[x265] [PATCH] EQT Updates
srikanth.kurapati at multicorewareinc.com
srikanth.kurapati at multicorewareinc.com
Wed May 6 10:15:14 CEST 2020
# HG changeset patch
# User Srikanth Kurapati
# Date 1588752449 -19800
# Wed May 06 13:37:29 2020 +0530
# Node ID df0886d58b867e7bd219ec3f8197bab22417795c
# Parent 303ff9e4546d0052e7a4d359323f0aca84eedd68
EQT Updates.
1. Improves documentation in help and x265readthedocs for rskip cli options.
2. Renamed rskip variable in x265_param structure & rectified regression clis.
3. Removed rskip mode 3 which is same as mode 2 with min-cu-size 16.
diff -r 303ff9e4546d -r df0886d58b86 doc/reST/cli.rst
--- a/doc/reST/cli.rst Wed Apr 15 18:44:54 2020 +0530
+++ b/doc/reST/cli.rst Wed May 06 13:37:29 2020 +0530
@@ -845,31 +845,31 @@
Measure 2Nx2N merge candidates first; if no residual is found,
additional modes at that depth are not analysed. Default disabled
-.. option:: --rskip <0|1|2|3>
-
- This option determines early exit from CU depth recursion in modes 1, 2 and 3. When a skip CU is
- found, additional heuristics (depending on RD level and rskip mode) are used to decide whether
+.. option:: --rskip <0|1|2>
+
+ This option determines early exit from CU depth recursion in modes 1 and 2. When a skip CU is
+ found, additional heuristics (depending on the RD level and rskip mode) are used to decide whether
to terminate recursion. The following table summarizes the behavior.
+----------+------------+----------------------------------------------------------------+
| RD Level | Rskip Mode | Skip Recursion Heuristic |
+==========+============+================================================================+
- | 0 - 4 | 1 | Neighbour costs. |
+ | 0 - 4 | 1 | Neighbour costs and CU homogenity. |
+----------+------------+----------------------------------------------------------------+
| 5 - 6 | 1 | Comparison with inter2Nx2N. |
+----------+------------+----------------------------------------------------------------+
- | 0 - 6 | 2 | CU edge denstiy. |
+ | 0 - 6 | 2 | CU edge density. |
+----------+------------+----------------------------------------------------------------+
- | 0 - 6 | 3 | CU edge denstiy with forceful skip for lower levels of CTU. |
- +----------+------------+----------------------------------------------------------------+
-
+
Provides minimal quality degradation at good performance gains for non-zero modes.
:option:`--rskip mode 0` means disabled. Default: 1, disabled when :option:`--tune grain` is used.
+ This is a integer value representing the edge-density percentage within the CU. Internally normalized to a number between 0.0 to 1.0 in x265.
+ Recommended low thresholds for slow encodes and high for fast encodes.
.. option:: --rskip-edge-threshold <0..100>
Denotes the minimum expected edge-density percentage within the CU, below which the recursion is skipped.
- Default: 5, requires :option:`--rskip mode 2|3` to be enabled.
+ Default: 5, requires :option:`--rskip mode 2` to be enabled.
.. option:: --splitrd-skip, --no-splitrd-skip
diff -r 303ff9e4546d -r df0886d58b86 source/CMakeLists.txt
--- a/source/CMakeLists.txt Wed Apr 15 18:44:54 2020 +0530
+++ b/source/CMakeLists.txt Wed May 06 13:37:29 2020 +0530
@@ -29,7 +29,7 @@
option(STATIC_LINK_CRT "Statically link C runtime for release builds" OFF)
mark_as_advanced(FPROFILE_USE FPROFILE_GENERATE NATIVE_BUILD)
# X265_BUILD must be incremented each time the public API is changed
-set(X265_BUILD 191)
+set(X265_BUILD 192)
configure_file("${PROJECT_SOURCE_DIR}/x265.def.in"
"${PROJECT_BINARY_DIR}/x265.def")
configure_file("${PROJECT_SOURCE_DIR}/x265_config.h.in"
diff -r 303ff9e4546d -r df0886d58b86 source/common/frame.cpp
--- a/source/common/frame.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/common/frame.cpp Wed May 06 13:37:29 2020 +0530
@@ -117,7 +117,7 @@
m_thetaPic = X265_MALLOC(pixel, m_stride * (maxHeight + (m_lumaMarginY * 2)));
}
- if (param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ if (param->recursionSkipMode == EDGE_BASED_RSKIP)
{
uint32_t numCuInWidth = (param->sourceWidth + param->maxCUSize - 1) / param->maxCUSize;
uint32_t numCuInHeight = (param->sourceHeight + param->maxCUSize - 1) / param->maxCUSize;
@@ -283,7 +283,7 @@
X265_FREE(m_thetaPic);
}
- if (m_param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ if (m_param->recursionSkipMode == EDGE_BASED_RSKIP)
{
X265_FREE_ZERO(m_edgeBitPlane);
m_edgeBitPic = NULL;
diff -r 303ff9e4546d -r df0886d58b86 source/common/param.cpp
--- a/source/common/param.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/common/param.cpp Wed May 06 13:37:29 2020 +0530
@@ -198,7 +198,7 @@
param->bEnableWeightedPred = 1;
param->bEnableWeightedBiPred = 0;
param->bEnableEarlySkip = 1;
- param->enableRecursionSkip = 1;
+ param->recursionSkipMode = 1;
param->edgeVarThreshold = 0.05f;
param->bEnableAMP = 0;
param->bEnableRectInter = 0;
@@ -548,7 +548,7 @@
param->maxNumMergeCand = 5;
param->searchMethod = X265_STAR_SEARCH;
param->bEnableTransformSkip = 1;
- param->enableRecursionSkip = 0;
+ param->recursionSkipMode = 0;
param->maxNumReferences = 5;
param->limitReferences = 0;
param->lookaheadSlices = 0; // disabled for best quality
@@ -600,7 +600,7 @@
param->rc.hevcAq = 0;
param->rc.qpStep = 1;
param->rc.bEnableGrain = 1;
- param->enableRecursionSkip = 0;
+ param->recursionSkipMode = 0;
param->psyRd = 4.0;
param->psyRdoq = 10.0;
param->bEnableSAO = 0;
@@ -704,7 +704,7 @@
OPT("ref") p->maxNumReferences = atoi(value);
OPT("fast-intra") p->bEnableFastIntra = atobool(value);
OPT("early-skip") p->bEnableEarlySkip = atobool(value);
- OPT("rskip") p->enableRecursionSkip = atoi(value);
+ OPT("rskip") p->recursionSkipMode = atoi(value);
OPT("rskip-edge-threshold") p->edgeVarThreshold = atoi(value)/100.0f;
OPT("me") p->searchMethod = parseName(value, x265_motion_est_names, bError);
OPT("subme") p->subpelRefine = atoi(value);
@@ -922,7 +922,7 @@
OPT("max-merge") p->maxNumMergeCand = (uint32_t)atoi(value);
OPT("temporal-mvp") p->bEnableTemporalMvp = atobool(value);
OPT("early-skip") p->bEnableEarlySkip = atobool(value);
- OPT("rskip") p->enableRecursionSkip = atoi(value);
+ OPT("rskip") p->recursionSkipMode = atoi(value);
OPT("rdpenalty") p->rdPenalty = atoi(value);
OPT("tskip") p->bEnableTransformSkip = atobool(value);
OPT("no-tskip-fast") p->bEnableTSkipFast = atobool(value);
@@ -1603,9 +1603,9 @@
"RDOQ Level is out of range");
CHECK(param->dynamicRd < 0 || param->dynamicRd > x265_ADAPT_RD_STRENGTH,
"Dynamic RD strength must be between 0 and 4");
- CHECK(param->enableRecursionSkip > 3 || param->enableRecursionSkip < 0,
- "Invalid Recursion skip mode. Valid modes 0,1,2,3");
- if (param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ CHECK(param->recursionSkipMode > 2 || param->recursionSkipMode < 0,
+ "Invalid Recursion skip mode. Valid modes 0,1,2");
+ if (param->recursionSkipMode == EDGE_BASED_RSKIP)
{
CHECK(param->edgeVarThreshold < 0.0f || param->edgeVarThreshold > 1.0f,
"Minimum edge density percentage for a CU should be an integer between 0 to 100");
@@ -1920,8 +1920,8 @@
TOOLVAL(param->psyRdoq, "psy-rdoq=%.2lf");
TOOLOPT(param->bEnableRdRefine, "rd-refine");
TOOLOPT(param->bEnableEarlySkip, "early-skip");
- TOOLVAL(param->enableRecursionSkip, "rskip mode=%d");
- if (param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ TOOLVAL(param->recursionSkipMode, "rskip mode=%d");
+ if (param->recursionSkipMode == EDGE_BASED_RSKIP)
TOOLVAL(param->edgeVarThreshold, "rskip-edge-threshold=%.2f");
TOOLOPT(param->bEnableSplitRdSkip, "splitrd-skip");
TOOLVAL(param->noiseReductionIntra, "nr-intra=%d");
@@ -2080,8 +2080,8 @@
s += sprintf(s, " rd=%d", p->rdLevel);
s += sprintf(s, " selective-sao=%d", p->selectiveSAO);
BOOL(p->bEnableEarlySkip, "early-skip");
- BOOL(p->enableRecursionSkip, "rskip");
- if (p->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ BOOL(p->recursionSkipMode, "rskip");
+ if (p->recursionSkipMode == EDGE_BASED_RSKIP)
s += sprintf(s, " rskip-edge-threshold=%f", p->edgeVarThreshold);
BOOL(p->bEnableFastIntra, "fast-intra");
@@ -2391,7 +2391,7 @@
dst->bSaoNonDeblocked = src->bSaoNonDeblocked;
dst->rdLevel = src->rdLevel;
dst->bEnableEarlySkip = src->bEnableEarlySkip;
- dst->enableRecursionSkip = src->enableRecursionSkip;
+ dst->recursionSkipMode = src->recursionSkipMode;
dst->edgeVarThreshold = src->edgeVarThreshold;
dst->bEnableFastIntra = src->bEnableFastIntra;
dst->bEnableTSkipFast = src->bEnableTSkipFast;
diff -r 303ff9e4546d -r df0886d58b86 source/encoder/analysis.cpp
--- a/source/encoder/analysis.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/encoder/analysis.cpp Wed May 06 13:37:29 2020 +0530
@@ -1272,7 +1272,7 @@
md.pred[PRED_SKIP].cu.initSubCU(parentCTU, cuGeom, qp);
checkMerge2Nx2N_rd0_4(md.pred[PRED_SKIP], md.pred[PRED_MERGE], cuGeom);
- skipRecursion = !!m_param->enableRecursionSkip && md.bestMode;
+ skipRecursion = !!m_param->recursionSkipMode && md.bestMode;
if (m_param->rdLevel)
skipModes = m_param->bEnableEarlySkip && md.bestMode;
}
@@ -1296,7 +1296,7 @@
md.pred[PRED_SKIP].cu.initSubCU(parentCTU, cuGeom, qp);
checkMerge2Nx2N_rd0_4(md.pred[PRED_SKIP], md.pred[PRED_MERGE], cuGeom);
- skipRecursion = !!m_param->enableRecursionSkip && md.bestMode;
+ skipRecursion = !!m_param->recursionSkipMode && md.bestMode;
if (m_param->rdLevel)
skipModes = m_param->bEnableEarlySkip && md.bestMode;
}
@@ -1314,24 +1314,23 @@
skipModes = (m_param->bEnableEarlySkip || m_refineLevel == 2)
&& md.bestMode && md.bestMode->cu.isSkipped(0); // TODO: sa8d threshold per depth
}
- if (md.bestMode && m_param->enableRecursionSkip && !bCtuInfoCheck && !(m_param->bAnalysisType == AVC_INFO && m_param->analysisLoadReuseLevel == 7 && (m_modeFlag[0] || m_modeFlag[1])))
+ if (md.bestMode && m_param->recursionSkipMode && !bCtuInfoCheck && !(m_param->bAnalysisType == AVC_INFO && m_param->analysisLoadReuseLevel == 7 && (m_modeFlag[0] || m_modeFlag[1])))
{
skipRecursion = md.bestMode->cu.isSkipped(0);
if (mightSplit && !skipRecursion)
{
- if (depth >= minDepth && m_param->enableRecursionSkip == RDCOST_BASED_RSKIP)
+ if (depth >= minDepth && m_param->recursionSkipMode == RDCOST_BASED_RSKIP)
{
if (depth)
skipRecursion = recursionDepthCheck(parentCTU, cuGeom, *md.bestMode);
if (m_bHD && !skipRecursion && m_param->rdLevel == 2 && md.fencYuv.m_size != MAX_CU_SIZE)
skipRecursion = complexityCheckCU(*md.bestMode);
}
- else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 && m_param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 && m_param->recursionSkipMode == EDGE_BASED_RSKIP)
{
skipRecursion = complexityCheckCU(*md.bestMode);
}
- else if (m_param->enableRecursionSkip > EDGE_BASED_RSKIP)
- skipRecursion = true;
+
}
}
if (m_param->bAnalysisType == AVC_INFO && md.bestMode && cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
@@ -1981,7 +1980,7 @@
checkInter_rd5_6(md.pred[PRED_2Nx2N], cuGeom, SIZE_2Nx2N, refMasks);
checkBestMode(md.pred[PRED_2Nx2N], cuGeom.depth);
- if (m_param->enableRecursionSkip && depth && m_modeDepth[depth - 1].bestMode)
+ if (m_param->recursionSkipMode && depth && m_modeDepth[depth - 1].bestMode)
skipRecursion = md.bestMode && !md.bestMode->cu.getQtRootCbf(0);
}
if (m_param->analysisLoadReuseLevel > 4 && m_reusePartSize[cuGeom.absPartIdx] == SIZE_2Nx2N)
@@ -2005,7 +2004,7 @@
checkInter_rd5_6(md.pred[PRED_2Nx2N], cuGeom, SIZE_2Nx2N, refMasks);
checkBestMode(md.pred[PRED_2Nx2N], cuGeom.depth);
- if (m_param->enableRecursionSkip && depth && m_modeDepth[depth - 1].bestMode)
+ if (m_param->recursionSkipMode && depth && m_modeDepth[depth - 1].bestMode)
skipRecursion = md.bestMode && !md.bestMode->cu.getQtRootCbf(0);
}
}
@@ -2024,12 +2023,10 @@
checkInter_rd5_6(md.pred[PRED_2Nx2N], cuGeom, SIZE_2Nx2N, refMasks);
checkBestMode(md.pred[PRED_2Nx2N], cuGeom.depth);
- if (m_param->enableRecursionSkip == RDCOST_BASED_RSKIP && depth && m_modeDepth[depth - 1].bestMode)
+ if (m_param->recursionSkipMode == RDCOST_BASED_RSKIP && depth && m_modeDepth[depth - 1].bestMode)
skipRecursion = md.bestMode && !md.bestMode->cu.getQtRootCbf(0);
- else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 && m_param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ else if (cuGeom.log2CUSize >= MAX_LOG2_CU_SIZE - 1 && m_param->recursionSkipMode == EDGE_BASED_RSKIP)
skipRecursion = md.bestMode && complexityCheckCU(*md.bestMode);
- else if (m_param->enableRecursionSkip > EDGE_BASED_RSKIP)
- skipRecursion = true;
}
if (m_param->bAnalysisType == AVC_INFO && md.bestMode && cuGeom.numPartitions <= 16 && m_param->analysisLoadReuseLevel == 7)
skipRecursion = true;
@@ -3538,7 +3535,7 @@
bool Analysis::complexityCheckCU(const Mode& bestMode)
{
- if (m_param->enableRecursionSkip == RDCOST_BASED_RSKIP)
+ if (m_param->recursionSkipMode == RDCOST_BASED_RSKIP)
{
uint32_t mean = 0;
uint32_t homo = 0;
@@ -3563,8 +3560,8 @@
}
else
{
- int blockType = bestMode.cu.m_log2CUSize[0] - 2;
- int shift = bestMode.cu.m_log2CUSize[0] * 2;
+ int blockType = bestMode.cu.m_log2CUSize[0] - LOG2_UNIT_SIZE;
+ int shift = bestMode.cu.m_log2CUSize[0] * LOG2_UNIT_SIZE;
intptr_t stride = m_frame->m_fencPic->m_stride;
intptr_t blockOffsetLuma = bestMode.cu.m_cuPelX + bestMode.cu.m_cuPelY * stride;
uint64_t sum_ss = primitives.cu[blockType].var(m_frame->m_edgeBitPic + blockOffsetLuma, stride);
diff -r 303ff9e4546d -r df0886d58b86 source/encoder/encoder.cpp
--- a/source/encoder/encoder.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/encoder/encoder.cpp Wed May 06 13:37:29 2020 +0530
@@ -1757,7 +1757,7 @@
}
}
}
- if (m_param->enableRecursionSkip >= EDGE_BASED_RSKIP && m_param->bHistBasedSceneCut)
+ if (m_param->recursionSkipMode == EDGE_BASED_RSKIP && m_param->bHistBasedSceneCut)
{
pixel* src = m_edgePic;
primitives.planecopy_pp_shr(src, inFrame->m_fencPic->m_picWidth, inFrame->m_edgeBitPic, inFrame->m_fencPic->m_stride,
@@ -2425,7 +2425,7 @@
encParam->maxNumReferences = param->maxNumReferences; // never uses more refs than specified in stream headers
encParam->bEnableFastIntra = param->bEnableFastIntra;
encParam->bEnableEarlySkip = param->bEnableEarlySkip;
- encParam->enableRecursionSkip = param->enableRecursionSkip;
+ encParam->recursionSkipMode = param->recursionSkipMode;
encParam->searchMethod = param->searchMethod;
/* Scratch buffer prevents me_range from being increased for esa/tesa */
if (param->searchRange < encParam->searchRange)
@@ -3413,7 +3413,7 @@
p->maxNumReferences = zone->maxNumReferences;
p->bEnableFastIntra = zone->bEnableFastIntra;
p->bEnableEarlySkip = zone->bEnableEarlySkip;
- p->enableRecursionSkip = zone->enableRecursionSkip;
+ p->recursionSkipMode = zone->recursionSkipMode;
p->searchMethod = zone->searchMethod;
p->searchRange = zone->searchRange;
p->subpelRefine = zone->subpelRefine;
@@ -5715,7 +5715,7 @@
TOOLCMP(oldParam->maxNumReferences, newParam->maxNumReferences, "ref=%d to %d\n");
TOOLCMP(oldParam->bEnableFastIntra, newParam->bEnableFastIntra, "fast-intra=%d to %d\n");
TOOLCMP(oldParam->bEnableEarlySkip, newParam->bEnableEarlySkip, "early-skip=%d to %d\n");
- TOOLCMP(oldParam->enableRecursionSkip, newParam->enableRecursionSkip, "rskip=%d to %d\n");
+ TOOLCMP(oldParam->recursionSkipMode, newParam->recursionSkipMode, "rskip=%d to %d\n");
TOOLCMP(oldParam->searchMethod, newParam->searchMethod, "me=%d to %d\n");
TOOLCMP(oldParam->searchRange, newParam->searchRange, "merange=%d to %d\n");
TOOLCMP(oldParam->subpelRefine, newParam->subpelRefine, "subme= %d to %d\n");
diff -r 303ff9e4546d -r df0886d58b86 source/encoder/frameencoder.cpp
--- a/source/encoder/frameencoder.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/encoder/frameencoder.cpp Wed May 06 13:37:29 2020 +0530
@@ -448,7 +448,7 @@
m_ssimCnt = 0;
memset(&(m_frame->m_encData->m_frameStats), 0, sizeof(m_frame->m_encData->m_frameStats));
- if (!m_param->bHistBasedSceneCut && m_param->rc.aqMode != X265_AQ_EDGE && m_param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ if (!m_param->bHistBasedSceneCut && m_param->rc.aqMode != X265_AQ_EDGE && m_param->recursionSkipMode == EDGE_BASED_RSKIP)
{
int height = m_frame->m_fencPic->m_picHeight;
int width = m_frame->m_fencPic->m_picWidth;
diff -r 303ff9e4546d -r df0886d58b86 source/encoder/slicetype.cpp
--- a/source/encoder/slicetype.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/encoder/slicetype.cpp Wed May 06 13:37:29 2020 +0530
@@ -519,7 +519,7 @@
if (param->rc.aqMode == X265_AQ_EDGE)
edgeFilter(curFrame, param);
- if (param->rc.aqMode == X265_AQ_EDGE && !param->bHistBasedSceneCut && param->enableRecursionSkip >= EDGE_BASED_RSKIP)
+ if (param->rc.aqMode == X265_AQ_EDGE && !param->bHistBasedSceneCut && param->recursionSkipMode == EDGE_BASED_RSKIP)
{
pixel* src = curFrame->m_edgePic + curFrame->m_fencPic->m_lumaMarginY * curFrame->m_fencPic->m_stride + curFrame->m_fencPic->m_lumaMarginX;
primitives.planecopy_pp_shr(src, curFrame->m_fencPic->m_stride, curFrame->m_edgeBitPic,
diff -r 303ff9e4546d -r df0886d58b86 source/test/regression-tests.txt
--- a/source/test/regression-tests.txt Wed Apr 15 18:44:54 2020 +0530
+++ b/source/test/regression-tests.txt Wed May 06 13:37:29 2020 +0530
@@ -166,10 +166,6 @@
crowd_run_1920x1080_50.yuv, --preset fast --ctu 64 --rskip 2 --rskip-edge-threshold 5 --aq-mode 4
crowd_run_1920x1080_50.yuv, --preset slow --ctu 32 --rskip 2 --rskip-edge-threshold 5 --hist-scenecut --hist-threshold 0.1
crowd_run_1920x1080_50.yuv, --preset slower --ctu 16 --rskip 2 --rskip-edge-threshold 5 --hist-scenecut --hist-threshold 0.1 --aq-mode 4
-crowd_run_1920x1080_50.yuv, --preset faster --ctu 32 --rskip 3 --rskip-edge-threshold 5
-crowd_run_1920x1080_50.yuv, --preset fast --ctu 64 --rskip 3 --rskip-edge-threshold 5 --aq-mode 4
-crowd_run_1920x1080_50.yuv, --preset slow --ctu 32 --rskip 3 --rskip-edge-threshold 5 --hist-scenecut --hist-threshold 0.1
-crowd_run_1920x1080_50.yuv, --preset slower --ctu 16 --rskip 3 --rskip-edge-threshold 5 --hist-scenecut --hist-threshold 0.1 --aq-mode 4
# Main12 intraCost overflow bug test
720p50_parkrun_ter.y4m,--preset medium
diff -r 303ff9e4546d -r df0886d58b86 source/x265.h
--- a/source/x265.h Wed Apr 15 18:44:54 2020 +0530
+++ b/source/x265.h Wed May 06 13:37:29 2020 +0530
@@ -1259,7 +1259,7 @@
/* Enable early CU size decisions to avoid recursing to higher depths.
* Default is enabled */
- int enableRecursionSkip;
+ int recursionSkipMode;
/* Use a faster search method to find the best intra mode. Default is 0 */
int bEnableFastIntra;
diff -r 303ff9e4546d -r df0886d58b86 source/x265cli.cpp
--- a/source/x265cli.cpp Wed Apr 15 18:44:54 2020 +0530
+++ b/source/x265cli.cpp Wed May 06 13:37:29 2020 +0530
@@ -126,9 +126,9 @@
H0(" --[no-]ssim-rd Enable ssim rate distortion optimization, 0 to disable. Default %s\n", OPT(param->bSsimRd));
H0(" --[no-]rd-refine Enable QP based RD refinement for rd levels 5 and 6. Default %s\n", OPT(param->bEnableRdRefine));
H0(" --[no-]early-skip Enable early SKIP detection. Default %s\n", OPT(param->bEnableEarlySkip));
- H0(" --rskip <mode> Set mode for early exit from recursion. Mode 1: exit using rdcost. Mode 2: exit using edge density. Mode 3: exit using edge density with forceful skip for small sized CU's."
- " Mode 0: disabled. Default %s\n", OPT(param->enableRecursionSkip));
- H1(" --rskip-edge-threshold Threshold in terms of percentage (integer of range [0,100]) for minimum edge density in CUs to prun the recursion depth. Applicable only for rskip modes 2 and 3. Default: %.f\n", param->edgeVarThreshold*100.0f);
+ H0(" --rskip <mode> Set mode for early exit from recursion. Mode 1: exit using rdcost & CU homogenity. Mode 2: exit using CU edge density.\n"
+ " Mode 0: disabled. Default %d\n", param->recursionSkipMode);
+ H1(" --rskip-edge-threshold Threshold in terms of percentage (integer of range [0,100]) for minimum edge density in CUs used to prun the recursion depth. Applicable only for rskip mode 2. Value is preset dependent. Default: %.f\n", param->edgeVarThreshold*100.0f);
H1(" --[no-]tskip-fast Enable fast intra transform skipping. Default %s\n", OPT(param->bEnableTSkipFast));
H1(" --[no-]splitrd-skip Enable skipping split RD analysis when sum of split CU rdCost larger than one split CU rdCost for Intra CU. Default %s\n", OPT(param->bEnableSplitRdSkip));
H1(" --nr-intra <integer> An integer value in range of 0 to 2000, which denotes strength of noise reduction in intra CUs. Default 0\n");
-------------- next part --------------
A non-text attachment was scrubbed...
Name: x265-3.4_final.patch
Type: text/x-patch
Size: 23200 bytes
Desc: not available
URL: <http://mailman.videolan.org/pipermail/x265-devel/attachments/20200506/eef2bff4/attachment-0001.bin>
More information about the x265-devel
mailing list