[x265] [PATCH] Edge Aware Quad Tree Establishment
srikanth.kurapati at multicorewareinc.com
srikanth.kurapati at multicorewareinc.com
Wed Jan 29 07:50:28 CET 2020
# HG changeset patch
# User Srikanth Kurapati
# Date 1580280547 -19800
# Wed Jan 29 12:19:07 2020 +0530
# Node ID e9c8c0089bddc9e9e47774b5fda1f4dff1fb45e4
# Parent fdbd4e4a2aff93bfc14b10efcd9e681a7ebae311
Edge Aware Quad Tree Establishment.
This patch does the following:
1. Terminates recursion using edge information.
2. Adds modes for "--rskip". Modes 0,1 for current usage and 2,3 for edge based
rskips for RD levels 0 to 6.
3. Adds option "edge-threshold" to decide recursion skip using CU edge density.
4. Re uses edge information when already available in encoder.
diff -r fdbd4e4a2aff -r e9c8c0089bdd doc/reST/cli.rst
--- a/doc/reST/cli.rst Sat Jan 25 18:08:03 2020 +0530
+++ b/doc/reST/cli.rst Wed Jan 29 12:19:07 2020 +0530
@@ -842,15 +842,31 @@
Measure 2Nx2N merge candidates first; if no residual is found,
additional modes at that depth are not analysed. Default disabled
-.. option:: --rskip, --no-rskip
-
- This option determines early exit from CU depth recursion. When a skip CU is
- found, additional heuristics (depending on rd-level) are used to decide whether
- to terminate recursion. In rdlevels 5 and 6, comparison with inter2Nx2N is used,
- while at rdlevels 4 and neighbour costs are used to skip recursion.
- Provides minimal quality degradation at good performance gains when enabled.
-
- Default: enabled, disabled for :option:`--tune grain`
+.. option:: --rskip <0|1|2|3>
+
+ This option determines early exit from CU depth recursion in modes 1, 2 and 3. When a skip CU is
+ found, additional heuristics (depending on RD level and rskip mode) are used to decide whether
+ to terminate recursion. The following table summarizes the behavior.
+
+ +----------+------------+----------------------------------------------------------------+
+ | RD Level | Rskip Mode | Skip Recursion Heuristic |
+ +==========+============+================================================================+
+ | 0 - 4 | 1 | Neighbour costs. |
+ +----------+------------+----------------------------------------------------------------+
+ | 5 - 6 | 1 | Comparison with inter2Nx2N. |
+ +----------+------------+----------------------------------------------------------------+
+ | 0 - 6 | 2 | CU edge denstiy. |
+ +----------+------------+----------------------------------------------------------------+
+ | 0 - 6 | 3 | CU edge denstiy with forceful skip for lower levels of CTU. |
+ +----------+------------+----------------------------------------------------------------+
+
+ Provides minimal quality degradation at good performance gains for non-zero modes.
+ :option:`--r-skip mode 0` means disabled. Default: 1, disabled when :option:`--tune grain` is used.
+
+.. option:: --edge-threshold <0..100>
+
+ Denotes the minimum expected edge-density percentage within the CU, below which the recursion is skipped.
+ Default: 5, requires :option:`--rskip mode 2|3` to be enabled.
.. option:: --splitrd-skip, --no-splitrd-skip
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/CMakeLists.txt
--- a/source/CMakeLists.txt Sat Jan 25 18:08:03 2020 +0530
+++ b/source/CMakeLists.txt Wed Jan 29 12:19:07 2020 +0530
@@ -29,7 +29,7 @@
option(STATIC_LINK_CRT "Statically link C runtime for release builds" OFF)
mark_as_advanced(FPROFILE_USE FPROFILE_GENERATE NATIVE_BUILD)
# X265_BUILD must be incremented each time the public API is changed
-set(X265_BUILD 188)
+set(X265_BUILD 189)
configure_file("${PROJECT_SOURCE_DIR}/x265.def.in"
"${PROJECT_BINARY_DIR}/x265.def")
configure_file("${PROJECT_SOURCE_DIR}/x265_config.h.in"
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/common/common.h
--- a/source/common/common.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/common/common.h Wed Jan 29 12:19:07 2020 +0530
@@ -129,6 +129,7 @@
typedef uint64_t sum2_t;
typedef uint64_t pixel4;
typedef int64_t ssum2_t;
+#define SHIFT_TO_BITPLANE 9
#define HISTOGRAM_BINS 1024
#define SHIFT 1
#else
@@ -137,6 +138,7 @@
typedef uint32_t sum2_t;
typedef uint32_t pixel4;
typedef int32_t ssum2_t; // Signed sum
+#define SHIFT_TO_BITPLANE 7
#define HISTOGRAM_BINS 256
#define SHIFT 0
#endif // if HIGH_BIT_DEPTH
@@ -272,6 +274,9 @@
#define MAX_TR_SIZE (1 << MAX_LOG2_TR_SIZE)
#define MAX_TS_SIZE (1 << MAX_LOG2_TS_SIZE)
+#define RDCOST_BASED_RSKIP 1
+#define EDGE_BASED_RSKIP 2
+
#define COEF_REMAIN_BIN_REDUCTION 3 // indicates the level at which the VLC
// transitions from Golomb-Rice to TU+EG(k)
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/common/frame.cpp
--- a/source/common/frame.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/common/frame.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -61,6 +61,8 @@
m_edgePic = NULL;
m_gaussianPic = NULL;
m_thetaPic = NULL;
+ m_edgeBitPlane = NULL;
+ m_edgeBitPic = NULL;
}
bool Frame::create(x265_param *param, float* quantOffsets)
@@ -115,6 +117,19 @@
m_thetaPic = X265_MALLOC(pixel, m_stride * (maxHeight + (m_lumaMarginY * 2)));
}
+ if (param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
+ uint32_t numCuInWidth = (param->sourceWidth + param->maxCUSize - 1) / param->maxCUSize;
+ uint32_t numCuInHeight = (param->sourceHeight + param->maxCUSize - 1) / param->maxCUSize;
+ uint32_t lumaMarginX = param->maxCUSize + 32;
+ uint32_t lumaMarginY = param->maxCUSize + 16;
+ uint32_t stride = (numCuInWidth * param->maxCUSize) + (lumaMarginX << 1);
+ uint32_t maxHeight = numCuInHeight * param->maxCUSize;
+ m_bitPlaneSize = stride * (maxHeight + (lumaMarginY * 2));
+ CHECKED_MALLOC_ZERO(m_edgeBitPlane, pixel, m_bitPlaneSize);
+ m_edgeBitPic = m_edgeBitPlane + lumaMarginY * stride + lumaMarginX;
+ }
+
if (m_fencPic->create(param, !!m_param->bCopyPicToFrame) && m_lowres.create(param, m_fencPic, param->rc.qgSize))
{
X265_CHECK((m_reconColCount == NULL), "m_reconColCount was initialized");
@@ -267,4 +282,10 @@
X265_FREE(m_gaussianPic);
X265_FREE(m_thetaPic);
}
+
+ if (m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
+ X265_FREE_ZERO(m_edgeBitPlane);
+ m_edgeBitPic = NULL;
+ }
}
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/common/frame.h
--- a/source/common/frame.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/common/frame.h Wed Jan 29 12:19:07 2020 +0530
@@ -137,6 +137,9 @@
pixel* m_gaussianPic;
pixel* m_thetaPic;
+ pixel* m_edgeBitPlane;
+ pixel* m_edgeBitPic;
+ uint32_t m_bitPlaneSize;
Frame();
bool create(x265_param *param, float* quantOffsets);
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/common/param.cpp
--- a/source/common/param.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/common/param.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -199,6 +199,7 @@
param->bEnableWeightedBiPred = 0;
param->bEnableEarlySkip = 1;
param->bEnableRecursionSkip = 1;
+ param->edgeThreshold = 0.05f;
param->bEnableAMP = 0;
param->bEnableRectInter = 0;
param->rdLevel = 3;
@@ -702,8 +703,9 @@
OPT("ref") p->maxNumReferences = atoi(value);
OPT("fast-intra") p->bEnableFastIntra = atobool(value);
OPT("early-skip") p->bEnableEarlySkip = atobool(value);
- OPT("rskip") p->bEnableRecursionSkip = atobool(value);
- OPT("me")p->searchMethod = parseName(value, x265_motion_est_names, bError);
+ OPT("rskip") p->bEnableRecursionSkip = atoi(value);
+ OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0f;
+ OPT("me") p->searchMethod = parseName(value, x265_motion_est_names, bError);
OPT("subme") p->subpelRefine = atoi(value);
OPT("merange") p->searchRange = atoi(value);
OPT("rect") p->bEnableRectInter = atobool(value);
@@ -919,7 +921,7 @@
OPT("max-merge") p->maxNumMergeCand = (uint32_t)atoi(value);
OPT("temporal-mvp") p->bEnableTemporalMvp = atobool(value);
OPT("early-skip") p->bEnableEarlySkip = atobool(value);
- OPT("rskip") p->bEnableRecursionSkip = atobool(value);
+ OPT("rskip") p->bEnableRecursionSkip = atoi(value);
OPT("rdpenalty") p->rdPenalty = atoi(value);
OPT("tskip") p->bEnableTransformSkip = atobool(value);
OPT("no-tskip-fast") p->bEnableTSkipFast = atobool(value);
@@ -1221,6 +1223,7 @@
}
}
OPT("hist-threshold") p->edgeTransitionThreshold = atof(value);
+ OPT("edge-threshold") p->edgeThreshold = atoi(value)/100.0f;
OPT("lookahead-threads") p->lookaheadThreads = atoi(value);
OPT("opt-cu-delta-qp") p->bOptCUDeltaQP = atobool(value);
OPT("multi-pass-opt-analysis") p->analysisMultiPassRefine = atobool(value);
@@ -1596,9 +1599,16 @@
CHECK(param->rdLevel < 1 || param->rdLevel > 6,
"RD Level is out of range");
CHECK(param->rdoqLevel < 0 || param->rdoqLevel > 2,
- "RDOQ Level is out of range");
+ "RDOQ Level is out of range");
CHECK(param->dynamicRd < 0 || param->dynamicRd > x265_ADAPT_RD_STRENGTH,
- "Dynamic RD strength must be between 0 and 4");
+ "Dynamic RD strength must be between 0 and 4");
+ CHECK(param->bEnableRecursionSkip > 3 || param->bEnableRecursionSkip < 0,
+ "Invalid Recursion skip mode. Valid modes 0,1,2,3");
+ if (param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
+ CHECK(param->edgeThreshold < 0.0f || param->edgeThreshold > 1.0f,
+ "Minimum edge density percentage for a CU should be an integer between 0 to 100");
+ }
CHECK(param->bframes && param->bframes >= param->lookaheadDepth && !param->rc.bStatRead,
"Lookahead depth must be greater than the max consecutive bframe count");
CHECK(param->bframes < 0,
@@ -1908,7 +1918,9 @@
TOOLVAL(param->psyRdoq, "psy-rdoq=%.2lf");
TOOLOPT(param->bEnableRdRefine, "rd-refine");
TOOLOPT(param->bEnableEarlySkip, "early-skip");
- TOOLOPT(param->bEnableRecursionSkip, "rskip");
+ TOOLVAL(param->bEnableRecursionSkip, "rskip mode=%d");
+ if (param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ TOOLVAL(param->edgeThreshold, "rskip-threshold=%.2f");
TOOLOPT(param->bEnableSplitRdSkip, "splitrd-skip");
TOOLVAL(param->noiseReductionIntra, "nr-intra=%d");
TOOLVAL(param->noiseReductionInter, "nr-inter=%d");
@@ -2067,6 +2079,9 @@
s += sprintf(s, " selective-sao=%d", p->selectiveSAO);
BOOL(p->bEnableEarlySkip, "early-skip");
BOOL(p->bEnableRecursionSkip, "rskip");
+ if (p->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ s += sprintf(s, " edge-threshold=%f", p->edgeThreshold);
+
BOOL(p->bEnableFastIntra, "fast-intra");
BOOL(p->bEnableTSkipFast, "tskip-fast");
BOOL(p->bCULossless, "cu-lossless");
@@ -2374,6 +2389,7 @@
dst->rdLevel = src->rdLevel;
dst->bEnableEarlySkip = src->bEnableEarlySkip;
dst->bEnableRecursionSkip = src->bEnableRecursionSkip;
+ dst->edgeThreshold = src->edgeThreshold;
dst->bEnableFastIntra = src->bEnableFastIntra;
dst->bEnableTSkipFast = src->bEnableTSkipFast;
dst->bCULossless = src->bCULossless;
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/common/pixel.cpp
--- a/source/common/pixel.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/common/pixel.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -876,6 +876,18 @@
}
}
+static void planecopy_pp_shr_c(const pixel* src, intptr_t srcStride, pixel* dst, intptr_t dstStride, int width, int height, int shift)
+{
+ for (int r = 0; r < height; r++)
+ {
+ for (int c = 0; c < width; c++)
+ dst[c] = (pixel)((src[c] >> shift));
+
+ dst += dstStride;
+ src += srcStride;
+ }
+}
+
static void planecopy_sp_shl_c(const uint16_t* src, intptr_t srcStride, pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t mask)
{
for (int r = 0; r < height; r++)
@@ -1316,6 +1328,7 @@
p.planecopy_cp = planecopy_cp_c;
p.planecopy_sp = planecopy_sp_c;
p.planecopy_sp_shl = planecopy_sp_shl_c;
+ p.planecopy_pp_shr = planecopy_pp_shr_c;
#if HIGH_BIT_DEPTH
p.planeClipAndMax = planeClipAndMax_c;
#endif
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/common/primitives.h
--- a/source/common/primitives.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/common/primitives.h Wed Jan 29 12:19:07 2020 +0530
@@ -204,6 +204,7 @@
typedef void (*sign_t)(int8_t *dst, const pixel *src1, const pixel *src2, const int endX);
typedef void (*planecopy_cp_t) (const uint8_t* src, intptr_t srcStride, pixel* dst, intptr_t dstStride, int width, int height, int shift);
typedef void (*planecopy_sp_t) (const uint16_t* src, intptr_t srcStride, pixel* dst, intptr_t dstStride, int width, int height, int shift, uint16_t mask);
+typedef void (*planecopy_pp_t) (const pixel* src, intptr_t srcStride, pixel* dst, intptr_t dstStride, int width, int height, int shift);
typedef pixel (*planeClipAndMax_t)(pixel *src, intptr_t stride, int width, int height, uint64_t *outsum, const pixel minPix, const pixel maxPix);
typedef void (*cutree_propagate_cost) (int* dst, const uint16_t* propagateIn, const int32_t* intraCosts, const uint16_t* interCosts, const int32_t* invQscales, const double* fpsFactor, int len);
@@ -358,6 +359,7 @@
planecopy_cp_t planecopy_cp;
planecopy_sp_t planecopy_sp;
planecopy_sp_t planecopy_sp_shl;
+ planecopy_pp_t planecopy_pp_shr;
planeClipAndMax_t planeClipAndMax;
weightp_sp_t weight_sp;
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/encoder/analysis.cpp
--- a/source/encoder/analysis.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/encoder/analysis.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -1317,12 +1317,21 @@
if (md.bestMode && m_param->bEnableRecursionSkip && !bCtuInfoCheck && !(m_param->bAnalysisType == AVC_INFO && m_param->analysisLoadReuseLevel == 7 && (m_modeFlag[0] || m_modeFlag[1])))
{
skipRecursion = md.bestMode->cu.isSkipped(0);
- if (mightSplit && depth >= minDepth && !skipRecursion)
+ if (mightSplit && !skipRecursion)
{
- if (depth)
- skipRecursion = recursionDepthCheck(parentCTU, cuGeom, *md.bestMode);
- if (m_bHD && !skipRecursion && m_param->rdLevel == 2 && md.fencYuv.m_size != MAX_CU_SIZE)
+ if (depth >= minDepth && m_param->bEnableRecursionSkip == RDCOST_BASED_RSKIP)
+ {
+ if (depth)
+ skipRecursion = recursionDepthCheck(parentCTU, cuGeom, *md.bestMode);
+ if (m_bHD && !skipRecursion && m_param->rdLevel == 2 && md.fencYuv.m_size != MAX_CU_SIZE)
+ skipRecursion = complexityCheckCU(*md.bestMode);
+ }
+ else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 && m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
skipRecursion = complexityCheckCU(*md.bestMode);
+ }
+ else if (m_param->bEnableRecursionSkip > EDGE_BASED_RSKIP)
+ skipRecursion = true;
}
}
if (m_param->bAnalysisType == AVC_INFO && md.bestMode && cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
@@ -2015,8 +2024,12 @@
checkInter_rd5_6(md.pred[PRED_2Nx2N], cuGeom, SIZE_2Nx2N, refMasks);
checkBestMode(md.pred[PRED_2Nx2N], cuGeom.depth);
- if (m_param->bEnableRecursionSkip && depth && m_modeDepth[depth - 1].bestMode)
+ if (m_param->bEnableRecursionSkip == RDCOST_BASED_RSKIP && depth && m_modeDepth[depth - 1].bestMode)
skipRecursion = md.bestMode && !md.bestMode->cu.getQtRootCbf(0);
+ else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 && m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ skipRecursion = md.bestMode && complexityCheckCU(*md.bestMode);
+ else if (m_param->bEnableRecursionSkip > EDGE_BASED_RSKIP)
+ skipRecursion = true;
}
if (m_param->bAnalysisType == AVC_INFO && md.bestMode && cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
skipRecursion = true;
@@ -3525,26 +3538,47 @@
bool Analysis::complexityCheckCU(const Mode& bestMode)
{
- uint32_t mean = 0;
- uint32_t homo = 0;
- uint32_t cuSize = bestMode.fencYuv->m_size;
- for (uint32_t y = 0; y < cuSize; y++) {
- for (uint32_t x = 0; x < cuSize; x++) {
- mean += (bestMode.fencYuv->m_buf[0][y * cuSize + x]);
+ if (m_param->bEnableRecursionSkip == RDCOST_BASED_RSKIP)
+ {
+ uint32_t mean = 0;
+ uint32_t homo = 0;
+ uint32_t cuSize = bestMode.fencYuv->m_size;
+ for (uint32_t y = 0; y < cuSize; y++) {
+ for (uint32_t x = 0; x < cuSize; x++) {
+ mean += (bestMode.fencYuv->m_buf[0][y * cuSize + x]);
+ }
}
+ mean = mean / (cuSize * cuSize);
+ for (uint32_t y = 0; y < cuSize; y++) {
+ for (uint32_t x = 0; x < cuSize; x++) {
+ homo += abs(int(bestMode.fencYuv->m_buf[0][y * cuSize + x] - mean));
+ }
+ }
+ homo = homo / (cuSize * cuSize);
+
+ if (homo < (.1 * mean))
+ return true;
+
+ return false;
}
- mean = mean / (cuSize * cuSize);
- for (uint32_t y = 0 ; y < cuSize; y++){
- for (uint32_t x = 0 ; x < cuSize; x++){
- homo += abs(int(bestMode.fencYuv->m_buf[0][y * cuSize + x] - mean));
- }
+ else if (m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
+ int blockType = bestMode.cu.m_log2CUSize[0] - 2;
+ int shift = bestMode.cu.m_log2CUSize[0] * 2;
+ intptr_t stride = m_frame->m_fencPic->m_stride;
+ intptr_t blockOffsetLuma = bestMode.cu.m_cuPelX + bestMode.cu.m_cuPelY * stride;
+ uint64_t sum_ss = primitives.cu[blockType].var(m_frame->m_edgeBitPic + blockOffsetLuma, stride);
+ uint32_t sum = (uint32_t)sum_ss;
+ uint32_t ss = (uint32_t)(sum_ss >> 32);
+ uint32_t pixelCount = 1 << shift;
+ double cuEdgeVariance = (ss - ((double)sum * sum / pixelCount)) / pixelCount;
+ if (cuEdgeVariance > (double)m_param->edgeThreshold)
+ return false;
+ else
+ return true;
}
- homo = homo / (cuSize * cuSize);
-
- if (homo < (.1 * mean))
- return true;
-
- return false;
+ else
+ return false;
}
uint32_t Analysis::calculateCUVariance(const CUData& ctu, const CUGeom& cuGeom)
@@ -3570,7 +3604,6 @@
cnt++;
}
}
-
return cuVariance / cnt;
}
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/encoder/analysis.h
--- a/source/encoder/analysis.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/encoder/analysis.h Wed Jan 29 12:19:07 2020 +0530
@@ -52,7 +52,7 @@
splitRefs = 0;
mvCost[0] = 0; // L0
mvCost[1] = 0; // L1
- sa8dCost = 0;
+ sa8dCost = 0;
}
};
@@ -120,7 +120,6 @@
Mode& compressCTU(CUData& ctu, Frame& frame, const CUGeom& cuGeom, const Entropy& initialContext);
int32_t loadTUDepth(CUGeom cuGeom, CUData parentCTU);
-
protected:
/* Analysis data for save/load mode, writes/reads data based on absPartIdx */
x265_analysis_inter_data* m_reuseInterDataCTU;
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/encoder/encoder.cpp
--- a/source/encoder/encoder.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/encoder/encoder.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -1343,9 +1343,9 @@
int32_t numBytes = m_param->sourceBitDepth > 8 ? 2 : 1;
memset(m_edgePic, 0, bufSize * numBytes);
- if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height, pic->width, false))
- {
- x265_log(m_param, X265_LOG_ERROR, "Failed edge computation!");
+ if (!computeEdge(m_edgePic, src, NULL, pic->width, pic->height, pic->width, false, 1))
+ {
+ x265_log(m_param, X265_LOG_ERROR, "Failed to compute edge!");
return false;
}
@@ -1660,6 +1660,12 @@
}
}
}
+ if (m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP && m_param->bHistBasedSceneCut)
+ {
+ pixel* src = m_edgePic;
+ primitives.planecopy_pp_shr(src, inFrame->m_fencPic->m_picWidth, inFrame->m_edgeBitPic, inFrame->m_fencPic->m_stride,
+ inFrame->m_fencPic->m_picWidth, inFrame->m_fencPic->m_picHeight, 0);
+ }
}
else
{
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/encoder/frameencoder.cpp
--- a/source/encoder/frameencoder.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/encoder/frameencoder.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -130,7 +130,7 @@
{
rowSum += sliceGroupSizeAccu;
m_sliceBaseRow[++sidx] = i;
- }
+ }
}
X265_CHECK(sidx < m_param->maxSlices, "sliceID check failed!");
m_sliceBaseRow[0] = 0;
@@ -268,6 +268,19 @@
curFrame->m_encData->m_jobProvider = this;
curFrame->m_encData->m_slice->m_mref = m_mref;
+ if (!m_param->bHistBasedSceneCut && m_param->rc.aqMode != X265_AQ_EDGE && m_param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
+ int height = curFrame->m_fencPic->m_picHeight;
+ int width = curFrame->m_fencPic->m_picWidth;
+ intptr_t stride = curFrame->m_fencPic->m_stride;
+
+ if (!computeEdge(curFrame->m_edgeBitPic, curFrame->m_fencPic->m_picOrg[0], NULL, stride, height, width, false, 1))
+ {
+ x265_log(m_param, X265_LOG_ERROR, " Failed to compute edge !");
+ return false;
+ }
+ }
+
if (!m_cuGeoms)
{
if (!initializeGeoms())
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/encoder/slicetype.cpp
--- a/source/encoder/slicetype.cpp Sat Jan 25 18:08:03 2020 +0530
+++ b/source/encoder/slicetype.cpp Wed Jan 29 12:19:07 2020 +0530
@@ -87,7 +87,7 @@
namespace X265_NS {
-bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta, intptr_t stride, int height, int width, bool bcalcTheta)
+bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta, intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel)
{
intptr_t rowOne = 0, rowTwo = 0, rowThree = 0, colOne = 0, colTwo = 0, colThree = 0;
intptr_t middle = 0, topLeft = 0, topRight = 0, bottomLeft = 0, bottomRight = 0;
@@ -141,7 +141,7 @@
theta = 180 + theta;
edgeTheta[middle] = (pixel)theta;
}
- edgePic[middle] = (pixel)(gradientMagnitude >= edgeThreshold ? edgeThreshold : blackPixel);
+ edgePic[middle] = (pixel)(gradientMagnitude >= EDGE_THRESHOLD ? whitePixel : blackPixel);
}
}
return true;
@@ -519,6 +519,13 @@
if (param->rc.aqMode == X265_AQ_EDGE)
edgeFilter(curFrame, param);
+ if (param->rc.aqMode == X265_AQ_EDGE && !param->bHistBasedSceneCut && param->bEnableRecursionSkip >= EDGE_BASED_RSKIP)
+ {
+ pixel* src = curFrame->m_edgePic + curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride + curFrame->m_fencPic->m_lumaMarginX;
+ primitives.planecopy_pp_shr(src, curFrame->m_fencPic->m_stride, curFrame->m_edgeBitPic,
+ curFrame->m_fencPic->m_stride, curFrame->m_fencPic->m_picWidth, curFrame->m_fencPic->m_picHeight, SHIFT_TO_BITPLANE);
+ }
+
if (param->rc.aqMode == X265_AQ_AUTO_VARIANCE || param->rc.aqMode == X265_AQ_AUTO_VARIANCE_BIASED || param->rc.aqMode == X265_AQ_EDGE)
{
double bit_depth_correction = 1.f / (1 << (2 * (X265_DEPTH - 8)));
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/encoder/slicetype.h
--- a/source/encoder/slicetype.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/encoder/slicetype.h Wed Jan 29 12:19:07 2020 +0530
@@ -44,9 +44,9 @@
#define EDGE_INCLINATION 45
#if HIGH_BIT_DEPTH
-#define edgeThreshold 1023.0
+#define EDGE_THRESHOLD 1023.0
#else
-#define edgeThreshold 255.0
+#define EDGE_THRESHOLD 255.0
#endif
#define PI 3.14159265
@@ -101,7 +101,7 @@
protected:
uint32_t acEnergyCu(Frame* curFrame, uint32_t blockX, uint32_t blockY, int csp, uint32_t qgSize);
- uint32_t edgeDensityCu(Frame*curFrame, uint32_t &avgAngle, uint32_t blockX, uint32_t blockY, uint32_t qgSize);
+ uint32_t edgeDensityCu(Frame* curFrame, uint32_t &avgAngle, uint32_t blockX, uint32_t blockY, uint32_t qgSize);
uint32_t lumaSumCu(Frame* curFrame, uint32_t blockX, uint32_t blockY, uint32_t qgSize);
uint32_t weightCostLuma(Lowres& fenc, Lowres& ref, WeightParam& wp);
bool allocWeightedRef(Lowres& fenc);
@@ -265,7 +265,6 @@
CostEstimateGroup& operator=(const CostEstimateGroup&);
};
-bool computeEdge(pixel *edgePic, pixel *refPic, pixel *edgeTheta, intptr_t stride, int height, int width, bool bcalcTheta);
-
+bool computeEdge(pixel* edgePic, pixel* refPic, pixel* edgeTheta, intptr_t stride, int height, int width, bool bcalcTheta, pixel whitePixel = EDGE_THRESHOLD);
}
#endif // ifndef X265_SLICETYPE_H
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/test/regression-tests.txt
--- a/source/test/regression-tests.txt Sat Jan 25 18:08:03 2020 +0530
+++ b/source/test/regression-tests.txt Wed Jan 29 12:19:07 2020 +0530
@@ -162,7 +162,11 @@
sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut --hist-threshold 0.02 --frame-dup --dup-threshold 60 --hrd --bitrate 10000 --vbv-bufsize 15000 --vbv-maxrate 12000
sintel_trailer_2k_1920x1080_24.yuv, --preset medium --hist-scenecut --hist-threshold 0.02
sintel_trailer_2k_1920x1080_24.yuv, --preset ultrafast --hist-scenecut --hist-threshold 0.02
-
+crowd_run_1080p50.yuv, --preset faster --ctu 32 --rskip 2 --edge-threshold 5
+crowd_run_1080p50.yuv, --preset fast --ctu 64 --rskip 2 --edge-threshold 5 --aq-mode 4
+crowd_run_1080p50.yuv, --preset slow --ctu 32 --rskip 2 --edge-threshold 5 --hist-scenecut --hist-threshold 0.1
+crowd_run_1080p50.yuv, --preset slower --ctu 16 --rskip 2 --edge-threshold 5 --hist-scenecut --hist-threshold 0.1 --aq-mode 4
+
# Main12 intraCost overflow bug test
720p50_parkrun_ter.y4m,--preset medium
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/x265.h
--- a/source/x265.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/x265.h Wed Jan 29 12:19:07 2020 +0530
@@ -1255,9 +1255,9 @@
* skip blocks. Default is disabled */
int bEnableEarlySkip;
- /* Enable early CU size decisions to avoid recursing to higher depths.
+ /* Enable early CU size decisions to avoid recursing to higher depths.
* Default is enabled */
- int bEnableRecursionSkip;
+ int bEnableRecursionSkip;
/* Use a faster search method to find the best intra mode. Default is 0 */
int bEnableFastIntra;
@@ -1857,7 +1857,7 @@
double edgeTransitionThreshold;
/* Enables histogram based scenecut detection algorithm to detect scenecuts. Default disabled */
- int bHistBasedSceneCut;
+ int bHistBasedSceneCut;
/* Enable HME search ranges for L0, L1 and L2 respectively. */
int hmeRange[3];
@@ -1874,7 +1874,7 @@
* analysis information stored in analysis-save. Higher the refine level higher
* the information stored. Default is 5 */
int analysisSaveReuseLevel;
-
+
/* A value between 1 and 10 (both inclusive) determines the level of
* analysis information reused in analysis-load. Higher the refine level higher
* the information reused. Default is 5 */
@@ -1901,6 +1901,9 @@
* info is available from the corresponding analysis-save. */
int confWinBottomOffset;
+
+ /* Edge variance threshold for quad tree establishment. */
+ float edgeThreshold;
} x265_param;
/* x265_param_alloc:
diff -r fdbd4e4a2aff -r e9c8c0089bdd source/x265cli.h
--- a/source/x265cli.h Sat Jan 25 18:08:03 2020 +0530
+++ b/source/x265cli.h Wed Jan 29 12:19:07 2020 +0530
@@ -105,8 +105,8 @@
{ "amp", no_argument, NULL, 0 },
{ "no-early-skip", no_argument, NULL, 0 },
{ "early-skip", no_argument, NULL, 0 },
- { "no-rskip", no_argument, NULL, 0 },
- { "rskip", no_argument, NULL, 0 },
+ { "rskip", required_argument, NULL, 0 },
+ { "edge-threshold", required_argument, NULL, 0 },
{ "no-fast-cbf", no_argument, NULL, 0 },
{ "fast-cbf", no_argument, NULL, 0 },
{ "no-tskip", no_argument, NULL, 0 },
@@ -457,7 +457,9 @@
H0(" --[no-]ssim-rd Enable ssim rate distortion optimization, 0 to disable. Default %s\n", OPT(param->bSsimRd));
H0(" --[no-]rd-refine Enable QP based RD refinement for rd levels 5 and 6. Default %s\n", OPT(param->bEnableRdRefine));
H0(" --[no-]early-skip Enable early SKIP detection. Default %s\n", OPT(param->bEnableEarlySkip));
- H0(" --[no-]rskip Enable early exit from recursion. Default %s\n", OPT(param->bEnableRecursionSkip));
+ H0(" --rskip <mode> Set mode for early exit from recursion. Mode 1: exit using rdcost. Mode 2: exit using edge density. Mode 3: exit using edge density with forceful skip for small sized CU's."
+ " Mode 0: disabled. Default %s\n", OPT(param->bEnableRecursionSkip));
+ H1(" --edge-threshold Threshold in terms of percentage for minimum edge density in CUs to terminate the recursion depth. Applicable only for rskip modes 2 and 3. Default %s\n", OPT(param->edgeThreshold));
H1(" --[no-]tskip-fast Enable fast intra transform skipping. Default %s\n", OPT(param->bEnableTSkipFast));
H1(" --[no-]splitrd-skip Enable skipping split RD analysis when sum of split CU rdCost larger than one split CU rdCost for Intra CU. Default %s\n", OPT(param->bEnableSplitRdSkip));
H1(" --nr-intra <integer> An integer value in range of 0 to 2000, which denotes strength of noise reduction in intra CUs. Default 0\n");
-------------- next part --------------
A non-text attachment was scrubbed...
Name: x265-final.patch
Type: text/x-patch
Size: 30565 bytes
Desc: not available
URL: <http://mailman.videolan.org/pipermail/x265-devel/attachments/20200129/2570e807/attachment-0001.bin>
More information about the x265-devel
mailing list