[dvblast-devel] dvblast & remote CAM decoding

[Ahmed Ramze]

Hello

its depends on the stream type almost not working for example if you can do it its mean you can decrypt stream remotely which its can you share its over multiple streams like what happened with CCAM or NewCAM servers.

Tunner and CAMs on new version of IRDETO and NDS etc the secure version (chip peering) must be together with Tunner 

in details you can not read or send or modify EMM or ECM on server decrypt must be on CHIP not on server.

I hope you understand that , we have same issue with OSN,beIN etc they use secure IRDETO.

Regards 

Eng.Ahmed Ramze
CEO
HighSpeedTelecom.Net
+961-76688533
+964-7804445566



> On 30 May 2018, at 02:04, Ibrahim Tachijian <barhom at netsat.se> wrote:
> 
> Thank you for your quick response.
> 
> We know that we can use a dvb adapter with built in CI. This was not the question in this case.
> 
> We would like to keep the CAM module and smart card remote, on a server which is not downlinking the channel.
> One such example would be, for example, to include support on tsdecrypt to interface with a CAM module such as the Digital Devices Single CI Slot.
> 
> Does anyone know if we can use a combination of software today? Or have the know how on how to develop software that can do this? 
> 
> Please contact me then,
> 
> Thanks,
> 
> 
>> On Wed, May 30, 2018 at 12:53 AM Ahmed Ramze <ahmedramze at gmail.com> wrote:
>> Hello
>> 
>> DVB-Last support CI interface its better to use the DVB Card with CI , if you want to decrypt the output of dvblast you need to use TSdecrpt software but you will lost refresh PIDs (Signal) to update your irdeto mabe with 1 day or one week.
>> if you want better advice we have Professional IRDs with 8 DVB-S2  tunner each tunner with CI interface to use for decrypt the channels and support also MUX/PID/ remap  and output MPTS and 8 SPTS multicast UDP or RTP.
>> 
>> any help you can contact me on info at highspeedtelecom.net
>> 
>> Regards 
>> 
>> Eng.Ahmed Ramze
>> CEO
>> HighSpeedTelecom.Net
>> +961-76688533
>> +964-7804445566
>> 
>> 
>> 
>>> On 30 May 2018, at 01:36, Ibrahim Tachijian <barhom at netsat.se> wrote:
>>> 
>>> Hey,
>>> 
>>> It is possible to configure dvblast to forward the raw encrypted stream of a channel. This we know and this works very well.
>>> What I do not know is how I can decrypt this stream using a remote CAM module.
>>> Server1
>>> dvblast running and sending the raw encrypted stream to 239.200.0.1:1234
>>> Server2
>>> Holds the CAM module and smartcard
>>> What kind of software can I run here that would read 239.200.0.1:1234, send the packets to the CAM module and return me the unencrypted stream?
>>> We were thinking of using the Digital Devices Single CI Slot.
>>> 
>>> DISCLAIMER:
>>> We have official Irdeto2 CAM module and Smartcard from the broadcaster with proper licenses for re-broadcasting this particular channel.
>> 
>>> _______________________________________________
>>> dvblast-devel mailing list
>>> dvblast-devel at videolan.org
>>> https://mailman.videolan.org/listinfo/dvblast-devel
>> _______________________________________________
>> dvblast-devel mailing list
>> dvblast-devel at videolan.org
>> https://mailman.videolan.org/listinfo/dvblast-devel
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> https://mailman.videolan.org/listinfo/dvblast-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20180530/81943dc5/attachment-0001.html>