[dvblast-devel] (no subject)

[Андрей Кошкош]

Hello. I have error when try to broadcast. It resetting and doesnt broadcast
 
root at server:~# dvblast -f 12285000 -s 29700000 -S 1 -m psk_8 -R 25 -5 DVBS2 -v 13 -U -F 23 -c dvblast1.conf
DVBlast 3.4 (git-3.4-25-g74b2973)
warning: restarting
warning: raw UDP output is deprecated.  Please consider using RTP.
warning: for DVB-IP compliance you should use RTP.
debug: compiled with DVB API version 5.12
debug: using DVB API version 5.12
debug: Frontend "Montage Technology M88DS3103" supports:
debug:  frequency min: 950000, max: 2150000, stepsize: 0, tolerance: 5000
debug:  symbolrate min: 1000000, max: 45000000, tolerance: 0
debug:  capabilities:
debug:   INVERSION_AUTO
debug:   FEC_1_2
debug:   FEC_2_3
debug:   FEC_3_4
debug:   FEC_4_5
debug:   FEC_5_6
debug:   FEC_6_7
debug:   FEC_7_8
debug:   FEC_8_9
debug:   FEC_AUTO
debug:   QPSK
debug:   2G_MODULATION
debug:   FE_CAN_RECOVER
debug:  delivery systems:
debug:   DVBS
debug:   DVBS2
debug: frequency 12285000 is in Ku-band (higher)
debug: configuring LNB to v=13 p=0 satnum=1 uncommitted=0 lnb-type=universal bis_frequency=1685000
debug: tuning DVB-S frontend to f=12285000 srate=29700000 inversion=-1 fec=23 rolloff=25 modulation=psk_8 pilot=-1 mis=0 /pls-mode: ROOT (0) pls-code: 0 is-id: 0 /
warning: failed opening CAM device /dev/dvb/adapter0/ca0 (No such file or directory)
debug: setting filter on PID 0
debug: setting filter on PID 16
debug: setting filter on PID 17
debug: setting filter on PID 18
debug: setting filter on PID 19
debug: setting filter on PID 20
debug: conf: 225.0.0.1:1234/udp/ifindex=2 config=0x9 sid=9164 pids[0]
debug: change sid tsid 
debug: frontend has acquired signal
debug: frontend has acquired carrier
debug: frontend has acquired stable FEC
debug: frontend has acquired sync
info: frontend has acquired lock
lock status: 1
debug: - Bit error rate: 0
debug: - Signal strength: 16383
debug: - SNR: 95
warning: no DVR output, resetting
reset cause: dvr
debug: frequency 12285000 is in Ku-band (higher)
debug: configuring LNB to v=13 p=0 satnum=1 uncommitted=0 lnb-type=universal bis_frequency=1685000
debug: tuning DVB-S frontend to f=12285000 srate=29700000 inversion=-1 fec=23 rolloff=25 modulation=psk_8 pilot=-1 mis=0 /pls-mode: ROOT (0) pls-code: 0 is-id: 0 /
debug: frontend has acquired signal
debug: frontend has acquired carrier
debug: frontend has acquired stable FEC
debug: frontend has acquired sync
info: frontend has acquired lock
lock status: 1
debug: - Bit error rate: 0
debug: - Signal strength: 20315
debug: - SNR: 90
 
 
С уважением, Андрей Кошкош

andreykosh000 at mail.ru
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.videolan.org/pipermail/dvblast-devel/attachments/20250731/cb9ec1dd/attachment.htm>