[dvblast-devel] (no subject)

[Christophe Massiot]

You appear to have an issue with your DVB card: it locks but the dvr device doesn't output anything. Either the card is broken, or the driver is buggy. Try with another card type.

> On 31 Jul 2025, at 12:54, Андрей Кошкош <andreykosh000 at mail.ru> wrote:
> 
> Hello. I have error when try to broadcast. It resetting and doesnt broadcast
>  
> root at server:~# dvblast -f 12285000 -s 29700000 -S 1 -m psk_8 -R 25 -5 DVBS2 -v 13 -U -F 23 -c dvblast1.conf
> DVBlast 3.4 (git-3.4-25-g74b2973)
> warning: restarting
> warning: raw UDP output is deprecated.  Please consider using RTP.
> warning: for DVB-IP compliance you should use RTP.
> debug: compiled with DVB API version 5.12
> debug: using DVB API version 5.12
> debug: Frontend "Montage Technology M88DS3103" supports:
> debug:  frequency min: 950000, max: 2150000, stepsize: 0, tolerance: 5000
> debug:  symbolrate min: 1000000, max: 45000000, tolerance: 0
> debug:  capabilities:
> debug:   INVERSION_AUTO
> debug:   FEC_1_2
> debug:   FEC_2_3
> debug:   FEC_3_4
> debug:   FEC_4_5
> debug:   FEC_5_6
> debug:   FEC_6_7
> debug:   FEC_7_8
> debug:   FEC_8_9
> debug:   FEC_AUTO
> debug:   QPSK
> debug:   2G_MODULATION
> debug:   FE_CAN_RECOVER
> debug:  delivery systems:
> debug:   DVBS
> debug:   DVBS2
> debug: frequency 12285000 is in Ku-band (higher)
> debug: configuring LNB to v=13 p=0 satnum=1 uncommitted=0 lnb-type=universal bis_frequency=1685000
> debug: tuning DVB-S frontend to f=12285000 srate=29700000 inversion=-1 fec=23 rolloff=25 modulation=psk_8 pilot=-1 mis=0 /pls-mode: ROOT (0) pls-code: 0 is-id: 0 /
> warning: failed opening CAM device /dev/dvb/adapter0/ca0 (No such file or directory)
> debug: setting filter on PID 0
> debug: setting filter on PID 16
> debug: setting filter on PID 17
> debug: setting filter on PID 18
> debug: setting filter on PID 19
> debug: setting filter on PID 20
> debug: conf: 225.0.0.1:1234/udp/ifindex=2 config=0x9 sid=9164 pids[0]
> debug: change sid tsid 
> debug: frontend has acquired signal
> debug: frontend has acquired carrier
> debug: frontend has acquired stable FEC
> debug: frontend has acquired sync
> info: frontend has acquired lock
> lock status: 1
> debug: - Bit error rate: 0
> debug: - Signal strength: 16383
> debug: - SNR: 95
> warning: no DVR output, resetting
> reset cause: dvr
> debug: frequency 12285000 is in Ku-band (higher)
> debug: configuring LNB to v=13 p=0 satnum=1 uncommitted=0 lnb-type=universal bis_frequency=1685000
> debug: tuning DVB-S frontend to f=12285000 srate=29700000 inversion=-1 fec=23 rolloff=25 modulation=psk_8 pilot=-1 mis=0 /pls-mode: ROOT (0) pls-code: 0 is-id: 0 /
> debug: frontend has acquired signal
> debug: frontend has acquired carrier
> debug: frontend has acquired stable FEC
> debug: frontend has acquired sync
> info: frontend has acquired lock
> lock status: 1
> debug: - Bit error rate: 0
> debug: - Signal strength: 20315
> debug: - SNR: 90
>  
>  
> С уважением, Андрей Кошкош
> 
> andreykosh000 at mail.ru
> _______________________________________________
> dvblast-devel mailing list
> dvblast-devel at videolan.org
> https://mailman.videolan.org/listinfo/dvblast-devel