[dvblast-devel] Streaming dvb-c with CI modules

[Вячеслав Адаманов]

What CA system you are using?

2011/12/14 Hai Anh Tran <haianhtran1986 at gmail.com>

> > Normally there is nothing to configure ; it should start descrambling as
> soon as you insert the CAM. However, in my experience with the Netup
> DVB-T/C card, the system crashes as soon as I insert a CAM. I would be
> interested to know if you have the same problem.
> I don't have the same problem, but the CAM couldn't descramble services
> when i insert it into CI Slot. I checked dmesg and get this line:
> [   22.809425] dvb_ca adapter 1: DVB CAM detected and initialised
> successfully
>
> > I am use dvblast with DVB-S/S2 card ...
> If acces card properly activated, dvblast decoded stream automaticaly.
> In dvblast conf file you choose only multicast group and other parametrs.
>
> DVBLAST don`t have special swith decode/no decode .
>
> You can see some strings in output of dvblast, like this:
> debug: CI slot 0 is active
> debug: opening ResourceManager session (1)
> debug: opening ApplicationInformation session (2)
> info: CAM: DREcrypt NP4+ , 01, 4A60, 0001
> debug: opening ConditionalAccess session (3)
> debug: CA system IDs supported by the application :
> debug: - 0x4ae0
> debug: - 0x4ae1
> debug: - 0x4ae5
> debug: adding first CAPMT for SID 31020 on session 3
>
>
> If you see it, than you CI module is activated.
> DVBlast streams this stream in you network.
>
> I just see these messages:
>   debug: CA interface with 1 slot
>   debug:   CI link layer level interface type
>   debug:   0 available descramblers (keys)
> I mean we have to choose which channels will be descrambled with which CI
> slot, because if you have about 10 encrypted channels, and you just want to
> descramble some of them, that you have to define them.
> By the way, how can i check CAM parameters when inserting it into CI slot?
>
>
> 2011/12/14 Kompan Kolia <kompan at yandex.ru>
>
>> I am use dvblast with DVB-S/S2 card ...
>> If acces card properly activated, dvblast decoded stream automaticaly.
>> In dvblast conf file you choose only multicast group and other parametrs.
>>
>> DVBLAST don`t have special swith decode/no decode .
>>
>> You can see some strings in output of dvblast, like this:
>> debug: CI slot 0 is active
>> debug: opening ResourceManager session (1)
>> debug: opening ApplicationInformation session (2)
>> info: CAM: DREcrypt NP4+ , 01, 4A60, 0001
>> debug: opening ConditionalAccess session (3)
>> debug: CA system IDs supported by the application :
>> debug: - 0x4ae0
>> debug: - 0x4ae1
>> debug: - 0x4ae5
>> debug: adding first CAPMT for SID 31020 on session 3
>>
>>
>> If you see it, than you CI module is activated.
>> DVBlast streams this stream in you network.
>>
>>
>>
>> 14.12.2011, 11:12, "Tran Hai Anh" <haianhtran1986 at gmail.com>:
>> > Anyone can help me?
>> >
>> > In my streaming project, all I have now are:
>> >         - NetUP Dual DVB-T-C-CI card.
>> >         - Linux server with Kernel 3.0.0-netup and drivers already
>> > (adapter0, ca0, demux0, frontend0/1, ...)
>> >         - DVB-C source with some channels are free, and some channels
>> are
>> > encrypted.
>> >         - The free channels are tuned out succesfully with dvblast
>> command:
>> >         Dvblast -a 0 -n 1 -f 802000000 -s 6956000 -m qam_64 -u -c
>> > channels.conf
>> >         In the config file "channels.conf", I have:
>> >                 :channel 1 - Free
>> >                 239.10.1.1:5500/udp 1 201
>> >                 :channel 2 - Encrypted
>> >                 239.10.1.2:5500/udp 1 202
>> >
>> > My question is: with encrypted channels, how can I configure the CA
>> modules
>> > to decrypt these channels in "channels.conf" file?
>> > Any one ever worked same project? Please suggest me some idea.
>> >
>> > Thanks very much!
>> >
>> > -----Original Message-----
>> > From: Tran Hai Anh [mailto:haianhtran1986 at gmail.com]
>> > Sent: Tuesday, December 13, 2011 9:10 AM
>> > To: 'Mailing list for DVBlast developers'
>> > Subject: RE: [dvblast-devel] Streaming dvb-c with CI modules
>> >
>> > Dear,
>> >
>> > I'm using NetUP Dual DVB-T-C-CI card and drivers provided by NetUP.
>> Please
>> > reference at this page:
>> http://www.netup.tv/en-EN/dual_dvb-t-c-ci_card.php
>> > I'm also using dvblast for streaming output.
>> >
>> > Thanks!
>> >
>> > -----Original Message-----
>> > From: dvblast-devel-bounces at videolan.org
>> > [mailto:dvblast-devel-bounces at videolan.org] On Behalf Of Georgi
>> > Chorbadzhiyski
>> > Sent: Monday, December 12, 2011 5:24 PM
>> > To: Mailing list for DVBlast developers
>> > Subject: Re: [dvblast-devel] Streaming dvb-c with CI modules
>> >
>> > Around 12/12/2011 10:58 AM, Tran Hai Anh scribbled:
>> >
>> >>  Could you please show me the way to work with CI modules? Which
>> >
>> > applications
>> >
>> >>  or commands do I need? Please let me know your experiences in this
>> issues.
>> >
>> > What is the model of the card and what driver are you using?
>> >
>> > --
>> > Georgi Chorbadzhiyski
>> > http://georgi.unixsol.org/
>> > _______________________________________________
>> > dvblast-devel mailing list
>> > dvblast-devel at videolan.org
>> > http://mailman.videolan.org/listinfo/dvblast-devel
>> >
>> > _______________________________________________
>> > dvblast-devel mailing list
>> > dvblast-devel at videolan.org
>> > http://mailman.videolan.org/listinfo/dvblast-devel
>> _______________________________________________
>> dvblast-devel mailing list
>> dvblast-devel at videolan.org
>> http://mailman.videolan.org/listinfo/dvblast-devel
>>
>
>
>
> --
> Thanks & Best Regards!
> ****************************
> Tran Hai Anh
> Mobile: (+84) 912.701.235
> Mail: haianhtran1986 at gmail.com
>
>
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> http://mailman.videolan.org/listinfo/dvblast-devel
>
>


-- 
__________________________
Vyacheslav Adamanov
87500, Ukraine, Mariupol,
st. Apatova 136а
mob: +38 (067) 621 32 61
email: adamanov at gmail.com
www: http://hl.ua
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20111214/5e5ea372/attachment.html>