[dvblast-devel] Streaming dvb-c with CI modules
Вячеслав Адаманов
adamanov at gmail.com
Wed Dec 14 10:28:27 CET 2011
If you use BISS, add keys via dvblast_mmi.sh
2011/12/14 Вячеслав Адаманов <adamanov at gmail.com>
> What CA system you are using?
>
>
> 2011/12/14 Hai Anh Tran <haianhtran1986 at gmail.com>
>
>> > Normally there is nothing to configure ; it should start descrambling
>> as soon as you insert the CAM. However, in my experience with the Netup
>> DVB-T/C card, the system crashes as soon as I insert a CAM. I would be
>> interested to know if you have the same problem.
>> I don't have the same problem, but the CAM couldn't descramble services
>> when i insert it into CI Slot. I checked dmesg and get this line:
>> [ 22.809425] dvb_ca adapter 1: DVB CAM detected and initialised
>> successfully
>>
>> > I am use dvblast with DVB-S/S2 card ...
>> If acces card properly activated, dvblast decoded stream automaticaly.
>> In dvblast conf file you choose only multicast group and other parametrs.
>>
>> DVBLAST don`t have special swith decode/no decode .
>>
>> You can see some strings in output of dvblast, like this:
>> debug: CI slot 0 is active
>> debug: opening ResourceManager session (1)
>> debug: opening ApplicationInformation session (2)
>> info: CAM: DREcrypt NP4+ , 01, 4A60, 0001
>> debug: opening ConditionalAccess session (3)
>> debug: CA system IDs supported by the application :
>> debug: - 0x4ae0
>> debug: - 0x4ae1
>> debug: - 0x4ae5
>> debug: adding first CAPMT for SID 31020 on session 3
>>
>>
>> If you see it, than you CI module is activated.
>> DVBlast streams this stream in you network.
>>
>> I just see these messages:
>> debug: CA interface with 1 slot
>> debug: CI link layer level interface type
>> debug: 0 available descramblers (keys)
>> I mean we have to choose which channels will be descrambled with which CI
>> slot, because if you have about 10 encrypted channels, and you just want to
>> descramble some of them, that you have to define them.
>> By the way, how can i check CAM parameters when inserting it into CI slot?
>>
>>
>> 2011/12/14 Kompan Kolia <kompan at yandex.ru>
>>
>>> I am use dvblast with DVB-S/S2 card ...
>>> If acces card properly activated, dvblast decoded stream automaticaly.
>>> In dvblast conf file you choose only multicast group and other parametrs.
>>>
>>> DVBLAST don`t have special swith decode/no decode .
>>>
>>> You can see some strings in output of dvblast, like this:
>>> debug: CI slot 0 is active
>>> debug: opening ResourceManager session (1)
>>> debug: opening ApplicationInformation session (2)
>>> info: CAM: DREcrypt NP4+ , 01, 4A60, 0001
>>> debug: opening ConditionalAccess session (3)
>>> debug: CA system IDs supported by the application :
>>> debug: - 0x4ae0
>>> debug: - 0x4ae1
>>> debug: - 0x4ae5
>>> debug: adding first CAPMT for SID 31020 on session 3
>>>
>>>
>>> If you see it, than you CI module is activated.
>>> DVBlast streams this stream in you network.
>>>
>>>
>>>
>>> 14.12.2011, 11:12, "Tran Hai Anh" <haianhtran1986 at gmail.com>:
>>> > Anyone can help me?
>>> >
>>> > In my streaming project, all I have now are:
>>> > - NetUP Dual DVB-T-C-CI card.
>>> > - Linux server with Kernel 3.0.0-netup and drivers already
>>> > (adapter0, ca0, demux0, frontend0/1, ...)
>>> > - DVB-C source with some channels are free, and some channels
>>> are
>>> > encrypted.
>>> > - The free channels are tuned out succesfully with dvblast
>>> command:
>>> > Dvblast -a 0 -n 1 -f 802000000 -s 6956000 -m qam_64 -u -c
>>> > channels.conf
>>> > In the config file "channels.conf", I have:
>>> > :channel 1 - Free
>>> > 239.10.1.1:5500/udp 1 201
>>> > :channel 2 - Encrypted
>>> > 239.10.1.2:5500/udp 1 202
>>> >
>>> > My question is: with encrypted channels, how can I configure the CA
>>> modules
>>> > to decrypt these channels in "channels.conf" file?
>>> > Any one ever worked same project? Please suggest me some idea.
>>> >
>>> > Thanks very much!
>>> >
>>> > -----Original Message-----
>>> > From: Tran Hai Anh [mailto:haianhtran1986 at gmail.com]
>>> > Sent: Tuesday, December 13, 2011 9:10 AM
>>> > To: 'Mailing list for DVBlast developers'
>>> > Subject: RE: [dvblast-devel] Streaming dvb-c with CI modules
>>> >
>>> > Dear,
>>> >
>>> > I'm using NetUP Dual DVB-T-C-CI card and drivers provided by NetUP.
>>> Please
>>> > reference at this page:
>>> http://www.netup.tv/en-EN/dual_dvb-t-c-ci_card.php
>>> > I'm also using dvblast for streaming output.
>>> >
>>> > Thanks!
>>> >
>>> > -----Original Message-----
>>> > From: dvblast-devel-bounces at videolan.org
>>> > [mailto:dvblast-devel-bounces at videolan.org] On Behalf Of Georgi
>>> > Chorbadzhiyski
>>> > Sent: Monday, December 12, 2011 5:24 PM
>>> > To: Mailing list for DVBlast developers
>>> > Subject: Re: [dvblast-devel] Streaming dvb-c with CI modules
>>> >
>>> > Around 12/12/2011 10:58 AM, Tran Hai Anh scribbled:
>>> >
>>> >> Could you please show me the way to work with CI modules? Which
>>> >
>>> > applications
>>> >
>>> >> or commands do I need? Please let me know your experiences in this
>>> issues.
>>> >
>>> > What is the model of the card and what driver are you using?
>>> >
>>> > --
>>> > Georgi Chorbadzhiyski
>>> > http://georgi.unixsol.org/
>>> > _______________________________________________
>>> > dvblast-devel mailing list
>>> > dvblast-devel at videolan.org
>>> > http://mailman.videolan.org/listinfo/dvblast-devel
>>> >
>>> > _______________________________________________
>>> > dvblast-devel mailing list
>>> > dvblast-devel at videolan.org
>>> > http://mailman.videolan.org/listinfo/dvblast-devel
>>> _______________________________________________
>>> dvblast-devel mailing list
>>> dvblast-devel at videolan.org
>>> http://mailman.videolan.org/listinfo/dvblast-devel
>>>
>>
>>
>>
>> --
>> Thanks & Best Regards!
>> ****************************
>> Tran Hai Anh
>> Mobile: (+84) 912.701.235
>> Mail: haianhtran1986 at gmail.com
>>
>>
>> _______________________________________________
>> dvblast-devel mailing list
>> dvblast-devel at videolan.org
>> http://mailman.videolan.org/listinfo/dvblast-devel
>>
>>
>
>
> --
> __________________________
> Vyacheslav Adamanov
> 87500, Ukraine, Mariupol,
> st. Apatova 136а
> mob: +38 (067) 621 32 61
> email: adamanov at gmail.com
> www: http://hl.ua
>
--
__________________________
Vyacheslav Adamanov
87500, Ukraine, Mariupol,
st. Apatova 136а
mob: +38 (067) 621 32 61
email: adamanov at gmail.com
www: http://hl.ua
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20111214/758f95a8/attachment-0001.html>
More information about the dvblast-devel
mailing list