t sum = (uint32_t)sum_ss;
>>> + uint32_t ss = (uint32_t)(sum_ss >> 32);
>>> + uint32_t pixelCount = 1 << shift;
>>> + double cuEdgeVariance = (ss - ((double)sum * sum / pixelCount)) /
>>> pixelCount;
>>> +
>>> + if (cuEdgeVariance > (double)m_param->edgeThreshold)
>>> + return false;
>>> + else
>>> + return true;
>>> +}
>>> +
>>> uint32_t Analysis::calculateCUVariance(const CUData& ctu, const CUGeom&
>>> cuGeom)
>>> {
>>> uint32_t cuVariance = 0;
>>> @@ -3570,7 +3596,6 @@
>>> cnt++;
>>> }
>>> }
>>> -
>>> return cuVariance / cnt;
>>> }
>>>
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/encoder/analysis.h
>>> --- a/source/encoder/analysis.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/encoder/analysis.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -52,7 +52,7 @@
>>> splitRefs = 0;
>>> mvCost[0] = 0; // L0
>>> mvCost[1] = 0; // L1
>>> - sa8dCost = 0;
>>> + sa8dCost = 0;
>>> }
>>> };
>>>
>>> @@ -120,7 +120,6 @@
>>>
>>> Mode& compressCTU(CUData& ctu, Frame& frame, const CUGeom& cuGeom,
>>> const Entropy& initialContext);
>>> int32_t loadTUDepth(CUGeom cuGeom, CUData parentCTU);
>>> -
>>> protected:
>>> /* Analysis data for save/load mode, writes/reads data based on
>>> absPartIdx */
>>> x265_analysis_inter_data* m_reuseInterDataCTU;
>>> @@ -192,6 +191,7 @@
>>> uint32_t topSkipMinDepth(const CUData& parentCTU, const CUGeom&
>>> cuGeom);
>>> bool recursionDepthCheck(const CUData& parentCTU, const CUGeom&
>>> cuGeom, const Mode& bestMode);
>>> bool complexityCheckCU(const Mode& bestMode);
>>> + bool edgeRecursionSkip(const CUData& parentCTU, const CUGeom&
>>> cuGeom);
>>>
>>> /* generate residual and recon pixels for an entire CTU recursively
>>> (RD0) */
>>> void encodeResidue(const CUData& parentCTU, const CUGeom& cuGeom);
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/encoder/encoder.cpp
>>> --- a/source/encoder/encoder.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/encoder/encoder.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -1343,9 +1343,9 @@
>>> int32_t numBytes = m_param->sourceBitDepth > 8 ? 2 : 1;
>>> memset(m_edgePic, 0, bufSize * numBytes);
>>>
>>> - if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height,
>>> pic->width, false))
>>> - {
>>> - x265_log(m_param, X265_LOG_ERROR, "Failed edge computation!");
>>> + if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height,
>>> pic->width, false, 1))
>>> + {
>>> + x265_log(m_param, X265_LOG_ERROR, "Failed to compute edge!");
>>> return false;
>>> }
>>>
>>> @@ -1660,6 +1660,13 @@
>>> }
>>> }
>>> }
>>> + if (m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP
>>> && m_param->bHistBasedSceneCut)
>>> + {
>>> + pixel* src = m_edgePic;
>>> + pixel* edgePic = inFrame->m_edgeBitPlane +
>>> inFrame->m_fencPic->m_lumaMarginY * inFrame->m_fencPic->m_stride +
>>> inFrame->m_fencPic->m_lumaMarginX;
>>> + primitives.planecopy_pp_shr(src,
>>> inFrame->m_fencPic->m_picWidth, edgePic, inFrame->m_fencPic->m_stride,
>>> + inFrame->m_fencPic->m_picWidth,
>>> inFrame->m_fencPic->m_picHeight, 0);
>>> + }
>>> }
>>> else
>>> {
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/encoder/frameencoder.cpp
>>> --- a/source/encoder/frameencoder.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/encoder/frameencoder.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -130,7 +130,7 @@
>>> {
>>> rowSum += sliceGroupSizeAccu;
>>> m_sliceBaseRow[++sidx] = i;
>>> - }
>>> + }
>>> }
>>> X265_CHECK(sidx < m_param->maxSlices, "sliceID check failed!");
>>> m_sliceBaseRow[0] = 0;
>>> @@ -268,6 +268,20 @@
>>> curFrame->m_encData->m_jobProvider = this;
>>> curFrame->m_encData->m_slice->m_mref = m_mref;
>>>
>>> + if (!m_param->bHistBasedSceneCut && m_param->rc.aqMode !=
>>> X265_AQ_EDGE && m_param->bEnableRecursionSkip == EDGE_BASED_RSKIP)
>>> + {
>>> + int height = curFrame->m_fencPic->m_picHeight;
>>> + int width = curFrame->m_fencPic->m_picWidth;
>>> + intptr_t stride = curFrame->m_fencPic->m_stride;
>>> + pixel* edgePic = curFrame->m_edgeBitPlane +
>>> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
>>> curFrame->m_fencPic->m_lumaMarginX;
>>> +
>>> + if (!computeEdge(edgePic, curFrame->m_fencPic->m_picOrg[0],
>>> NULL, stride, height, width, false, 1))
>>> + {
>>> + x265_log(m_param, X265_LOG_ERROR, " Failed to compute edge
>>> !");
>>> + return false;
>>> + }
>>> + }
>>> +
>>> if (!m_cuGeoms)
>>> {
>>> if (!initializeGeoms())
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/encoder/slicetype.cpp
>>> --- a/source/encoder/slicetype.cpp Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/encoder/slicetype.cpp Tue Jan 21 10:53:49 2020 +0530
>>> @@ -87,7 +87,7 @@
>>>
>>> namespace X265_NS {
>>>
>>> -bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta,
>>> intptr_t stride, int height, int width, bool bcalcTheta)
>>> +bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta,
>>> intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel)
>>> {
>>> intptr_t rowOne = 0, rowTwo = 0, rowThree = 0, colOne = 0, colTwo =
>>> 0, colThree = 0;
>>> intptr_t middle = 0, topLeft = 0, topRight = 0, bottomLeft = 0,
>>> bottomRight = 0;
>>> @@ -141,7 +141,7 @@
>>> theta = 180 + theta;
>>> edgeTheta[middle] = (pixel)theta;
>>> }
>>> - edgePic[middle] = (pixel)(gradientMagnitude >=
>>> edgeThreshold ? edgeThreshold : blackPixel);
>>> + edgePic[middle] = (pixel)(gradientMagnitude >=
>>> EDGE_THRESHOLD ? whitePixel : blackPixel);
>>> }
>>> }
>>> return true;
>>> @@ -519,6 +519,14 @@
>>> if (param->rc.aqMode == X265_AQ_EDGE)
>>> edgeFilter(curFrame, param);
>>>
>>> + if (param->rc.aqMode == X265_AQ_EDGE &&
>>> !param->bHistBasedSceneCut && param->bEnableRecursionSkip ==
>>> EDGE_BASED_RSKIP)
>>> + {
>>> + pixel* src = curFrame->m_edgePic +
>>> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
>>> curFrame->m_fencPic->m_lumaMarginX;
>>> + pixel* dst = curFrame->m_edgeBitPlane +
>>> curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride +
>>> curFrame->m_fencPic->m_lumaMarginX;
>>> + primitives.planecopy_pp_shr(src,
>>> curFrame->m_fencPic->m_stride, dst,
>>> + curFrame->m_fencPic->m_stride,
>>> curFrame->m_fencPic->m_picWidth, curFrame->m_fencPic->m_picHeight,
>>> SHIFT_TO_BITPLANE);
>>> + }
>>> +
>>> if (param->rc.aqMode == X265_AQ_AUTO_VARIANCE ||
>>> param->rc.aqMode == X265_AQ_AUTO_VARIANCE_BIASED || param->rc.aqMode ==
>>> X265_AQ_EDGE)
>>> {
>>> double bit_depth_correction = 1.f / (1 << (2 *
>>> (X265_DEPTH - 8)));
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/encoder/slicetype.h
>>> --- a/source/encoder/slicetype.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/encoder/slicetype.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -44,9 +44,9 @@
>>> #define EDGE_INCLINATION 45
>>>
>>> #if HIGH_BIT_DEPTH
>>> -#define edgeThreshold 1023.0
>>> +#define EDGE_THRESHOLD 1023.0
>>> #else
>>> -#define edgeThreshold 255.0
>>> +#define EDGE_THRESHOLD 255.0
>>> #endif
>>> #define PI 3.14159265
>>>
>>> @@ -101,7 +101,7 @@
>>> protected:
>>>
>>> uint32_t acEnergyCu(Frame* curFrame, uint32_t blockX, uint32_t
>>> blockY, int csp, uint32_t qgSize);
>>> - uint32_t edgeDensityCu(Frame*curFrame, uint32_t &avgAngle, uint32_t
>>> blockX, uint32_t blockY, uint32_t qgSize);
>>> + uint32_t edgeDensityCu(Frame* curFrame, uint32_t &avgAngle,
>>> uint32_t blockX, uint32_t blockY, uint32_t qgSize);
>>> uint32_t lumaSumCu(Frame* curFrame, uint32_t blockX, uint32_t
>>> blockY, uint32_t qgSize);
>>> uint32_t weightCostLuma(Lowres& fenc, Lowres& ref, WeightParam& wp);
>>> bool allocWeightedRef(Lowres& fenc);
>>> @@ -265,7 +265,6 @@
>>> CostEstimateGroup& operator=(const CostEstimateGroup&);
>>> };
>>>
>>> -bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta,
>>> intptr_t stride, int height, int width, bool bcalcTheta);
>>> -
>>> +bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta,
>>> intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel =
>>> EDGE_THRESHOLD);
>>> }
>>> #endif // ifndef X265_SLICETYPE_H
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/test/regression-tests.txt
>>> --- a/source/test/regression-tests.txt Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/test/regression-tests.txt Tue Jan 21 10:53:49 2020 +0530
>>> @@ -161,6 +161,10 @@
>>> Island_960x540_24.yuv,--no-cutree --aq-mode 0 --bitrate 6000
>>> --scenecut-aware-qp
>>> sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut
>>> --hist-threshold 0.02 --frame-dup --dup-threshold 60 --hrd --bitrate 10000
>>> --vbv-bufsize 15000 --vbv-maxrate 12000
>>> sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut
>>> --hist-threshold 0.02
>>> +crowd_run_1080p50.yuv, --preset faster --ctu 32 --rskip 2
>>> --edge-threshold 5
>>> +crowd_run_1080p50.yuv, --preset fast --ctu 64 --rskip 2
>>> --edge-threshold 5 --aq-mode 4
>>> +crowd_run_1080p50.yuv, --preset slow --ctu 32 --rskip 2
>>> --edge-threshold 5 --hist-scenecut --hist-threshold 0.1
>>> +crowd_run_1080p50.yuv, --preset veryslow --ctu 16 --rskip 2
>>> --edge-threshold 5 --hist-scenecut --hist-threshold 0.1 --aq-mode 4
>>>
>> [KS] I don't understand the purpose to test veryslow with rskip 2 when
>> this algorithm works only for rd 0 to 4 (atleast this patch does only
>> that).
>> Please clarify your intention for adding this command
>>
>>>
>>> # Main12 intraCost overflow bug test
>>> 720p50_parkrun_ter.y4m,--preset medium
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/x265.h
>>> --- a/source/x265.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/x265.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -1857,7 +1857,7 @@
>>> double edgeTransitionThreshold;
>>>
>>> /* Enables histogram based scenecut detection algorithm to detect
>>> scenecuts. Default disabled */
>>> - int bHistBasedSceneCut;
>>> + int bHistBasedSceneCut;
>>>
>>> /* Enable HME search ranges for L0, L1 and L2 respectively. */
>>> int hmeRange[3];
>>> @@ -1874,7 +1874,7 @@
>>> * analysis information stored in analysis-save. Higher the refine
>>> level higher
>>> * the information stored. Default is 5 */
>>> int analysisSaveReuseLevel;
>>> -
>>> +
>>> /* A value between 1 and 10 (both inclusive) determines the level of
>>> * analysis information reused in analysis-load. Higher the refine
>>> level higher
>>> * the information reused. Default is 5 */
>>> @@ -1901,6 +1901,9 @@
>>> * info is available from the corresponding analysis-save. */
>>>
>>> int confWinBottomOffset;
>>> +
>>> + /* Edge variance threshold for quad tree establishment. */
>>> + float edgeThreshold;
>>> } x265_param;
>>>
>>> /* x265_param_alloc:
>>> diff -r acc5d16999e2 -r e0e0270ead41 source/x265cli.h
>>> --- a/source/x265cli.h Mon Jan 20 18:07:59 2020 +0530
>>> +++ b/source/x265cli.h Tue Jan 21 10:53:49 2020 +0530
>>> @@ -105,8 +105,8 @@
>>> { "amp", no_argument, NULL, 0 },
>>> { "no-early-skip", no_argument, NULL, 0 },
>>> { "early-skip", no_argument, NULL, 0 },
>>> - { "no-rskip", no_argument, NULL, 0 },
>>> - { "rskip", no_argument, NULL, 0 },
>>> + { "rskip", required_argument, NULL, 0 },
>>> + { "edge-threshold", required_argument, NULL, 0 },
>>> { "no-fast-cbf", no_argument, NULL, 0 },
>>> { "fast-cbf", no_argument, NULL, 0 },
>>> { "no-tskip", no_argument, NULL, 0 },
>>> @@ -457,7 +457,8 @@
>>> H0(" --[no-]ssim-rd Enable ssim rate distortion
>>> optimization, 0 to disable. Default %s\n", OPT(param->bSsimRd));
>>> H0(" --[no-]rd-refine Enable QP based RD refinement
>>> for rd levels 5 and 6. Default %s\n", OPT(param->bEnableRdRefine));
>>> H0(" --[no-]early-skip Enable early SKIP detection.
>>> Default %s\n", OPT(param->bEnableEarlySkip));
>>> - H0(" --[no-]rskip Enable early exit from
>>> recursion. Default %s\n", OPT(param->bEnableRecursionSkip));
>>> + H0(" --rskip <mode> Set mode for early exit from
>>> recursion. Mode 1: exit using rdcost. Mode 2: exit using edge density. Mode
>>> 0: disabled. Default %s\n", OPT(param->bEnableRecursionSkip));
>>> + H1(" --edge-threshold Threshold in terms of
>>> percentage for minimum edge density in CUs to terminate the recursion
>>> depth. Applicable only for rskip mode 2. Default %s\n",
>>> OPT(param->edgeThreshold));
>>> H1(" --[no-]tskip-fast Enable fast intra transform
>>> skipping. Default %s\n", OPT(param->bEnableTSkipFast));
>>> H1(" --[no-]splitrd-skip Enable skipping split RD
>>> analysis when sum of split CU rdCost larger than one split CU rdCost for
>>> Intra CU. Default %s\n", OPT(param->bEnableSplitRdSkip));
>>> H1(" --nr-intra <integer> An integer value in range of 0
>>> to 2000, which denotes strength of noise reduction in intra CUs. Default
>>> 0\n");
>>> _______________________________________________
>>> x265-devel mailing list
>>> x265-devel at videolan.org
>>> https://mailman.videolan.org/listinfo/x265-devel
>>>
>>
>>
>> --
>> Regards,
>> Kavitha
>> _______________________________________________
>> x265-devel mailing list
>> x265-devel at videolan.org
>> https://mailman.videolan.org/listinfo/x265-devel
>>
> _______________________________________________
> x265-devel mailing list
> x265-devel at videolan.org
> https://mailman.videolan.org/listinfo/x265-devel
>
--
*With Regards,*
*Srikanth Kurapati.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/x265-devel/attachments/20200122/0b7f502f/attachment-0001.html>
More information about the x265-devel
mailing list